Download or read book New Approaches and Concepts in Turbulence written by T. Dracos and published by Springer Science & Business Media. This book was released on 1993-09-01 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of a colloquium held in Monte Verità from September 9-13, 1991. Special care has been taken to devote adequate space to the scientific discussions, which claimed about half of the time available. Scientists from all over the world presented their views on the importance of kinematic properties, topology and fractal geometry, and on the dynamic behaviour of turbulent flows. They debated the importance of coherent structures and the possibility to incorporate these in the statistical theory of turbulence, as well as their significance for the reduction of the degrees of freedom and the prospective of dynamical systems and chaos approaches to the problem of turbulence. Also under discussion was the relevance of these new approaches to the study of the instability and the origin of turbulence, and the importance of numerical and physical experiments in improving the understanding of turbulence.

Download or read book American Doctoral Dissertations written by and published by . This book was released on 1995 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1974 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Turbulence 2 written by Hans-Hermann Fernholz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Second European Turbulence Conference was held at the Technische Univer sitat Berlin, Federal Republic of Germany, from August 30th to September 2nd 1988 under the auspices of the European Mechanics Committee. It was primar ily devoted to fundamental aspects of turbulence, and aimed at bringing together engineers, physicists, and mathematicians. The scientific committee - serving also as Sub-committee of the European Turbulence Conference - consisted of the following members: G. Comte-Bellot (Lyon), H.-H. Fernholz and H.E. Fiedler (both from Berlin) as co-chairmen of the conference, U. Frisch (Nice), J.C.R. Hunt (Cambridge), E. Krause (Aachen), M. Landahl (Stockholm), A.M. Obukhov (Moscow), and G. Ooms (Amsterdam). The conference programme comprised 6 invited lectures and 94 contributions, presented either orally or at poster sessions. There were 165 participants from 18 countries. All papers published in these conference proceedings were, with the exception of the invited ones, again refereed by the members of the scientific committee. The main research topics discussed at this meeting were stability and gener ation of turbulence, effects of rotation, stratification and buoyancy forces, novel instrumentation, manipulation and control, boundary layers with separation and reattachment, computer simulation, turbulent diffusion, image analysis and flow visualization, vorticity dynamics and turbulence, and large-scale structures. We have taken the liberty of regrouping some papers following the submitted final versions for this volume. Authors may therefore find their paper under a different heading from that in the conference programme.

Download or read book Comprehensive Dissertation Index written by and published by . This book was released on 1984 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Physics Briefs written by and published by . This book was released on 1991 with total page 1114 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Unsteady Computational Fluid Dynamics in Aeronautics written by P.G. Tucker and published by Springer Science & Business Media. This book was released on 2013-08-30 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of Large Eddy Simulation (LES) and hybrids is a vibrant research area. This book runs through all the potential unsteady modelling fidelity ranges, from low-order to LES. The latter is probably the highest fidelity for practical aerospace systems modelling. Cutting edge new frontiers are defined. One example of a pressing environmental concern is noise. For the accurate prediction of this, unsteady modelling is needed. Hence computational aeroacoustics is explored. It is also emerging that there is a critical need for coupled simulations. Hence, this area is also considered and the tensions of utilizing such simulations with the already expensive LES. This work has relevance to the general field of CFD and LES and to a wide variety of non-aerospace aerodynamic systems (e.g. cars, submarines, ships, electronics, buildings). Topics treated include unsteady flow techniques; LES and hybrids; general numerical methods; computational aeroacoustics; computational aeroelasticity; coupled simulations and turbulence and its modelling (LES, RANS, transition, VLES, URANS). The volume concludes by pointing forward to future horizons and in particular the industrial use of LES. The writing style is accessible and useful to both academics and industrial practitioners. From the reviews: "Tucker's volume provides a very welcome, concise discussion of current capabilities for simulating and modellng unsteady aerodynamic flows. It covers the various pos sible numerical techniques in good, clear detail and presents a very wide range of practical applications; beautifully illustrated in many cases. This book thus provides a valuable text for practicing engineers, a rich source of background information for students and those new to this area of Research & Development, and an excellent state-of-the-art review for others. A great achievement." Mark Savill FHEA, FRAeS, C.Eng, Professor of Computational Aerodynamics Design & Head of Power & Propulsion Sciences, Department of Power & Propulsion, School of Engineering, Cranfield University, Bedfordshire, U.K. "This is a very useful book with a wide coverage of many aspects in unsteady aerodynamics method development and applications for internal and external flows." L. He, Rolls-Royce/RAEng Chair of Computational Aerothermal Engineering, Oxford University, U.K. "This comprehensive book ranges from classical concepts in both numerical methods and turbulence modelling approaches for the beginner to latest state-of-the-art for the advanced practitioner and constitutes an extremely valuable contribution to the specific Computational Fluid Dynamics literature in Aeronautics. Student and expert alike will benefit greatly by reading it from cover to cover." Sébastien Deck, Onera, Meudon, France

Download or read book Vorticity and Vortex Dynamics written by Jie-Zhi Wu and published by Springer Science & Business Media. This book was released on 2007-04-20 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive and intensive monograph for scientists, engineers and applied mathematicians, as well as graduate students in fluid dynamics. It starts with a brief review of fundamentals of fluid dynamics, with an innovative emphasis on the intrinsic orthogonal decomposition of fluid dynamic process, by which one naturally identifies the content and scope of vorticity and vortex dynamics. This is followed by a detailed presentation of vorticity dynamics as the basis of later development. In vortex dynamics part the book deals with the formation, motion, interaction, stability, and breakdown of various vortices. Typical vortex structures are analyzed in laminar, transitional, and turbulent flows, including stratified and rotational fluids. Physical understanding of vertical flow phenomena and mechanisms is the first priority throughout the book. To make the book self-contained, some mathematical background is briefly presented in the main text, but major prerequisites are systematically given in appendices. Material usually not seen in books on vortex dynamics is included, such as geophysical vortex dynamics, aerodynamic vortical flow diagnostics and management.

Download or read book Scale Invariance written by Annick LESNE and published by Springer Science & Business Media. This book was released on 2011-11-04 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: During a century, from the Van der Waals mean field description (1874) of gases to the introduction of renormalization group (RG techniques 1970), thermodynamics and statistical physics were just unable to account for the incredible universality which was observed in numerous critical phenomena. The great success of RG techniques is not only to solve perfectly this challenge of critical behaviour in thermal transitions but to introduce extremely useful tools in a wide field of daily situations where a system exhibits scale invariance. The introduction of scaling, scale invariance and universality concepts has been a significant turn in modern physics and more generally in natural sciences. Since then, a new "physics of scaling laws and critical exponents", rooted in scaling approaches, allows quantitative descriptions of numerous phenomena, ranging from phase transitions to earthquakes, polymer conformations, heartbeat rhythm, diffusion, interface growth and roughening, DNA sequence, dynamical systems, chaos and turbulence. The chapters are jointly written by an experimentalist and a theorist. This book aims at a pedagogical overview, offering to the students and researchers a thorough conceptual background and a simple account of a wide range of applications. It presents a complete tour of both the formal advances and experimental results associated with the notion of scaling, in physics, chemistry and biology.

Download or read book Advances in Wind Energy Conversion Technology written by Mathew Sathyajith and published by Springer Science & Business Media. This book was released on 2011-04-29 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: With an annual growth rate of over 35%, wind is the fastest growing energy source in the world today. As a result of intensive research and developmental efforts, the technology of generating energy from wind has significantly changed during the past five years. The book brings together all the latest aspects of wind energy conversion technology - right from the wind resource analysis to grid integration of the wind generated electricity. The chapters are contributed by academic and industrial experts having vast experience in these areas. Each chapter begins with an introduction explaining the current status of the technology and proceeds further to the advanced lever to cater for the needs of readers from different subject backgrounds. Extensive bibliography/references appended to each chapter give further guidance to the interested readers.

Download or read book Two Dimensional Separated Flows written by S. M. Belotserkovsky and published by CRC Press. This book was released on 1992-11-30 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two-Dimensional Separated Flows provides a systematic presentation of the theory of separated flow around bodies. The main classes of aerodynamic problems of plane-parallel flow around bodies are described, and the steady aerodynamic, unsteady aerodynamic, and statistical characteristics of a trailing wake are determined. Numerical methods based on the synthesis of models for non-viscous incompressible flow and boundary layer, algorithms, examples, and systematic comparisons are presented. The book also includes numerical results for the problem of separated flow around fixed, oscillating, and rotating cylinders, in addition to results for separated flow around an aerofoil over a wide range of angles. Two-Dimensional Separated Flows will benefit researchers and students studying aerodynamics, aircraft dynamics, aeroelasticity, and the aerodynamics of building structures.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Low Speed Wind Tunnel Testing written by Jewel B. Barlow and published by John Wiley & Sons. This book was released on 1999-02-22 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: A brand-new edition of the classic guide on low-speed wind tunnel testing While great advances in theoretical and computational methods have been made in recent years, low-speed wind tunnel testing remains essential for obtaining the full range of data needed to guide detailed design decisions for many practical engineering problems. This long-awaited Third Edition of William H. Rae, Jr.'s landmark reference brings together essential information on all aspects of low-speed wind tunnel design, analysis, testing, and instrumentation in one easy-to-use resource. Written by authors who are among the most respected wind tunnel engineers in the world, this edition has been updated to address current topics and applications, and includes coverage of digital electronics, new instrumentation, video and photographic methods, pressure-sensitive paint, and liquid crystal-based measurement methods. The book is organized for quick access to topics of interest, and examines basic test techniques and objectives of modeling and testing aircraft designs in low-speed wind tunnels, as well as applications to fluid motion analysis, automobiles, marine vessels, buildings, bridges, and other structures subject to wind loading. Supplemented with real-world examples throughout, Low-Speed Wind Tunnel Testing, Third Edition is an indispensable resource for aerospace engineering students and professionals, engineers and researchers in the automotive industries, wind tunnel designers, architects, and others who need to get the most from low-speed wind tunnel technology and experiments in their work.

Download or read book Geomorphological Fluid Mechanics written by N.J. Balmforth and published by Springer. This book was released on 2008-01-11 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geomorphology deals with some of the most striking patterns of nature. From mountain ranges and mid-ocean ridges to river networks and sand dunes, there is a whole family of forms, structures, and shapes that demand rationalization as well as mathematical description. In the various chapters of this volume, many of these patterns are explored and discussed, and attempts are made to both unravel the reasons for their very existence and to describe their dynamics in quantitative terms. Particular focus is placed on lava and mud flows, ice and snow dynamics, river and coastal morphodynamics and landscape formation. Combining a pedagogical approach with up-to-date reviews of forefront research, this volume will serve both postgraduate students and lecturers in search of advanced textbook material, and experienced researchers wishing to get acquainted with the various physical and mathematical approaches in a range of closely related research fields.

Download or read book Government Reports Announcements Index written by and published by . This book was released on 1988 with total page 1132 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Smart Intelligent Aircraft Structures SARISTU written by Piet Christof Wölcken and published by Springer. This book was released on 2015-09-04 with total page 1025 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book includes the research papers presented in the final conference of the EU funded SARISTU (Smart Intelligent Aircraft Structures) project, held at Moscow, Russia between 19-21 of May 2015. The SARISTU project, which was launched in September 2011, developed and tested a variety of individual applications as well as their combinations. With a strong focus on actual physical integration and subsequent material and structural testing, SARISTU has been responsible for important progress on the route to industrialization of structure integrated functionalities such as Conformal Morphing, Structural Health Monitoring and Nanocomposites. The gap- and edge-free deformation of aerodynamic surfaces known as conformal morphing has gained previously unrealized capabilities such as inherent de-icing, erosion protection and lightning strike protection, while at the same time the technological risk has been greatly reduced. Individual structural health monitoring techniques can now be applied at the part-manufacturing level rather than via extending an aircraft’s time in the final assembly line. And nanocomposites no longer lose their improved properties when trying to upscale from neat resin testing to full laminate testing at element level. As such, this book familiarizes the reader with the most significant develo pments, achievements and key technological steps which have been made possible through the four-year long cooperation of 64 leading entities from 16 different countries with the financial support of the European Commission.

Download or read book Fluid Mechanics for Engineers written by Meinhard T. Schobeiri and published by Springer Science & Business Media. This book was released on 2010-03-27 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contents of this book covers the material required in the Fluid Mechanics Graduate Core Course (MEEN-621) and in Advanced Fluid Mechanics, a Ph. D-level elective course (MEEN-622), both of which I have been teaching at Texas A&M University for the past two decades. While there are numerous undergraduate fluid mechanics texts on the market for engineering students and instructors to choose from, there are only limited texts that comprehensively address the particular needs of graduate engineering fluid mechanics courses. To complement the lecture materials, the instructors more often recommend several texts, each of which treats special topics of fluid mechanics. This circumstance and the need to have a textbook that covers the materials needed in the above courses gave the impetus to provide the graduate engineering community with a coherent textbook that comprehensively addresses their needs for an advanced fluid mechanics text. Although this text book is primarily aimed at mechanical engineering students, it is equally suitable for aerospace engineering, civil engineering, other engineering disciplines, and especially those practicing professionals who perform CFD-simulation on a routine basis and would like to know more about the underlying physics of the commercial codes they use. Furthermore, it is suitable for self study, provided that the reader has a sufficient knowledge of calculus and differential equations. In the past, because of the lack of advanced computational capability, the subject of fluid mechanics was artificially subdivided into inviscid, viscous (laminar, turbulent), incompressible, compressible, subsonic, supersonic and hypersonic flows.