Download or read book Analysis and Synthesis Methods for the Appropriate Design of Parallel Mechanisms written by Joshua K. Pickard and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Uncertainties are an inherent element of the manufacturing and control of mechanisms. Generally, uncertainties are neglected in the analysis and synthesis of mechanisms, as they can be difficult to account for. However, the performance of real mechanisms depends on the uncertainties; thus, there is a need for reliable methods which are able to provide bounds on the true performance of mechanisms. Parallel mechanisms are considered in this work, where the design of a parallel mechanism accounting for uncertainties is termed an appropriate design. Reliable methods, based on interval analysis, are developed to analyze and synthesize appropriately designed parallel mechanisms, fittingly termed appropriate analysis and appropriate synthesis respectively. These appropriate methods are applied to the four-bar linkage and the 3-R̲RR planar parallel mechanism. Appropriate analysis methods compute the associated workspaces of mechanisms with an appropriate design. These workspaces consider the reachability, self-collisions, singularities, and wrench-capabilities of the mechanisms, and are used to guarantee whether the desired task is able to be accomplished by the mechanism. Appropriate synthesis methods are able to completely explore a continuous design parameter space to determine the complete set of appropriate designs of a mechanism which accomplish the desired task. Any design selected from this set is guaranteed to accomplish the desired task. The development of appropriate analysis and appropriate synthesis introduces a powerful new tool to mechanisms designers."--Pages ii-iii.
Download or read book Type Synthesis of Parallel Mechanisms written by Xianwen Kong and published by Springer. This book was released on 2007-10-28 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique monograph focuses on the systematic type synthesis of parallel mechanisms (PMs), a key issue in the creative design of a wide variety of innovative devices such as parallel manipulators, motion simulators, and haptic devices. Essential reading for researchers, developers, engineers and graduate students with interests in robotics, this book covers the classification of PMs as well as providing a large number of PMs ready to be used in practical applications.
Download or read book Theory of Parallel Mechanisms written by Zhen Huang and published by Springer Science & Business Media. This book was released on 2012-07-26 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains mechanism analysis and synthesis. In mechanism analysis, a mobility methodology is first systematically presented. This methodology, based on the author's screw theory, proposed in 1997, of which the generality and validity was only proved recently, is a very complex issue, researched by various scientists over the last 150 years. The principle of kinematic influence coefficient and its latest developments are described. This principle is suitable for kinematic analysis of various 6-DOF and lower-mobility parallel manipulators. The singularities are classified by a new point of view, and progress in position-singularity and orientation-singularity is stated. In addition, the concept of over-determinate input is proposed and a new method of force analysis based on screw theory is presented. In mechanism synthesis, the synthesis for spatial parallel mechanisms is discussed, and the synthesis method of difficult 4-DOF and 5-DOF symmetric mechanisms, which was first put forward by the author in 2002, is introduced in detail. Besides, the three-order screw system and its space distribution of the kinematic screws for infinite possible motions of lower mobility mechanisms are both analyzed.
Download or read book Analysis and Synthesis of Compliant Parallel Mechanisms Screw Theory Approach written by Chen Qiu and published by Springer Nature. This book was released on 2020-06-23 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the design of compliant mechanisms, presenting readers with a good understanding of both the solid mechanics of flexible elements and their configuration design, based on a mechanism-equivalent approach in the framework of screw theory. The book begins with the theoretical background of screw theory, and systematically addresses both the compliance characteristics of flexible elements and their configuration design. The book then covers a broad range of compliant parallel mechanism design topics, from stiffness to constraint decomposition, from conceptual design to dimensional design, and from analysis to synthesis, as well as the large deformation problem; this is followed by both simulations and physical experiments, offering readers a solid foundation and useful tools. Given its scope and the results it presents, the book will certainly benefit and inform future research on the topic. It offers a valuable asset for researchers, developers, engineers and graduate students with an interest in compliant mechanisms, robotics and screw theory.
Download or read book Analysis and Synthesis of Compliant Parallel Mechanisms screw Theory Approach written by Chen Qiu and published by . This book was released on 2021 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the design of compliant mechanisms, presenting readers with a good understanding of both the solid mechanics of flexible elements and their configuration design, based on a mechanism-equivalent approach in the framework of screw theory. The book begins with the theoretical background of screw theory, and systematically addresses both the compliance characteristics of flexible elements and their configuration design. The book then covers a broad range of compliant parallel mechanism design topics, from stiffness to constraint decomposition, from conceptual design to dimensional design, and from analysis to synthesis, as well as the large deformation problem; this is followed by both simulations and physical experiments, offering readers a solid foundation and useful tools. Given its scope and the results it presents, the book will certainly benefit and inform future research on the topic. It offers a valuable asset for researchers, developers, engineers and graduate students with an interest in compliant mechanisms, robotics and screw theory.
Download or read book Geometric Methods in Robotics and Mechanism Research written by Yunjiang Lou and published by LAP Lambert Academic Publishing. This book was released on 2011 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most recent research advances in the theory, design, and application of robotics and mechanisms. The topics cover Lie group theory based, screw theory based, and set theory based methods in type synthesis, kinematic and static analysis, and design of robotic mechanisms, especially parallel mechanisms. Innovative designs of parallel mechanism are obtained for pick and place applications, nano-manipulation, and surgical robots. The results should interest researchers, teachers, and students, in fields of engineering and mathematics related to robot theory, design, and application.
Download or read book New Trends in Mechanism and Machine Science written by Philippe Wenger and published by Springer. This book was released on 2016-09-03 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects the most recent advances in mechanism science and machine theory with application to engineering. It contains selected peer-reviewed papers of the sixth International Conference on Mechanism Science, held in Nantes, France, 20-23 September 2016, covering topics on mechanism design and synthesis, mechanics of robots, mechanism analysis, parallel manipulators, tensegrity mechanisms, cable mechanisms, control issues in mechanical systems, history of mechanisms, mechanisms for biomechanics and surgery and industrial and nonindustrial applications.
Download or read book New Trends in Mechanism Science written by Doina Pisla and published by Springer Science & Business Media. This book was released on 2010-08-12 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: After two succesful conferences held in Innsbruck (Prof. Manfred Husty) in 2006 and Cassino in 2008 (Prof Marco Ceccarelli) with the participation of the most important well-known scientists from the European Mechanism Science Community, a further conference was held in Cluj Napoca, Romania, in 2010 (Prof. Doina Pisla) to discuss new developments in the field. This book presents the most recent research advances in Mechanism Science with different applications. Amongst the topics treated are papers on Theoretical kinematics, Computational kinematics, Mechanism design, Mechanical transmissions, Linkages and manipulators, Mechanisms for biomechanics, Micro-mechanisms, Experimental mechanics, Mechanics of robots, Dynamics of multi-body systems, Dynamics of machinery, Control issues of mechanical systems, Novel designs, History of mechanism science etc.
Download or read book New Advances in Mechanisms Mechanical Transmissions and Robotics written by Erwin-Christian Lovasz and published by Springer Nature. This book was released on 2020-10-14 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the proceedings of the Joint International Conference of the XIII International Conference on Mechanisms and Mechanical Transmissions (MTM) and the XXIV International Conference on Robotics (Robotics), held in Timişoara, Romania. It addresses the applications of mechanisms and transmissions in several modern technical fields such as mechatronics, biomechanics, machines, micromachines, robotics and apparatus. In doing so, it combines theoretical findings and experimental testing. The book presents peer-reviewed papers written by researchers specialized in mechanism analysis and synthesis, dynamics of mechanisms and machines, mechanical transmissions, biomechanics, precision mechanics, mechatronics, micromechanisms and microactuators, computational and experimental methods, CAD in mechanism and machine design, mechanical design of robot architecture, parallel robots, mobile robots, micro and nano robots, sensors and actuators in robotics, intelligent control systems, biomedical engineering, teleoperation, haptics, and virtual reality.
Download or read book Advances in Robot Kinematics written by Jadran Lenarčič and published by Springer. This book was released on 2014-05-19 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topics addressed in this book cover the whole range of kinematic analysis, synthesis and design and consider robotic systems possessing serial, parallel and cable driven mechanisms. The robotic systems range from being less than fully mobile to kinematically redundant to over constrained. The fifty-six contributions report the latest results in robot kinematics with emphasis on emerging areas such as design and control of humanoids or humanoid subsystems. The book is of interest to researchers wanting to bring their knowledge up to date regarding modern topics in one of the basic disciplines in robotics, which relates to the essential property of robots, the motion of mechanisms.
Download or read book Mechanism Design written by Arthur G. Erdman and published by . This book was released on 1997 with total page 645 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Advances in Mechanisms Mechanical Transmissions and Robotics written by Burkhard Corves and published by Springer. This book was released on 2016-09-30 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the proceedings of the Joint International Conference of the XII International Conference on Mechanisms and Mechanical Transmissions (MTM) and the XXIII International Conference on Robotics (Robotics ’16), that was held in Aachen, Germany, October 26th-27th, 2016. It contains applications of mechanisms and transmissions in several modern technical fields such as mechatronics, biomechanics, machines, micromachines, robotics and apparatus. In connection with these fields, the work combines the theoretical results with experimental testing. The book presents reviewed papers developed by researchers specialized in mechanisms analysis and synthesis, dynamics of mechanisms and machines, mechanical transmissions, biomechanics, precision mechanics, mechatronics, micromechanisms and microactuators, computational and experimental methods, CAD in mechanism and machine design, mechanical design of robot architecture, parallel robots, mobile robots, micro and nano robots, sensors and actuators in robotics, intelligent control systems, biomedical engineering, teleoperation, haptics, and virtual reality.
Download or read book Topology Design of Robot Mechanisms written by Ting-Li Yang and published by Springer. This book was released on 2018-01-02 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the topology theory of mechanisms developed by the authors and provides a systematic method for the topology design of robot mechanisms. The main original theoretical contributions of this book include: A. Three basic concepts · The “geometrical constraint type of axes” is introduced as the third element of the topological structure of a mechanism. When it is combined with the other two elements, the kinematic pair and the connection of links, the symbolic expression of the topological structure is independent of the motion positions (except for the singularity positions) and the fixed coordinate system (Chapter 2). · The position and orientation characteristic (POC) set is used to describe the POC of the relative motion between any two links. The POC set, derived from the unit vector set of the velocity of a link, is only depend on the topological structure of a mechanism. Therefore, it is also independent of the motion positions and the fixed coordinate system (Chapter 3). · The single open chain (SOC) unit is the base unit of the topological structure used to develop the four basic equations of the mechanism topology (Chapters 2, 4–6). B. The mechanism composition principle based on the SOC units This book proposes a mechanism composition principle, based on the SOC units, to establish a systematic theory for the unified modeling of the topology, kinematics, and dynamics of mechanisms based on the SOC units (Chapter 7). C. Four basic equations • The POC equation of serial mechanisms with 10 symbolic operation rules (Chapter 4). • The POC equation of parallel mechanisms with 14 symbolic operation rules (Chapter 5). • The general DOF formula for spatial mechanisms (Chapter 6). • The coupling degree formula for the Assur kinematic chain (Chapter 7). D. One systematic method for the topology design of robot mechanisms (Chapters 8–10) Based on the three basic concepts and the four basic equations addressed above, this book puts forward a systematic method for the topology design of parallel mechanisms, which is fundamentally different from all existing methods. Its main characteristics are as follows: • The design process includes two stages: the first is structure synthesis, which derives many structure types; the second involves the performance analysis, classification and optimization of structure types derived from the first stage. • The design operation is independent of the motion positions and the fixed coordinate system. Therefore, the proposed method is essentially a geometrical method, which ensures the full-cycle DOF and the generality of geometric conditions of mechanism existence. • Each individual design step follows an explicit formula or the guidelines for design criteria, making the operation simple, feasible and reproducible. In addition, the topology design of the SCARA PMs is studied in detail to demonstrate the proposed method (Chapter 10).
Download or read book Computational Methods in Mechanical Systems written by Jorge Angeles and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chapters of this book summarize the lectures delivered du ring the NATO Advanced Study Institute (ASI) on Computational Methods in Mechanisms, that took place in the Sts. Constantin and Elena Resort, near Varna, on the Bulgarian Coast of the Black Sea, June 16-28, 1997. The purpose of the ASI was to bring together leading researchers in the area of mechanical systems at large, with special emphasis in the computational issues around their analysis, synthesis, and optimization, during two weeks of lectures and discussion. A total of 89 participants from 23 count ries played an active role during the lectures and sessions of contributed papers. Many of the latter are being currently reviewed for publication in specialized journals. The subject of the book is mechanical systems, Le. , systems composed of rigid and flexible bodies, coupled by mechanical means so as to constrain their various bodies in a goal-oriented manner, usually driven under computer con trol. Applications of the discipline are thus of the most varied nature, ranging from transportation systems to biomedical devices. U nder normal operation conditions, the constitutive bodies of a mechanical system can be consid ered to be rigid, the rigidity property then easing dramatically the analysis of the kinematics and dynamics of the system at hand. Examples of these systems are the suspension of a terrestrial vehicle negotiating a curve at speeds within the allowed or recommended limits and the links of multiaxis industrial robots performing conventional pick-and-place operations.
Download or read book Romansy 19 Robot Design Dynamics and Control written by Vincent Padois and published by Springer Science & Business Media. This book was released on 2013-01-20 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel robots modeling and analysis.- Parallel robots design, calibration and control.- Robot design.- Robot control.- Mobile robots design, modeling and control.- Humans and humanoids.- Perception. The papers in this volume provide a vision of the evolution of the robotics disciplines and indicate new directions in which these disciplines are foreseen to develop. Paper topics include, but are not limited to, novel robot design and robot modules/components, service, rehabilitation, mobile robots, humanoid robots, challenges in control, modeling, kinematical and dynamical analysis of robotic systems, innovations in sensor systems for robots and perception, and recent advances in robotics. In particular, many contributions on parallel robotics from leading researchers in this domain are included.
Download or read book Finite and Instantaneous Screw Theory in Robotic Mechanism written by Tao Sun and published by Springer Nature. This book was released on 2020-02-13 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a finite and instantaneous screw theory for the development of robotic mechanisms. It addresses the analytical description and algebraic computation of finite motion, resulting in a generalized type synthesis approach. It then discusses the direct connection between topology and performance models, leading to an integrated performance analysis and design framework. The book then explores parameter uncertainty and multiple performance requirements for reliable, optimal design methods, and describes the error accumulation principle and parameter identification algorithm, to increase robot accuracy. It proposes a unified and generic methodology, and appliesto the invention, analysis, design, and calibration of robotic mechanisms. The book is intended for researchers, graduate students and engineers in the fields of robotic mechanism and robot design and applications./div
Download or read book The Configuration Space Method for Kinematic Design of Mechanisms written by Elisha Sacks and published by MIT Press. This book was released on 2010 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: A novel algorithmic approach to mechanism design based on a geometric representation of kinematic function called configuration space partitions. This book presents the configuration space method for computer-aided design of mechanisms with changing part contacts. Configuration space is a complete and compact geometric representation of part motions and part interactions that supports the core mechanism design tasks of analysis, synthesis, and tolerancing. It is the first general algorithmic treatment of the kinematics of higher pairs with changing contacts. It will help designers detect and correct design flaws and unexpected kinematic behaviors, as demonstrated in the book's four case studies taken from industry. After presenting the configuration space framework and algorithms for mechanism kinematics, the authors describe algorithms for kinematic analysis, tolerancing, and synthesis based on configuration spaces. The case studies follow, illustrating the application of the configuration space method to the analysis and design of automotive, micro-mechanical, and optical mechanisms. Appendixes offer a catalog of higher-pair mechanisms and a description of HIPAIR, an open source C++ mechanical design system that implements some of the configuration space methods described in the book, including configuration space visualization and kinematic simulation. HIPAIR comes with an interactive graphical user interface and many sample mechanism input files. The Configuration Space Method for Kinematic Design of Mechanisms will be a valuable resource for students, researchers, and engineers in mechanical engineering, computer science, and robotics.
