Download or read book Analysis and Compensation of Kinetic Friction in Robotic and Mechatronic Control Systems written by Michael Ruderman and published by . This book was released on 2024 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Analysis and Compensation of Kinetic Friction in Robotic and Mechatronic Control Systems comprehensively covers the theory behind kinetic friction, as well as compensation methods and practical solutions, and serves as a key companion to studying different control systems. Beginning with a clear introduction to the subject, the book goes on to include three main facets of kinetic friction, starting with phenomena of kinetic friction in drives. Following on from this, the book examines motion dynamics with friction, which introduces dynamic system equations and focuses on both energy balance and dissipation. Finally, it explains compensation of friction in motion control, which summarises key compensation methods in controlled mechanical systems. Introducing various basic feedback control methods, including observer-based methods to compensate for kinetic friction, the book provides practical information which can be used in a wide variety of contexts not specific to particular systems or applications. The book will be of interest to students and industry workers in the field of robotics, mechanical systems and control engineering"--

Download or read book Analysis and Compensation of Kinetic Friction in Robotic and Mechatronic Control Systems written by Michael Ruderman and published by CRC Press. This book was released on 2023-09-21 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis and Compensation of Kinetic Friction in Robotic and Mechatronic Control Systems comprehensively covers kinetic friction in a robotics, mechatronics, and control engineering context. Providing the theory behind kinetic friction, as well as compensation methods and practical solutions, the text is a key companion to studying different control systems. Beginning with a clear introduction to the subject, the book goes on to include three main facets of kinetic friction, starting with phenomena of kinetic friction in drives. This chapter explains friction interfaces and friction effects. Following from this, the next chapter looks at motion dynamics with friction, which introduces dynamic system equations and focuses on both energy balance and dissipation. Finally, the book looks at compensation of friction in motion control, which summarises key compensation methods in controlled mechanical systems. Introducing various basic feedback control methods, including observer-based methods to compensate for kinetic friction, the text provides practical information that can be used in a wide variety of contexts not specific to particular systems or applications. This book will be of interest to students and industry workers in the field of robotics, mechanical systems and control engineering.

Download or read book Dynamics and Control of Robotic Manipulators with Contact and Friction written by Shiping Liu and published by John Wiley & Sons. This book was released on 2019-02-11 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to the friction, contact and impact on robot control and force feedback mechanism Dynamics and Control of Robotic Manipulators with Contact and Friction offers an authoritative guide to the basic principles of robot dynamics and control with a focus on contact and friction. The authors discuss problems in interaction between human and real or virtual robot where dynamics with friction and contact are relevant. The book fills a void in the literature with a need for a text that considers the contact and friction generated in robot joints during their movements. Designed as a practical resource, the text provides the information needed for task planning in view of contact, impact and friction for the designer of a robot control system for high accuracy and long durability. The authors include a review of the most up-to-date advancements in robot dynamics and control. It contains a comprehensive resource to the effective design and fabrication of robot systems and components for engineering and scientific purposes. This important guide: Offers a comprehensive reference with systematic treatment and a unified framework Includes simulation and experiments used in dynamics and control of robot considering contact, impact and friction Discusses the most current tribology methodology used to treat the multiple–scale effects Contains valuable descriptions of experiments and software used Presents illustrative accounts on the methods employed to handle friction in the closed loop, including the principles, implementation, application scope, merits and demerits Offers a cohesive treatment that covers tribology and multi-scales, multi-physics and nonlinear stochastic dynamics control Written for graduate students of robotics, mechatronics, mechanical engineering, tracking control and practicing professionals and industrial researchers, Dynamics and Control of Robotic Manipulators with Contact and Friction offers a review to effective design and fabrication of stable and durable robot system and components.

Download or read book Advances in Mechatronics written by Horacio Martinez-Alfaro and published by IntechOpen. This book was released on 2011-08-29 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerous books have already been published specializing in one of the well known areas that comprise Mechatronics: mechanical engineering, electronic control and systems. The goal of this book is to collect state-of-the-art contributions that discuss recent developments which show a more coherent synergistic integration between the mentioned areas. The book is divided in three sections. The first section, divided into five chapters, deals with Automatic Control and Artificial Intelligence. The second section discusses Robotics and Vision with six chapters, and the third section considers Other Applications and Theory with two chapters.

Download or read book Modelling Identification and Compensation of Friction in Robot Control Systems written by Mohammad Reza Elhami and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book International Conference on Reliable Systems Engineering ICoRSE 2023 written by Daniela Doina Cioboată and published by Springer Nature. This book was released on 2023-09-04 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises state-of-the-art research results in the field of mechatronics and other closely related areas and that will be presented on occasion of the third “International Conference of Reliable Systems Engineering (ICoRSE 2023)” that will take place in Bucharest, Romania, between 07–08 September 2023. The first two ICoRSE editions brought together professors, Ph.D. students, and researchers in Europe, North America, and Asia, in countries such as: England, Albania, Austria, Bulgaria, Canada, Czech Republic, Germany, France, Italy, Portugal, Turkey, Ukraine, Uzbekistan, and Vietnam. In this year’s edition of the conference, we have benefitted from the inclusion in the scientific committee of the conference of professors in all of these countries, and we cover a wide variety of topics, such as: theoretical and applied mechanics; cyber-physical systems, robotics, smart bio-medical and bio-mechatronic systems, new and intelligent materials and structures, modelling and simulation in mechanics and mechatronics, smart mechatronic production and control system, optics, control systems, big data modelling, micro- and nanotechnology, automation, manufacturing optimization, and other. Since the book ́s chapters represent contributions of scholars who work in both state-funded institutions and in the business environment, they reflect a clear picture of the novelties attained in the leading-edge sciences that are in the scope of the conference. It is our belief that the book is useful to both students and researchers in all areas of engineering, who will each find at least one topic worthy of their interest in this work.

Download or read book Wearable Robotics in the Rehabilitation Continuum of Care Assessment Treatment and Home Assistance written by Emilio Trigili and published by Frontiers Media SA. This book was released on 2023-11-14 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dynamics and Control of Robotic Systems written by Andrew J. Kurdila and published by John Wiley & Sons. This book was released on 2019-12-16 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of the principles and dynamics of robotic systems Dynamics and Control of Robotic Systems offers a systematic and thorough theoretical background for the study of the dynamics and control of robotic systems. The authors—noted experts in the field—highlight the underlying principles of dynamics and control that can be employed in a variety of contemporary applications. The book contains a detailed presentation of the precepts of robotics and provides methodologies that are relevant to realistic robotic systems. The robotic systems represented include wide range examples from classical industrial manipulators, humanoid robots to robotic surgical assistants, space vehicles, and computer controlled milling machines. The book puts the emphasis on the systematic application of the underlying principles and show how the computational and analytical tools such as MATLAB, Mathematica, and Maple enable students to focus on robotics’ principles and theory. Dynamics and Control of Robotic Systems contains an extensive collection of examples and problems and: Puts the focus on the fundamentals of kinematics and dynamics as applied to robotic systems Presents the techniques of analytical mechanics of robotics Includes a review of advanced topics such as the recursive order N formulation Contains a wide array of design and analysis problems for robotic systems Written for students of robotics, Dynamics and Control of Robotic Systems offers a comprehensive review of the underlying principles and methods of the science of robotics.

Download or read book A Mathematical Introduction to Robotic Manipulation written by Richard M. Murray and published by CRC Press. This book was released on 2017-12-14 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Mathematical Introduction to Robotic Manipulation presents a mathematical formulation of the kinematics, dynamics, and control of robot manipulators. It uses an elegant set of mathematical tools that emphasizes the geometry of robot motion and allows a large class of robotic manipulation problems to be analyzed within a unified framework. The foundation of the book is a derivation of robot kinematics using the product of the exponentials formula. The authors explore the kinematics of open-chain manipulators and multifingered robot hands, present an analysis of the dynamics and control of robot systems, discuss the specification and control of internal forces and internal motions, and address the implications of the nonholonomic nature of rolling contact are addressed, as well. The wealth of information, numerous examples, and exercises make A Mathematical Introduction to Robotic Manipulation valuable as both a reference for robotics researchers and a text for students in advanced robotics courses.

Download or read book Visual Control of Robots written by Peter I. Corke and published by Taylor & Francis Group. This book was released on 1996 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Wearable Robots written by José L. Pons and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wearable robot is a mechatronic system that is designed around the shape and function of the human body, with segments and joints corresponding to those of the person it is externally coupled with. Teleoperation and power amplification were the first applications, but after recent technological advances the range of application fields has widened. Increasing recognition from the scientific community means that this technology is now employed in telemanipulation, man-amplification, neuromotor control research and rehabilitation, and to assist with impaired human motor control. Logical in structure and original in its global orientation, this volume gives a full overview of wearable robotics, providing the reader with a complete understanding of the key applications and technologies suitable for its development. The main topics are demonstrated through two detailed case studies; one on a lower limb active orthosis for a human leg, and one on a wearable robot that suppresses upper limb tremor. These examples highlight the difficulties and potentialities in this area of technology, illustrating how design decisions should be made based on these. As well as discussing the cognitive interaction between human and robot, this comprehensive text also covers: the mechanics of the wearable robot and it’s biomechanical interaction with the user, including state-of-the-art technologies that enable sensory and motor interaction between human (biological) and wearable artificial (mechatronic) systems; the basis for bioinspiration and biomimetism, general rules for the development of biologically-inspired designs, and how these could serve recursively as biological models to explain biological systems; the study on the development of networks for wearable robotics. Wearable Robotics: Biomechatronic Exoskeletons will appeal to lecturers, senior undergraduate students, postgraduates and other researchers of medical, electrical and bio engineering who are interested in the area of assistive robotics. Active system developers in this sector of the engineering industry will also find it an informative and welcome resource.

Download or read book The Mechatronics Handbook 2 Volume Set written by Robert H. Bishop and published by CRC Press. This book was released on 2018-10-08 with total page 1416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive reference on mechatronics, The Mechatronics Handbook was quickly embraced as the gold standard in the field. From washing machines, to coffeemakers, to cell phones, to the ubiquitous PC in almost every household, what, these days, doesn’t take advantage of mechatronics in its design and function? In the scant five years since the initial publication of the handbook, the latest generation of smart products has made this even more obvious. Too much material to cover in a single volume Originally a single-volume reference, the handbook has grown along with the field. The need for easy access to new material on rapid changes in technology, especially in computers and software, has made the single volume format unwieldy. The second edition is offered as two easily digestible books, making the material not only more accessible, but also more focused. Completely revised and updated, Robert Bishop’s seminal work is still the most exhaustive, state-of-the-art treatment of the field available.

Download or read book Rehabilitation Robotics written by Roberto Colombo and published by Academic Press. This book was released on 2018-03-08 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rehabilitation Robotics gives an introduction and overview of all areas of rehabilitation robotics, perfect for anyone new to the field. It also summarizes available robot technologies and their application to different pathologies for skilled researchers and clinicians. The editors have been involved in the development and application of robotic devices for neurorehabilitation for more than 15 years. This experience using several commercial devices for robotic rehabilitation has enabled them to develop the know-how and expertise necessary to guide those seeking comprehensive understanding of this topic. Each chapter is written by an expert in the respective field, pulling in perspectives from both engineers and clinicians to present a multi-disciplinary view. The book targets the implementation of efficient robot strategies to facilitate the re-acquisition of motor skills. This technology incorporates the outcomes of behavioral studies on motor learning and its neural correlates into the design, implementation and validation of robot agents that behave as ‘optimal’ trainers, efficiently exploiting the structure and plasticity of the human sensorimotor systems. In this context, human-robot interaction plays a paramount role, at both the physical and cognitive level, toward achieving a symbiotic interaction where the human body and the robot can benefit from each other’s dynamics. Provides a comprehensive review of recent developments in the area of rehabilitation robotics Includes information on both therapeutic and assistive robots Focuses on the state-of-the-art and representative advancements in the design, control, analysis, implementation and validation of rehabilitation robotic systems

Download or read book Robotics written by B. Z. Sandler and published by Academic Press. This book was released on 1999-04-28 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robotics, Second Edition is an essential addition to the toolbox of any engineer or hobbyist involved in the design of any type of robot or automated mechanical system. It is the only book available that takes the reader through a step-by step design process in this rapidly advancing specialty area of machine design. This book provides the professional engineer and student with important and detailed methods and examples of how to design the mechanical parts of robots and automated systems. Most robotics and automation books today emphasis the electrical and control aspects of design without any practical coverage of how to design and build the components, the machine or the system. The author draws on his years of industrial design experience to show the reader the design process by focusing on the real, physical parts of robots and automated systems. Answers the questions: How are machines built? How do they work? How does one best approach the design process for a specific machine? Thoroughly updated with new coverage of modern concepts and techniques, such as rapid modeling, automated assembly, parallel-driven robots and mechatronic systems Calculations for design completed with Mathematica which will help the reader through its ease of use, time-saving methods, solutions to nonlinear equations, and graphical display of design processes Use of real-world examples and problems that every reader can understand without difficulty Large number of high-quality illustrations Self-study and homework problems are integrated into the text along with their solutions so that the engineering professional and the student will each find the text very useful

Download or read book Intelligent Mechatronic Systems written by Rochdi Merzouki and published by Springer Science & Business Media. This book was released on 2012-11-27 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acting as a support resource for practitioners and professionals looking to advance their understanding of complex mechatronic systems, Intelligent Mechatronic Systems explains their design and recent developments from first principles to practical applications. Detailed descriptions of the mathematical models of complex mechatronic systems, developed from fundamental physical relationships, are built on to develop innovative solutions with particular emphasis on physical model-based control strategies. Following a concurrent engineering approach, supported by industrial case studies, and drawing on the practical experience of the authors, Intelligent Mechatronic Systems covers range of topic and includes: An explanation of a common graphical tool for integrated design and its uses from modeling and simulation to the control synthesis Introductions to key concepts such as different means of achieving fault tolerance, robust overwhelming control and force and impedance control Dedicated chapters for advanced topics such as multibody dynamics and micro-electromechanical systems, vehicle mechatronic systems, robot kinematics and dynamics, space robotics and intelligent transportation systems Detailed discussion of cooperative environments and reconfigurable systems Intelligent Mechatronic Systems provides control, electrical and mechanical engineers and researchers in industrial automation with a means to design practical, functional and safe intelligent systems.

Download or read book Elastic Robot Joints written by Michael Ruderman and published by . This book was released on 2016-04-05 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the modeling and control of elastic robot joints for which each axis of the robotic manipulator is controlled as a single-input-single-output (SISO) system with disturbances, otherwise known as independent joint control. It also shows how to account for joint elasticities in a centralized controller when treating the robotic manipulator as a coupled multiple-input-multiple-output (MIMO) system. The book analyzes modeling and control solutions, supported by specially elaborated simulation examples and an experimental case study.

Download or read book Robotics Vision and Control written by Peter Corke and published by Springer. This book was released on 2011-09-05 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author has maintained two open-source MATLAB Toolboxes for more than 10 years: one for robotics and one for vision. The key strength of the Toolboxes provide a set of tools that allow the user to work with real problems, not trivial examples. For the student the book makes the algorithms accessible, the Toolbox code can be read to gain understanding, and the examples illustrate how it can be used —instant gratification in just a couple of lines of MATLAB code. The code can also be the starting point for new work, for researchers or students, by writing programs based on Toolbox functions, or modifying the Toolbox code itself. The purpose of this book is to expand on the tutorial material provided with the toolboxes, add many more examples, and to weave this into a narrative that covers robotics and computer vision separately and together. The author shows how complex problems can be decomposed and solved using just a few simple lines of code, and hopefully to inspire up and coming researchers. The topics covered are guided by the real problems observed over many years as a practitioner of both robotics and computer vision. It is written in a light but informative style, it is easy to read and absorb, and includes a lot of Matlab examples and figures. The book is a real walk through the fundamentals of robot kinematics, dynamics and joint level control, then camera models, image processing, feature extraction and epipolar geometry, and bring it all together in a visual servo system. Additional material is provided at http://www.petercorke.com/RVC