Download or read book Analysis of Heat Transfer in Subcooled Metal Powder Subjected to Pulsed Laser Heating written by Chad E. Konrad and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The interaction of metal powder and pulsed laser heat flux is investigated on two levels, the powder bed level and the particle level. The locations of the thermal penetration depth and the liquid-solid interface are obtained using the integral approximate method. Melting and resolidification of a subcooled, two-component metal powder bed subjected to temporal Gaussian heat flux is investigated analytically. An increase in heat source intensity or powder bed porosity will result in an increase of the melt pool depth, melt pool temperature, and the overall processing time. The melt pool becomes shallower with increasing subcooling. Heat conduction in a single subcooled metal powder particle subjected to nanosecond pulsed laser heating is also investigated analytically. A change in the repetition rate of the laser or an increase in maximum heat flux will result in a larger temperature rise on the surface of the particle, as well as a higher thermalized particle temperature after the laser pulse is finished. Although a discrepancy exists where peak surface temperatures are concerned, the thermalized temperatures of different-sized spheres are all the same. The time at which the particle is fully penetrated is only affected by a change in thermal diffusivity, laser pulse width, or particle radius. The physical model and results of this investigation pave the way for further modeling of Selective Laser Sintering (SLS) processes with a pulsed laser.
Download or read book Advanced Manufacturing Techniques Using Laser Material Processing written by Akinlabi, Esther Titilayo and published by IGI Global. This book was released on 2016-04-14 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of lasers in material processing has become a useful method for transforming industrial materials into finished products. The benefits of laser material processing are vast, including increased precision, high processing speed, and dustless cutting and drilling. Advanced Manufacturing Techniques Using Laser Material Processing explores the latest methodologies for using lasers in materials manufacturing and production, the benefits of using lasers in industrial settings, as well as future outlooks for this technology. This innovative publication is an essential reference source for professionals, researchers, and graduate-level students studying manufacturing technologies and industrial engineering.
Download or read book Fiber Laser written by Mukul Paul and published by BoD – Books on Demand. This book was released on 2016-03-02 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a self-contained collection of scholarly papers targeting an audience of practicing researchers, academics, PhD students, and other scientists. This book describes the rapidly developing field of fiber laser technology filling the very important role of providing students, researchers, and technology managers with valuable, timely, and unbiased information on the subject. The objective of this book is to highlight recent progress and trends in fiber laser technology covering a wide range of topics, such as self-pulsing phenomena in high-power continuous wave (CW) Yb-doped fiber lasers, Q-switched fiber laser, mode-locked fiber laser using carbon nanotubes (CNT), properties of double-scale pulses in mode-locked fiber laser, Brillouin fiber laser, dual-wave length fiber laser (DWFL) for microwave (MHz) and terahertz (THz) radiation generation, tunable fiber laser based on twin core optical fiber, reflective semiconductor optical amplifier (RSOA)-based fiber laser, dissipative soliton phenomena in fiber lasers, noiselike pulses (NLPs) in Yb-doped fiber laser, ultra fast fiber laser, numerical simulation in Q-switched and mode-locked fiber laser, gain saturation in optical fiber laser amplifiers, heat generation and removal in fiber lasers, and different fiber laser based technologies for material processing. We hope that this book will be useful for students, researchers, and professionals, who work with fiber lasers. This book will also serve as an interesting and valuable reference that will impact, stimulate, and promote further advances in the area of fiber lasers
Download or read book Journal of Thermophysics and Heat Transfer written by and published by . This book was released on 2006 with total page 996 pages. Available in PDF, EPUB and Kindle. Book excerpt: This journal is devoted to the advancement of the science and technology of thermophysics and heat transfer through the dissemination of original research papers disclosing new technical knowledge and exploratory developments and applications based on new knowledge. It publishes papers that deal with the properties and mechanisms involved in thermal energy transfer and storage in gases, liquids, and solids or combinations thereof. These studies include conductive, convective, and radiative modes alone or in combination and the effects of the environment.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1989 with total page 1134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1993 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Additive Manufacturing of High Performance Materials written by Dongdong Gu and published by Springer. This book was released on 2015-04-21 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book entitled “Laser Additive Manufacturing of High-Performance Materials” covers the specific aspects of laser additive manufacturing of high-performance new materials components based on an unconventional materials incremental manufacturing philosophy, in terms of materials design and preparation, process control and optimization and theories of physical and chemical metallurgy. This book describes the capabilities and characteristics of the development of new metallic materials components by laser additive manufacturing process, including nanostructured materials, in situ composite materials, particle reinforced metal matrix composites, etc. The topics presented in this book, similar as laser additive manufacturing technology itself, show a significant interdisciplinary feature, integrating laser technology, materials science, metallurgical engineering and mechanical engineering. This is a book for researchers, students, practicing engineers and manufacturing industry professionals interested in laser additive manufacturing and laser materials processing. Dongdong Gu is a Professor at College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics (NUAA), PR China.
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1969 with total page 1178 pages. Available in PDF, EPUB and Kindle. Book excerpt: NSA is a comprehensive collection of international nuclear science and technology literature for the period 1948 through 1976, pre-dating the prestigious INIS database, which began in 1970. NSA existed as a printed product (Volumes 1-33) initially, created by DOE's predecessor, the U.S. Atomic Energy Commission (AEC). NSA includes citations to scientific and technical reports from the AEC, the U.S. Energy Research and Development Administration and its contractors, plus other agencies and international organizations, universities, and industrial and research organizations. References to books, conference proceedings, papers, patents, dissertations, engineering drawings, and journal articles from worldwide sources are also included. Abstracts and full text are provided if available.
Download or read book Analysis Of Heat And Mass Transfer written by Ernst Rudolf Georg Eckert and published by CRC Press. This book was released on 1986-03-01 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optical Measurements written by Franz Mayinger and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasing possibilities of computer-aided data processing have caused a new revival of optical techniques in many areas of mechanical and chemical en gineering. Optical methods have a long tradition in heat and mass transfer and in fluid dynamics. Global experimental information is not sufficient for developing constitution equations to describe complicated phenomena in fluid dynamics or in transfer processes by a computer program . Furthermore, a detailed insight with high local and temporal resolution into the thermo-and fluiddynamic situations is necessary. Sets of equations for computer program in thermo dynamics and fluid dynamics usually consist of two types of formulations: a first one derived from the conservation laws for mass, energy and momentum, and a second one mathematically modelling transport processes like laminar or turbulent diffusion. For reliably predicting the heat transfer, for example, the velocity and temperature field in the boundary layer must be known, or a physically realistic and widely valid correlation describing the turbulence must be avail able. For a better understanding of combustion processes it is necessary to know the local concentration and temperature just ahead of the flame and in the ignition zone.
Download or read book Thermal Systems written by Ivan CK Tam and published by MDPI. This book was released on 2021-04-07 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: We live in interesting times in which life as we know it is being threatened by manmade changes to the atmosphere in which we live. On the global scale, concern is focused on climate change due to greenhouse gas emissions, and on a national scale, atmospheric pollution produced by combustion processes is of concern. A possible approach is through the development of new ideas and innovative processes to the current practices. Among the available options, multi-generation processes such as the trigeneration cycle, battery storage system, solar power plants and heat pumps have been widely studied, as they potentially allow for greater efficiency, lower costs, and reduced emissions. On the other hand, some researchers had been working to increase the potential of energy generation process through heat recovery under the steam generator, organic Rankine cycle, and absorption chillers. In this Special Issue on "Thermal Systems” of fundamental or applied and numerical or experimental investigation, many new concepts in thermal systems and energy utilization were explored and published as original research papers in this “Special Issue”.
Download or read book Laser Heating of Metals written by A. M. Prokhorov and published by CRC Press. This book was released on 2018-01-31 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to ensure efficient use of lasers, and for any large-scale implementation, a thorough knowledge of the fundamental laws governing the interaction of radiation with matter is required. Laser Heating of Metals provides a systematic and comprehensive presentation of the fundamental principles underlying the physical and chemical mechanisms governing the interaction of laser radiation with solid targets, and in particular metals in gaseous environments, for a wide range of beam parameters. The authors have been active in the field of interactions between lasers and materials for many years, and this book summarises the results of their work, in particular concerning the action of CO2 lasers on metals. These results are then discussed at some length. Laser Heating of Materials will be of interest to scientists at all levels with an interest in the interaction of radiation with condensed matter, and in particular to those involved in laser cutting and welding etc, and metal-working.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1996 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hot Embossing written by Matthias Worgull and published by William Andrew. This book was released on 2009-09-28 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an overview of replication technology for micro- and nanostructures, focusing on the techniques and technology of hot embossing, a scaleable and multi-purpose technology for the manufacture of devices such as BioMEMS and microfluidic devices which are expected to revolutionize a wide range of medical and industrial processes over the coming decade.The hot embossing process for replicating microstructures was developed by the Forschungszentrum Karlsruhe (Karlsruhe Institute of Technology) where the author is head of the Nanoreplication Group. Worgull fills a gap in existing information by fully detailing the technology and techniques of hot embossing. He also covers nanoimprinting, a process related to hot embossing, with examples of actual research topics and new applications in nanoreplication. A practical and theoretical guide to selecting the materials, machinery and processes involved in microreplication using hot embossing techniques Compares different replication processes such as: micro injection molding, micro thermoforming, micro hot embossing, and nanoimprinting Details commercially available hot embossing machinery and components like tools and mold inserts
Download or read book Additive Manufacturing of Metals The Technology Materials Design and Production written by Li Yang and published by Springer. This book was released on 2017-05-11 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a unique guide to the three-dimensional (3D) printing of metals. It covers various aspects of additive, subtractive, and joining processes used to form three-dimensional parts with applications ranging from prototyping to production. Examining a variety of manufacturing technologies and their ability to produce both prototypes and functional production-quality parts, the individual chapters address metal components and discuss some of the important research challenges associated with the use of these technologies. As well as exploring the latest technologies currently under development, the book features unique sections on electron beam melting technology, material lifting, and the importance this science has in the engineering context. Presenting unique real-life case studies from industry, this book is also the first to offer the perspective of engineers who work in the field of aerospace and transportation systems, and who design components and manufacturing networks. Written by the leading experts in this field at universities and in industry, it provides a comprehensive textbook for students and an invaluable guide for practitioners
Download or read book Heat Transfer written by Miguel Araiz and published by BoD – Books on Demand. This book was released on 2021-09-22 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal energy is present in all aspects of our lives, including when cooking, driving, or turning on the heat or air conditioning. Sometimes this thermal management is not evident, but it is essential for our comfort and lifestyle. In addition, heat transfer is vital in many industrial processes. Thermal energy analysis is a complex task that usually requires different approaches. With five sections, this book provides information on heat transfer problems and using experimental techniques and computational models to analyse them.
Download or read book Fundamentals of Rocket Propulsion written by DP Mishra and published by CRC Press. This book was released on 2017-07-20 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book follows a unified approach to present the basic principles of rocket propulsion in concise and lucid form. This textbook comprises of ten chapters ranging from brief introduction and elements of rocket propulsion, aerothermodynamics to solid, liquid and hybrid propellant rocket engines with chapter on electrical propulsion. Worked out examples are also provided at the end of chapter for understanding uncertainty analysis. This book is designed and developed as an introductory text on the fundamental aspects of rocket propulsion for both undergraduate and graduate students. It is also aimed towards practicing engineers in the field of space engineering. This comprehensive guide also provides adequate problems for audience to understand intricate aspects of rocket propulsion enabling them to design and develop rocket engines for peaceful purposes.
