Download or read book Structural Health Monitoring Technologies and Next Generation Smart Composite Structures written by Jayantha Ananda Epaarachchi and published by CRC Press. This book was released on 2016-09-15 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the increased use of composite materials in aerospace, energy, automobile, and civil infrastructure applications, concern over composite material failures has grown, creating a need for smart composite structures that are able to self-diagnose and self-heal. Structural Health Monitoring Technologies and Next-Generation Smart Composite Structures provides valuable insight into cutting-edge advances in SHM, smart materials, and smart structures. Comprised of chapters authored by leading researchers in their respective fields, this edited book showcases exciting developments in general embedded sensor technologies, general sensor technologies, sensor response interrogation and data communication, damage matrix formulation, damage mechanics and analysis, smart materials and structures, and SHM in aerospace applications. Each chapter makes a significant contribution to the prevention of structural failures by describing methods that increase safety and reduce maintenance costs in a variety of SHM applications.

Download or read book Anisotropic Behaviour of Damaged Materials written by Jacek J. Skrzypek and published by Springer Science & Business Media. This book was released on 2012-11-27 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scope of this book is based on the keynote lectures delivered during the Inter national Symposium on Anisotropic Behaviour of Damaged Materials ABDM, held in Krakow-Przegorzaiy, Poland, September 9-11, 2002. The Symposium was organized by the Solid Mechanics Division of the Institute of Mechanics and Machine Design - Cracow University of Technology, under aus pices of the Dean of the Faculty of Mechanical Engineering, Cracow University of Technology, Prof. S. Michalowski. The Co-organizers of the ABDM Symposium were: • Martin-Luther-Universitat Halle-Wittenberg, • Centre of Excellence for Advanced Materials and Structures AMAS at the In stitute of Fundamental Technological Research of the Polish Academy of Sci ences, Warsaw, • Committee of Mechanics of the Polish Academy of Sciences, Warsaw. Ten chapters of this book in their present form essentially exceed lectures de livered at the Symposium. They should rather be read as not only author's recent achievements in the field, but also the state of art and synthesis done by the lead ers in the mechanics community. The mixed formula of the Symposium, namely: the invited lectures and presentations of the original papers by the participants was used. 23 original papers, published in the Symposium Proceedings on CD, exhaust the full scope of the ABDM Symposium. The present book provides a survey of various damage models focusing on the damage response in anisotropic materials as well as damage-induced anisotropy.

Download or read book Micromechanics of Materials with Applications written by Mark Kachanov and published by Springer. This book was released on 2018-04-17 with total page 723 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on micromechanics explores both traditional aspects and the advances made in the last 10–15 years. The viewpoint it assumes is that the rapidly developing field of micromechanics, apart from being of fundamental scientific importance, is motivated by materials science applications. The introductory chapter provides the necessary background together with some less traditional material, examining e.g. approximate elastic symmetries, Rice’s technique of internal variables and multipole expansions. The remainder of the book is divided into the following parts: (A) classic results, which consist of Rift Valley Energy (RVE), Hill’s results, Eshelby’s results for ellipsoidal inhomogeneities, and approximate schemes for the effective properties; (B) results aimed at overcoming these limitations, such as volumes smaller than RVE, quantitative characterization of “irregular” microstructures, non-ellipsoidal inhomogeneities, and cross-property connections; (C) local fields and effects of interactions on them; and lastly (D) – the largest section – which explores applications to eight classes of materials that illustrate how to apply the micromechanics methodology to specific materials.

Download or read book Fundamentals of Microcrack Nucleation Mechanics written by and published by . This book was released on 1985 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: A foundation for ultrasonic evaluation of microcrack nucleation mechanics is identified in order to establish a basis for correlations between plane strain fracture toughness and ultrasonic factors through the interaction of elastic waves with material microstructures. Since microcracking is the origin of (brittle) fracture, it is appropriate to consider the role of stress waves in the dynamics of microcracking. Therefore, the following topics are discussed: (1) microstress distributions with typical microstructural defects located in the stress field; (2) elastic wave scattering from various idealized defects; and (3) dynamic effective-properties of media with randomly distributed inhomogeneities.

Download or read book Contemporary Research in Engineering Science written by Romesh C. Batra and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue failures occur in aerospace,marine,nuclear structures and automobile com ponents from initiation and propagation of cracks from holes,scratches or defects in the material. To design against these failures, crack propagation life and fracture strength need to be accurately predicted. It is reported in the literature, that these failures often initiate as surface cracks, corner cracks and cracks emanating from fastner holes. Such cracks are with elliptic or nearly elliptic in shapes. The deviation from elliptic shape is due to varying constraint effect along the crack front. Even in situations, when the cracks are through the thickness of the material, there would be thicknesswise variation of constraint effects leading to three dimensional nature of crack growth. Accurate predictions of the crack growth in these cases by numerical methods can be made only by solving three-dimensional boundary value problems. Empirical relationships have been developed [1] based on Linear Elastic Fracture Mechanics over years describing fatigue crack growth response. Some of these empirical relationships required modifications in the later stages, to meet the design applications. The Crack closure phenomenon discovered by Elber[2, 3] during the crack growth phase is mainly attributed to the local material yielding near the crack tip and the consequent residual plastic wake behind the crack tip. It helped considerably in understanding several aspects of fatigue crack growth and rewrite these relations.

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1970 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Continuum Thermomechanics written by Gérard A. Maugin and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributed by world-renowned specialists on the occasion of Paul Germain's 80th birthday, this unique book reflects the foundational works and the intellectual influence of this author. It presents the realm of modern thermomechanics with its extraordinary wealth of applications to the behaviour of materials, whether solid or fluid. The thirty-one contributions follow an easygoing autobiographical sketch by Paul Germain, and highlight the power and richness of a methodological approach to the phenomenology of many materials. This approach combines harmoniously thermodynamics and continuum theory in order to provide exploitable, thermodynamically admissible models of a large variety of behaviours and phenomena, including those of diffusion, thermoelasticity, viscoplasticity, relaxation, hysteresis, wetting, shape-memory effects, growth, phase transitions, stability, fracture, shocks, machining of materials, microstructured solids, complex fluids, etc. Especially aimed at graduate students, researchers, and engineers in mechanical engineering and materials science, this book also presents the state of the art in an active field of research and opens new horizons in other scientific fields, such as applied mathematics and applied physics, because of the intellectual satisfaction and remarkable efficiency provided by the advocated approach.

Download or read book Constitutive Modeling of Geomaterials written by Qiang Yang and published by Springer Science & Business Media. This book was released on 2012-08-22 with total page 779 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Second International Symposium on Constitutive Modeling of Geomaterials: Advances and New Applications (IS-Model 2012), is to be held in Beijing, China, during October 15-16, 2012. The symposium is organized by Tsinghua University, the International Association for Computer Methods and Advances in Geomechanics (IACMAG), the Committee of Numerical and Physical Modeling of Rock Mass, Chinese Society for Rock Mechanics and Engineering, and the Committee of Constitutive Relations and Strength Theory, China Institution of Soil Mechanics and Geotechnical Engineering, China Civil Engineering Society. This Symposium follows the first successful International Workshop on Constitutive Modeling held in Hong Kong, which was organized by Prof. JH Yin in 2007. Constitutive modeling of geomaterials has been an active research area for a long period of time. Different approaches have been used in the development of various constitutive models. A number of models have been implemented in the numerical analyses of geotechnical structures. The objective of the symposium is to provide a forum for researchers and engineers working or interested in the area of constitutive modeling to meet together and share new ideas, achievements and experiences through presentations and discussions. Emphasis is placed on recent advances of constitutive modeling and its applications in both theoretic and experimental aspects. Six famous scholars have been invited for the plenary speeches of the symposiums. Some prominent scholars have been invited to organize four specialized workshops on hot topics, including “Time-dependent stress-strain behavior of geomaterials”, “Constitutive modeling within critical state soil mechanics”, “Multiscale and multiphysics in geomaterials”, and “Damage to failure in rock structures”. A total of 49 papers are included in the above topics. In addition, 51 papers are grouped under three topics covering “Behaviour of geomaterials”, “Constitutive model”, and “Applications”. The editors expect that the book can be helpful as a reference to all those in the field of constitutive modeling of geomaterials.

Download or read book Design and Modeling of Mechanical Systems written by Mohamed Haddar and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 5th International Congress on Design and Modeling of Mechanical Systems (CMSM) was held in Djerba, Tunisia on March 25-27, 2013 and followed four previous successful editions, which brought together international experts in the fields of design and modeling of mechanical systems, thus contributing to the exchange of information and skills and leading to a considerable progress in research among the participating teams. The fifth edition of the congress (CMSM ́2013), organized by the Unit of Mechanics, Modeling and Manufacturing (U2MP) of the National School of Engineers of Sfax, Tunisia, the Mechanical Engineering Laboratory (MBL) of the National School of Engineers of Monastir, Tunisia and the Mechanics Laboratory of Sousse (LMS) of the National School of Engineers of Sousse, Tunisia, saw a significant increase of the international participation. This edition brought together nearly 300 attendees who exposed their work on the following topics: mechatronics and robotics, dynamics of mechanical systems, fluid structure interaction and vibroacoustics, modeling and analysis of materials and structures, design and manufacturing of mechanical systems. This book is the proceedings of CMSM ́2013 and contains a careful selection of high quality contributions, which were exposed during various sessions of the congress. The original articles presented here provide an overview of recent research advancements accomplished in the field mechanical engineering.

Download or read book A Course on Damage Mechanics written by Jean Lemaitre and published by Springer Science & Business Media. This book was released on 2013-12-14 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new branch of science usually develops thus. Somebody publishes the basic ideas. Hesitatingly at first, then little by little, other original contributions appear, until a certain threshold is reached. Then, overview articles are printed, conferences are held, and a first mention is made in textbooks, until specialized monographs are written. Continuum darnage mechanics has reached that status now. To analyze or, if possible, to predict the failure of machine parts or other structures is one of the main goals of engineering science. Consequently fracture mechanics became one of its leading branches. It was based on the analysis of existing cracks. However, especially under conditions of cyclic loading, this might be too late to prevent a disaster. Therefore, the question regarding the precursory state, that is, the evolution of intemal darnage before macrocracks become visible, was then posed. One of the successful approaches to the problern was Weibull's theory which examined, in a statistical manner, the "weakest link" in the material volume under consideration. Unfortunately it proved too difficult mathematically to be applied to complicated parts or structures. Therefore it was highly appreciated by the scientific of material community when L. M. Kachanov published in 1958 a simple model darnage which subsequently could be extended to brittle elastic, plastic or viscous materials under all conditions of uniaxial or multiaxial, simple or cyclic loadings, so that it may be considered nearly universal.

Download or read book Advances in Applied Mechanics written by and published by Academic Press. This book was released on 1993-12-07 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Applied Mechanics

Download or read book Rock Mechanics for Natural Resources and Infrastructure Development Full Papers written by Sergio A.B. Fontoura and published by CRC Press. This book was released on 2019-09-03 with total page 3791 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Mechanics for Natural Resources and Infrastructure Development contains the proceedings of the 14th ISRM International Congress (ISRM 2019, Foz do Iguaçu, Brazil, 13-19 September 2019). Starting in 1966 in Lisbon, Portugal, the International Society for Rock Mechanics and Rock Engineering (ISRM) holds its Congress every four years. At this 14th occasion, the Congress brings together researchers, professors, engineers and students around contemporary themes relevant to rock mechanics and rock engineering. Rock Mechanics for Natural Resources and Infrastructure Development contains 7 Keynote Lectures and 449 papers in ten chapters, covering topics ranging from fundamental research in rock mechanics, laboratory and experimental field studies, and petroleum, mining and civil engineering applications. Also included are the prestigious ISRM Award Lectures, the Leopold Muller Award Lecture by professor Peter K. Kaiser. and the Manuel Rocha Award Lecture by Dr. Quinghua Lei. Rock Mechanics for Natural Resources and Infrastructure Development is a must-read for academics, engineers and students involved in rock mechanics and engineering. Proceedings in Earth and geosciences - Volume 6 The ‘Proceedings in Earth and geosciences’ series contains proceedings of peer-reviewed international conferences dealing in earth and geosciences. The main topics covered by the series include: geotechnical engineering, underground construction, mining, rock mechanics, soil mechanics and hydrogeology.

Download or read book Fracture of Concrete and Rock written by Surendra P. Shah and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on Fracture of Concrete and Rock was organized by the Society for Experimental Mechanics (SEM) subdivision on Fracture of Concrete and Rock and RILEM Committee 89-FMT Fracture MechanicS of Concrete; Test Methods. The venue was Houston, Texas on June 17-19, 1987 and cooperation was provided by ACI 446, Fracture Mechanics and RILEM 90-FHA Fracture Mechanics of Concrete; Applications. The conference co-chai rmen were Professor S. P. Shah, Northwestern Uni versity and Professor S. E. Swartz, Kansas State University with the able assistance of Professor K. P. Chong, University of Wyoming. The conference theme was Fracture Mechanics Applications to Cracking and Fracture of Concrete (plain or reinforced) and Rock Subjected to Uniaxial or Complex Stress States with Static- or Dynamic-Loading Rates. This theme was chosen in recognition of parallel efforts between the rock mechanics community and researchers working in the application of fracture mechanics methods to the problem of cracking and fracture of concrete.

Download or read book Poromechanics written by J.F. Thimus and published by CRC Press. This book was released on 2020-12-18 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text features 105 papers dealing with the fundamentals and the applications of poromechanics from the Biot conference of 1998, held in Louvain-la-Neuve. Topics include: wave propogation; numerical modelling; identification of poromechanical parameters; and constitutive modelling.

Download or read book Fracture and Damage of Concrete and Rock FDCR 2 written by H.P. Rossmanith and published by CRC Press. This book was released on 2002-11-01 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book forms the Proceedings of the International Conference held in Vienna in November 1992 dealing with ageing, fatigue and fracture of concrete and concrete structures. Special sections cover demolition and recycling, and anchorage engineering. As well as selected international contributions, five specially invited plenary papers are included from Austria, Spain, Japan, Denmark and Sweden.

Download or read book Rock Damage and Fluid Transport Part I written by G. Dresen and published by Springer Science & Business Media. This book was released on 2008-01-24 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical properties and fluid transport in rocks are intimately linked as deformation of a solid rock matrix immediately affects the pore space and permeability. Part I of this topical volume covers mainly the nucleation and evolution of crack damage in rocks, new or modified techniques to measure rock fracture toughness and a discussion of upscaling techniques relating mechanical and fluid transport behaviour in rocks at different spatial scales.

Download or read book Design of Adhesive Joints Under Humid Conditions written by Lucas F. M. da Silva and published by Springer Science & Business Media. This book was released on 2013-07-16 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes most recent advances and limitations concerning design of adhesive joints under humid conditions and discusses future trends. It presents new approaches to predict the failure load after exposure to load, temperature and humidity over a long period of time. With the rapid increase in numerical computing power there have been attempts to formalize the different environmental contributions in order to provide a procedure to predict assembly durability, based on an initial identification of diffusion coefficients and mechanical parameters for both the adhesive and the interface. A coupled numerical model for the joint of interest is then constructed and this allows local water content to be defined and resulting changes in adhesive and interface properties to be predicted.