Download or read book Heterogeneous Gold Catalysts and Catalysis written by Zhen Ma and published by Royal Society of Chemistry. This book was released on 2014-08-20 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: Once considered an inert element, gold has recently gained attention as a catalyst. With hundreds of papers being published each year, this book presents a comprehensive review of this rapidly-evolving field, with contributions by leading experts across the globe. Going through the chapters citing the primary literature, the reader will gain a thorough background to the use of gold in catalysis, as well as the latest methods for the preparation of gold catalysts. Other chapters demonstrate the characterisation and modelling of gold-catalysed reactions, with consideration given to both the fundamentals and commercial applications of this emerging group of catalysts. Written to be accessible by postgraduates and newcomers to the field, this book will also benefit experienced researchers and therefore be an essential reference in the laboratory.

Download or read book Catalysis By Gold written by Geoffrey C Bond and published by World Scientific. This book was released on 2006-08-15 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gold has traditionally been regarded as inactive as a catalytic metal. However, the advent of nanoparticulate gold on high surface area oxide supports has demonstrated its high catalytic activity in many chemical reactions. Gold is active as a heterogeneous catalyst in both gas and liquid phases, and complexes catalyse reactions homogeneously in solution. Many of the reactions being studied will lead to new application areas for catalysis by gold in pollution control, chemical processing, sensors and fuel cell technology. This book describes the properties of gold, the methods for preparing gold catalysts and ways to characterise and use them effectively in reactions. The reaction mechanisms and reasons for the high activities are discussed and the applications for gold catalysis considered./a

Download or read book Comprehensive Nanoscience and Technology written by and published by Academic Press. This book was released on 2010-10-29 with total page 2785 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the Introduction: Nanotechnology and its underpinning sciences are progressing with unprecedented rapidity. With technical advances in a variety of nanoscale fabrication and manipulation technologies, the whole topical area is maturing into a vibrant field that is generating new scientific research and a burgeoning range of commercial applications, with an annual market already at the trillion dollar threshold. The means of fabricating and controlling matter on the nanoscale afford striking and unprecedented opportunities to exploit a variety of exotic phenomena such as quantum, nanophotonic and nanoelectromechanical effects. Moreover, researchers are elucidating new perspectives on the electronic and optical properties of matter because of the way that nanoscale materials bridge the disparate theories describing molecules and bulk matter. Surface phenomena also gain a greatly increased significance; even the well-known link between chemical reactivity and surface-to-volume ratio becomes a major determinant of physical properties, when it operates over nanoscale dimensions. Against this background, this comprehensive work is designed to address the need for a dynamic, authoritative and readily accessible source of information, capturing the full breadth of the subject. Its six volumes, covering a broad spectrum of disciplines including material sciences, chemistry, physics and life sciences, have been written and edited by an outstanding team of international experts. Addressing an extensive, cross-disciplinary audience, each chapter aims to cover key developments in a scholarly, readable and critical style, providing an indispensible first point of entry to the literature for scientists and technologists from interdisciplinary fields. The work focuses on the major classes of nanomaterials in terms of their synthesis, structure and applications, reviewing nanomaterials and their respective technologies in well-structured and comprehensive articles with extensive cross-references. It has been a constant surprise and delight to have found, amongst the rapidly escalating number who work in nanoscience and technology, so many highly esteemed authors willing to contribute. Sharing our anticipation of a major addition to the literature, they have also captured the excitement of the field itself in each carefully crafted chapter. Along with our painstaking and meticulous volume editors, full credit for the success of this enterprise must go to these individuals, together with our thanks for (largely) adhering to the given deadlines. Lastly, we record our sincere thanks and appreciation for the skills and professionalism of the numerous Elsevier staff who have been involved in this project, notably Fiona Geraghty, Megan Palmer and Greg Harris, and especially Donna De Weerd-Wilson who has steered it through from its inception. We have greatly enjoyed working with them all, as we have with each other.

Download or read book Transition Metal Catalysis in Aerobic Alcohol Oxidation written by Francesca Cardona and published by Royal Society of Chemistry. This book was released on 2015 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the search for environmentally benign procedures for the oxidation of alcohols and gives an overview of their transition-metal-catalyzed aerobic oxidation.

Download or read book Modern Oxidation Methods written by Jan-Erling Bäckvall and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the very latest, with the award of the 2001 Nobel Prize for work on asymmetric oxidation, there has been a need for a comprehensive book on such methods. Edited by J.-E. Backvall, one of the world's leaders in the field, this book fills that gap by covering the topic, from classical to green chemistry methods. He has put together a plethora of well-established authors from all over the world who cover every important aspect in high-quality contributions -- whether aerobic oxidation or transition metal-catalyzed epoxidation of alkenes. By providing an overview of this huge topic, this book represents an unparalleled aid for any chemist working in the field. Chapters include: Recent Developments in the Osmium-Catalyzed Dihydroxylation of Olefins Transition Metal-Catalyzed Epoxidation of Alkenes Organocatalytic Oxidation - Ketone-Catalyzed Asymmetric Epoxidation of Olefins Modern Oxidation of Alcohols using environmentally Benign Oxidants Aerobic Oxidations and Related Reactions Catalyzed by N-Hydroxyphthalimide Ruthenium-Catalyzed Oxidation of Alkenes, Alcohols, Amines, Amides, b-Lactams, Phenols, and Hydrocarbons Selective Oxidations of Sulfides and Amines Liquid Phase Oxidation Reactions Catalyzed by Polyoxometalates Oxidation of Carbonyl Compounds Mn-catalysed Oxidation with Hydrogen Peroxide

Download or read book Science and Technology in Catalysis written by Masakazu Anpo and published by Gulf Professional Publishing. This book was released on 2003-07-09 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: (Selected) -- Plenary Lecures: New Catalysts for Controlled/Living Atom Transfer Radical Polymerization (ATRP; Catalysis and Applications of Gold Nanoparticles -- Oral Presentations: Ionic Liquids as New Solvents and Catalysis for Petrochemical and Refining Processes; High Throughput Experiment on the Investigation of Oxidation Catalysts with Gas Sensor System -- Poster Presentations: Development of a Low-Temperature Dioxin Decomposition Catalyst; Studies on Unique Properties of Polyolefins Prepared with Metallocene Catalyst Systems -- Index.

Download or read book Modern Heterogeneous Oxidation Catalysis written by Noritaka Mizuno and published by John Wiley & Sons. This book was released on 2009-11-18 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling a gap in the current literature, this comprehensive reference presents all important catalyst classes, including metal oxides, polyoxometalates, and zeolites. Readers will find here everything they need to know -- from structure design to characterization, and from immobilization to industrial processes. A true must-have for anyone working in this key technology.

Download or read book Catalysis for Clean Energy and Environmental Sustainability written by K. K. Pant and published by Springer Nature. This book was released on 2021-04-01 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is part of a two-volume work that offers a unique blend of information on realistic evaluations of catalyst-based synthesis processes using green chemistry principles and the environmental sustainability applications of such processes for biomass conversion, refining, and petrochemical production. The volumes provide a comprehensive resource of state-of-the-art technologies and green chemistry methodologies from researchers, academics, and chemical and manufacturing industrial scientists. The work will be of interest to professors, researchers, and practitioners in clean energy catalysis, green chemistry, chemical engineering and manufacturing, and environmental sustainability. This volume focuses on catalyst synthesis and green chemistry applications for petrochemical and refining processes. While most books on the subject focus on catalyst use for conventional crude, fuel-oriented refineries, this book emphasizes recent transitions to petrochemical refineries with the goal of evaluating how green chemistry applications can produce clean energy through petrochemical industrial means. The majority of the chapters are contributed by industrial researchers and technicians and address various petrochemical processes, including hydrotreating, hydrocracking, flue gas treatment and isomerization catalysts.

Download or read book Iron Catalysis written by Bernd Plietker and published by Springer Science & Business Media. This book was released on 2011-01-05 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Juan I. Padrón and Víctor S. Martín: Catalysis by means of Fe-based Lewis acids; Hiroshi Nakazawa*, Masumi Itazaki: Fe–H Complexes in Catalysis; Kristin Schröder, Kathrin Junge, Bianca Bitterlich, and Matthias Beller: Fe-catalyzed Oxidation Reactions of Olefins, Alkanes and Alcohols: Involvement of Oxo- and Peroxo Complexes; Chi-Ming Che, Cong-Ying Zhou, Ella Lai-Ming Wong: Catalysis by Fe=X Complexes (X=NR, CR2); René Peters, Daniel F. Fischer and Sascha Jautze: Ferrocene and Half Sandwich Complexes as Catalysts with Iron Participation; Markus Jegelka, Bernd Plietker: Catalysis by Means of Complex Ferrates.

Download or read book Nanocomposites for Visible Light induced Photocatalysis written by Mohammad Mansoob Khan and published by Springer. This book was released on 2017-09-07 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the chemistry of visible light-induced photocatalysis using different classes of nanocomposites. Starting with a general introduction and explanation of basic principles and mechanisms of (visible) light-induced photocatalysis in the first two chapters (not omitting a plaidoyer for furthering research and development in this promising field), the following chapters detail the different types and classes of nanocomposites currently used in light-induced photocatalytic applications, including e.g. metal and mixed metal-oxide nanoparticles and –composites, nanoporous materials, polymeric and carbon-based nanocomposites. They explain the characteristics and importance of the different types of nanocomposites, as well as their synthesis and fabrication.In the end of the book an outlook on the unique applications of novel nanocomposites is offered, for example in water treatment and disinfection and removal of pollutants from wastewater, self-cleaning window panes based on photoactive materials, and many more. The book also addresses the challenges in present photocatalytic research, and therefore is a must-read for everybody interested in the developing field of nanocomposites and visible light-induced photocatalysis.

Download or read book Metal Oxides in Heterogeneous Catalysis written by Jacques C. Vedrine and published by Elsevier. This book was released on 2018-01-11 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides in Heterogeneous Catalysis is an overview of the past, present and future of heterogeneous catalysis using metal oxides catalysts. The book presents the historical, theoretical, and practical aspects of metal oxide-based heterogeneous catalysis. Metal Oxides in Heterogeneous Catalysis deals with fundamental information on heterogeneous catalysis, including reaction mechanisms and kinetics approaches.There is also a focus on the classification of metal oxides used as catalysts, preparation methods and touches on zeolites, mesoporous materials and Metal-organic frameworks (MOFs) in catalysis. It will touch on acid or base-type reactions, selective (partial) and total oxidation reactions, and enzymatic type reactions The book also touches heavily on the biomass applications of metal oxide catalysts and environmentally related/depollution reactions such as COVs elimination, DeNOx, and DeSOx. Finally, the book also deals with future trends and prospects in metal oxide-based heterogeneous catalysis. - Presents case studies in each chapter that provide a focus on the industrial applications - Includes fundamentals, key theories and practical applications of metal oxide-based heterogeneous catalysis in one comprehensive resource - Edited, and contributed, by leading experts who provide perspectives on synthesis, characterization and applications

Download or read book Chromium Oxidations in Organic Chemistry written by G. Cainelli and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chromium oxidation, well known and widely explored in organic chemistry since the very beginning of this science, is a topic of current interest for the organic chemist as evidenced by the continuous development of new techni ques and procedures reported in the literature. Chromium oxidation is a simple process which can be easily performed in the laboratory and scaled up in industry as well. Although almost every oxidizable organic functional group may undergo chromium oxidation, the most important fields of appli cation are the oxidation of alcohols, allylic and benzylic oxidation, oxidative degradation and oxidation of some organometallic compounds. A high degree of selectivity is often possible by choosing the most suitable reagent among those several ones now available. This book takes account of the various functional groups that undergo oxidation and the entire literature up to 1982. It has been written in the hope to help the synthetic organic chemist in his experimental work. For this purpose a number of tables comprising yields and references have been included; detailed descriptions of typical procedures are meant to show the experimental conditions and the scope of the reactions. We wish to thank Dr. Mario Orena for his valuable scientific and technical assistence and Prof. Bruno Camerino, who read the entire manuscript and corrected many of the errors. Bologna, February 1984 Gianfranco Cainelli Giuliana Cardillo Table of Contents I. Introduction . . . . . . . . . . .

Download or read book Basic Principles in Applied Catalysis written by Manfred Baerns and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a team of internationally recognized experts, this book addresses the most important types of catalytic reactions and catalysts as used in industrial practice. Both applied aspects and the essential scientific principles are described. The main topics can be summarized as follows: heterogeneous, homogeneous and biocatalysis, catalyst preparation and characterization, catalytic reaction engineering and kinetics, catalyst deactivation and industrial perspective.

Download or read book Nanocomposites for Pollution Control written by Chaudhery Mustansar Hussain and published by CRC Press. This book was released on 2018-04-24 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocomposites present outstanding mechanical properties and compatibility owing to their composite matrix and unique physical and chemical composition provided by large surface-area-to-volume ratios and high interfacial reactivity. Freedom to functionalize nanocomposites with various chemical groups increases their affinity toward target pollutants, which is highly desirable for the selective extraction of target analytes in complex environmental matrixes. This book presents the recent progress in the field of nanocomposites and their properties, fabrication methods, and applications for pollution control and sensing. It discusses the advances in pollution control techniques made possible because of nanocomposites and focuses on environment-friendly and efficient approaches. The text also covers economic, toxicological, and regulatory issues and research trends.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.

Download or read book Metal Nanoclusters in Catalysis and Materials Science The Issue of Size Control written by Benedetto Corain and published by Elsevier. This book was released on 2011-08-11 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Nanoclusters in Catalysis and Materials Science: The Issue of Size Control deals with the synthesis of metal nanoclusters along all known methodologies. Physical and chemical properties of metal nanoclusters relevant to their applications in chemical processing and materials science are covered thoroughly. Special attention is given to the role of metal nanoclusters size and shape in catalytic processes and catalytic applications relevant to industrial chemical processing.An excellent text for expanding the knowledge on the chemistry and physics of metal nanoclusters. Divided in two parts; Part I deals with general aspects of the matter and Part II has to be considered a useful handbook dealing with the production of metal nanoclusters, especially from their size-control point of view.* Divided into two parts for ease of reference: general and operational * Separation of synthetic aspects, physical properties and applications* Specific attention is given to the task of metal nanoclusters size-control

Download or read book TiO2 Nanoparticles written by Aiguo Wu and published by John Wiley & Sons. This book was released on 2020-06-02 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique book that summarizes the properties, toxicology, and biomedical applications of TiO2-based nanoparticles Nanotechnology is becoming increasingly important for products used in our daily lives. Nanometer-sized titanium dioxide (TiO2) are widely used in industry for different purposes, such as painting, sunscreen, printing, cosmetics, biomedicine, and so on. This book summarizes the advances of TiO2 based nanobiotechnology and nanomedicine, covering materials properties, toxicological research, and biomedical application, such as antibacter, biosensing, and cancer theranostics. It uniquely integrates the TiO2 applications from physical properties, toxicology to various biomedical applications, and includes black TiO2 based cancer theranostics. Beginning with a comprehensive introduction to the properties and applications of nanoparticles, TiO2 Nanoparticles: Applications in Nanobiotechnology, Theranostics and Nanomedicine offers chapters on: Toxicity of TiO2 Nanoparticles; Antibacterial Applications of TiO2 Nanoparticles; Surface Enhanced Raman Spectrum of TiO2 Nanoparticle for Biosensing (TiO2 Nanoparticle Served as SERS Sensing Substrate); TiO2 as Inorganic Photosensitizer for Photodynamic Therapy; Cancer Theranostics of Black TiO2 Nanoparticles; and Neurodegenerative Disease Diagnostics and Therapy of TiO2-Based Nanoparticles. This title: Blends the physical properties, toxicology of TiO2 nanoparticles to the many biomedical applications Includes black TiO2 based cancer theranostics in its coverage Appeals to a broad audience of researchers in academia and industry working on nanomaterials-based biosensing, drug delivery, nanomedicine TiO2 Nanoparticles: Applications in Nanobiotechnology, Theranostics and Nanomedicine is an ideal book for medicinal chemists, analytical chemists, biochemists, materials scientists, toxicologists, and those in the pharmaceutical industry.