Download or read book Analysis and Prediction of Multiple Site Damage MSD Fatigue Crack Growth written by D. S. Dawicke and published by . This book was released on 1992 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analysis and Prediction of Multiple Site Damage Msd Fatigue Crack Growth written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-08-16 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: A technique was developed to calculate the stress intensity factor for multiple interacting cracks. The analysis was verified through comparison with accepted methods of calculating stress intensity factors. The technique was incorporated into a fatigue crack growth prediction model and used to predict the fatigue crack growth life for multiple-site damage (MSD). The analysis was verified through comparison with experiments conducted on uniaxially loaded flat panels with multiple cracks. Configuration with nearly equal and unequal crack distribution were examined. The fatigue crack growth predictions agreed within 20 percent of the experimental lives for all crack configurations considered. Dawicke, D. S. and Newman, J. C., Jr. Langley Research Center NASA-TP-3231, L-17006, NAS 1.60:3231 RTOP 505-63-50-04...

Download or read book Fatigue Damage Crack Growth and Life Prediction written by F. Ellyin and published by Springer Science & Business Media. This book was released on 1996-11-30 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue failure is a multi-stage process. It begins with the initiation of cracks, and with continued cyclic loading the cracks propagate, finally leading to the rupture of a component or specimen. The demarcation between the above stages is not well-defined. Depending upon the scale of interest, the variation may span three orders of magnitude. For example, to a material scientist an initiated crack may be of the order of a micron, whereas for an engineer it can be of the order of a millimetre. It is not surprising therefore to see that investigation of the fatigue process has followed different paths depending upon the scale of phenomenon under investigation. Interest in the study of fatigue failure increased with the advent of industrial ization. Because of the urgent need to design against fatigue failure, early investiga tors focused on prototype testing and proposed failure criteria similar to design formulae. Thus, a methodology developed whereby the fatigue theories were proposed based on experimental observations, albeit at times with limited scope. This type of phenomenological approach progressed rapidly during the past four decades as closed-loop testing machines became available.

Download or read book NASA Scientific and Technical Publications written by and published by . This book was released on 1993 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Monthly Catalogue United States Public Documents written by and published by . This book was released on 1993-07 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book NASA Scientific and Technical Publications A Catalog of Special Publications Reference Publications Conference Publications and Technical Papers 1991 1992 written by and published by . This book was released on 1993 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 1993 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.

Download or read book Biaxial Multiaxial Fatigue and Fracture written by Andrea Carpinteri and published by Elsevier. This book was released on 2003-03-19 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European Structural Integrity Society (ESIS) Technical Commitee on Fatigue of Engineering Materials and Structures (TC3) decided to compile a Special Technical Publication (ESIS STP) based on the 115 papers presented at the 6th International Conference on Biaxial/Multiaxial Fatigue and Fracture. The 25 papers included in the STP have been extended and revised by the authors. The conference was held in Lisbon, Portugal, on 25-28 June 2001, and was chaired by Manual De Freitas, Instituto Superior Tecnico, Lisbon. The meeting, organised by the Instituto Superior Tecnico and sponsored by the Portuguese Minesterio da Cienca e da Tecnologia and by the European Structural Integrity Society, was attended by 151 delegates from 20 countries. The papers in the present book deal with the theoretical, numerical and experimental aspects of the Multiaxial fatigue and fracture of engineering materials and structures. They are divided in to the following six sections; Multiaxial Fatigue of Welded Structures; High cycle Multiaxial fatigue; Non proportional and Variable-Amplitude loading; Defects, Notches, Crack Growth; Low Cycle Multiaxial Fatigue; Applications and Testing Methods. As is well-known, most engineering components and structures in the mechanical, aerospace, power generation, and other industries are subjected to multiaxial loading during their service life. One of the most difficult tasks in design against fatigue and fracture is to translate the information gathered from uniaxial fatigue and fracture tests on engineering materials into applications involving complex states of cyclic stress-strain conditions. This book is the result of co-operation between many researchers from different laboratories, universities and industries in a number of countries.

Download or read book AIAA Journal written by American Institute of Aeronautics and Astronautics and published by . This book was released on 2003 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Probabilistic Aspects of Life Prediction written by and published by ASTM International. This book was released on with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of Fatigue Crack Paths FCP 2003 Parma Italy 2003 written by and published by Gruppo Italiano Frattura. This book was released on with total page 821 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Second Joint NASA FAA DoD Conference on Aging Aircraft written by and published by . This book was released on 1999 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Structural Integrity of Aging Airplanes written by Satya N. Atluri and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emergence of civil aviation as a means of mass transportation is primarily due to the large scale construction of jet airplanes in the past 30 years or so. A large number of these jet airplanes is currently operating at or beyond their designed fatigue lives. Thus, the structural integrity of these aging airplanes has become an issue of major concern to all nations of the world. To bring the needed technical and research focus on the issues involved in the life-enhancement and safety-assurance of aging airplanes, the Federal Aviation Administration sponsored a symposium in Atlanta, GA, USA, during 20-22 March 1990. This symposium, under the title "International Symposium on Structural Integrity of Aging Airplanes· was organized jointly be the Georgia Institute of Technology (Center for Computational Mechanics) and the Transportation Systems Center (Cambridge, MA) of the U.S. Department of Transportation. Industrial and academic experts from several countries in North America, Europe and Asia, were invited to discuss their experiences and proposed solutions. This monograph contains the original papers that represent the expanded and edited versions of the talks presented at this symposium. This book aims to bring the collective experience, from across the world, with problems related to the structural integrity of aging airplanes to the attention of the professional and research community at large - in the hope that it may stimulate further fruitful research on this important topic of global concern.

Download or read book ICAF 2019 Structural Integrity in the Age of Additive Manufacturing written by Antoni Niepokolczycki and published by Springer. This book was released on 2019-07-03 with total page 1164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers papers presented at the 36th conference and 30th Symposium of the International Committee on Aeronautical Fatigue and Structural integrity. Focusing on the main theme of “Structural Integrity in the Age of Additive Manufacturing”, the chapters cover different aspects concerning research, developments and challenges in this field, offering a timely reference guide to designers, regulators, manufacturer, and both researchers and professionals of the broad aerospace community.

Download or read book A Collection of Technical Papers written by and published by . This book was released on 2001 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book New Materials for Next Generation Commercial Transports written by National Research Council and published by National Academies Press. This book was released on 1996-04-15 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major objective of this book was to identify issues related to the introduction of new materials and the effects that advanced materials will have on the durability and technical risk of future civil aircraft throughout their service life. The committee investigated the new materials and structural concepts that are likely to be incorporated into next generation commercial aircraft and the factors influencing application decisions. Based on these predictions, the committee attempted to identify the design, characterization, monitoring, and maintenance issues that are critical for the introduction of advanced materials and structural concepts into future aircraft.