Download or read book Anisotropic Mechanical Properties of 2 D Materials written by Qiang Li and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: While prior reviews and research articles focused on the various synthetic routes and microstructural controls of 2D nanomaterials as well as their functional applications, this chapter discloses the anisotropic behaviors of 2D materials and puts emphasis on the mechanical anisotropy of three distinct 2D materials, namely graphene, MoS2 and Al alloy coating, representative of carbon, inorganic and metallic 2D crystalline materials. Except for the relatively low interlayer cohesive stress, the in-plane anisotropy of the former two materials classes is subjected primarily to the hexagonal structure of the unit cells of the graphene and MoS2. The anisotropy of metallic thin films with high-density grain boundaries with preferential directionality, rendered by the non-equilibrium synthetic methods, results from both the conventional Taylor factor and the directionality of the grain boundaries. Despite 2D materials,Äô wide spectrum of applications, such as electronics, energy devices, sensors, coating etc., the mechanical anisotropy could be critical for certain mechanical applications, such as friction, and provide instructions on the durability, reliability and property optimization in the various applications of different 2D materials.
Download or read book Anisotropic 2D Materials and Devices written by Yuerui Lu and published by Royal Society of Chemistry. This book was released on 2022-09-23 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting recent progress in anisotropic 2D materials research, reader is introduced to phosphorene and its arsenic alloys, monochalcogenides of group IV elements in the form of MX (M = Ge, Sn and X = S, Se, Te), low-symmetry transition-metal dichalcogenide (TMD) materials such as rhenium disulphide (ReS2) and rhenium diselenide (ReSe2), and organic 2D materials. Providing detailed synthesis protocols and characterization techniques for these various anisotropic 2D materials, readers will learn their specific technological scopes for next generation electronics, optoelectronics and biomedical applications, challenges and future directions. Edited by an leading expert, contributors cover enhanced many-body interactions and high binding energy 1D particle dynamics to showcase design of high-performance optoelectronic devices; anisotropic polariton for designing polariton based laser systems; applications in bio-imaging, cancer diagnosis and therapies, drug delivery and release, and antibacterial performance; and finally, their potential in nano-electro-mechanical devices. Considering all these areas in detail, this book is a useful reference to the scientific communities working in related research fields, especially for materials scientists, chemists, physicists and electronics/electrical/energy engineers. This book may also be of use to those in chemical academia and industry more broadly.
Download or read book Two dimensional Materials written by Pramoda Kumar Nayak and published by BoD – Books on Demand. This book was released on 2016-08-31 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are only a few discoveries and new technologies in materials science that have the potential to dramatically alter and revolutionize our material world. Discovery of two-dimensional (2D) materials, the thinnest form of materials to ever occur in nature, is one of them. After isolation of graphene from graphite in 2004, a whole other class of atomically thin materials, dominated by surface effects and showing completely unexpected and extraordinary properties, has been created. This book provides a comprehensive view and state-of-the-art knowledge about 2D materials such as graphene, hexagonal boron nitride (h-BN), transition metal dichalcogenides (TMD) and so on. It consists of 11 chapters contributed by a team of experts in this exciting field and provides latest synthesis techniques of 2D materials, characterization and their potential applications in energy conservation, electronics, optoelectronics and biotechnology.
Download or read book Nanofabrication for Smart Nanosensor Applications written by Fernando Gomes and published by Elsevier. This book was released on 2020-06-18 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofabrication for Smart Nanosensor Applications addresses the design, manufacture and applications of a variety of nanomaterials for sensing applications. In particular, the book explores how nanofabrication techniques are used to create more efficient nanosensors, examines their major applications in biomedicine and environmental science, discusses the fundamentals of how nanosensors work, explores different nanofabrication techniques, and comments on toxicity and safety issues relating to the creation of nanosensors using certain nanomaterial classes. This book is an important resource for materials scientists and engineers who want to make materials selection decisions for the creation of new nansensor devices. - Summarizes current research and applications of a variety of nanofabrication techniques for the creation of efficient sensing devices - Provides readers with an understanding of surfaces and interfaces, a key challenge for those working on hybrid nanomaterials, carbon nanotubes, graphene, polymers and liquid crystal electro-optical imaging - Discusses the variability and sight recognition of biopolymers, such as DNA molecules, which offer a wide range of opportunities for the self-organization of nanostructures into much more complex patterns
Download or read book 2D Monoelemental Materials Xenes and Related Technologies written by Zongyu Huang and published by CRC Press. This book was released on 2022-04-19 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monoelemental 2D materials called Xenes have a graphene-like structure, intra-layer covalent bond, and weak van der Waals forces between layers. Materials composed of different groups of elements have different structures and rich properties, making Xenes materials a potential candidate for the next generation of 2D materials. 2D Monoelemental Materials (Xenes) and Related Technologies: Beyond Graphene describes the structure, properties, and applications of Xenes by classification and section. The first section covers the structure and classification of single-element 2D materials, according to the different main groups of monoelemental materials of different components and includes the properties and applications with detailed description. The second section discusses the structure, properties, and applications of advanced 2D Xenes materials, which are composed of heterogeneous structures, produced by defects, and regulated by the field. Features include: Systematically detailed single element materials according to the main groups of the constituent elements Classification of the most effective and widely studied 2D Xenes materials Expounding upon changes in properties and improvements in applications by different regulation mechanisms Discussion of the significance of 2D single-element materials where structural characteristics are closely combined with different preparation methods and the relevant theoretical properties complement each other with practical applications Aimed at researchers and advanced students in materials science and engineering, this book offers a broad view of current knowledge in the emerging and promising field of 2D monoelemental materials.
Download or read book Anisotropic 2D Materials and Devices written by Yuerui Lu and published by Royal Society of Chemistry. This book was released on 2022-09-23 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting recent progress in anisotropic 2D materials research, reader is introduced to phosphorene and its arsenic alloys, monochalcogenides of group IV elements in the form of MX (M = Ge, Sn and X = S, Se, Te), low-symmetry transition-metal dichalcogenide (TMD) materials such as rhenium disulphide (ReS2) and rhenium diselenide (ReSe2), and organic 2D materials. Providing detailed synthesis protocols and characterization techniques for these various anisotropic 2D materials, readers will learn their specific technological scopes for next generation electronics, optoelectronics and biomedical applications, challenges and future directions. Edited by an leading expert, contributors cover enhanced many-body interactions and high binding energy 1D particle dynamics to showcase design of high-performance optoelectronic devices; anisotropic polariton for designing polariton based laser systems; applications in bio-imaging, cancer diagnosis and therapies, drug delivery and release, and antibacterial performance; and finally, their potential in nano-electro-mechanical devices. Considering all these areas in detail, this book is a useful reference to the scientific communities working in related research fields, especially for materials scientists, chemists, physicists and electronics/electrical/energy engineers. This book may also be of use to those in chemical academia and industry more broadly.
Download or read book 2D Materials written by Phaedon Avouris and published by Cambridge University Press. This book was released on 2017-06-29 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn about the most recent advances in 2D materials with this comprehensive and accessible text. Providing all the necessary materials science and physics background, leading experts discuss the fundamental properties of a wide range of 2D materials, and their potential applications in electronic, optoelectronic and photonic devices. Several important classes of materials are covered, from more established ones such as graphene, hexagonal boron nitride, and transition metal dichalcogenides, to new and emerging materials such as black phosphorus, silicene, and germanene. Readers will gain an in-depth understanding of the electronic structure and optical, thermal, mechanical, vibrational, spin and plasmonic properties of each material, as well as the different techniques that can be used for their synthesis. Presenting a unified perspective on 2D materials, this is an excellent resource for graduate students, researchers and practitioners working in nanotechnology, nanoelectronics, nanophotonics, condensed matter physics, and chemistry.
Download or read book Ultrafast Photonics written by A. Miller and published by CRC Press. This book was released on 2019-08-22 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrafast photonics has become an interdisciplinary topic of high international research interest because of the spectacular development of compact and efficient lasers producing optical pulses with durations in the femtosecond time domain. Present day long-haul telecommunications systems are almost entirely based on the transmission of short burst
Download or read book 2D Materials written by Phaedon Avouris and published by Cambridge University Press. This book was released on 2017-06-29 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and accessible introduction to 2D materials, covering basic physics, electronic and optical properties, and potential applications.
Download or read book Introduction to Graphene Based Nanomaterials written by Luis E. F. Foa Torres and published by Cambridge University Press. This book was released on 2014-01-23 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: A detailed primer describing the most effective theoretical and computational methods and tools for simulating graphene-based systems.
Download or read book Fundamentals and Sensing Applications of 2D Materials written by Chandra Sekhar Rout and published by Woodhead Publishing. This book was released on 2019-06-15 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals and Sensing Applications of 2D Materials provides a comprehensive understanding of a wide range of 2D materials. Examples of fundamental topics include: defect and vacancy engineering, doping and advantages of 2D materials for sensing, 2D materials and composites for sensing, and 2D materials in biosystems. A wide range of applications are addressed, such as gas sensors based on 2D materials, electrochemical glucose sensors, biosensors (enzymatic and non-enzymatic), and printed, stretchable, wearable and flexible biosensors. Due to their sub-nanometer thickness, 2D materials have a high packing density, thus making them suitable for the fabrication of thin film based sensor devices. Benefiting from their unique physical and chemical properties (e.g. strong mechanical strength, high surface area, unparalleled thermal conductivity, remarkable biocompatibility and ease of functionalization), 2D layered nanomaterials have shown great potential in designing high performance sensor devices. - Provides a comprehensive overview of 2D materials systems that are relevant to sensing, including transition metal dichalcogenides, metal oxides, graphene and other 2D materials system - Includes information on potential applications, such as flexible sensors, biosensors, optical sensors, electrochemical sensors, and more - Discusses graphene in terms of the lessons learned from this material for sensing applications and how these lessons can be applied to other 2D materials
Download or read book 2D Materials for Nanophotonics written by Young Min Jhon and published by Elsevier. This book was released on 2020-11-29 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2D Materials for Nanophotonics presents a detailed overview of the applications of 2D materials for nanophotonics, covering the photonic properties of a range of 2D materials including graphene, 2D phosphorene and MXenes, and discussing applications in lighting and energy storage. This comprehensive reference is ideal for readers seeking a detailed and critical analysis of how 2D materials are being used for a range of photonic and optical applications. - Outlines the major photonic properties in a variety of 2D materials - Demonstrates major applications in lighting and energy storage - Explores the challenges of using 2D materials in photonics
Download or read book 2D Nanomaterials for Energy Applications written by Spyridon Zafeiratos and published by Elsevier. This book was released on 2019-11-22 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2D Nanomaterials for Energy Applications: Graphene and Beyond discusses the current state-of-the art of 2D nanomaterials used in energy-related applications. Sections cover nanogenerators, hydrogen storage and theoretical design. Each chapter focuses on a different energy application, thus allowing readers to gain a greater understanding of the most promising 2D materials in the field. The book's ultimate goal lies in describing how each energy technology is beneficial, hence it provides a valuable reference source for materials scientists and engineers. The physical and chemical properties of 2D materials can be effectively tuned through different strategies, such as controlling dimensions, the crystallographic structure and defects, or doping with heteroatoms. This flexibility facilitates the design of 2D materials for dedicated applications in the field of energy conversion and storage. - Offers a single source for the major practical applications of 2D materials in the field of energy conversion and storage - Explores how 2D materials are being used to create new, more efficient industrial energy products and devices - Compares a variety of 2D materials, showing how the properties of a range of these materials make them beneficial for specific energy applications
Download or read book Advanced Two Dimensional Material Based Heterostructures in Sustainable Energy Storage Devices written by Srikanth Ponnada and published by CRC Press. This book was released on 2024-08-30 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Two-Dimensional Material-Based Heterostructures in Sustainable Energy Storage Devices provides a detailed overview of advances and challenges in the development of 2D materials for use in energy storage devices. It offers deep insight into the synthesis, characterization, and application of different 2D materials and their heterostructures in a variety of energy storage devices, focusing on new phenomena and enhanced electrochemistry. This book: Introduces 2D materials, synthesis methods, and characterization techniques Discusses application in a wide range of batteries and supercapacitors Offers perspectives on future investigations necessary to overcome existing challenges This comprehensive reference is written to guide researchers and engineers working to advance the technology of energy-efficient energy storage devices.
Download or read book Emerging Two Dimensional Materials and Applications written by Arun Kumar Singh and published by CRC Press. This book was released on 2022-11-21 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details 2D nanomaterials, and their important applications—including recent developments and related scalable technologies crucial to addressing strong societal demands of energy, environmental protection, and worldwide health concerns—are systematically documented. It covers syntheses and structures of various 2D materials, electrical transport in graphene, and different properties in detail. Applications in important areas of energy harvesting, energy storage, environmental monitoring, and biosensing and health care are elaborated. Features: Facilitates good understanding of concepts of emerging 2D materials and its applications. Covers details of highly sensitive sensors using 2D materials for environmental monitoring. Outlines the role of 2D materials in improvement of energy harvesting and storage. Details application in biosensing and health care for the realization of next-generation biotechnologies for personalized health monitoring and so forth. Provides exclusive coverage of inorganic 2D MXenes compounds. This book is aimed at graduate students and researchers in materials science and engineering, nanoscience and nanotechnology, and electrical engineering.
Download or read book The Development of a 2D Ultrasonic Array Inspection for Single Crystal Turbine Blades written by Christopher Lane and published by Springer Science & Business Media. This book was released on 2013-10-30 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis describes the development of a new technique to solve an important industrial inspection requirement for a high-value jet-engine component. The work – and the story told in the thesis – stretches all the way from the fundamentals of wave propagation in anisotropic material and ultrasonic array imaging through to device production and site trials. The book includes a description of a new method to determine crystallographic orientation from 2D ultrasonic array data. Another new method is described that enables volumetric images of an anisotropic material to be generated from 2D ultrasonic array data, based on measured crystallographic orientation. After extensive modeling, a suitable 2D array and deployment fixtures were manufactured and tested on in situ turbine blades in real engines. The final site trial indicated an order of magnitude improvement over the best existing technique in the detectability of a certain type of root cracking. The Development of a 2D Ultrasonic Array Inspection for Single Crystal Turbine Blades should be an inspiration for those starting out on doctoral degrees as it shows the complete development cycle from basic science to industrial usage.
Download or read book Anisotropic Nanomaterials written by Quan Li and published by Springer. This book was released on 2015-06-09 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book anisotropic one-dimensional and two-dimensional nanoscale building blocks and their assembly into fascinating and qualitatively new functional structures embracing both hard and soft components are explained. Contributions from leading experts regarding important aspects like synthesis, assembly, properties and applications of the above materials are compiled into a reference book. The anisotropy, i.e. the direction-dependent physical properties, of materials is fascinating and elegant and has sparked the quest for anisotropic materials with useful properties. With such a curiosity, material scientists have ventured into the realm of nanometer length scale and have explored the anisotropic nanoscale building blocks such as metallic and nonmetallic particles as well as organic molecular aggregates. It turns out that the anisotropic nanoscale building blocks, in addition to direction-dependent properties, exhibit dimension and morphology dependence of physical properties. Moreover, ordered arrays of anisotropic nanoscale building blocks furnish novel properties into the resulting system which would be entirely different from the properties of individual ones. Undoubtedly, these promising properties have qualified them as enabling building blocks of 21st century materials science, nanoscience and nanotechnology. Readers will find this book professionally valuable and intellectually stimulating in the rapidly emerging area of anisotropic nanomaterials. Quan Li, Ph.D., is Director of the Organic Synthesis and Advanced Materials Laboratory at the Liquid Crystal Institute of Kent State University, where he is also Adjunct Professor in the Chemical Physics Interdisciplinary Program. He has directed research projects funded by US Air Force Research Laboratory (AFRL), US Air Force Office of Scientific Research (AFSOR), US Army Research Office (ARO), US Department of Defense Multidisciplinary University Research Initiative (DoD MURI), US National Science Foundation (NSF), US Department of Energy (DOE), US National Aeronautics and Space Administration (NASA), Ohio Third Frontier, and Samsung Electronics, among others.
