Download or read book Thermal Analysis of Polymeric Materials written by Bernhard Wunderlich and published by Springer Science & Business Media. This book was released on 2005-04-04 with total page 918 pages. Available in PDF, EPUB and Kindle. Book excerpt: Table of Contents Table of Contents 1 Atoms, small, and large molecules 2 Basics of thermal analysis 3 Dynamics of chemical and phase changes 4 Thermal analysis tools 5 Structure and properties of materials 6 Single component materials 7 Multiple component materials App. A.1 Table of thermal properties of linear macromolecules and related small molecules - the ATHAS data bank App. A.2 Radiation scattering App. A.3 Derivation of the Rayleigh ratio App. A.4 Neural network predictions App. A.5 Legendre transformations, Maxwell relations, linking of entropy and probability, and derivation of (dS/dT) App. A.6 Boltzmann distribution, harmonic vibration, complex numbers, and normal modes App. A.7 Summary of the basic kinetics of chemical reactions App. A.8 The ITS 1990 and the Krypton-86 length standard App. A.9 Development of classical DTA to DSC App. A.10 Examples of DTA and DSC under extreme conditions App. A.11 Description of an online correction of the heat-flow rate App. A.12 Derivation of the heat-flow equations App. A.13 Description of sawtooth-modulation response App. A.14 An introduction to group theory, definitions of configurations and conformations, and a summary of rational and irrational numbers App. A.15 Summary of birefringence and polarizing microscopy App. A.16 Summary of X-ray diffraction and interference effects App. A.17 Optical analog of electron double diffraction to produce Moire patterns.

Download or read book NASA Strategic Plan written by United States. National Aeronautics and Space Administration and published by . This book was released on 1994 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Characterization of Minerals Metals and Materials 2019 written by Bowen Li and published by Springer. This book was released on 2019-02-13 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection gives broad and up-to-date results in the research and development of materials characterization and processing. Topics covered include characterization methods, ferrous materials, non-ferrous materials, minerals, ceramics, polymer and composites, powders, extraction, microstructure, mechanical behavior, processing, corrosion, welding, solidification, magnetic, electronic, environmental, nano-materials, and advanced materials The book explores scientific processes to characterize materials using modern technologies, and focuses on the interrelationships and interdependence among processing, structure, properties, and performance of materials.

Download or read book Low Frequency Vibrations of Inorganic and Coordination Compounds written by John R. Ferraro and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the course of far-infrared investigations of inorganic and coordina tion compounds at Argonne National Laboratory in the years 1962-1966, it became apparent that no suitable book existed which correlated and dis cussed the important vibrations occurring in this region for these molecules. Early in 1967 the initial steps were taken to write such a book. Then, in 1968, an excellent text by Professor David M. Adams entitled Metal-Ligand and Related Vibrations was published. At this point serious consideration was given to discontinuing work on this book. However, upon examination of Adams' book, it became clear that the references covered only the period to 1966. This field of research is accelerating so tremendously, and the period 1966-1969 has seen so many new studies, that upon reconsideration it was decided to continue writing this text. The references in this book, particularly in the last several chapters, include many papers published in 1969. However, the proliferation of the far-infrared literature has made it impossible to present all the published material that has any bearing on the subject. Many titles do not pertain primarily to the far-infrared region as such, and some of this research has been omitted for this reason. Organometallic compounds have been neglected since the author feels that adequate reviews of that subject are available. Other studies may be missing simply because, owing to space limitations, only the more important researches could be considered. Of course, "importance" may, in this case, reflect the author's interest and prejudices.

Download or read book Fourier Transforms written by Goran Nikolic and published by BoD – Books on Demand. This book was released on 2011-04-01 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: New analytical strategies and techniques are necessary to meet requirements of modern technologies and new materials. In this sense, this book provides a thorough review of current analytical approaches, industrial practices, and strategies in Fourier transform application.

Download or read book Extreme Events in Geospace written by Natalia Buzulukova and published by Elsevier. This book was released on 2017-12-01 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extreme Events in Geospace: Origins, Predictability, and Consequences helps deepen the understanding, description, and forecasting of the complex and inter-related phenomena of extreme space weather events. Composed of chapters written by representatives from many different institutions and fields of space research, the book offers discussions ranging from definitions and historical knowledge to operational issues and methods of analysis. Given that extremes in ionizing radiation, ionospheric irregularities, and geomagnetically induced currents may have the potential to disrupt our technologies or pose danger to human health, it is increasingly important to synthesize the information available on not only those consequences but also the origins and predictability of such events. Extreme Events in Geospace: Origins, Predictability, and Consequences is a valuable source for providing the latest research for geophysicists and space weather scientists, as well as industries impacted by space weather events, including GNSS satellites and radio communication, power grids, aviation, and human spaceflight. The list of first/second authors includes M. Hapgood, N. Gopalswamy, K.D. Leka, G. Barnes, Yu. Yermolaev, P. Riley, S. Sharma, G. Lakhina, B. Tsurutani, C. Ngwira, A. Pulkkinen, J. Love, P. Bedrosian, N. Buzulukova, M. Sitnov, W. Denig, M. Panasyuk, R. Hajra, D. Ferguson, S. Lai, L. Narici, K. Tobiska, G. Gapirov, A. Mannucci, T. Fuller-Rowell, X. Yue, G. Crowley, R. Redmon, V. Airapetian, D. Boteler, M. MacAlester, S. Worman, D. Neudegg, and M. Ishii. - Helps to define extremes in space weather and describes existing methods of analysis - Discusses current scientific understanding of these events and outlines future challenges - Considers the ways in which space weather may affect daily life - Demonstrates deep connections between astrophysics, heliophysics, and space weather applications, including a discussion of extreme space weather events from the past - Examines national and space policy issues concerning space weather in Australia, Canada, Japan, the United Kingdom, and the United States

Download or read book Advanced Coating Materials written by Liang Li and published by John Wiley & Sons. This book was released on 2018-12-06 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive, yet practical source of reference, and excellent foundation for comparing the properties and performance of coatings and selecting the most suitable materials based on specific service needs and environmental factors. Coating technology has developed significant techniques for protecting existing infrastructure from corrosion and erosion, maintaining and enhancing the performance of equipment, and provided novel functions such as smart coatings greatly benefiting the medical device, energy, automotive and construction industries. The mechanisms, usage, and manipulation of cutting-edge coating methods are the focus of this book. Not only are the working mechanisms of coating materials explored in great detail, but also craft designs for further optimization of more uniform, safe, stable, and scalable coatings. A group of leading experts in different coating technologies demonstrate their main applications, identify the key bottlenecks, and outline future prospects. Advanced Coating Materials broadly covers the coating techniques, including cold spray, plasma vapor deposition, chemical vapor deposition, sol–gel method, etc., and their significant applications in microreactor technology, super(de)wetting, joint implants, electrocatalyst, etc. Numerous kinds of coating structures are addressed, including nanosize particles, biomimicry structures, metals and complexed materials, along with the environmental and human compatible biopolymers resulting from microbial activities. This state-of-the-art book is divided into three parts: (1) Materials and Methods: Design and Fabrication, (2) Coating Materials: Nanotechnology, and (3) Advanced Coating Technology and Applications.

Download or read book Newnes Radio and RF Engineering Pocket Book written by Steve Winder and published by Newnes. This book was released on 2002-09-24 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preface; Propagation of radio waves; The decibel scale; Transmission lines; Antennas; Resonant circuits; Oscillators; Piezo-electric devices; Bandwidth requirements and modulation; Frequency planning; Radio equipment; Microwave communication; Information privacy and encryption; Multiplexing; Speech digitization and synthesis; VHF and UHF mobile communication; Signalling; Mobile radio systems; Base station site management; Instrumentation; Batteries; Satellite communications; Connectors and interfaces; Broadcasting; Abbreviations and symbols; Miscellaneous data; Index.

Download or read book Photoneutron Sources written by B. W. Sargent and published by . This book was released on 1946 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Characterization of Minerals Metals and Materials 2018 written by Bowen Li and published by Springer. This book was released on 2018-01-17 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection gives broad and up-to-date results in the research and development of materials characterization and processing. Coverage is well-rounded from minerals, metals, and materials characterization and developments in extraction to the fabrication and performance of materials. In addition, topics as varied as structural steels to electronic materials to plant-based composites are explored. The latest research presented in this wide area make this book both timely and relevant to the materials science field as a whole. The book explores scientific processes to characterize materials using modern technologies, and focuses on the interrelationships and interdependence among processing, structure, properties, and performance of materials. Topics covered include ferrous materials, non-ferrous materials, minerals, ceramics, clays, soft materials, method development, processing, corrosion, welding, solidification, composites, extraction, powders, nanomaterials, advanced materials, and several others.

Download or read book Ceramic Materials written by C. Barry Carter and published by Springer Science & Business Media. This book was released on 2013-01-04 with total page 775 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic Materials: Science and Engineering is an up-to-date treatment of ceramic science, engineering, and applications in a single, comprehensive text. Building on a foundation of crystal structures, phase equilibria, defects, and the mechanical properties of ceramic materials, students are shown how these materials are processed for a wide diversity of applications in today's society. Concepts such as how and why ions move, how ceramics interact with light and magnetic fields, and how they respond to temperature changes are discussed in the context of their applications. References to the art and history of ceramics are included throughout the text, and a chapter is devoted to ceramics as gemstones. This course-tested text now includes expanded chapters on the role of ceramics in industry and their impact on the environment as well as a chapter devoted to applications of ceramic materials in clean energy technologies. Also new are expanded sets of text-specific homework problems and other resources for instructors. The revised and updated Second Edition is further enhanced with color illustrations throughout the text.

Download or read book Radiation Effects in Polymeric Materials written by Vijay Kumar and published by Springer. This book was released on 2019-02-09 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: ​This book provides an introduction of how radiation is processed in polymeric materials, how materials properties are affected and how the resulting materials are analyzed. It covers synthesis, characterization, or modification of important materials, e.g. polycarbonates, polyamides and polysaccharides, using radiation. For example, a complete chapter is dedicated to the characterization of biodegradable polymers irradiated with low and heavy ions. This book will be beneficial to all polymer scientists in the development of new macromolecules and to all engineers using these materials in applications. It summarizes the fundamental knowledge and latest innovations in research fields from medicine to space.

Download or read book The 23rd Cycle written by Sten F. Odenwald and published by Columbia University Press. This book was released on 2001 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 23rd Cycle includes a history of the record of auroral sightings, accounts of blackouts from the nineteenth and twentieth centuries, industries sensitive to solar storms, and radiation and health issues."--Jacket.

Download or read book Handbook of Pyrotechnics written by Karl O. Brauer and published by Chemical Publishing Company. This book was released on 1974-07-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides extremely useful data and information about theory and industrial applications that formerly were limited to applications in military ordnance, fireworks, and rock blasting. These "civilian" applications include spacecraft, aircraft, underwater vehicle systems, metal forming, cladding, riveting and some other production methods. Also pairs well with: Fireworks, Principles and Practice, 4th Edition, ISBN: 0820604070; Military and Civilian Pyrotechnics, ISBN: 0820603643; Pyrotechnics, ISBN: 0820601128. Visit us at www.chemical-publishing.com

Download or read book Graphene written by Wonbong Choi and published by CRC Press. This book was released on 2016-04-19 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the late 20th century, graphene-a one-atom-thick planar sheet of sp2-bonded carbon atoms densely packed in a honeycomb crystal lattice-has garnered appreciable attention as a potential next-generation electronic material due to its exceptional properties. These properties include high current density, ballistic transport, chemical inertness,

Download or read book Reactive Modifiers for Polymers written by S. Al-Malaika and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical modification of polymers by reactive modifiers is no longer an academic curiosity but a commercial reality that has delivered a diverse range of speciality materials for niche markets: reactively grafted styrenic alloys, maleated polyolefins, super-tough nylons, silane modified and moisture-cured polyolefins, and thermoplastic elastomers, are but few exam ples of commercial successes. Although the approach of reactive modification of polymers has been largely achieved either in solution or in the solid state (through in situ reactions in polymer melts), it is the latter route that has attracted most attention in the last two decades owing to its flexibility and cost-effective ness. This route, referred to as reactive processing, focuses on the use of suitable reactive modifier(s) and the adoption of conventional polymer processing machinery, an extruder or a mixer, as a chemical reactor, to perform in situ targeted reactions for chemical modification of preformed polymers. This relatively simple, though scientifically highly challenging, approach to reactive modification offers unique opportunities in exploiting various reactive modifiers for the purpose of altering and transforming in a controlled manner the properties of preformed commercial polymers into new/speciality materials with tailor-made properties and custom-designed performance for target applications. Such an economically attractive route constitutes a radical diversion away from the traditional practices of manufacturing new polymers from monomers which involves massive in vestments in sophisticated technologies and chemical plants.

Download or read book World Congress on Medical Physics and Biomedical Engineering 2018 written by Lenka Lhotská and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the IUPESM World Congress on Biomedical Engineering and Medical Physics, a tri-annual high-level policy meeting dedicated exclusively to furthering the role of biomedical engineering and medical physics in medicine. The book offers papers about emerging issues related to the development and sustainability of the role and impact of medical physicists and biomedical engineers in medicine and healthcare. It provides a unique and important forum to secure a coordinated, multileveled global response to the need, demand, and importance of creating and supporting strong academic and clinical teams of biomedical engineers and medical physicists for the benefit of human health.