Download or read book Offshore Structures written by Mohamed A. El-Reedy and published by Gulf Professional Publishing. This book was released on 2019-11-06 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offshore Structures: Design, Construction and Maintenance, Second Edition covers all types of offshore structures and platforms employed worldwide. As the ultimate reference for selecting, operating and maintaining offshore structures, this book provides a roadmap for designing structures which will stand up even in the harshest environments. Subsea pipeline design and installation is also covered in this edition, as is the selection of the proper type of offshore structure, the design procedure for the fixed offshore structure, nonlinear analysis (Push over) as a new technique to design and assess the existing structure, and more. With this book in hand, engineers will have the most up-to-date methods for performing a structural lifecycle analysis, implementing maintenance plans for topsides and jackets and using non-destructive testing. - Provides a one-stop guide to offshore structure design and analysis - Presents easy-to-understand methods for structural lifecycle analysis - Contains expert advice for designing offshore platforms for all types of environments

Download or read book Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering written by The Organizing Committee of the 16th ICSMGE and published by IOS Press. This book was released on 2005-09-12 with total page 3742 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 16th ICSMGE responds to the needs of the engineering and construction community, promoting dialog and exchange between academia and practice in various aspects of soil mechanics and geotechnical engineering. This is reflected in the central theme of the conference 'Geotechnology in Harmony with the Global Environment'. The proceedings of the conference are of great interest for geo-engineers and researchers in soil mechanics and geotechnical engineering. Volume 1 contains 5 plenary session lectures, the Terzaghi Oration, Heritage Lecture, and 3 papers presented in the major project session. Volumes 2, 3, and 4 contain papers with the following topics: Soil mechanics in general; Infrastructure and mobility; Environmental issues of geotechnical engineering; Enhancing natural disaster reduction systems; Professional practice and education. Volume 5 contains the report of practitioner/academic forum, 20 general reports, a summary of the sessions and workshops held during the conference.

Download or read book Proceedings Offshore Technology Conference written by and published by . This book was released on 2000 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Future Energy Conferences and Symposia written by and published by . This book was released on 1994 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Petroleum and Marine Technology Information Guide written by J. Hutcheon and published by CRC Press. This book was released on 2003-09-02 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1981 as the Offshore Information Guide this guide to information sources has been hailed internationally as an indispensable handbook for the oil, gas and marine industries.

Download or read book Frontiers in Offshore Geotechnics written by Susan Gourvenec and published by CRC Press. This book was released on 2005-10-13 with total page 1130 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses current and emerging challenges facing those working in offshore construction, design and research. Keynote papers from leading industry practitioners and academics provide a comprehensive overview of central topics covering deepwater anchoring, pipelines, foundation solutions for offshore wind turbines, site investigation, geoh

Download or read book Trends in Oil and Gas Corrosion Research and Technologies written by A. M. El-Sherik and published by Woodhead Publishing. This book was released on 2017-06-09 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Trends in Oil and Gas Corrosion Research and Technologies: Production and Transmission delivers the most up-to-date and highly multidisciplinary reference available to identify emerging developments, fundamental mechanisms and the technologies necessary in one unified source. Starting with a brief explanation on corrosion management that also addresses today's most challenging issues for oil and gas production and transmission operations, the book dives into the latest advances in microbiology-influenced corrosion and other corrosion threats, such as stress corrosion cracking and hydrogen damage just to name a few. In addition, it covers testing and monitoring techniques, such as molecular microbiology and online monitoring for surface and subsurface facilities, mitigation tools, including coatings, nano-packaged biocides, modeling and prediction, cathodic protection and new steels and non-metallics. Rounding out with an extensive glossary and list of abbreviations, the book equips upstream and midstream corrosion professionals in the oil and gas industry with the most advanced collection of topics and solutions to responsibly help solve today's oil and gas corrosion challenges. - Covers the latest in corrosion mitigation techniques, such as corrosion inhibitors, biocides, non-metallics, coatings, and modeling and prediction - Solves knowledge gaps with the most current technology and discoveries on specific corrosion mechanisms, highlighting where future research and industry efforts should be concentrated - Achieves practical and balanced understanding with a full spectrum of subjects presented from multiple academic and world-renowned contributors in the industry

Download or read book Applied Science Technology Index written by and published by . This book was released on 1996 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Geomechanics of Marine Anchors written by Charles Aubeny and published by CRC Press. This book was released on 2017-09-18 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive guide for the analysis and design of anchor systems used for mooring offshore floating structures. Much of the experience is based on applications toward the offshore oil and gas industry, but the substantial potential for offshore renewable energy systems is addressed. The major types of anchors are described with respect to their basic design concept, advantages and limitations, appropriate framework for analysis, and observed performance. This book addresses all aspects of anchor behaviour related to anchor design including the installation performance, load capacity, deformation, and structural integrity of the anchor itself. Coverage is also provided of appurtenant components of anchor systems, in particular of anchor line/chain mechanics in the soil and water columns. Much of the material presented represents relatively new developments, including several new anchors which have been developed within the last decade, so the book will provide a useful compendium of information is largely scattered in journals and conference proceedings. This book is intended for engineers engaged in offshore geotechnics and marine engineers involved in mooring system and floating structure design. While the analytical methods presented in this text have a strong theoretical basis, the emphasis is on simplified computational formats accessible to design engineers.

Download or read book Oil and Gas Pipelines written by R. Winston Revie and published by John Wiley & Sons. This book was released on 2015-04-01 with total page 855 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and detailed reference guide on the integrity and safety of oil and gas pipelines, both onshore and offshore Covers a wide variety of topics, including design, pipe manufacture, pipeline welding, human factors, residual stresses, mechanical damage, fracture and corrosion, protection, inspection and monitoring, pipeline cleaning, direct assessment, repair, risk management, and abandonment Links modern and vintage practices to help integrity engineers better understand their system and apply up-to-date technology to older infrastructure Includes case histories with examples of solutions to complex problems related to pipeline integrity Includes chapters on stress-based and strain-based design, the latter being a novel type of design that has only recently been investigated by designer firms and regulators Provides information to help those who are responsible to establish procedures for ensuring pipeline integrity and safety

Download or read book Handbook of Marine Mineral Deposits written by David Spencer Cronan and published by Routledge. This book was released on 2017-10-19 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook summarizes the main advances in our understanding of marine minerals and concentrates on the deposits of proven economic potential. In cases where our knowledge may be too limited to allow defining of their economic potential, those minerals are covered regionally or by deposit type. Handbook of Marine Mineral Deposits is divided into three sections; Marine placers, manganese nodules and crusts, and deep-sea hydrothermal mineralization. All of these mineral deposits have great potential importance to economic geologists and marine mines. Edited by an acknowledged expert in the field, this handbook includes work by internationally renowned contributors. The new United Nations Law of the Sea, ratified by over 100 countries within the past two years, provides a framework and guidelines for deep-sea mineral exploration that increases international interest in this book. The Handbook serves as a platform from which to launch the more detailed evaluation studies that will need to take place in the 21st century before recovery can continue or commence. Handbook of Marine Mineral Deposits is useful to mineralogists, economic geologists, marine geologists, marine miners, and conservationists. Features

Download or read book Shreir s Corrosion written by and published by Elsevier. This book was released on 2009-02-27 with total page 3652 pages. Available in PDF, EPUB and Kindle. Book excerpt: This four-volume reference work builds upon the success of past editions of Elsevier’s Corrosion title (by Shreir, Jarman, and Burstein), covering the range of innovations and applications that have emerged in the years since its publication. Developed in partnership with experts from the Corrosion and Protection Centre at the University of Manchester, Shreir’s Corrosion meets the research and productivity needs of engineers, consultants, and researchers alike. Incorporates coverage of all aspects of the corrosion phenomenon, from the science behind corrosion of metallic and non-metallic materials in liquids and gases to the management of corrosion in specific industries and applications Features cutting-edge topics such as medical applications, metal matrix composites, and corrosion modeling Covers the benefits and limitations of techniques from scanning probes to electrochemical noise and impedance spectroscopy

Download or read book Design Aids of Offshore Structures Under Special Environmental Loads including Fire Resistance written by Srinivasan Chandrasekaran and published by Springer. This book was released on 2018-01-12 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides detailed analysis methods and design guidelines for fire resistance, a vital consideration for offshore processing and production platforms. Recent advancements in the selection of various geometric structural forms for deep-water oil exploration and production require a detailed understanding of the design of offshore structures under special loads. Focusing on a relatively new aspect of offshore engineering, the book offers essential teaching material, illustrating and explaining the concepts discussed through many tutorials. It creates a basis for designing new courses for students of ocean engineering and naval architecture, civil engineering, and applied mechanics at both undergraduate and graduate levels. As such, its content can be used for self-study or as a text in structured courses and professional development programs.

Download or read book Wave Propagation in Drilling Well Logging and Reservoir Applications written by Wilson C. Chin and published by John Wiley & Sons. This book was released on 2014-09-19 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wave propagation is central to all areas of petroleum engineering, e.g., drilling vibrations, MWD mud pulse telemetry, swab-surge, geophysical ray tracing, ocean and current interactions, electromagnetic wave and sonic applications in the borehole, but rarely treated rigorously or described in truly scientific terms, even for a single discipline. Wilson Chin, an MIT and Caltech educated scientist who has consulted internationally, provides an integrated, comprehensive, yet readable exposition covering all of the cited topics, offering insights, algorithms and validated methods never before published. A must on every petroleum engineering bookshelf! In particular, the book: Delivers drillstring vibrations models coupling axial, torsional and lateral motions that predict rate-of-penetration, bit bounce and stick-slip as they depend on rock-bit interaction and bottomhole assembly properties, Explains why catastrophic lateral vibrations at the neutral point cannot be observed from the surface even in vertical wells, but providing a proven method to avoid them, Demonstrates why Fermat's "principle of least time" (used in geophysics) applies to non-dissipative media only, but using the "kinematic wave theory" developed at MIT, derives powerful methods applicable to general attenuative inhomogeneous media, Develops new approaches to mud acoustics and applying them to MWD telemetry modeling and strong transients in modern swab-surge applicagtions, Derives new algorithms for borehole geophysics interpretation, e.g., Rh and Rv in electromagnetic wave and permeability in Stoneley waveform analysis, and Outlines many more applications, e.g., wave loadings on offshore platforms, classical problems in wave propagation, and extensions to modern kinematic wave theory. These disciplines, important to all field-oriented activities, are not treated as finite element applications that are simply gridded, "number-crunched" and displayed, but as scientific disciplines deserving of clear explanation. General results are carefully motivated, derived and applied to real-world problems, with results demonstrating the importance and predictive capabilities of the new methods.

Download or read book Deep water Sedimentation in the Alpine Basin of SE France written by Philippe Joseph and published by Geological Society of London. This book was released on 2004 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: A September 2001 meeting held in Nice, France, examined current knowledge on confined turbidite systems, in particular the Gr s d'Annot. Work from the meeting covers aspects such as structural geology, sedimentary geology and sequence stratigraphy, modeling of sedimentary processes and architectures, geochemistry, reservoir characterization, seismi

Download or read book The CERCular written by and published by . This book was released on 1993 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Production Chemicals for the Oil and Gas Industry written by Malcolm A. Kelland and published by CRC Press. This book was released on 2014-03-13 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text discusses a wide variety of production chemicals used by the oil and gas industry for down-hole and topside applications both onshore and offshore. It reviews all past and present classes of production chemicals, providing numerous difficult-to-obtain references. Unlike other texts that focus on how products perform in the field, this book focuses on the specific structures of chemicals that are known to deliver the required or desired performance. Where known, it also details the environmental aspects of the chemicals discussed and their success in the field.