Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thougtit that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 31 (thesis year 1986) a total of 11 ,480 theses titles trom 24 Canadian and 182 United States universities. We are sure that this broader base tor these titles reported will greatly enhance the value ot this important annual reterence work. While Volume 31 reports theses submitted in 1986, on occasion, certain univer sities do re port theses submitted in previousyears but not reported at the time.

Download or read book Material Science and Environmental Engineering written by Ping Chen and published by CRC Press. This book was released on 2015-12-30 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt: Material Science and Environmental Engineering presents novel and fundamental advances in the fields of material science and environmental engineering. Collecting the comprehensive and state-of-art in these fields, the contributions provide a broad overview of the latest research results, so that it will proof to be a valuable reference book to aca

Download or read book Structural Hot Spot Stress Approach to Fatigue Analysis of Welded Components written by Erkki Niemi and published by Springer. This book was released on 2017-08-28 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides background and guidance on the use of the structural hot-spot stress approach to fatigue analysis. The book also offers Design S-N curves for use with the structural hot-spot stress for a range of weld details, and presents parametric formulas for calculating stress increases due to misalignment and structural discontinuities. Highlighting the extension to structures fabricated from plates and non-tubular sections. The structural hot-spot stress approach focuses on cases of potential fatigue cracking from the weld toe and it has been in use for many years in tubular joints. Following an explanation of the structural hot-spot stress, its definition and its relevance to fatigue, the book describes methods for its determination. It considers stress determination from both finite element analysis and strain gauge measurements, and emphasizes the use of finite element stress analysis, providing guidance on the choice of element type and size for use with either solid or shell elements. Lastly, it illustrates the use of the recommendations in four case studies involving the fatigue assessment of welded structures using the structural hot-spot stress

Download or read book Computational Welding Mechanics written by John A. Goldak and published by Springer Science & Business Media. This book was released on 2006-07-04 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Welding Mechanics (CWM) provides readers with a complete introduction to the principles and applications of computational welding including coverage of the methods engineers and designers are using in computational welding mechanics to predict distortion and residual stress in welded structures, thereby creating safer, more reliable and lower cost structures. Drawing upon years of practical experience and the study of computational welding mechanics the authors instruct the reader how to: - understand and interpret computer simulation and virtual welding techniques including an in depth analysis of heat flow during welding, microstructure evolution and distortion analysis and fracture of welded structures, - relate CWM to the processes of design, build, inspect, regulate, operate and maintain welded structures, - apply computational welding mechanics to industries such as ship building, natural gas and automobile manufacturing. Ideally suited for practicing engineers and engineering students, Computational Welding Mechanics is a must-have book for understanding welded structures and recent technological advances in welding, and it provides a unified summary of recent research results contributed by other researchers.

Download or read book Metals Abstracts written by and published by . This book was released on 1996 with total page 1622 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design and Analysis of Fatigue Resistant Welded Structures written by Dieter Radaj and published by Woodhead Publishing. This book was released on 1990-01-03 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: An English version of a sucessful German book. Both traditional and modern concepts are described.

Download or read book IIW Recommendations for the Fatigue Assessment of Welded Structures By Notch Stress Analysis written by W Fricke and published by Woodhead Publishing. This book was released on 2012-10-22 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: The notch stress approach for fatigue assessment of welded joints is based on the highest elastic stress at the weld toe or root. In order to avoid arbitrary or infinite stress results, a rounded shape with a reference radius instead of the actual sharp toe or root is usually assumed. IIW recommendations for the fatigue assessment of welded structures by notch stress analysis reviews different proposals for reference radii together with associated S-N curves. Detailed recommendations are given for the numerical analysis of notch stress by the finite or boundary element method. Several aspects are discussed, such as the structural weakening by keyhole-shaped notches and the consideration of multiaxial stress states. Appropriate S-N curves are presented for the assessment of the fatigue strength of different materials. Finally, four examples illustrate the application of the approach as well as the variety of structures which can be analysed and the range of results that can be obtained from different models. Provides detailed recommendations for the number analysis of notch stress by the finite or boundary element method Discusses structural weakening by keyhole-shaped notches and the consideration of multiaxial stress states Provides four comprehensive examples, illustrating the variety of structures which can be analysed and the range of results that can be obtained from different models

Download or read book Fatigue Design ESIS 16 written by J. Solin and published by Wiley-Blackwell. This book was released on 1993-03-02 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of research in fatigue design, prediction, and assessment Fatigue Design is a collection of research presented at the 1993 International Symposium on Fatigue Design. Detailing the latest findings and most current research, this book features papers on a variety of pertinent topics, including the quantification of service load for fatigue life predictions, identification of stress states and failure modes, assessment of residual life in damaged components, and more. Special attention is paid to the need for simple and reliable prediction tools to help better ensure adequate strength at the design stage.

Download or read book Progress in the Analysis and Design of Marine Structures written by Carlos Guedes Soares and published by CRC Press. This book was released on 2017-04-28 with total page 2192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in the Analysis and Design of Marine Structures collects the contributions presented at MARSTRUCT 2017, the 6th International Conference on Marine Structures (Lisbon, Portugal, 8-10 May 2017). The MARSTRUCT series of Conferences started in Glasgow, UK in 2007, the second event of the series having taken place in Lisbon, Portugal in March 2009, the third in Hamburg, Germany in March 2011, the fourth in Espoo, Finland in March 2013, and the fifth in Southampton, UK in March 2015. This Conference series deals with Ship and Offshore Structures, addressing topics in the areas of: - Methods and Tools for Loads and Load Effects - Methods and Tools for Strength Assessment - Experimental Analysis of Structures - Materials and Fabrication of Structures - Methods and Tools for Structural Design and Optimisation, and - Structural Reliability, Safety and Environmental Protection Progress in the Analysis and Design of Marine Structures is essential reading for academics, engineers and all professionals involved in the design of marine and offshore structures.

Download or read book Recommendations for Fatigue Design of Welded Joints and Components written by A. F. Hobbacher and published by Springer. This book was released on 2015-12-23 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a basis for the design and analysis of welded components that are subjected to fluctuating forces, to avoid failure by fatigue. It is also a valuable resource for those on boards or commissions who are establishing fatigue design codes. For maximum benefit, readers should already have a working knowledge of the basics of fatigue and fracture mechanics. The purpose of designing a structure taking into consideration the limit state for fatigue damage is to ensure that the performance is satisfactory during the design life and that the survival probability is acceptable. The latter is achieved by the use of appropriate partial safety factors. This document has been prepared as the result of an initiative by Commissions XIII and XV of the International Institute of Welding (IIW).

Download or read book Fatigue Assessment of Welded Joints by Local Approaches written by Dieter Radaj and published by Woodhead Publishing. This book was released on 2006-10-30 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: Local approaches to fatigue assessment are used to predict the structural durability of welded joints, to optimise their design and to evaluate unforeseen joint failures. This standard work provides a systematic survey of the principles and practical applications of the various methods. It covers the hot spot structural stress approach to fatigue in general, the notch stress and notch strain approach to crack initiation and the fracture mechanics approach to crack propagation. Seam-welded and spot-welded joints in structural steels and aluminium alloys are also considered.This completely reworked second edition takes into account the tremendous progress in understanding and applying local approaches which has been achieved in the last decade. It is a standard reference for designers, structural analysts and testing engineers who are responsible for the fatigue-resistant in-service behaviour of welded structures. - Completely reworked second edition of a standard work providing a systematic survey of the principles and practical applications of the various methods - Covers the hot spot structural stress approach to fatigue in general, the notch stress and notch strain approach to crack initiation and the fracture mechanics approach to crack propagation. - Written by a distinguished team of authors

Download or read book Environmental Load Factors and System Strength Evaluation of Offshore Jacket Platforms written by Zafarullah Nizamani and published by Springer. This book was released on 2015-01-27 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a study for the determination of environmental load factors for Jacket Platforms in Malaysia and a methodology to determine the life extension of aging platforms. The simplified methods described here could be used for determining not only structural reliability but also safety factors. Its content is particularly interesting to design and maintenance engineers who are working in offshore or onshore industry.

Download or read book Rules of Thumb for Mechanical Engineers written by J. Edward Pope and published by Gulf Professional Publishing. This book was released on 1997 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluids -- Heat transfer -- Thermodynamics -- Mechanical seals -- Pumps and compressors -- Drivers -- Gears -- Bearings -- Piping and pressure vessels -- Tribology -- Vibration -- Materials -- Stress and strain -- Fatigue -- Instrumentation -- Engineering economics.

Download or read book Fatigue Design of Marine Structures written by Inge Lotsberg and published by Cambridge University Press. This book was released on 2016-04-13 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue Design of Marine Structures provides students and professionals with a theoretical and practical background for fatigue design of marine structures including sailing ships, offshore structures for oil and gas production, and other welded structures subject to dynamic loading such as wind turbine structures. Industry expert Inge Lotsberg brings more than forty years of experience in design and standards-setting to this comprehensive guide to the basics of fatigue design of welded structures. Topics covered include laboratory testing, S-N data, different materials, different environments, stress concentrations, residual stresses, acceptance criteria, non-destructive testing, improvement methods, probability of failure, bolted connections, grouted connections, and fracture mechanics. Featuring twenty chapters, three hundred diagrams, forty-seven example calculations, and resources for further study, Fatigue Design of Marine Structures is intended as the complete reference work for study and practice.

Download or read book Corrosion Control for Offshore Structures written by Ramesh Singh and published by Gulf Professional Publishing. This book was released on 2014-08-12 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: A variable game changer for those companies operating in hostile, corrosive marine environments, Corrosion Control for Offshore Structures provides critical corrosion control tips and techniques that will prolong structural life while saving millions in cost. In this book, Ramesh Singh explains the ABCs of prolonging structural life of platforms and pipelines while reducing cost and decreasing the risk of failure. Corrosion Control for Offshore Structures places major emphasis on the popular use of cathodic protection (CP) combined with high efficiency coating to prevent subsea corrosion. This reference begins with the fundamental science of corrosion and structures and then moves on to cover more advanced topics such as cathodic protection, coating as corrosion prevention using mill applied coatings, field applications, and the advantages and limitations of some common coating systems. In addition, the author provides expert insight on a number of NACE and DNV standards and recommended practices as well as ISO and Standard and Test Methods. Packed with tables, charts and case studies, Corrosion Control for Offshore Structures is a valuable guide to offshore corrosion control both in terms of its theory and application. - Prolong the structural life of your offshore platforms and pipelines - Understand critical topics such as cathodic protection and coating as corrosion prevention with mill applied coatings - Gain expert insight on a number of NACE and DNV standards and recommended practices as well as ISO and Standard Test Methods.

Download or read book Fatigue of Welded Structures written by Timothy Russell Gurney and published by CUP Archive. This book was released on 1979-12-20 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Piping and Pipeline Calculations Manual written by Philip Ellenberger and published by Elsevier. This book was released on 2014-01-22 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piping and Pipeline Calculations Manual, Second Edition provides engineers and designers with a quick reference guide to calculations, codes, and standards applicable to piping systems. The book considers in one handy reference the multitude of pipes, flanges, supports, gaskets, bolts, valves, strainers, flexibles, and expansion joints that make up these often complex systems. It uses hundreds of calculations and examples based on the author's 40 years of experiences as both an engineer and instructor. Each example demonstrates how the code and standard has been correctly and incorrectly applied. Aside from advising on the intent of codes and standards, the book provides advice on compliance. Readers will come away with a clear understanding of how piping systems fail and what the code requires the designer, manufacturer, fabricator, supplier, erector, examiner, inspector, and owner to do to prevent such failures. The book enhances participants' understanding and application of the spirit of the code or standard and form a plan for compliance. The book covers American Water Works Association standards where they are applicable. - Updates to major codes and standards such as ASME B31.1 and B31.12 - New methods for calculating stress intensification factor (SIF) and seismic activities - Risk-based analysis based on API 579, and B31-G - Covers the Pipeline Safety Act and the creation of PhMSA