Download or read book Application of Artificial Intelligence Technology to Increase Productivity Quality and Energy Efficiency in Heavy Industry written by Adam J. Szladow and published by . This book was released on 1995 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Exergy Energy System Analysis and Optimization Volume III written by Christos A. Frangopoulos and published by EOLSS Publications. This book was released on 2009-05-13 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exergy, Energy System Analysis, and Optimization theme is a component of the Encyclopedia of Energy Sciences, Engineering and Technology Resources which is part of the global Encyclopedia of Life Support Systems (EOLSS), an integrated compendium of twenty one Encyclopedias. These three volumes are organized into five different topics which represent the main scientific areas of the theme: 1. Exergy and Thermodynamic Analysis; 2. Thermoeconomic Analysis; 3. Modeling, Simulation and Optimization in Energy Systems; 4. Artificial Intelligence and Expert Systems in Energy Systems Analysis; 5. Sustainability Considerations in the Modeling of Energy Systems. Fundamentals and applications of characteristic methods are presented in these volumes. These three volumes are aimed at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.
Download or read book System Dependability Theory and Applications written by Wojciech Zamojski and published by Springer Nature. This book was released on with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Finance Economics and Industry for Sustainable Development written by Anna Rumyantseva and published by Springer Nature. This book was released on with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Artificial Intelligence for Robotics and Autonomous Systems Applications written by Ahmad Taher Azar and published by Springer Nature. This book was released on 2023-05-15 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses many applications of artificial intelligence in robotics, namely AI using visual and motional input. Robotic technology has made significant contributions to daily living, industrial uses, and medicinal applications. Machine learning, in particular, is critical for intelligent robots or unmanned/autonomous systems such as UAVs, UGVs, UUVs, cooperative robots, and so on. Humans are distinguished from animals by capacities such as receiving visual information, adjusting to uncertain circumstances, and making decisions to take action in a complex system. Significant progress has been made in robotics toward human-like intelligence; yet, there are still numerous unresolved issues. Deep learning, reinforcement learning, real-time learning, swarm intelligence, and other developing approaches such as tiny-ML have been developed in recent decades and used in robotics. Artificial intelligence is being integrated into robots in order to develop advanced robotics capable of performing multiple tasks and learning new things with a better perception of the environment, allowing robots to perform critical tasks with human-like vision to detect or recognize various objects. Intelligent robots have been successfully constructed using machine learning and deep learning AI technology. Robotics performance is improving as higher quality, and more precise machine learning processes are used to train computer vision models to recognize different things and carry out operations correctly with the desired outcome. We believe that the increasing demands and challenges offered by real-world robotic applications encourage academic research in both artificial intelligence and robotics. The goal of this book is to bring together scientists, specialists, and engineers from around the world to present and share their most recent research findings and new ideas on artificial intelligence in robotics.
Download or read book Sustainable Engineering written by Yasar Demirel and published by CRC Press. This book was released on 2023-08-04 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable engineering is of great importance for resilient and agile technology and society. This book balances economics, environment, and societal elements of sustainable engineering by integrating process intensification, energy analysis, and artificial intelligence to reduce production costs, improve the use of material and energy, product quality, safety, societal well-being, and water usage. The book provides comprehensive discussion of topics on process intensification, energy analysis, and artificial intelligence that include optimization, energy integration, green engineering, pinch analysis, exergy analysis, feasibility analysis, life cycle assessment, circular economy, bioeconomy, data processing, machine learning, expert systems, digital twins, and self-optimized plants for sustainable engineering.
Download or read book Report to Parliament Under the Energy Efficiency Act written by Canada. Natural Resources Canada and published by . This book was released on 1997 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Using Real Time Data and AI for Thrust Manufacturing written by Satishkumar, D. and published by IGI Global. This book was released on 2024-03-28 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the dynamic world of manufacturing, the industry has grappled with ongoing issues such as expensive machine maintenance, operational inefficiencies, and the production of defective products. The need for informed decision-making to maintain quality, meet deadlines, and prevent disruptions is more crucial than ever. Enter Using Real-Time Data and AI for Thrust Manufacturing, a groundbreaking book that addresses these challenges head-on. As Industry 4.0 transforms the manufacturing sector through the integration of the Internet of Things (IoT) and artificial intelligence (AI), this book serves as a beacon for academic scholars and industry professionals alike, offering profound insights into the world of AI-driven industry solutions. The objective of this book is clearto revolutionize the manufacturing sector by leveraging human expertise and AI-driven data technologies. By delving into the realms of Industry 4.0, IoT, and AI, the book systematically tackles issues such as costly downtime, inefficient processes, and the production of substandard products. With a focus on turning raw data into meaningful insights, the book explores AI applications like machine learning and deep learning, natural language processing, and machine vision. From predictive maintenance to improved demand forecasting, quality assurance, inspection, and warehouse automation, the book positions AI as the linchpin of "Industry 4.0," ensuring not only cost savings but also safety improvements and supply-chain efficiencies.
Download or read book Robotized technologies for enhanced shipyard operations challenges and solutions written by Jawad Masood and published by OAE Publishing Inc.. This book was released on 2024-03-25 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: Large component manufacturing relies heavily on manual operations and human workers. Human-centric solutions can preserve industry-specific knowledge, extend capabilities, and improve job performance. Three robotized technologies were developed for shipyard operations: ABB™ and KUKA™ robot hand-guiding systems (HGS), a lightweight collaborative system for plasma cutting, and a cost-effective 3D projection system for retrofitting. These technologies were developed at the open didactic factory, which served as platforms for rapid technological advancement. The HGS was integrated with ABB™ and KUKA™, and the 3D projection technology and lightweight collaborative system offered a cost-effective solution for small and medium shipyards. However, transitioning to non-flat surfaces presents challenges due to geometric variations and discrepancies between the computer-aided design model and the actual component.
Download or read book Artificial Intelligence in Healthcare written by Adam Bohr and published by Academic Press. This book was released on 2020-06-21 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial Intelligence (AI) in Healthcare is more than a comprehensive introduction to artificial intelligence as a tool in the generation and analysis of healthcare data. The book is split into two sections where the first section describes the current healthcare challenges and the rise of AI in this arena. The ten following chapters are written by specialists in each area, covering the whole healthcare ecosystem. First, the AI applications in drug design and drug development are presented followed by its applications in the field of cancer diagnostics, treatment and medical imaging. Subsequently, the application of AI in medical devices and surgery are covered as well as remote patient monitoring. Finally, the book dives into the topics of security, privacy, information sharing, health insurances and legal aspects of AI in healthcare. Highlights different data techniques in healthcare data analysis, including machine learning and data mining Illustrates different applications and challenges across the design, implementation and management of intelligent systems and healthcare data networks Includes applications and case studies across all areas of AI in healthcare data
Download or read book Impact and Opportunities of Artificial Intelligence Techniques in the Steel Industry written by Valentina Colla and published by Springer Nature. This book was released on 2021-02-04 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects perceptions and needs expectations and experiences concerning the application of Artificial Intelligence (AI) and Machine Learning in the steel sector. It contains a selection of themes discussed within the Workshop entitled “Impact and Opportunities of Artificial Intelligence in the Steel Industry” organized by the European Steel Technology Platform as an online event from October 15 until November 5, 2020. The event aimed at analyzing the diffusion of AI technologies in steelworks and at providing indications for future research, development and innovation actions addressing the sector demands. The chapters treat general analyses on transversal themes and applications for process optimization, product quality enhancement, yield increase, optimal exploitation of resources and smart data handling. The book is devoted to researchers and technicians in the steel or AI fields as well as for managers and policymakers exploring the opportunities provided by AI in industry.
Download or read book Artificial Intelligence Raises Efficiency In Manufacturing Industry written by Johnny Ch Lok and published by . This book was released on 2019-12-11 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technological progress is main driver of growth of GDP per capita, allowing output to increase faster than labor and capital . However, technology can increase productivity, but also decrease the number of labor hours needed to create a unit of output. So (AI) causes unequal to labor wage decreases, even reduces the number of labor to manufacture, e.g. artificial intelligence technology of automation car manufacturing industry; clothing manufacturing industry; plane manufacturing etc. high technology of artificial intelligence manufacturing method. But (AI) should be potential environment benefit, although it raises unemployment ratio. Moreover, it can rise production, due to many skilled craft were replaced by the combination of machines and lower-skilled labor. The result of (AI) technology introduction, it causes output per hour risen when inequality declined, driving up average living standards, but the labor of some high-skill workers was no longer as valuable in the market. Otherwise, if (AI) technology is continue developed to be success. Some routine intensive occupations will be loss, which focused on predictable, e.g. easily programmable tasks, such as switchboard operators, filing clerks, travel agents, and assembly line workers would be particularly replaced by new (AI) technology. However, at the same time, (AI) technology development will bring these benefits: improvement in education ( training (AI) technology scientists), due to (AI) manufacturing technology needs are raising to businesses and institutional changes, such as the reduction in unionization and raising in the minimum wage to the (AI) manufacturing technology skilled labor in factories.Because (AI) technology is not a single technology, but rather a collection of technologies that are applied to specific tasks, the effects of (AI) will be felt unevenly though the economy. It will bring some tasks will be most easily automated than others, and some jobs will be affected more than others, both negatively and positively. Finally, new jobs are likely to be directly created in areas, such as the development and supervision of (AI) as well as indirectly created in a range areas though out the economy as higher incomes lead to expanded demand.However, if (AI) technology could dominate global labor markets. If labor productivity increases, do not influence to wage increases, then the large economic gains brought about by (AI) technology could be increased wealth inequality, due to employers can reduce production cost, but workers ( labors) wages will not be increased, even will be decreased. Hence, it seems the (AI) technology will bring disadvantages to labor market to cause unemployment or reduce wages in possible, although it can reduce employer individual salary (wage) expenditure and it can raise productivity.⦁How can artificial intelligence impact global economy growth?Artificial intelligence (AI) technology is a branch of computer science that aims to create intelligent machines that work and react like humans. So, (AI) is a technology that appears to impact ( influence) human preference by learning, understanding complex contents, enhancing humans in executing both routine and non-routine tasks. In the future, (AI) technology that can be virtual personal assistant, as well as it may exist, such as robots with human-like processing capabilities
Download or read book MSIEID 2022 written by Haocun Wu and published by European Alliance for Innovation. This book was released on 2023-03-14 with total page 1596 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Management Science Informatization and Economic Innovation Development Conference is a leading conference held annually. It aims at building an academic platform for the communication and academic exchange among participants from various fields related to management science informatization and economic innovation development. Here, scholars, experts, and researchers are welcomed to share their research progress and inspirations. It is a great opportunity to promote academic communication and collaboration worldwide. This volume contains the papers presented at the 4th Management Science Informatization and Economic Innovation Development Conference (MSIEID 2022), held during December 9th-11th, 2022 in Chongqing, China (virtual event). For the safety concern of all participants under nowadays situation, we decided to hold it as a virtual conference which is also effective and convenient for academic exchange and communication. Everyone interested in these fields were welcomed to join the online conference and to give comments and raise questions to the speeches and presentations.
Download or read book New Trends in the Use of Artificial Intelligence for the Industry 4 0 written by Luis Romeral Martinez and published by BoD – Books on Demand. This book was released on 2020-03-25 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industry 4.0 is based on the cyber-physical transformation of processes, systems and methods applied in the manufacturing sector, and on its autonomous and decentralized operation. Industry 4.0 reflects that the industrial world is at the beginning of the so-called Fourth Industrial Revolution, characterized by a massive interconnection of assets and the integration of human operators with the manufacturing environment. In this regard, data analytics and, specifically, the artificial intelligence is the vehicular technology towards the next generation of smart factories.Chapters in this book cover a diversity of current and new developments in the use of artificial intelligence on the industrial sector seen from the fourth industrial revolution point of view, namely, cyber-physical applications, artificial intelligence technologies and tools, Industrial Internet of Things and data analytics. This book contains high-quality chapters containing original research results and literature review of exceptional merit. Thus, it is in the aim of the book to contribute to the literature of the topic in this regard and let the readers know current and new trends in the use of artificial intelligence for the Industry 4.0.
Download or read book Artificial Intelligence for Digitising Industry Applications written by Ovidiu Vermesan and published by CRC Press. This book was released on 2022-09-01 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides in-depth insights into use cases implementing artificial intelligence (AI) applications at the edge. It covers new ideas, concepts, research, and innovation to enable the development and deployment of AI, the industrial internet of things (IIoT), edge computing, and digital twin technologies in industrial environments. The work is based on the research results and activities of the AI4DI project, including an overview of industrial use cases, research, technological innovation, validation, and deployment. This book’s sections build on the research, development, and innovative ideas elaborated for applications in five industries: automotive, semiconductor, industrial machinery, food and beverage, and transportation. The articles included under each of these five industrial sectors discuss AI-based methods, techniques, models, algorithms, and supporting technologies, such as IIoT, edge computing, digital twins, collaborative robots, silicon-born AI circuit concepts, neuromorphic architectures, and augmented intelligence, that are anticipating the development of Industry 5.0. Automotive applications cover use cases addressing AI-based solutions for inbound logistics and assembly process optimisation, autonomous reconfigurable battery systems, virtual AI training platforms for robot learning, autonomous mobile robotic agents, and predictive maintenance for machines on the level of a digital twin. AI-based technologies and applications in the semiconductor manufacturing industry address use cases related to AI-based failure modes and effects analysis assistants, neural networks for predicting critical 3D dimensions in MEMS inertial sensors, machine vision systems developed in the wafer inspection production line, semiconductor wafer fault classifications, automatic inspection of scanning electron microscope cross-section images for technology verification, anomaly detection on wire bond process trace data, and optical inspection. The use cases presented for machinery and industrial equipment industry applications cover topics related to wood machinery, with the perception of the surrounding environment and intelligent robot applications. AI, IIoT, and robotics solutions are highlighted for the food and beverage industry, presenting use cases addressing novel AI-based environmental monitoring; autonomous environment-aware, quality control systems for Champagne production; and production process optimisation and predictive maintenance for soybeans manufacturing. For the transportation sector, the use cases presented cover the mobility-as-a-service development of AI-based fleet management for supporting multimodal transport. This book highlights the significant technological challenges that AI application developments in industrial sectors are facing, presenting several research challenges and open issues that should guide future development for evolution towards an environment-friendly Industry 5.0. The challenges presented for AI-based applications in industrial environments include issues related to complexity, multidisciplinary and heterogeneity, convergence of AI with other technologies, energy consumption and efficiency, knowledge acquisition, reasoning with limited data, fusion of heterogeneous data, availability of reliable data sets, verification, validation, and testing for decision-making processes.
Download or read book The Italian Utilities Industry written by Andrea Gilardoni and published by Springer Nature. This book was released on 2020-01-21 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the fundamental changes that the Italian public utilities sector has undergone in the last two decades. Since the late 1990s, liberalisation and privatisation have replaced state-owned monopolies at both the national and local level, new technologies have created a broad range of new opportunities for power generation and distribution, and a redesigned public policy agenda has brought to the fore a whole set of new priorities. In this fast-changing environment, firms have redrawn their strategies, redesigned their business architectures and models, invested in infrastructure and R&D, taken advantage of growth opportunities at home and abroad, opened up their ownership structure, revised their offerings, and developed a new approach to customers. As a result, a radically altered market structure has emerged. As the sector tackles the overriding challenge of sustainability and energy transition, the book takes stock of such past and ongoing developments through the direct testimonies of various stakeholders: the companies in the energy, water, and waste management sectors that are at the forefront of this sweeping transformation; regulators; financial partners; and management consulting firms. The diversity of perspectives and wealth of information presented make this book a valuable resource for anyone wanting to grasp the direction, intensity and causes of change, as well as the nature of the challenges that lie ahead. This work has been prepared as part of the research activities of the Observatory on Alliances and Strategies in the Pan-European Utility Market, one of Agici’s Research and Advisory units.
Download or read book How And Why Artificial Intelligence Raises Productive Efficiency written by Johnny Ch Lok and published by . This book was released on 2020-04-27 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: Why does (AI) and digital transformative combination technologies raise productivity growth or improve service performance? From 1995 to 2004 year, US experienced an acceleration in productivity growth, largely reflecting gains associated with the diffusion of ICT technologies. From the early to mid-2000 year onward, productivity growth has slowed down. The potential impacts of the ongoing digital transformation on productivity also need to consider in the context of this long term slowdown. When, the precise reasons for today's productivity remain difficult to a number of factors are likely to contribute as below factors: The first factor that has limited the impacts of digital transformation is the state of diffusion of digital technologies across the economy. When, many firms now have across to broadband networks, the use of more advanced digital tools and application with firms still differs greatly across countries. Moreover, these are important differences between rapid technological change, advanced technologies are initially only adopted by some leading firms and then only later diffuse to all firms as the technologies because more established new business models grow, such as applying digital and (AI) technological combine method to raise productivity growth is caused and costs fall. Consequently, these is large demand between what can be automated from a technical point of view and what may already be implemented by frontier firms and what is actually being achieve to raise productivity growth aim. So, (AI) and digital transformative technology influence future raising productivity growth or improving service aim achievement for many manufacturing and service industry demand.The second factor indicator that the available evidence suggests that the wide-spread benefits of digitalization productivity are not enough. Firms expect to help strengthen investment ( in tangible and intangible assets), e.g. (AI) technology. The same time, there are now starting to experience labor shortages, e.g. in certain technical occupations, such as data scientists. Due to the technological change is fast and growing demand for productivity growth has been increasing. SO, it will influence future (AI) robotic learning system and digital technological combination to be applied to manufacturing and service industries' needs to be raised. Due to many firms expect to find methods to raise productivity growth in order to reduce production costs.However, (AI) and digital technological development can cause multiple forms of disruption, from shifts in demand for workforce skills to changes in market structure, the need for new business models, new patterns of trade and investment. The (AI) and digital potentially transformative technologies can create new inventions, e.g. from quantum computing and advanced energy storage to new forms of 3D printing, big data analytics and neuro-technologies. These new product creative industries must lead the new product manufacturers to expect to learn how to apply (AI) and digital technology to raise productivity growth when their manufacturing processes. IN fact, (AI) is the ability of learning machine and system to acquire and apply knowledge and carry out intelligent behavior. Early efforts to develop (AI) centered on defining rules that software could use to perform a tack, such systems would work in speech recognition, (AI) skill. Increase in computational power, new statistical methods and advances in big data, have brought major breakthroughs to the field of (AI), especially in " vertical " (AI) like automated vehicles as opposed to " general". (AI) with machine learning algorithms that identify complex patterns in large data sets. Software applications can perform tasks and simultaneously learn how to improve productive performance.
