Download or read book Coatings for High Temperature Structural Materials written by National Research Council and published by National Academies Press. This book was released on 1996-05-13 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book assesses the state of the art of coatings materials and processes for gas-turbine blades and vanes, determines potential applications of coatings in high-temperature environments, identifies needs for improved coatings in terms of performance enhancements, design considerations, and fabrication processes, assesses durability of advanced coating systems in expected service environments, and discusses the required inspection, repair, and maintenance methods. The promising areas for research and development of materials and processes for improved coating systems and the approaches to increased coating standardization are identified, with an emphasis on materials and processes with the potential for improved performance, quality, reproducibility, or manufacturing cost reduction.
Download or read book Thermal Barrier Coatings written by Hongbo Guo and published by Woodhead Publishing. This book was released on 2023-01-18 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Barrier Coatings, Second Edition plays a critical role in counteracting the effects of corrosion and degradation of exposed materials in high-temperature environments such as gas turbine and aero-engines. This updated edition reviews recent advances in the processing and performance of thermal barrier coatings, as well as their failure mechanisms. Novel technologies for the manufacturing of thermal barrier coatings (TBCs) such as plasma spray-physical vapor deposition and suspension plasma spray, are covered, as well as severe degradation of TBCs caused by CMAS attack. In addition to discussions of new materials and technologies, an outlook about next generation TBCs, including T/EBCs is discussed.This edition will provide the fundamental science and engineering of thermal barrier coatings for researchers in the field of TBCs, as well as students looking for a tutorial. - Includes coverage of emerging materials, such as rare-earth doped ceramics - Presents the latest on plasma spray-physical vapor deposition and suspension (solution precursor) - Discusses the degradation of TBCs caused by CMAS attack and its protection - Looks at thermally environmental barrier coatings, interdiffusion and diffusion barrier
Download or read book Environmental Barrier Coatings written by Kang N. Lee and published by MDPI. This book was released on 2020-12-29 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: The global increase in air travel will require commercial vehicles to be more efficient than ever before. Advanced engine hot section materials are a key technology required to keep fuel consumption and emission to a minimum in next-generation gas turbines. Ceramic matrix composites (CMCs) are the most promising material to revolutionize gas turbine hot section materials technology because of their excellent high‐temperature properties. Rapid surface recession due to volatilization by water vapor is the Achilles heel of CMCs. Environmental barrier coatings (EBCs) is an enabling technology for CMCs, since it protects CMCs from water vapor. The first CMC component entered into service in 2016 in a commercial engine, and more CMC components are scheduled to follow within the next few years. One of the most difficult challenges to CMC components is EBC durability, because failure of EBC leads to a rapid reduction in CMC component life. Key contributors to EBC failure include recession, oxidation, degradation by calcium‐aluminum‐magnesium silicates (CMAS) deposits, thermal and thermo‐mechanical strains, particle erosion, and foreign object damage (FOD). Novel EBC chemistries, creative EBC designs, and robust processes are required to meet EBC durability challenges. Engine-relevant testing, characterization, and lifing methods need to be developed to improve EBC reliability. The aim of this Special Issue is to present recent advances in EBC technology to address these issues. In particular, topics of interest include but are not limited to the following: • Novel EBC chemistries and designs; • Processing including plasma spray, suspension plasma spray, solution precursor plasma spray, slurry process, PS-PVD, EB-PVD, and CVD; • Testing, characterization, and modeling; • Lifing.
Download or read book Thermal Barrier Coatings Failure Theory and Evaluation Technology written by Yichun Zhou and published by Springer Nature. This book was released on 2022-10-08 with total page 943 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the failure theories and evaluation techniques of thermal barrier coatings, covering the thermal-mechanical–chemical coupling theories, performance and damage characterization techniques, and related evaluations. Thermal barrier coatings are the key thermal protection materials for high-temperature components in advanced aeroengines. Coating spallation is a major technical bottleneck faced by researchers. The extremely complex microstructure, diverse service environments, and failure behaviors bring challenges to the spallation analysis in terms of the selective use of mechanical theories, experimental methods, and testing platforms. In the book, the authors provide a systematic summary of the latest research and technological advances and present their insights and findings in the past couple of decades. This book is not only suitable for researchers and engineers in thermal barrier coatings and related fields but also a good reference for upper-undergraduate and postgraduate students of materials science and mechanics majors.
Download or read book Properties and Characterization of Modern Materials written by Andreas Öchsner and published by Springer. This book was released on 2016-07-30 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on robust characterization and prediction methods for materials in technical applications as well as the materials’ safety features during operation. In particular, it presents methods for reliably predicting material properties, an aspect that is becoming increasingly important as engineering materials are pushed closer and closer to their limits to boost the performance of machines and structures. To increase their engineering value, components are now designed under the consideration of their multiphysical properties and functions, which requires much more intensive investigation and characterization of these materials. The materials covered in this monograph range from metal-based groups such as lightweight alloys, to advanced high-strength steels and modern titanium alloys. Furthermore, a wide range of polymers and composite materials (e.g. with micro- and nanoparticles or fibres) is covered. The book explores methods for property prediction from classical mechanical characterization-related fields of application, for example, from wear, creep, fatigue and crack growth, to specific surface properties, to dielectric and electrochemical values. As in all fields of modern engineering, the process is often accompanied by numerical simulation and optimization.
Download or read book Design of Thermal Barrier Coatings written by Mohit Gupta and published by Springer. This book was released on 2015-05-05 with total page 93 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the relationships between microstructure, interface roughness, and properties of thermal barrier coatings. The author proposes a method for the reduction of the thermal conductivity of the ceramic layer in order to increase the lifetime of thermal barrier coatings. He includes models for the optimization of ceramic layer microstructure and interface roughness.
Download or read book High Temperature Coatings written by Sudhangshu Bose and published by Butterworth-Heinemann. This book was released on 2017-11-27 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Coatings, Second Edition, demonstrates how to counteract the thermal effects of rapid corrosion and degradation of exposed materials and equipment that can occur under high operating temperatures. This is the first true practical guide on the use of thermally protective coatings for high-temperature applications, including the latest developments in materials used for protective coatings. It covers the make-up and behavior of such materials under thermal stress and the methods used for applying them to specific types of substrates, as well as invaluable advice on inspection and repair of existing thermal coatings. With his long experience in the aerospace gas turbine industry, the author has compiled the very latest in coating materials and coating technologies, as well as hard-to-find guidance on maintaining and repairing thermal coatings, including appropriate inspection protocols. The book is supplemented with the latest reference information and additional support to help readers find more application- and industry-type coatings specifications and uses. - Offers an overview of the underlying fundamental concepts of thermally-protective coatings, including thermodynamics, energy kinetics, crystallography and equilibrium phases - Covers essential chemistry and physics of underlying substrates, including steels, nickel-iron alloys, nickel-cobalt alloys and titanium alloys - Provides detailed guidance on a wide variety of coating types, including those used against high temperature corrosion and oxidative degradation and thermal barrier coatings
Download or read book The Mechanics and Reliability of Films Multilayers and Coatings written by Matthew R. Begley and published by Cambridge University Press. This book was released on 2017-03-24 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wide variety of applications ranging from microelectronics to turbines for propulsion and power generation rely on films, coatings, and multilayers to improve performance. As such, the ability to predict coating failure - such as delamination (debonding), mud-cracking, blistering, crack kinking, and the like - is critical to component design and development. This work compiles and organizes decades of research that established the theoretical foundation for predicting such failure mechanisms, and clearly outlines the methodology needed to predict performance. Detailed coverage of cracking in multilayers is provided, with an emphasis on the role of differences in thermoelastic properties between the layers. The comprehensive theoretical foundation of the book is complemented by easy-to-use analysis codes designed to empower novices with the tools needed to simulate cracking; these codes enable not only precise quantitative reproduction of results presented graphically in the literature, but also the generation of new results for more complex multilayered systems.
Download or read book Developments in High Temperature Corrosion and Protection of Materials written by W Gao and published by Elsevier. This book was released on 2008-04-09 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: High temperature corrosion is a phenomenon that occurs in components that operate at very high temperatures, such as gas turbines, jet engines and industrial plants. Engineers are constantly striving to understand and prevent this type of corrosion. This book examines the latest developments in the understanding of high temperature corrosion processes and protective oxide scales and coatings.Part one looks at high temperature corrosion. Chapters cover diffusion and solid state reactions, external and internal oxidation of alloys, metal dusting corrosion, tribological degradation, hot corrosion, and oxide scales on hot-rolled steel strips. Modern techniques for analysing high temperature oxidation and corrosion are also discussed. Part two discusses methods of protection using ceramics, composites, protective oxide scales and coatings. Chapters focus on layered ternary ceramics, alumina scales, Ti-Al intermetallic compounds, metal matrix composites, chemical vapour deposited silicon carbide, nanocrystalline coatings and thermal barrier coatings. Part three provides case studies illustrating some of the challenges of high temperature corrosion to industry and how they can be overcome. Case studies include the petrochemical industry, modern incinerators and oxidation processing of electronic materials.This book is a valuable reference tool for engineers who develop heat resistant materials, mechanical engineers who design and maintain high temperature equipment and plant, and research scientists and students who study high temperature corrosion and protection of materials. - Describes the latest developments in understanding high temperature corrosion - Presents the latest research by the leading innovators from around the globe - Case studies are provided to illustrate key points
Download or read book Inorganic and Organic Thin Films written by Yu Song and published by John Wiley & Sons. This book was released on 2021-07-19 with total page 771 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn more about foundational and advanced topics in polymer thin films and coatings besides species with this powerful two-volume resource The two-volume Inorganic and Organic Thin Films: Fundamentals, Fabrication, and Applications delivers a foundational resource for current researchers and commercial users involved in the design and fabrication of thin films. The book offers newcomers to the field a thorough description of new design theory, fabrication methods, and applications of advanced thin films. Readers will discover the physics and chemistry underlying the manufacture of new thin films and coatings in this leading new resource that promises to become a handbook for future applications of the technology. This one-stop reference brings together all important aspects of inorganic and polymeric thin films and coatings, including construction, assembly, deposition, functionality, patterning, and characterization. Explorations of their applications in industries as diverse as information technology, new energy, biomedical engineering, aerospace, and oceanographic engineering round out this fulsome exploration of one of the most exciting and rapidly developing areas of scientific and industrial research today. Readers will also learn from: A comprehensive introduction to the progress of thin films and coatings as well as fundamentals in functional thin films and coatings An exploration of multi-layered magnetic thin films for electron transport control and signal sensing, including giant magnetoresistance, colossal magnetoresistance, tunneling magnetoresistance, and the quantum anomalous Holzer effect An in time summary of high-quality magneto-optics, nanophotonics, spin waves and spintronics using bismuth-substituted iron garnet thin films as examples A thorough discussion of template-assisted fabrication of nanostructure thin films for ultrasensitive detection of chemicals and biomolecules A treatment of biomass derived functional films and coatings Perfect for materials scientists and inorganic chemists, Inorganic and Organic Thin Films will also earn a place in the libraries of solid state physicists and physical chemists working in private industry, as well as polymer and surface chemists who seek to improve their understanding of thin films and coatings.
Download or read book Polymer Based Composites written by V. Arumugaprabu and published by CRC Press. This book was released on 2021-08-23 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing use of composite materials over conventional materials has been a continual trend for over a decade. While the fundamental understanding of fiber reinforcement has not changed, many new material advancements have occurred, especially in manufacturing methods, and there is an ever-growing number of composite material applications across various industries. Polymer-Based Composites: Design, Manufacturing, and Applications presents the concepts and methods involved in the development of various fiber-reinforced composite materials. Features: Offers a comprehensive view of materials, mechanics, processing, design, and applications Bridges the gap between research, manufacturing science, and analysis and design Discusses composite materials composed of continuous synthetic fibers and matrices for use in engineering structures Presents codes and standards related to fiber-reinforced polymer composites Includes case studies and examples based on industrial, automotive, aerospace, and household applications This book is a valuable resource for advanced students, researchers, and industry personnel to understand recent advances in the field and achieve practical results in the development, manufacture, and application of advanced composite materials.
Download or read book Mechanical Properties of Ceramics written by John B. Wachtman and published by John Wiley & Sons. This book was released on 2009-08-13 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive and Self-Contained Treatment of the Theory and Practical Applications of Ceramic Materials When failure occurs in ceramic materials, it is often catastrophic, instantaneous, and total. Now in its Second Edition, this important book arms readers with a thorough and accurate understanding of the causes of these failures and how to design ceramics for failure avoidance. It systematically covers: Stress and strain Types of mechanical behavior Strength of defect-free solids Linear elastic fracture mechanics Measurements of elasticity, strength, and fracture toughness Subcritical crack propagation Toughening mechanisms in ceramics Effects of microstructure on toughness and strength Cyclic fatigue of ceramics Thermal stress and thermal shock in ceramics Fractography Dislocation and plastic deformation in ceramics Creep and superplasticity of ceramics Creep rupture at high temperatures and safe life design Hardness and wear And more While maintaining the first edition's reputation for being an indispensable professional resource, this new edition has been updated with sketches, explanations, figures, tables, summaries, and problem sets to make it more student-friendly as a textbook in undergraduate and graduate courses on the mechanical properties of ceramics.
Download or read book Thermal Spray Coatings written by Lalit Thakur and published by CRC Press. This book was released on 2021-11-03 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the latest information about the research being conducted and established solutions available in the field of thermal spray coatings for various engineering applications. The readers of this book will be mainly the graduates, engineers and researchers who are pursuing their carrier in the field of thermal spraying. This book will cover the studies and research works of reputed scientists and engineers who have developed thermal spray coatings for thermal protection, bio-implants, renewal energy, wear and corrosion in hydraulic turbines and jet engines, hydrophobic surfaces etc. Hence, the book serves as a valuable resource of latest advancement in thermal spray technology and consolidated references for aspirants and professionals of surface engineering community. The book covers following topics for different industrial applications: Introduction: Historical developments, Science and Engineering aspects of thermal spray coating technology and different thermal spray coatings techniques and its comparison with other fabrication processes. Recent advancements and applications of thermal spray coatings Cold spray technology for additive manufacturing. High-temperature corrosion and erosion resistant coatings and thermal barrier coatings for power plants, automotive sector, and jet engines. Erosion and corrosion-resistant coatings for hydro-power plants, offshore, chemical and oil industries. Bio-coatings for human body implants. Thermal spray coating for super-hydrophobic surface. 3. Case study of boiler tubes failure and prevention by thermal spray coatings.
Download or read book Metallurgical and Ceramic Protective Coatings written by K.H. Stern and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface engineering is an increasingly important field and consequently those involved need to be aware of the vast range of technologies available to modify surfaces. This text provides an up-to-date, authoritative exposition of the major condensed phase methods used for producing metallurgical and ceramic coatings. Each method is discussed thoroughly by an expert in that field. In each chapter the principle of the method, its range of applications and technical aspects involved are described. The book not only informs the reader about established technologies familiar only to specialists, but also details activity on the frontier of coating technology providing an insight into those potential technologies not yet fully developed but which should emerge in the near future.
Download or read book Science and Technology of Thermal Barrier Coatings written by Yeon-Gil Jung and published by MDPI. This book was released on 2021-03-05 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: TBC materials in the hot components of a gas turbine are exposed to extremely harsh environments. Therefore, the evaluation of various environmental factors in applying new TBCs is essential. Understanding the mechanisms for degradation which occur in comprehensive environments plays an important role in preventing it and improving the lifetime performance. The development of novel coating techniques can also have a significant impact on lifetime performance as they can alter the microstructure of the coating and alter the various properties resulting from it. This Special Issue presents an original research paper that reports the development of novel TBCs, particularly the application of advanced deposition techniques and novel materials.
Download or read book Production Properties and Applications of High Temperature Coatings written by Pakseresht, Amir Hossein and published by IGI Global. This book was released on 2018-01-12 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat resistant layers are meant to withstand high temperatures while also protecting against all types of corrosion and oxidation. Therefore, the micro-structure and behavior of such layers is essential in understanding the functionality of these materials in order to make improvements. Production, Properties, and Applications of High Temperature Coatings is a critical academic publication which examines the methods of creation, characteristics, and behavior of materials used in heat resistant layers. Featuring coverage on a wide range of topics such as, thermal spray methods, sol-gel coatings, and surface nanoengineering, this book is geared toward students, academicians, engineers, and researchers seeking relevant research on the methodology and materials for producing effective heat resistant layers.
Download or read book Progress in Thermal Barrier Coatings written by ACerS (American Ceramics Society, The) and published by John Wiley & Sons. This book was released on 2009-06-15 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition of the Progress in Ceramic Technology series compiles articles published on thermal barrier coatings (TBCs) by The American Ceramic Society (ACerS). It collects in one resource the current research papers on materials-related aspects of thermal barrier coatings and associated technologies. Logically organized and carefully selected, the papers in this edition divide into six categories: Applications Material Improvements and Novel Compositions Developments in Processing Mechanical Properties Thermal Properties Citations follow each title in the table of contents, making this a key resource for professionals and academia.
