Download or read book Analytical Microextraction Techniques written by M. Valcárcel and published by Bentham Science Publishers. This book was released on 2017-01-13 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sample treatment has been the focus of intensive research in the last 20 years since it still remains a bottleneck in precise analytical procedures. The low concentration of the target analytes, the large amount of potential interfering agents and the incompatibility of the sample matrix with the instrumental techniques are the main reasons for these bottlenecks. In most of these methods, sample treatment is an unavoidable step and it has a clear influence on the quality (sensitivity, selectivity, and accuracy) of the final analytical results. While the usefulness of microextraction techniques has been established, their complete acceptance in analytical laboratories (including official methods of analysis) depends on their successful automation and integration with conventional analytical instrumentation. Analytical Microextraction Techniques presents comprehensive information about several analytical methods that are useful in the laboratory. These include: sorptive microextraction, solid and liquid phase microextraction, packed sorbent microextraction, miniaturized dispersive solid-phase extraction, thin film and nanoparticle based techniques, and membrane-based techniques. This is a vital reference on microextraction and sample preparation techniques for applied chemistry students, analytical chemists and laboratory technicians.

Download or read book Analytical Sample Preparation With Nano and Other High Performance Materials written by Rafael Lucena and published by Elsevier. This book was released on 2021-10-23 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analytical Sample Preparation With Nano- and Other High-Performance Materials covers advanced sample treatment techniques and the new materials that can be used to boost their performance. The evolution of sample treatment over the last two decades has resulted in the development of new techniques and application of new materials. This is a must-have resource for those studying advanced analytical techniques and the role of high-performance materials in analytical chemistry. The book explains the underlying principles needed to properly understand sample preparation, and also examines the latest materials - including nanomaterials - that result in greater sensitivity and specificity. The book begins with a section devoted to all the various sample preparation techniques and then continues with sections on high-performance sorbents and high-performance solvents. Combines basic, fundamental principles and advanced concepts and applications for a comprehensive treatment of sample preparation with new materials Defines nano- and other high-performance materials in this context, including carbon nanoparticles, inorganic nanoparticles, ionic liquids, supramolecular solvents, and more Includes discussion of all the latest advancements and new findings in both techniques and materials used for proper sample preparation

Download or read book Handbook of Solid Phase Microextraction written by Janusz Pawliszyn and published by Elsevier. This book was released on 2011-11-29 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: The relatively new technique of solid phase microextraction (SPME) is an important tool to prepare samples both in the lab and on-site. SPME is a "green" technology because it eliminates organic solvents from analytical laboratory and can be used in environmental, food and fragrance, and forensic and drug analysis. This handbook offers a thorough background of the theory and practical implementation of SPME. SPME protocols are presented outlining each stage of the method and providing useful tips and potential pitfalls. In addition, devices and fiber coatings, automated SPME systems, SPME method development, and In Vivo applications are discussed. This handbook is essential for its discussion of the latest SPME developments as well as its in depth information on the history, theory, and practical application of the method. Practical application of Solid Phase Microextraction methods including detailed steps Provides history of extraction methods to better understand the process Suitable for all levels, from beginning student to experienced practitioner

Download or read book Solvent Microextraction written by John M Kokosa and published by John Wiley & Sons. This book was released on 2009-10-05 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers both a practical as well a theoretical approach to Solvent Microextraction (SME) and will help analytical chemists to evaluate SME for a given sample preparation. Introductory chapters overview a comparison of SME with other sample preparation methods, a summary of the technical aspects, and a detailed theoretical treatment of SME. The book then describes the practical aspects of the technique, with detailed “how to” chapters devoted to the preparation and analysis of atmospheric, solid and liquid environmental, clinical and industrial samples. This text will serve as both a handy laboratory desk-reference and an indispensible instructional tool.

Download or read book Extraction Techniques in Analytical Sciences written by John R. Dean and published by John Wiley & Sons. This book was released on 2010-05-18 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book coves one of the most important areas in analytical sciences, extraction techniques for organic compounds in environmental and related matrices. This text discusses all of the key stages for analysing a sample for organic compounds from the initial sampling protocols, the range of different extraction techniques for solid, liquid and air samples through to the final chromatographic analysis. The topics covered include: Initial steps for solid, aqueous and air sampling. Extraction techniques for aqueous samples, including LLE, purge and trap, SPE, SPME, SBSE, SDME, membrane microextraction and MPES. Extraction techniques for solid samples, including Soxhlet, 'Soxtec', Shake-flask, sonication, PFE, MAE, SFE and MSPD. Extraction techniques for air sampling, including whole air, enrichment approaches and desorption techniques. Pre-concentration approaches for post-extraction. Practical aspects for chromatographic analysis (GC and HPLC) of organic compounds. Quality assurance aspects of analysis. Health and safety considerations. Key features include: Up-to-date information on the latest development in extraction techniques for organic compounds in environmental and food matrices. Ideal for use as a self-study guide, as the basis of a taught course or guided reading for new 'early-career' researchers. Includes a guide for the reader to other sources of information. Extraction Techniques in Analytical Sciences is suitable for undergraduate and postgraduate students, as well as providing an invaluable starting point for individuals undertaking applied research in the fields of analytical, bioanalytical, environmental and food sciences. The Analytical Techniques in the Sciences series of books provides coverage of all of the major analytical techniques and their application in the most important areas of physical, life and materials science. Each text is presented in an open learning/distance learning style, in which the learning objectives are clearly identified. the reader's understanding of the material is constantly evaluated by the use of self-assessment and discussion questions.

Download or read book Microextraction Techniques in Analytical Toxicology written by Rajeev Jain and published by CRC Press. This book was released on 2021-12-31 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microextraction Techniques in Analytical Toxicology provides the information readers need to include about cutting-edge sample preparation techniques into their everyday analytical practice, including comprehensive information about principles and state-of-the-art microextraction sample preparation techniques for the analysis of drugs and poisons in biological specimens, especially in forensic and clinical settings. This book also focuses on theoretical discussions of solid-based and liquid-based microextraction techniques, their method development, validation, and applications. A detailed compilation of analytical protocols based on published microextraction procedures to aid in method development, synthesis, and the application of green solvents (ionic liquids and deep eutectic solvents) and new sorbents, such as molecularly imprinted polymers, and their application in microextraction techniques are also covered. Features: Provides a systematic review of microextraction techniques applied in analytical toxicology A comprehensive guide for the practical implementation of microextraction techniques in forensic, clinical, and analytical laboratories Contains figures and tables for easy understanding and quick adaptation of the parameters of microextraction techniques Fundamentals, development, and applications of microextraction techniques as a sample preparation procedure are discussed in detail Extremely useful for the researchers and academicians engaged in analytical method development using microextraction techniques This book appeals to a wide readership of forensic, clinical, and analytical toxicologists, as well as academicians and researchers. Written by eminent scientists and leading experts on sample preparation techniques, this book serves as a desk reference for routine laboratory analysis and as an indispensable teaching tool in the classroom for graduate and Ph.D. students.

Download or read book Solid Phase Microextraction written by Janusz Pawliszyn and published by John Wiley & Sons. This book was released on 1997-04-21 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gesetzliche Auflagen und ökonomische Erwägungen steigern den Bedarf an Propenpräparations- und -extraktionstechniken, die ohne toxische organische Lösungsmittel auskommen. Die hier erstmals in Buchform veröffentlichte Festphasen-Mikroextraktion (SPME) ist ein neuartiges Verfahren, das diesen Anforderungen entspricht und gegenwärtig apparativ umgesetzt wird. Der Erfinder selbst, ein international anerkannter Pionier auf dem Gebiet der lösungsmittelfreien Extraktion, erklärt theoretische Hintergründe und praktische Anwendungsmöglichkeiten. SPME ist einfach, kostengünstig, automatisierbar, zeit- und analytsparend. Interessant für Analytiker in Industrie und Forschung, für Spurenanalytik, Umwelt- und pharmazeutische Chemie.

Download or read book Sample Preparation in LC MS Bioanalysis written by Wenkui Li and published by John Wiley & Sons. This book was released on 2019-03-12 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised and Expanded Handbook Provides Comprehensive Introduction and Complete Instruction for Sample Preparation in Vital Category of Bioanalysis Following in the footsteps of the previously published Handbook of LC-MS Bioanalysis, this book is a thorough and timely guide to all important sample preparation techniques used for quantitative Liquid Chromatography–Mass Spectrometry (LC-MS) bioanalysis of small and large molecules. LC-MS bioanalysis is a key element of pharmaceutical research and development, post-approval therapeutic drug monitoring, and many other studies used in human healthcare. While advances are continually being made in key aspects of LC-MS bioanalysis such as sensitivity and throughput, the value of research/study mentioned above is still heavily dependent on the availability of high-quality data, for which sample preparation plays the critical role. Thus, this text provides researchers in industry, academia, and regulatory agencies with detailed sample preparation techniques and step-by-step protocols on proper extraction of various analyte(s) of interest from biological samples for LC-MS quantification, in accordance with current health authority regulations and industry best practices. The three sections of the book with a total of 26 chapters cover topics that include: Current basic sample preparation techniques (e.g., protein precipitation, liquid-liquid extraction, solid-phase extraction, salting-out assisted liquid-liquid extraction, ultracentrifugation and ultrafiltration, microsampling, sample extraction via electromembranes) Sample preparation techniques for uncommon biological matrices (e.g., tissues, hair, skin, nails, bones, mononuclear cells, cerebrospinal fluid, aqueous humor) Crucial aspects of LC-MS bioanalytical method development (e.g., pre-analytical considerations, derivation strategies, stability, non-specific binding) in addition to sample preparation techniques for challenging molecules (e.g., lipids, peptides, proteins, oligonucleotides, antibody-drug conjugates) Sample Preparation in LC-MS Bioanalysis will prove a practical and highly valuable addition to the reference shelves of scientists and related professionals in a variety of fields, including pharmaceutical and biomedical research, mass spectrometry, and analytical chemistry, as well as practitioners in clinical pharmacology, toxicology, and therapeutic drug monitoring.

Download or read book Extraction Techniques for Environmental Analysis written by John R. Dean and published by John Wiley & Sons. This book was released on 2022-03-01 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extraction Techniques for Environmental Analysis Explore the analytical approach to extraction techniques In Extraction Techniques for Environmental Analysis, accomplished environmental scientist and researcher John R. Dean delivers a comprehensive discussion of the extraction techniques used for organic compounds relevant to environmental analysis. In the book, extraction techniques for aqueous, air, and solid environmental matrices are explored and case studies that highlight those techniques are included. Readers will find in-depth treatments of specific extraction techniques suitable for adoption in their own laboratories, as well as reviews of relevant analytical techniques used for the analysis of organic compound extracts (with a focus on chromatographic separation and detection). Extraction Techniques for Environmental Analysis also includes a chapter that extensively covers the requirements for an analytical laboratory, including health and safety standards, as well as: A thorough introduction to pre-sampling, as well as the extraction of aqueous samples, including the classical approach for aqueous extraction and solid phase extraction Comprehensive explorations of the extraction of gaseous samples, including air sampling Practical discussions of the extraction of solid samples, including pressurized fluid extraction and microwave-assisted extraction In-depth examinations of post-extraction procedures, including pre-concentration using solvent evaporation Extraction Techniques for Environmental Analysis is a must-read resource for undergraduate students of applied chemistry, as well as postgraduates taking analytical chemistry courses or courses in related disciplines, like forensic or environmental science.

Download or read book Sample Preparation Techniques in Analytical Chemistry written by Somenath Mitra and published by John Wiley & Sons. This book was released on 2004-04-07 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of accurate sample preparation techniques cannot be overstated--meticulous sample preparation is essential. Often overlooked, it is the midway point where the analytes from the sample matrix are transformed so they are suitable for analysis. Even the best analytical techniques cannot rectify problems generated by sloppy sample pretreatment. Devoted entirely to teaching and reinforcing these necessary pretreatment steps, Sample Preparation Techniques in Analytical Chemistry addresses diverse aspects of this important measurement step. These include: * State-of-the-art extraction techniques for organic and inorganic analytes * Sample preparation in biological measurements * Sample pretreatment in microscopy * Surface enhancement as a sample preparation tool in Raman and IR spectroscopy * Sample concentration and clean-up methods * Quality control steps Designed to serve as a text in an undergraduate or graduate level curriculum, Sample Preparation Techniques in Analytical Chemistry also provides an invaluable reference tool for analytical chemists in the chemical, biological, pharmaceutical, environmental, and materials sciences.

Download or read book Solid Phase Microextraction written by Gangfeng Ouyang and published by Springer. This book was released on 2016-11-24 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers comprehensive information on the developments and applications of the solid phase microextraction (SPME) technique. The first part of the book briefly introduces readers to the fundamentals of SPME, while subsequent sections describe the applications of SPME technique in detail, including environmental analysis (air, water, soil/sediments), food analysis (volatile/nonvolatile compounds), and bioanalysis (plants, animal tissues, body fluids). The advantages and future challenges of the SPME technique are also discussed. Including recent research advances and further developments of SPME, the book offers a practical reference guide and a valuable resource for researchers and users of SPME techniques. The target audience includes analytical chemists, environmental scientists, biological scientists, material scientists, and analysts, as well as students at universities/institutes in related fields. Dr. Gangfeng Ouyang is a Professor at the School of Chemistry and Chemical Engineering, Sun Yat-sen University, China. Dr. Ruifen Jiang is an Associate Professor at the School of Environment, Jinan University, China.

Download or read book Solid Phase Extraction written by Colin F. Poole and published by Elsevier. This book was released on 2019-09-12 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid Phase Extraction thoroughly presents both new and historic techniques for dealing with solid phase extraction. It provides all information laboratory scientists need for choosing and utilizing suitable sample preparation procedures for any kind of sample. In addition, the book showcases the contemporary uses of sample preparation techniques in the most important industrial and academic project environments, including solid-phase Microextraction, molecularly imprinted polymers, magnetic nanoparticles, and more. Written by recognized experts in their respective fields, this one-stop reference is ideal for those who need to know which technique to choose for solid phase extraction. Used in conjunction with a similar release, Liquid Phase Extraction, this book allows users to master this crucial aspect of sample preparation. Defines the current state-of-the-art in extraction techniques and the methods and procedures for implementing them in laboratory practice Includes extensive referencing that facilitates the identification of key information Aimed at both entry-level scientists and those who want to explore new techniques and methods

Download or read book Liquid Phase Extraction written by Colin F. Poole and published by Elsevier. This book was released on 2019-08-29 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid Phase Extraction thoroughly presents both existing and new techniques in liquid phase extraction. It not only provides all information laboratory scientists need for choosing and utilizing suitable sample preparation procedures for any kind of sample, but also showcases the contemporary uses of sample preparation techniques in the most important industrial and academic project environments, including countercurrent chromatography, pressurized-liquid extraction, single-drop Microextraction, and more. Written by recognized experts in their respective fields, it serves as a one-stop reference for those who need to know which technique to choose for liquid phase extraction. Used in conjunction with a similar release, Solid Phase Extraction, it allows users to master this crucial aspect of sample preparation. Defines the current state-of-the-art in extraction techniques and the methods and procedures for implementing them in laboratory practice Includes extensive referencing that facilitates the identification of key information Aimed at both entry-level scientists and those who want to explore new techniques and methods

Download or read book Trends in Microextraction Techniques for Sample Preparation written by and published by . This book was released on with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Micro-extraction techniques in sample preparation are gaining interest among analytical chemists as they comply with green analytical chemistry demands and ensure environmental protection and public safety. Savings in cost and time are considered as valuable benefits by using novel micro-extraction approaches in sample handling. Selectivity, sensitivity and lower detection limits are also included among the performance characteristics required to meet the legislation criteria. The target of this special issue is to present the state of art in microextraction sample preparation techniques. Modern, simple and efficient methods for preconcentration and separation are described for different analytes isolated from various matrices.

Download or read book Extraction Methods for Environmental Analysis written by John R. Dean and published by John Wiley & Sons. This book was released on 1998-08-10 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extraction Methods for Environmental Analysis is the first book to bring together all the extraction techniques used for analysis of liquid and solid environmental samples, including solid phase extraction and micro-extraction, supercritical fluid extraction, microwave-assisted extraction and accelerated solvent extraction. The book is divided into two sections - solid sample preparation and liquid sample preparation - to facilitate access, and each section starts with a summary of methods available. The techniques are compared and contrasted by means of 70 bar charts, all in two colours, and 32 tables. Relative merits of the techniques are discussed to enable the user to select the most appropriate technique for their sample and method of analysis. Extraction Methods for Environmental Analysis is essential reading for anyone involved in environmental analysis.

Download or read book Trends in Microextraction Techniques for Sample Preparation written by and published by Mdpi AG. This book was released on 2018-01-17 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-extraction techniques in sample preparation are gaining interest among analytical chemists as they comply with green analytical chemistry demands and ensure environmental protection and public safety. Savings in cost and time are considered as valuable benefits by using novel micro-extraction approaches in sample handling. Selectivity, sensitivity and lower detection limits are also included among the performance characteristics required to meet the legislation criteria. The target of this special issue is to present the state of art in microextraction sample preparation techniques. Modern, simple and efficient methods for preconcentration and separation are described for different analytes isolated from various matrices.

Download or read book Microextraction Techniques written by Miguel Ángel Rodríguez-Delgado and published by Springer. This book was released on 2024-03-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents detailed descriptions of the most relevant sorbent based and solvent-based microextraction techniques. The development of such miniaturised techniques is an important focus area in Green Analytical Chemistry as it allows for the reduction of toxic solvents and hazardous substances and decreases the complexity, cost, and time of analytical procedures. Numerous advances have been made in this field, and currently, there are a great number of microextraction techniques thanks to the development of novel materials such as nanomaterials and green solvents. This book provides an overview of the two main groups of microextractions, sorbent-based, and solvent-based. Each chapter focuses on the description of the technique fundamentals, the main applications, and the novel developments carried out in recent years written by a renowned expert or group of experts in the field. The main audience will be graduates, postgraduates, and researchers. It is also a useful resource for Master and Ph.D. students that are working in the development of sustainable extraction techniques