Download or read book Micromixers written by Nam-Trung Nguyen and published by William Andrew. This book was released on 2011-09-17 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability to mix minute quantities of fluids is critical in a range of recent and emerging techniques in engineering, chemistry and life sciences, with applications as diverse as inkjet printing, pharmaceutical manufacturing, specialty and hazardous chemical manufacturing, DNA analysis and disease diagnosis.The multidisciplinary nature of this field – intersecting engineering, physics, chemistry, biology, microtechnology and biotechnology – means that the community of engineers and scientists now engaged in developing microfluidic devices has entered the field from a variety of different backgrounds.Micromixers is uniquely comprehensive, in that it deals not only with the problems that are directly related to fluidics as a discipline (aspects such as mass transport, molecular diffusion, electrokinetic phenomena, flow instabilities, etc.) but also with the practical issues of fabricating micomixers and building them into microsystems and lab-on-chip assemblies.With practical applications to the design of systems vital in modern communications, medicine and industry this book has already established itself as a key reference in an emerging and important field.The 2e includes coverage of a broader range of fabrication techniques, additional examples of fully realized devices for each type of micromixer and a substantially extended section on industrial applications, including recent and emerging applications. - Introduces the design and applications of micromixers for a broad audience across chemical engineering, electronics and the life sciences, and applications as diverse as lab-on-a-chip, ink jet printing, pharmaceutical manufacturing and DNA analysis - Helps engineers and scientists to unlock the potential of micromixers by explaining both the scientific (microfluidics) aspects and the engineering involved in building and using successful microscale systems and devices with micromixers - The author's applied approach combines experience-based discussion of the challenges and pitfalls of using micromixers, with proposals for how to overcome them

Download or read book Analysis Design and Fabrication of Micromixers written by Kwang-Yong Kim and published by Mdpi AG. This book was released on 2021-09-23 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes an editorial and 12 research papers on micromixers collected from the Special Issue published in Micromachines. The topics of the papers are focused on the design of micromixers, their fabrication, and their analysis. Some of them proposed novel micromixer designs. Most of them deal with passive micromixers, but two papers report studies on electrokinetic micromixers. Fully three-dimensional (3D) micromixers were investigated in some cases. One of the papers applied optimization techniques to the design of a 3D micromixer. A review paper is also included and reports a review of recently developed passive micromixers and a comparative analysis of 10 typical micromixers.

Download or read book Analysis Design and Fabrication of Micromixers Volume II written by Kwang-Yong Kim and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromixers are an important component in micrototal analysis systems and lab-on-a-chip platforms which are widely used for sample preparation and analysis, drug delivery, and biological and chemical synthesis. The Special Issue "Analysis, Design and Fabrication of Micromixers II" published in Micromachines covers new mechanisms, numerical and/or experimental mixing analysis, design, and fabrication of various micromixers. This reprint includes an editorial, two review papers, and eleven research papers reporting on five active and six passive micromixers. Three of the active micromixers have electrokinetic driving force, but the other two are activated by mechanical mechanism and acoustic streaming. Three studies employs non-Newtonian working fluids, one of which deals with nano-non-Newtonian fluids. Most of the cases investigated micromixer design.

Download or read book Design and Fabrication of Micro Mixer for Analysis of Nanoparticles written by Abhijit Potnis and published by . This book was released on 2005 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Passive Micromixers written by Mubashshir Ansari A. (Ed.) and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analysis and Design Optimization of Micromixers written by Arshad Afzal and published by Springer Nature. This book was released on 2020-12-07 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book illustrates the computational framework based on knowledge of flow and mass transfer together with optimization techniques to solve problems relevant to micromixing technology. The authors provide a detailed analysis of the different numerical techniques applied to the design of micromixers. Flow and mixing analysis is based on both the Eulerian and Lagrangian approaches; relative advantages and disadvantages of the two methods and suitability to different types of mixing problems are analysed. The book also discusses the various facets of numerical schemes subjected to discretization errors and computational grid requirements. Since a large number of studies are based on commercial computational fluid dynamics (CFD) packages, relevant details of these packages to the mixing problem using them are presented. Numerical optimization techniques coupled with CFD analysis of flow and mixing have proved to be an important tool for micromixers design, and therefore, are an important part of the book. These techniques are presented briefly, and focus is on surrogate modeling and optimization applied to design of micromixers.

Download or read book Passive Micromixers written by Kwang-Yong Kim and published by MDPI. This book was released on 2018-08-20 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue " Passive Micromixers" that was published in Micromachines

Download or read book Micromixers written by Nam-Trung Nguyen and published by William Andrew. This book was released on 2011-10-20 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction -- Fundamentals of Mass Transport in Micro Scale -- Fabrication Technologies -- Micromixers Based on Molecular Diffusion -- Micromixers Based on Chaotic Advection -- Active Micromixers -- Characterization Techniques -- Applications of Micromixers.

Download or read book Design Fabrication and Test of Chaotic Micromixers Hydrogel Microvalves and PH Regulation Systems written by Hui Liu and published by . This book was released on 2001 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Micro and Macro Mixing written by Henning Bockhorn and published by Springer Science & Business Media. This book was released on 2009-12-26 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: The homogenization of single phase gases or liquids with chemical reactive components by mixing belongs to one of the oldest basic operations applied in chemical engineering. The mixing process is used as an essential step in nearly all processes of the chemical industry as well as the pharmaceutical and food ind- tries. Recent experimentally and theoretically based results from research work lead to a fairly good prediction of the velocity fields in differend kinds of mixers, where as predictions of simultaneously proceeding homogeneous chemical re- tions, are still not reliable in a similar way. Therefore the design of equipment for mixing processes is still derived from measurements of the so called “mixing time” which is related to the applied methods of measurement and the special - sign of the test equipment itself. The cooperation of 17 research groups was stimulated by improved modern methods for experimental research and visualization, for simulations and nume- cal calculations of mixing and chemical reactions in micro and macro scale of time and local coordinates. The research work was financed for a six years period within the recently finished Priority Program of the German Research Foundation (DFG) named “Analysis, modeling and numerical prediction of flow-mixig with and without chemical reactions (SPP 1141)”. The objective of the investigations was to improve the prediction of efficiencies and selectivities of chemical re- tions on macroscopic scale.

Download or read book Micro Nano Manufacturing written by Hans Nørgaard Hansen and published by MDPI. This book was released on 2018-07-03 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Micro/Nano Manufacturing" that was published in Micromachines

Download or read book Chemical Micro Process Engineering written by Volker Hessel and published by John Wiley & Sons. This book was released on 2004-04-12 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: A MULTI-FACETED, HIERARCHIC ANALYSIS OF CHEMICAL MICRO PROCESS TECHNOLOGY Micro Reactor Differentiation and Process Intensification Consequences of Chemical Micro Processing Physical and Chemical Implications Impact on Chemical Engineering Impact on Process Engineering Impact on Process Results Impact on Society and Ecology Impact on Economy Application Fields and Markets of Micro Reactors MODELLING AND SIMULATION OF MICRO REACTORS Flow Phenomena on the Microscale Methods of Computational Fluid Dynamics Flow Distributions Heat Transfer Mass Transfer and Mixing Reaction Kinetics and Modelling Free Surface Flow Flow in Porous Media GAS-PHASE REACTIONS Catalyst Coatings in Micro Channels Micro Reactors for Gas-Phase Reactions Oxidations Hydrogenations Dehydrogenations Substitutions Eliminations Additions and Coupling Reactions LIQUID- AND LIQUID/LIQUID-PHASE REACTIONS Micro Reactors for Liquid-Phase and Liquid/Liquid-Phase Recations Aliphatic Nucleophilic and Electrophilic Substitution such as Esterification, Acylation of Amines, Thiocyanation, and much more Aromatic Electrophilic and Nucleophilic Substitution such as Nitrations, Amino-de-halogenations, Diazo Chemistry, and much more Metal-catalysed Aromatic Substitution such as Suzuki and Sonogashira Couplings, and more Free Radical Substitution such as Alkane Nitration Addition to Carbon-Carbon and Carbon-hetero Multiple Bonds such as the Michael Addition, the Diels-Alder-Reaction, the Aldol Reaction, and much more Oxidations and Reductions Eliminations and Rearrangements Inorganic Reactions such as the Belousov-Zhabotinskii-Reaction, Complex Formations, and much more GAS/LIQUID CONTACTING Micro Reactors for Gas/Liquid Contacting Aromatic Electrophilic Substitution such as Direct Fluorinations Free Radical Substitution such as Alkane Fluorinations and Chlorinations Addition to Carbon-Carbon and Carbon-hetero Multiple Bonds such as Nitro-group Hydrogenation, Cycloalkane Hydrogenation, and more Oxidations and Reductions such as Alcohol Oxidation, Photo Diels-Alder Reactions, and more Inorganic Reactions such as Sulfite Oxidation.

Download or read book Micro Nanofluidics and Lab on Chip Based Emerging Technologies for Biomedical and Translational Research Applications Part B written by and published by Academic Press. This book was released on 2022-01-28 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro/Nanofluidics and Lab-on-Chip Based Emerging Technologies for Biomedical and Translational Research Applications - Part B, Volume 187 represents the collation of chapters written by eminent scientists worldwide. Chapters in this new release include Design and fabrication of microfluidics devices for molecular biology applications, Micro/Nanofluidics devices for drug delivery, From organ-on-chip to body-on-chip: the next generation of microfluidics platforms for in vitro drug toxicity testing, Micro/Nanofluidics for high throughput drug screening, Design, fabrication and assembly of lab-on-a-chip and its uses, Advances in microfluidic 3D cell culture for pre-clinical drug development, Tissue and organ culture on lab-on-a chip for biomedical applications, and much more. - Offers a basic understanding of the state-of-the-art design and fabrication of microfluidics/ nanofluidics and lab on chip - Explains how to develop microfluidics/nanofluidic for advanced application such as healthcare, high throughout drug screening, 3D cell culture and organ-on-chip - Discusses the emerging demands and research of micro/nanofluidic based devices in biomedical and translational research applications

Download or read book Micro Process Engineering written by Norbert Kockmann and published by John Wiley & Sons. This book was released on 2013-03-26 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition of 'Micro Process Engineering' was originally published in the successful series 'Advanced Micro & Nanosystems'. Authors from leading industrial players and research institutions present a concise and didactical introduction to Micro Process Engineering, the combination of microtechnology and process engineering into a most promising and powerful tool for revolutionizing chemical processes and industrial mass production of bulk materials, fine chemicals, pharmaceuticals and many other products. The book takes the readers from the fundamentals of engineering methods, transport processes, and fluid dynamics to device conception, simulation and modelling, control interfaces and issues of modularity and compatibility. Fabrication strategies and techniques are examined next, focused on the fabrication of suitable microcomponents from various materials such as metals, polymers, silicon, ceramics and glass. The book concludes with actual applications and operational aspects of micro process systems, giving broad coverage to industrial efforts in America, Europe and Asia as well as laboratory equipment and education.

Download or read book Innovations in Sustainable Energy and Cleaner Environment written by Ashwani K. Gupta and published by Springer. This book was released on 2019-07-19 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the state-of-the-art advances in several areas of energy, combustion, power, propulsion, and environment, focusing on the use of conventional and alternative fuels. It presents novel developments in the areas of biofuels and value added products from various feedstock materials, along with thermal management, emission control and environmental issues from energy conversion. Written by internationally renowned experts, the chapters in this volume cover the latest fundamental and applied research innovations on cleaner energy utilization for a wide range of devices extending from micro scale energy conversion to hypersonic propulsion using hydrocarbon fuels. The book will be useful as a ready reference for managers and practicing and research engineers, as well as graduate students and research organizations and institutions.

Download or read book 3D Printed Microfluidic Devices written by Savas Tasoglu and published by MDPI. This book was released on 2019-01-10 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "3D Printed Microfluidic Devices" that was published in Micromachines

Download or read book Three Dimensional Microfabrication Using Two Photon Polymerization written by Tommaso Baldacchini and published by William Andrew. This book was released on 2019-10-31 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three-Dimensional Microfabrication Using Two-Photon Polymerization, Second Edition offers a comprehensive guide to TPP microfabrication and a unified description of TPP microfabrication across disciplines. It offers in-depth discussion and analysis of all aspects of TPP, including the necessary background, pros and cons of TPP microfabrication, material selection, equipment, processes and characterization. Current and future applications are covered, along with case studies that illustrate the book's concepts. This new edition includes updated chapters on metrology, synthesis and the characterization of photoinitiators used in TPP, negative- and positive-tone photoresists, and nonlinear optical characterization of polymers. This is an important resource that will be useful for scientists involved in microfabrication, generation of micro- and nano-patterns and micromachining. - Discusses the major types of nanomaterials used in the agriculture and forestry sectors, exploring how their properties make them effective for specific applications - Explores the design, fabrication, characterization and applications of nanomaterials for new Agri-products - Offers an overview of regulatory aspects regarding the use of nanomaterials for agriculture and forestry