Download or read book Analysis of the Surface of Aramid Fibers After Gas Plasma Treatment and Plasma Polymerization Using Environmental Scanning Electron Microscopy and Fourier Transform Infrared Spectroscopy written by Werner Rehm and published by . This book was released on 1993 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Measurement of Bonding Properties in a Kevlar epoxy Composite After Fiber Surface Modification with Plasma Treatment written by Andre Knickrehm and published by . This book was released on 1993 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plasma Technologies for Textiles written by Roshan Shishoo and published by CRC Press. This book was released on 2007-03-09 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma technologies present an environmentally-friendly and versatile way of treating textile materials in order to enhance a variety of properties such as wettability, liquid repellency, dyeability and coating adhesion. Recent advances made in commercially viable plasma systems have greatly increased the potential of using plasma technology in industrial textile finishing. This pioneering book provides an essential guide to both the technology and science related to plasmas and its practical applications in the textile industry. The first part of the book discusses the science and technology behind plasmas. Chapters give detailed and comprehensive descriptions on the characteristics of plasmas and methods of control and treatment in the processing of textiles. Both low pressure cold plasma and atmospheric pressure cold plasma processes are described as well as the diagnosis and control of plasma parameters in plasma generating reactors. A chapter is devoted to the use of plasma technology to achieve nanoscale treatment of textile surfaces. The second part of the book concentrates on specific applications of plasma technologies. Chapters cover treatments for water and oil repellency of textiles, engineering of biomedical textiles and woollen finishing techniques through the use of plasma technologies. Further chapters cover the modification of fibres for use in composites and the potential use of plasma technologies for the finishing of fabrics made of man made fibres. The final chapter in the book gives a comprehensive analysis of the surface chemical and physical characterisation of plasma treated fabrics. Written by a distinguished international team of experts, Plasma technologies for textiles is an invaluable reference for researchers, scientists and technologists alike. Summarises both the science and technology of plasma processing, and its practical applicationsDiscusses how plasma technology improves textile properties such as wettability and liquid repellingAn invaluable reference for researchers, scientists and technologists
Download or read book Textile Technology Digest written by and published by . This book was released on 1993 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis of Single Polymer Fibers by Fourier Transform Infrared Microscopy written by MW. Tungol and published by . This book was released on 1991 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared (IR) microscopic analysis was performed in tandem with traditional techniques of fiber analysis in case studies in order to determine the feasibility of IR microscopy as a routine technique for fiber analysis. All fibers which were comparable by visual, optical microscopy were also found to be comparable by IR microscopy. Several minor spectral differences between comparable fibers were encountered. The sources of these spectral differences fell into three major categories: (1) interference fringes, (2) contaminants, and (3) pressure effects due to sample preparation. The utility of a computerized spectral library of fibers for the identification of generic class and subclass was evaluated. Sheath and core bicomponent fibers were also examined along with a new type of poly(benzimidazole) (PBI), a high-performance fiber.
Download or read book Conference Papers Index written by and published by . This book was released on 1987 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineered Interfaces in Fiber Reinforced Composites written by Jang-Kyo Kim and published by Elsevier. This book was released on 1998-10-21 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study and application of composite materials are a truly interdisciplinary endeavour that has been enriched by contributions from chemistry, physics, materials science, mechanics and manufacturing engineering. The understanding of the interface (or interphase) in composites is the central point of this interdisciplinary effort. From the early development of composite materials of various nature, the optimization of the interface has been of major importance. While there are many reference books available on composite materials, few of them deal specifically with the science and mechanics of the interface of fiber reinforced composites. Further, many recent advances devoted solely to research in composite interfaces have been scattered in a variety of published literature and have yet to be assembled in a readily accessible form. To this end this book is an attempt to bring together recent developments in the field, both from the materials science and mechanics perspective, in a single convenient volume.The central theme of the book is tailoring the interface properties to optimise the mechanical peformance and structural integrity of composites with enhanced strength/stiffness and fracture toughness (or specific fracture resistance). It deals mainly with interfaces in advanced composites made from high performance fibers, such as glass, carbon, aramid, ultra high modulus polyethylene and some inorganic (e.g. B/W, A12O3, SiC) fibers, and matrix materials encompassing polymers, metals/alloys and ceramics. The book is intended to provide a comprehensive treatment of composite interfaces in such a way that it should be of interest to materials scientists, technologists and practising engineers, as well as graduate students and their supervisors in advanced composites. We hope that this book will also serve as a valuable source of reference to all those involved in the design and research of composite interfaces.The book contains eight chapters of discussions on microstructure-property relationships with underlying fundamental mechanics principles. In Chapter 1, an introduction is given to the nature and definition of interfaces in fiber reinforced composites. Chapter 2 is devoted to the mechanisms of adhesion which are specific to each fiber-matrix system, and the physio-chemical characterization of the interface with regard to the origin of adhesion. The experimental techniques that have been developed to assess the fiber-matrix interface bond quality on a microscopic scale are presented in Chapter 3, along with the techniques of measuring interlaminar/intralaminar strengths and fracture toughness using bulk composite laminates. The applicability and limitations associated with loading geometry and interpretation of test data are compared. Chapter 4 presents comprehensive theoretical analyses based on shear-lag models of the single fiber composite tests, with particular interest being placed on the interface debond process and the nature of the fiber-matrix interfacial bonding. Chapter 5 is devoted to reviewing current techniques of fiber surface treatments which have been devised to improve the bond strength and the fiber-matrix compatibility/stability during the manufacturing processes of composites. The micro-failure mechanisms and their associated theories of fracture toughness of composites are discussed in Chapter 6. The roles of the interface and its effects on the mechanical performance of fiber composites are addressed from several viewpoints. Recent research efforts to augment the transverse and interlaminar fracture toughness by means of controlled interfaces are presented in Chapters 7 and 8.
Download or read book Natural Fiber Composites written by R.D.S.G. Campilho and published by CRC Press. This book was released on 2015-11-05 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings value to anyone working with or designing natural fiber composite structures. It helps readers understand the value these materials can add to projects, how to choose the best materials and treatments, how to safely design and fabricate products made of natural fiber composites, and how to test them for safety. It covers the characterization of natural fibers, matrices and respective composites, and how to enhance their performance and processing as well as testing and degradation issues.
Download or read book Infrared and Raman Spectroscopy of Polymers written by H. W. Siesler and published by . This book was released on 1980 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Innovative and Emerging Technologies for Textile Dyeing and Finishing written by Luqman Jameel Rather and published by John Wiley & Sons. This book was released on 2021-02-17 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the public enhanced awareness towards eco-preservation, eco-safety and health concerns, environmentally benign, nontoxic and sustainable bioresource materials produced mainly from non-food crops have revolutionized all industrial sectors particularly textile industry. In recent years, textile industries in developed countries are getting increasing interest in global interest due to the varied and changing world market conditions in terms of price, durability and fiber mixtures as well as design, colors, weight, ease of handling and product safety. The increasing environmental and health concerns owing to the use of large quantities of water and hazardous chemicals in conventional textile finishing processes lead to the design and development of new dyeing strategies and technologies. Effluents produced from these textiles wet processing industries are very diverse in chemical composition, ranging from inorganic finishing agents, surfactants, chlorine compounds, salts, total phosphate to polymers and organic products. This aspect forced western countries to exploit their high technical skills in the advancements of textile materials for high quality technical performances, and development of cleaner production technologies for cost effective and value-added textile materials. Therefore, vast and effective research investigations have been undertaken all over the world to minimize the negative environmental impact of synthetic chemical agents through the sustainable harvest of eco-friendly bioresource materials. The book will discuss following research developments in academic and industry: Improvement in dye extraction and its applications Impact of textile dyeing on environment Textile finishing by natural and ecofriendly means Natural dyes as environmental-friendly bioresource products Textile effluent remediation via physical, chemical and biological processes.
Download or read book Engineering Biopolymers Homopolymers Blends and Composites written by Stoyko Fakirov and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2015-05-07 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique volume covers the results of the world-wide efforts to implement natural polymers as engineering plastics and the use of their inherent properties. The processing opportunities and the applications of the natural materials as reinforcement of polymer composites are discussed, including the structural, morphological and thermal characterization as well as the mechanical behavior of the obtained materials. Also covered is the preparation of biodegradable homopolymers, blends and composites, which involves chemical reactions, regardless of the type of the starting material.
Download or read book High Performance Polymers and Engineering Plastics written by Vikas Mittal and published by John Wiley & Sons. This book was released on 2011-09-09 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes advances in synthesis, processing, and technology of environmentally friendly polymers generated from renewable resources. With contents based on a wide range of functional monomers and contributions from eminent researchers, this volume demonstrates the design, synthesis, properties and applications of plant oil based polymers, presenting an elaborate review of acid mediated polymerization techniques for the generation of green polymers. Chemical engineers are provided with state-of-the-art information that acts to further progress research in this direction.
Download or read book Surface Modification of Textiles written by Q Wei and published by Elsevier. This book was released on 2009-08-26 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: The surface of textiles offers an important platform for functional modifications in order to meet special requirements for a variety of applications. The surface modification of textiles may be achieved by various techniques ranging from traditional solution treatment to biological approaches. This book reviews fundamental issues relating to textile surfaces and their characterisation and explores the exciting opportunities for surface modification of a range of different textiles.Introductory chapters review some important surface modification techniques employed for improved functional behaviour of textiles and the various surface characterisation methods available. Further chapters examine the different types of surface modification suitable for textiles, ranging from the use of plasma treatments and physical vapour deposition to the use of nanoparticles. Concluding chapters discuss surface modification strategies for various applications of textiles.Surface modification of textiles is a valuable resource for chemists, surface scientists, textile technologists, fibre scientists, textile engineers and textile students. - Reviews fundamental issues relating to textiles surfaces and their characterisation - Examines various types of surface modification suitable for textiles, including plasma treatments and nanoparticles - Discusses surface modification strategies for textile applications such as expansion into technical textile applications
Download or read book Biodegradable Green Composites written by Susheel Kalia and published by John Wiley & Sons. This book was released on 2016-02-29 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively addresses surface modification of natural fibers to make them more effective, cost-efficient, and environmentally friendly. Topics include the elucidation of important aspects surrounding chemical and green approaches for the surface modification of natural fibers, the use of recycled waste, properties of biodegradable polyesters, methods such as electrospinning, and applications of hybrid composite materials.
Download or read book Materials Design and Manufacturing for Sustainable Environment written by Santhakumar Mohan and published by Springer Nature. This book was released on 2021-02-06 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the select proceedings of the International Conference on Materials, Design and Manufacturing for Sustainable Environment (ICMDMSE 2020). The primary focus is on emerging materials and cutting-edge manufacturing technologies for sustainable environment. The book covers a wide range of topics such as advanced materials, vibration, tribology, finite element method (FEM), heat transfer, fluid mechanics, energy engineering, additive manufacturing, robotics and automation, automobile engineering, industry 4.0, MEMS and nanotechnology, optimization techniques, condition monitoring, and new paradigms in technology management. Contents of this book will be useful to students, researchers, and practitioners alike.
Download or read book Reverse Engineering of Rubber Products written by Saikat Das Gupta and published by CRC Press. This book was released on 2013-09-19 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reverse engineering is widely practiced in the rubber industry. Companies routinely analyze competitors’ products to gather information about specifications or compositions. In a competitive market, introducing new products with better features and at a faster pace is critical for any manufacturer. Reverse Engineering of Rubber Products: Concepts, Tools, and Techniques explains the principles and science behind rubber formulation development by reverse engineering methods. The book describes the tools and analytical techniques used to discover which materials and processes were used to produce a particular vulcanized rubber compound from a combination of raw rubber, chemicals, and pigments. A Compendium of Chemical, Analytical, and Physical Test Methods Organized into five chapters, the book first reviews the construction of compounding ingredients and formulations, from elastomers, fillers, and protective agents to vulcanizing chemicals and processing aids. It then discusses chemical and analytical methods, including infrared spectroscopy, thermal analysis, chromatography, and microscopy. It also examines physical test methods for visco-elastic behavior, heat aging, hardness, and other features. A chapter presents important reverse engineering concepts. In addition, the book includes a wide variety of case studies of formula reconstruction, covering large products such as tires and belts as well as smaller products like seals and hoses. Get Practical Insights on Reverse Engineering from the Book’s Case Studies Combining scientific principles and practical advice, this book brings together helpful insights on reverse engineering in the rubber industry. It is an invaluable reference for scientists, engineers, and researchers who want to produce comparative benchmark information, discover formulations used throughout the industry, improve product performance, and shorten the product development cycle.
Download or read book Polypropylene Handbook written by József Karger-Kocsis and published by Springer. This book was released on 2019-03-18 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book extensively reviews Polypropylene (PP), the second most widely produced thermoplastic material, having been produced for over 60 years. Its synthesis, processing and application are still accompanied by vigorous R&D developments because the properties of PP are at the borderline between those of commodity and engineering thermoplastics. Readers are introduced to various tacticities and polymorphs of PP, and their effects on structural properties. Further, the book addresses the control of optical properties using nucleants, provides strategies for overcoming the limited cold/impact resistance of PP, examines in detail the effects of recycling, and presents guidelines for the property modification of PPs through foaming, filling and reinforcing with respect to target applications. Special attention is paid to descriptions and models of properties as a function of morphological variables. Last but not least, the book suggests potential practical applications of PP-based systems, especially in the packaging, appliances, building/construction, textile and automotive sectors. Each chapter, written by internationally respected scientists, reflects the current state-of-art in the respective field and offers a vital source of information for students, researchers and engineers interested in the morphology, properties, testing and modeling of PP and PP-based systems. The content is indispensable to the appropriate application of PPs and related composites.
