Download or read book Application of a Channel Design Method to High solidity Cascades and Tests of an Impulse Cascade with 90 of Turning written by John D. Stanitz and published by . This book was released on 1952 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: A technique is developed for the application of a channel design method to the design of high-solidity cascades with prescribed velocity distributions as a function of arc length along the blade-element profile. The technique applies to both incompressible and subsonic linearized compressible (ratio of specific heats equal to -1.0), nonviscous, irrotational, fluid motion. An impulse cascade with 90 degree turning was designed for incompressible flow and was tested at the design angle of attack over a range of downstream Mach number from 0.2 to choke flow. To achieve good efficiency, the cascade was designed for prescribed velocities with maximum allowable blade loading according to limitations imposed by considerations of boundary-layer separation.
Download or read book Application of a Channel Design Method to High solidity Cascades and Tests of an Impulse Cascade with 90 Degrees of Turning written by and published by . This book was released on 1952 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Application of a Channel Design Method to High solidity Cascades and Tests of an Impulse Cascade with 90 O of Turning written by John D. Stanitz and published by . This book was released on 1953 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Application of a channel design method to high soidity cascades and tests of an impulse cascade with 90 of turning written by John D. Stanitz and published by . This book was released on 1953 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Battelle Technical Review written by Battelle Memorial Institute and published by . This book was released on 1952 with total page 1096 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas Turbine and Free Piston Engine Lectures June 13 June 17 1955 Department of Mechanical and Industrial Engineering University of Michigan written by Frank L. Schwartz and published by . This book was released on 1955 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas Turbine Lectures June 29 July 10 1953 written by University of Michigan. College of Engineering. Dept. of Mechanical and Industrial Engineering and published by . This book was released on 1953 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas Turbine and Free Piston Engine Lectures July 7 July 11 1958 written by Frank L Schwartz and published by . This book was released on 1958 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ASME Technical Papers written by and published by . This book was released on with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fluid Mechanics Thermodynamics of Turbomachinery written by Sydney Lawrence Dixon and published by Pergamon. This book was released on 1978 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised and updated, this well established and highly successful book gives a competent account of the fundamental theory of turbomachines. A concise and unified approach to the subject is employed which fills the need for a comprehensive introductory text suitable for most engineering curricula. The theoretical approach, based firmly on the fundamental principles of thermodynamics and fluid mechanics, makes the book particularly suitable for undergraduate courses. It has also proved very useful to professional engineers who require a relevant text on the basic physical processes in turbomachines and their theoretical representation. Several modifications have been incorporated in the text in the light of recent advances in the subject. Further information on cavitation has been included and a new section on the optimum design of a pump inlet taking account of cavitation limitations has been added. Certain chapters have been extended: the section on 'Constant specific mass flow' design now includes the flow equations for a following rotor row, and the section on the definition of blade shapes has been extended to include the parabolic arc camber line blade. A list of symbols used in the text has been added. Each chapter contains a selection of useful problems and answers are provided at the end of the book. SI/Metric units are used throughout
Download or read book Aeroacoustics of Flight Vehicles written by Harvey H. Hubbard and published by . This book was released on 1991 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas Turbine Engineering Handbook written by Meherwan P. Boyce and published by Elsevier. This book was released on 2017-09-01 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Gas Turbine Engineering Handbook has been the standard for engineers involved in the design, selection, and operation of gas turbines. This revision includes new case histories, the latest techniques, and new designs to comply with recently passed legislation. By keeping the book up to date with new, emerging topics, Boyce ensures that this book will remain the standard and most widely used book in this field. The new Third Edition of the Gas Turbine Engineering Hand Book updates the book to cover the new generation of Advanced gas Turbines. It examines the benefit and some of the major problems that have been encountered by these new turbines. The book keeps abreast of the environmental changes and the industries answer to these new regulations. A new chapter on case histories has been added to enable the engineer in the field to keep abreast of problems that are being encountered and the solutions that have resulted in solving them. Comprehensive treatment of Gas Turbines from Design to Operation and Maintenance. In depth treatment of Compressors with emphasis on surge, rotating stall, and choke; Combustors with emphasis on Dry Low NOx Combustors; and Turbines with emphasis on Metallurgy and new cooling schemes. An excellent introductory book for the student and field engineers A special maintenance section dealing with the advanced gas turbines, and special diagnostic charts have been provided that will enable the reader to troubleshoot problems he encounters in the field The third edition consists of many Case Histories of Gas Turbine problems. This should enable the field engineer to avoid some of these same generic problems
Download or read book Computer Vision Metrics written by Scott Krig and published by Apress. This book was released on 2014-06-14 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Vision Metrics provides an extensive survey and analysis of over 100 current and historical feature description and machine vision methods, with a detailed taxonomy for local, regional and global features. This book provides necessary background to develop intuition about why interest point detectors and feature descriptors actually work, how they are designed, with observations about tuning the methods for achieving robustness and invariance targets for specific applications. The survey is broader than it is deep, with over 540 references provided to dig deeper. The taxonomy includes search methods, spectra components, descriptor representation, shape, distance functions, accuracy, efficiency, robustness and invariance attributes, and more. Rather than providing ‘how-to’ source code examples and shortcuts, this book provides a counterpoint discussion to the many fine opencv community source code resources available for hands-on practitioners.
Download or read book Out Of Control written by Kevin Kelly and published by Basic Books. This book was released on 2009-04-30 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Out of Control chronicles the dawn of a new era in which the machines and systems that drive our economy are so complex and autonomous as to be indistinguishable from living things.
Download or read book Inverse Problems in Engineering Mechanics written by Masataka Tanaka and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inverse problems occur in a wide variey of fields. In general, the inverse problem can be defined as one where one should estimate the cause from the result, while the direct problem is concerned with how to obtain the result from the cause. The aim of this symposium was to gather scientists and researchers in engineering mechanics concerned with inverse problems in order to exchange research result and develop computational and experimentalapproaches to solve inverse problems. The contributions in this volume cover the following subjects: mathematical and computational aspects of inverse problems, parameter or system identification, shape determination, sensitivity analysis, optimization, material property characterization, ultrasonic nondestructive testing, elastodynamic inverse problems, thermal inverse problems, and other miscellaneous engineering applications.
Download or read book Modelling Fluid Flow written by János Vad and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling Fluid Flow presents invited lectures, workshop summaries and a selection of papers from a recent international conference CMFF '03 on fluid technology. The lectures follow the current evolution and the newest challenges of the computational methods and measuring techniques related to fluid flow. The workshop summaries reflect the recent trends, open questions and unsolved problems in the mutually inspiring fields of experimental and computational fluid mechanics. The papers cover a wide range of fluids engineering, including reactive flow, chemical and process engineering, environmental fluid dynamics, turbulence modelling, numerical methods, and fluid machinery.
Download or read book Gas Turbine Design Components and System Design Integration written by Meinhard T. Schobeiri and published by Springer. This book was released on 2017-06-06 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book written by a world-renowned expert with more than forty years of active gas turbine R&D experience comprehensively treats the design of gas turbine components and their integration into a complete system. Unlike many currently available gas turbine handbooks that provide the reader with an overview without in-depth treatment of the subject, the current book is concentrated on a detailed aero-thermodynamics, design and off-deign performance aspects of individual components as well as the system integration and its dynamic operation.This new book provides practicing gas turbine designers and young engineers working in the industry with design material that the manufacturers would keep proprietary. The book is also intended to provide instructors of turbomachinery courses around the world with a powerful tool to assign gas turbine components as project and individual modules that are integrated into a complete system. Quoting many statements by the gas turbine industry professionals, the young engineers graduated from the turbomachinery courses offered by the author, had the competency of engineers equivalent to three to four years of industrial experience.
