Download or read book Metal Forming and the Finite Element Method written by the late Shiro Kobayashi and published by Oxford University Press. This book was released on 1989-03-09 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of computer-aided design and manufacturing techniques is becoming essential in modern metal-forming technology. Thus process modeling for the determination of deformation mechanics has been a major concern in research . In light of these developments, the finite element method--a technique by which an object is decomposed into pieces and treated as isolated, interacting sections--has steadily assumed increased importance. This volume addresses advances in modern metal-forming technology, computer-aided design and engineering, and the finite element method.
Download or read book Analysis of Sheet Metal Forming Applying the Finite Element Method written by Arkadiusz Bogumil Kedzior and published by . This book was released on 1999 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Forming Analysis written by R. H. Wagoner and published by Cambridge University Press. This book was released on 2001-05-07 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 2001 book describes the most important numerical techniques for simulating metal forming operations.
Download or read book Analysis of Sheet Metal Forming by the Finite element Method written by Jae-Hak Kim and published by . This book was released on 1977 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanics of Sheet Metal Forming written by D. Koistinen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume records the proceedings of an international symposium on "ME CHANICS OF SHEET METAL FORMING: Material Behavior and Deformation Analysis." It was sponsored and held at the General Motors Research Labora tories on October 17-18, 1977. This symposium was the twenty-first in an annual series. The objective of this symposium was to discuss the research frontiers in experimental and theoretical methods of sheet metal forming analysis and, also, to determine directions of future research to advance technology that would be useful in metal stamping plants. Metal deformation analyses which provide guide lines for metal flanging are already in use. Moreover, recent advances in computer techniques for solving plastic flow equations and in measurements of material parameters are leading to dynamic models of many stamping operations. These models would accurately predict the stresses and strains in the sheet as a function of punch travel. They would provide the engineer with the knowledge he needs to improve die designs. The symposium papers were organized into five sessions: the state of the art, constitutive relations of sheet metal, role of friction, sheet metal formability, and deformation analysis of stamping operations. We believe this volume not only summarizes the various viewpoints at the time of the symposium, but also pro vides an outlook for materials and mechanics research in the future.
Download or read book Metal Forming and the Finite element Method written by and published by . This book was released on 1989 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Metal Forming written by Henry S. Valberg and published by Cambridge University Press. This book was released on 2010-03-31 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Metal Forming: Including FEM Analysis describes metal forming theory and how experimental techniques can be used to study any metal forming operation with great accuracy. For each primary class of processes, such as forging, rolling, extrusion, wiredrawing, and sheet-metal forming, it explains how FEA (Finite Element Analysis) can be applied with great precision to characterize the forming condition and in this way optimize the processes. FEA has made it possible to build very realistic FEM-models of any metal forming process, including complex three-dimensional forming operations, in which complex products are shaped by complex dies. Thus, using FEA it is now possible to visualize any metal forming process and to study strain, stresses, and other forming conditions inside the parts being manufactured as they develop throughout the process.
Download or read book Simulation of Metal Forming Processes by the Finite Element Method SIMOP I written by Kurt Lange and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Finite Element Analysis of the Sheet Metal Forming Process written by Ronan Philip Cronin and published by . This book was released on 1994 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Metal Forming written by Henry S. Valberg and published by Cambridge University Press. This book was released on 2010-03-31 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: A professional reference for advanced courses in two of the most common manufacturing processes: metal forming and metal cutting.
Download or read book Analysis and Optimization of Sheet Metal Forming Processes written by Amrut Mulay and published by CRC Press. This book was released on 2024-06-13 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis and Optimization of Sheet Metal Forming Processes comprehensively covers sheet metal forming, from choosing materials, tools and the forming method to optimising the entire process through finite element analysis and computer-aided engineering. Beginning with an introduction to sheet metal forming, the book provides a guide to the various techniques used within the industry. It provides a discussion of sheet metal properties relevant to forming processes, such as ductility, formability, and strength, and analyses how materials should be selected with factors including material properties, cost, and availability. Forming processes including shearing, bending, deep drawing, and stamping are also discussed, along with tools such as dies, punches, and moulds. Simulation and modelling are key to optimising the sheet metal forming process, including finite element analysis and computer-aided engineering. Other topics included are quality control, design, industry applications, and future trends. The book will be of interest to students and professionals working in the field of sheet metal and metal forming, materials science, mechanical engineering, and metallurgy.
Download or read book Modelling and Simulation of Sheet Metal Forming Processes written by Marta C. Oliveira and published by MDPI. This book was released on 2020-04-22 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: The numerical simulation of sheet metal forming processes has become an indispensable tool for the design of components and their forming processes. This role was attained due to the huge impact in reducing time to market and the cost of developing new components in industries ranging from automotive to packing, as well as enabling an improved understanding of the deformation mechanisms and their interaction with process parameters. Despite being a consolidated tool, its potential for application continues to be discovered with the continuous need to simulate more complex processes, including the integration of the various processes involved in the production of a sheet metal component and the analysis of in-service behavior. The quest for more robust and sustainable processes has also changed its deterministic character into stochastic to be able to consider the scatter in mechanical properties induced by previous manufacturing processes. Faced with these challenges, this Special Issue presents scientific advances in the development of numerical tools that improve the prediction results for conventional forming process, enable the development of new forming processes, or contribute to the integration of several manufacturing processes, highlighting the growing multidisciplinary characteristic of this field.
Download or read book Finite Element Plasticity and Metalforming Analysis written by G. W. Rowe and published by Cambridge University Press. This book was released on 1991-03-07 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes a computer-based technique for aiding metal-forming processes, and so enable tool and product designers to reduce development lead times for the introduction of new products and help improve the quality and reliability of products.
Download or read book Sheet Metal Forming Processes written by Dorel Banabic and published by Springer Science & Business Media. This book was released on 2010-06-21 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concept of virtual manufacturing has been developed in order to increase the industrial performances, being one of the most ef cient ways of reducing the m- ufacturing times and improving the quality of the products. Numerical simulation of metal forming processes, as a component of the virtual manufacturing process, has a very important contribution to the reduction of the lead time. The nite element method is currently the most widely used numerical procedure for s- ulating sheet metal forming processes. The accuracy of the simulation programs used in industry is in uenced by the constitutive models and the forming limit curves models incorporated in their structure. From the above discussion, we can distinguish a very strong connection between virtual manufacturing as a general concept, ?nite element method as a numerical analysis instrument and constitutive laws,aswellas forming limit curves as a speci city of the sheet metal forming processes. Consequently, the material modeling is strategic when models of reality have to be built. The book gives a synthetic presentation of the research performed in the eld of sheet metal forming simulation during more than 20 years by the members of three international teams: the Research Centre on Sheet Metal Forming—CERTETA (Technical University of Cluj-Napoca, Romania); AutoForm Company from Zürich, Switzerland and VOLVO automotive company from Sweden. The rst chapter presents an overview of different Finite Element (FE) formu- tions used for sheet metal forming simulation, now and in the past.
Download or read book Modelling of Metal Forming Processes written by J.L. Chenot and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: The physical modelling of metal forming processes has been widely used both in University and in Industry for many years. Relatively simple numerical models, such as the Slab Method and the Upper Bound Method, were first used and many such models are implemented in the industry for practical design or regulation of forming processes. These are also under investigation in the University, mainly for treat models ments which require low cost calculations or very fast answers for on-line integration. More recently, sophisticated numerical methods have been used for the simulation of metal flow during forming operations. Since the early works in 1973 and 1974, mainly in U. K. and U. S. A. , the applications of the finite element method to metal processing have been developed in many laboratories all over the world. Now the numerical approach seems to be widely re cognized as a powerful tool for comprehension oriented studies, for predic ting the main technological parameters, and for the design and the optlmi zation of new forming sequences. There is also a very recent trend for the introduction of physical laws in the thermo-mechanical models, in order to predict the local evolution of internal variable representing the micro structure of the metal. To day more and more practicians of the Industry are asking for compu ter models for design of their forming processes.
Download or read book Theories Methods and Numerical Technology of Sheet Metal Cold and Hot Forming written by Ping Hu and published by Springer Science & Business Media. This book was released on 2012-07-23 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last 15 years, the application of innovative steel concepts in the automotive industry has increased steadily. Numerical simulation technology of hot forming of high-strength steel allows engineers to modify the formability of hot forming steel metals and to optimize die design schemes. Theories, Methods and Numerical Technology of Sheet Metal Cold and Hot Forming focuses on hot and cold forming theories, numerical methods, relative simulation and experiment techniques for high-strength steel forming and die design in the automobile industry. Theories, Methods and Numerical Technology of Sheet Metal Cold and Hot Forming introduces the general theories of cold forming, then expands upon advanced hot forming theories and simulation methods, including: the forming process, constitutive equations, hot boundary constraint treatment, and hot forming equipment and experiments. Various calculation methods of cold and hot forming, based on the authors’ experience in commercial CAE software for sheet metal forming, are provided, as well as a discussion of key issues, such as hot formability with quenching process, die design and cooling channel design in die, and formability experiments. Theories, Methods and Numerical Technology of Sheet Metal Cold and Hot Forming will enable readers to develop an advanced knowledge of hot forming, as well as to apply hot forming theories, calculation methods and key techniques to direct their die design. It is therefore a useful reference for students and researchers, as well as automotive engineers.
Download or read book Validation of Finite Element Analysis in Sheet Metal Forming Processes written by Sreekanth G. Teeparthi and published by . This book was released on 1999 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:
