Download or read book Analysis of Value Creation and Value Capture in Microfluidics Market written by Shailendra Yadav and published by . This book was released on 2010 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in microfluidics in the last two decade have created a tremendous technological value which is shaping genomics; drug discovery; proteomics; and point-of-care diagnostics. The positive impact has resulted in faster analysis time, increased throughput and reduced cost amongst other important benefits. Yet, the life sciences end-users and the microfluidics players themselves are far from fully capturing the value. Author's own observation based on the experience at a leading genomics research institute, where multiple efforts to implement microfluidics technologies hardly succeeded, supports this fact. The failure to fully capture value has serious implications for the vendors developing microfluidics and the researchers employing these technologies. What are the reasons for this failure? What could be done to increase the value capture? Using well-established management frameworks, such as, s-curve, adopter's distribution model, the thesis studied the nature of value creation and value capture. Survey was used to quantify the impact and the diffusion and adoption of microfluidics technologies, as the respective indicators of value creation and value capture. The data support the insight obtained from the conceptual frameworks that microfluidics is still an immature technology. It also shows that immature technology is the primary reason for lack of full value capture rather than the lack of killer application or niche market - commonly reported reasons in the literature. As an immature technology, microfluidics is thus far still only in the hands of users who are innovators and early adopters - the academic laboratories and the research institutes. The application segments which have seen the most value capture are Genomics and Point-of-care diagnostics. The application segment which has seen the least value capture is Drug discovery. This thesis concludes with the recommendations for short and long term strategies for increasing value capture and accelerating the adoption of microfluidics.
Download or read book Optimization of Trustworthy Biomolecular Quantitative Analysis Using Cyber Physical Microfluidic Platforms written by Mohamed Ibrahim and published by CRC Press. This book was released on 2020-05-31 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: A microfluidic biochip is an engineered fluidic device that controls the flow of analytes, thereby enabling a variety of useful applications. According to recent studies, the fields that are best set to benefit from the microfluidics technology, also known as lab-on-chip technology, include forensic identification, clinical chemistry, point-of-care (PoC) diagnostics, and drug discovery. The growth in such fields has significantly amplified the impact of microfluidics technology, whose market value is forecast to grow from $4 billion in 2017 to $13.2 billion by 2023. The rapid evolution of lab-on-chip technologies opens up opportunities for new biological or chemical science areas that can be directly facilitated by sensor-based microfluidics control. For example, the digital microfluidics-based ePlex system from GenMarkDx enables automated disease diagnosis and can bring syndromic testing near patients everywhere. However, as the applications of molecular biology grow, the adoption of microfluidics in many applications has not grown at the same pace, despite the concerted effort of microfluidic systems engineers. Recent studies suggest that state-of-the-art design techniques for microfluidics have two major drawbacks that need to be addressed appropriately: (1) current lab-on-chip systems were only optimized as auxiliary components and are only suitable for sample-limited analyses; therefore, their capabilities may not cope with the requirements of contemporary molecular biology applications; (2) the integrity of these automated lab-on-chip systems and their biochemical operations are still an open question since no protection schemes were developed against adversarial contamination or result-manipulation attacks. Optimization of Trustworthy Biomolecular Quantitative Analysis Using Cyber-Physical Microfluidic Platforms provides solutions to these challenges by introducing a new design flow based on the realistic modeling of contemporary molecular biology protocols. It also presents a microfluidic security flow that provides a high-level of confidence in the integrity of such protocols. In summary, this book creates a new research field as it bridges the technical skills gap between microfluidic systems and molecular biology protocols but it is viewed from the perspective of an electronic/systems engineer.
Download or read book Organising for Value Creation Strategising for Value Capture written by Florian Homann and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microfluidics for Single cell Analysis written by and published by . This book was released on 2019 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the various microfluidic-based approaches for single-cell capture, isolation, manipulation, culture and observation, lysis, and analysis. Single-cell analysis reveals the heterogeneities in morphology, functions, composition, and genetic performance of seemingly identical cells, and advances in single-cell analysis can overcome the difficulties arising due to cell heterogeneity in the diagnostics for a targeted model of disease. This book provides a detailed review of the state-of-the-art techniques presenting the pros and cons of each of these methods. It also offers lessons learned and tips from front-line investigators to help researchers overcome bottlenecks in their own studies. Highlighting a number of techniques, such as microfluidic droplet techniques, combined microfluidics-mass-spectrometry systems, and nanochannel sampling, it describes in detail a new microfluidic chip-based live single-cell extractor (LSCE) developed in the editor's laboratory, which opens up new avenues to use open microfluidics in single-cell extraction, single-cell mass spectrometric analysis, single-cell adhesion analysis and subcellular operations. Serving as both an elementary introduction and advanced guidebook, this book interests and inspires scholars and students who are currently studying or wish to study microfluidics-based cell analysis methods.
Download or read book Microfluidics for Single Cell Analysis written by Jin-Ming Lin and published by Springer. This book was released on 2020-09-06 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the various microfluidic-based approaches for single-cell capture, isolation, manipulation, culture and observation, lysis, and analysis. Single-cell analysis reveals the heterogeneities in morphology, functions, composition, and genetic performance of seemingly identical cells, and advances in single-cell analysis can overcome the difficulties arising due to cell heterogeneity in the diagnostics for a targeted model of disease. This book provides a detailed review of the state-of-the-art techniques presenting the pros and cons of each of these methods. It also offers lessons learned and tips from front-line investigators to help researchers overcome bottlenecks in their own studies. Highlighting a number of techniques, such as microfluidic droplet techniques, combined microfluidics-mass-spectrometry systems, and nanochannel sampling, it describes in detail a new microfluidic chip-based live single-cell extractor (LSCE) developed in the editor’s laboratory, which opens up new avenues to use open microfluidics in single-cell extraction, single-cell mass spectrometric analysis, single-cell adhesion analysis and subcellular operations. Serving as both an elementary introduction and advanced guidebook, this book interests and inspires scholars and students who are currently studying or wish to study microfluidics-based cell analysis methods.
Download or read book Value Creation Through Mass Customization an Empirical Analysis of the Requisite Strategic Capabilities written by Thorsten Simon Harzer and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Value Creation in the Market Ecosystem written by Georgia Katsifaraki and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Putting Value Creation Back Into public Value written by and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Textbook of Personalized Medicine written by Kewal K. Jain and published by Springer Nature. This book was released on 2020-12-05 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is for personalized medicine as a prescription of specific treatments and therapeutics best suited for an individual and considers genetic as well as environmental factors that influence responses to therapy. Best approaches are described for integration of all available technologies for optimizing the therapy of individual patients. This comprehensive third edition covers the latest advances in personalized medicine and several chapters are devoted to various specialties, particulary cancer which is the largest area of application. The book discusses the development of personalized medicine and various players in it such as companies, academic institutions, the government, and the public as the consumer of healthcare. Additionally, the roles of bioinformatics, electronic health records, and digital technologies for personalized medicine are discussed. Textbook of Personalized Medicine, 3rd Edition serves as a convenient source of information for students at many levels and in a wide range of fields, including physicians, scientists, and decision makers in the biopharmaceutical and healthcare industries.
Download or read book Introductory Bioelectronics written by Ronald R. Pethig and published by John Wiley & Sons. This book was released on 2012-08-22 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioelectronics is a rich field of research involving the application of electronics engineering principles to biology, medicine, and the health sciences. With its interdisciplinary nature, bioelectronics spans state-of-the-art research at the interface between the life sciences, engineering and physical sciences. Introductory Bioelectronics offers a concise overview of the field and teaches the fundamentals of biochemical, biophysical, electrical, and physiological concepts relevant to bioelectronics. It is the first book to bring together these various topics, and to explain the basic theory and practical applications at an introductory level. The authors describe and contextualise the science by examining recent research and commercial applications. They also cover the design methods and forms of instrumentation that are required in the application of bioelectronics technology. The result is a unique book with the following key features: an interdisciplinary approach, which develops theory through practical examples and clinical applications, and delivers the necessary biological knowledge from an electronic engineer’s perspective a problem section in each chapter that readers can use for self-assessment, with model answers given at the end of the book along with references to key scientific publications discussions of new developments in the bioelectronics and biosensors fields, such as microfluidic devices and nanotechnology Supplying the tools to succeed, this text is the best resource for engineering and physical sciences students in bioelectronics, biomedical engineering and micro/nano-engineering. Not only that, it is also a resource for researchers without formal training in biology, who are entering PhD programmes or working on industrial projects in these areas.
Download or read book Microsystem Technology in Chemistry and Life Sciences written by Andreas Manz and published by Springer Science & Business Media. This book was released on 2003-09-05 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: "WHAT DOES NOT NEED TO BE BIG, WILL BE SMALL", a word by an engineer at a recent conference on chips technology. This sentence is particularly true for chemistry. Microfabrication technology emerged from microelectronics into areas like mechanics and now chemistry and biology. The engineering of micron and submicron sized features on the surface of silicon, glass and polymers opens a whole new world. Micromotors smaller than human hair have been fabricated and they work fine. It is the declared goal of the authors to bring these different worlds together in this volume. Authors have been carefully chosen to guarantee for the quality of the contents. An engineer, a chemist or a biologist will find new impulses from the various chapters in this book.
Download or read book Microfluidics and Lab on a Chip written by Andreas Manz and published by Royal Society of Chemistry. This book was released on 2020-09-24 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Responding to the need for an affordable, easy-to-read textbook that introduces microfluidics to undergraduate and postgraduate students, this concise book will provide a broad overview of the important theoretical and practical aspects of microfluidics and lab-on-a-chip, as well as its applications.
Download or read book Genetic Engineering News written by and published by . This book was released on 2006 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Science written by John Michels (Journalist) and published by . This book was released on 2006 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: A weekly record of scientific progress.
Download or read book Novel Technologies for Microalgae Utilization to Achieve Global Sustainable Development Goals SDGs written by Norio Nagao and published by Frontiers Media SA. This book was released on 2021-06-23 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lab on a Chip Devices and Micro Total Analysis Systems written by Jaime Castillo-León and published by Springer. This book was released on 2014-11-05 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers all the steps in order to fabricate a lab-on-a-chip device starting from the idea, the design, simulation, fabrication and final evaluation. Additionally, it includes basic theory on microfluidics essential to understand how fluids behave at such reduced scale. Examples of successful histories of lab-on-a-chip systems that made an impact in fields like biomedicine and life sciences are also provided. This book also: · Provides readers with a unique approach and toolset for lab-on-a-chip development in terms of materials, fabrication techniques, and components · Discusses novel materials and techniques, such as paper-based devices and synthesis of chemical compounds on-chip · Covers the four key aspects of development: basic theory, design, fabrication, and testing · Provides readers with a comprehensive list of the most important journals, blogs, forums, and conferences where microfluidics and lab-on-a-chip news, methods, techniques and challenges are presented and discussed, as well as a list of companies providing design and simulation support, components, and/or developing lab-on-a-chip and microfluidic devices.
Download or read book Microfluidics written by Yu Song and published by John Wiley & Sons. This book was released on 2018-05-07 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book offering a global overview of fundamental microfluidics and the wide range of possible applications, for example, in chemistry, biology, and biomedical science. As such, it summarizes recent progress in microfluidics, including its origin and development, the theoretical fundamentals, and fabrication techniques for microfluidic devices. The book also comprehensively covers the fluid mechanics, physics and chemistry as well as applications in such different fields as detection and synthesis of inorganic and organic materials. A useful reference for non-specialists and a basic guideline for research scientists and technicians already active in this field or intending to work in microfluidics.
