Download or read book An Optimization Technique Using the Finite Element Method and Orthogonal Arrays written by Stuart H. Young and published by . This book was released on 1996-09-01 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this research was to develop an optimization technique that can be used interactively by design engineers to approach an optimal design with minimal computational effort. The technique can be applied to both continuous and discrete values of design variables. A large number of design variables can be also considered. In order to meet the objective, an optimization procedure was developed by coupling the finite element analysis (FEA) to the orthogonal array experimentation technique, because FEA is a common analysis tool for design engineers. From the results of the FEA and an orthogonal array, an average Jacobian matrix was constructed that showed the average overall sensitivity of the design variables. These sensitivities were then used to optimize the design parameters. The process could then be repeated at the discretion of the engineer until a satisfactory design is obtained. In general, the designer can predict and control the number of FEA calculations before an optimization process so that one can plan a budget and time for an optimal design. Some examples of structural optimization with truss and frame structures with continuous and discrete values of design variables were studied using the technique developed in this paper. Their optimal solutions were found with a small number of iterations.
Download or read book Optimization and Inverse Problems in Electromagnetism written by Marek Rudnicki and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: From 12 to 14 September 2002, the Academy of Humanities and Economics (AHE) hosted the workshop "Optimization and Inverse Problems in Electromagnetism". After this bi-annual event, a large number of papers were assembled and combined in this book. During the workshop recent developments and applications in optimization and inverse methodologies for electromagnetic fields were discussed. The contributions selected for the present volume cover a wide spectrum of inverse and optimal electromagnetic methodologies, ranging from theoretical to practical applications. A number of new optimal and inverse methodologies were proposed. There are contributions related to dedicated software. Optimization and Inverse Problems in Electromagnetism consists of three thematic chapters, covering: -General papers (survey of specific aspects of optimization and inverse problems in electromagnetism), -Methodologies, -Industrial Applications. The book can be useful to students of electrical and electronics engineering, computer science, applied mathematics (PhD level) and to researchers interested in the topic.
Download or read book Finite Element Model Updating Using Computational Intelligence Techniques written by Tshilidzi Marwala and published by Springer Science & Business Media. This book was released on 2010-06-04 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: FEM updating allows FEMs to be tuned better to reflect measured data. It can be conducted using two different statistical frameworks: the maximum likelihood approach and Bayesian approaches. This book applies both strategies to the field of structural mechanics, using vibration data. Computational intelligence techniques including: multi-layer perceptron neural networks; particle swarm and GA-based optimization methods; simulated annealing; response surface methods; and expectation maximization algorithms, are proposed to facilitate the updating process. Based on these methods, the most appropriate updated FEM is selected, a problem that traditional FEM updating has not addressed. This is found to incorporate engineering judgment into finite elements through the formulations of prior distributions. Case studies, demonstrating the principles test the viability of the approaches, and. by critically analysing the state of the art in FEM updating, this book identifies new research directions.
Download or read book Analytic Methods for Design Practice written by Gyung-Jin Park and published by Springer Science & Business Media. This book was released on 2007-05-31 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the world of modern engineering, rigorous and definite design methodologies are needed. However, many parts of engineering design are performed in either an ad-hoc manner or based on the intuition of the engineer. This is the first book to look at both stages of the design process – conceptual design and detailed design – and detail design methodologies for every step of the design process. Case studies show how practical design problems can be solved with analytic design methods. This book is an excellent introduction to the subject. The book’s practical focus will make the book useful to practicing engineers as a practical handbook of design.
Download or read book Computational Methods for Optimizing Manufacturing Technology Models and Techniques written by Davim, J. Paulo and published by IGI Global. This book was released on 2012-02-29 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book contains the latest research developments in manufacturing technology and its optimization, and demonstrates the fundamentals of new computational approaches and the range of their potential application"--Provided by publisher.
Download or read book Optimization of Manufacturing Processes written by Kapil Gupta and published by Springer. This book was released on 2019-06-25 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed understanding of optimization methods as they are implemented in a variety of manufacturing, fabrication and machining processes. It covers the implementation of statistical methods, multi-criteria decision making methods and evolutionary techniques for single and multi-objective optimization to improve quality, productivity, and sustainability in manufacturing. It reports on the theoretical aspects, special features, recent research and latest development in the field. Optimization of Manufacturing Processes is a valuable source of information for researchers and practitioners, as it fills the gap where no dedicated book is available on intelligent manufacturing/modeling and optimization in manufacturing. Readers will develop an understanding of the implementation of statistical and evolutionary techniques for modeling and optimization in manufacturing.
Download or read book Handbook of Research on Applied Optimization Methodologies in Manufacturing Systems written by Faruk Y?lmaz, Ömer and published by IGI Global. This book was released on 2017-11-30 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today’s manufacturing systems are undergoing significant changes in the aspects of planning, production execution, and delivery. It is imperative to stay up-to-date on the latest trends in optimization to efficiently create products for the market. The Handbook of Research on Applied Optimization Methodologies in Manufacturing Systems is a pivotal reference source including the latest scholarly research on heuristic models for solving manufacturing and supply chain related problems. Featuring exhaustive coverage on a broad range of topics such as assembly ratio, car sequencing, and color constraints, this publication is ideally designed for practitioners seeking new comprehensive models for problem solving in manufacturing and supply chain management.
Download or read book FlexPDE and Finite Element Method Applications in Thermal Energy Storage and Cavities written by Hosseinzadeh, Khashayar and published by IGI Global. This book was released on 2024-03-01 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Academic scholars are increasingly confronted with the complex challenges of understanding and optimizing heat transfer processes, particularly in the areas of cavities and Phase Change Materials (PCM). These issues are central to a range of crucial applications, including building systems, electronic equipment, and the harnessing of solar energy. The need for innovative solutions to enhance heat transfer efficiency is more pressing than ever, and a comprehensive resource to guide scholars through these complexities is essential. FlexPDE and Finite Element Method Applications in Thermal Energy Storage and Cavities is research book specifically designed to provide scholars with the knowledge and expertise necessary to navigate the complexities of heat transfer issues. With a strong emphasis on practical application, the book leverages the capabilities of the Finite Element Method (FEM) through the FLEXPDE software, making it a valuable resource for those seeking innovative solutions to problems in heat transfer.
Download or read book Recent Advances in Solids structures and Application of Metallic Materials written by and published by . This book was released on 1996 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Engineering in Applied Electromagnetism written by Slawomir Wiak and published by Springer Science & Business Media. This book was released on 2006-06-07 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Engineering in Applied Electromagnetism contains papers which were presented at the International Symposium on Electromagnetic Fields in Electrical Engineering, held in Maribor, Slovenia, 18-20 September 2003. It consists of three parts, Computational Techniques, Electromagnetic Engineering, and Special Applications. The contributions selected for the book cover a wide spectrum of theory and practice, being simultaneously of high theoretical level and deeply rooted in engineering problems. Thus, this volume touches on what is of key importance in electromagnetism.
Download or read book Computational Methods for the Innovative Design of Electrical Devices written by Slawomir Wiak and published by Springer. This book was released on 2010-10-21 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Methods for the Innovative Design of Electrical Devices is entirely focused on the optimal design of various classes of electrical devices. Emerging new methods, like e.g. those based on genetic algorithms, are presented and applied in the design optimization of different devices and systems. Accordingly, the solution to field analysis problems is based on the use of finite element method, and analytical methods as well. An original aspect of the book is the broad spectrum of applications in the area of electrical engineering, especially electrical machines. This way, traditional design criteria of conventional devices are revisited in a critical way, and some innovative solutions are suggested. In particular, the optimization procedures developed are oriented to three main aspects: shape design, material properties identification, machine optimal behaviour. Topics covered include: • New parallel finite-element solvers • Response surface method • Evolutionary computing • Multiobjective optimization • Swarm intelligence • MEMS applications • Identification of magnetic properties of anisotropic laminations • Neural networks for non-destructive testing • Brushless DC motors, transformers • Permanent magnet disc motors, magnetic separators • Magnetic levitation systems
Download or read book Automated Solution of Differential Equations by the Finite Element Method written by Anders Logg and published by Springer Science & Business Media. This book was released on 2012-02-24 with total page 723 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a tutorial written by researchers and developers behind the FEniCS Project and explores an advanced, expressive approach to the development of mathematical software. The presentation spans mathematical background, software design and the use of FEniCS in applications. Theoretical aspects are complemented with computer code which is available as free/open source software. The book begins with a special introductory tutorial for beginners. Following are chapters in Part I addressing fundamental aspects of the approach to automating the creation of finite element solvers. Chapters in Part II address the design and implementation of the FEnicS software. Chapters in Part III present the application of FEniCS to a wide range of applications, including fluid flow, solid mechanics, electromagnetics and geophysics.
Download or read book Proceedings of the 3rd Annual International Conference on Material Machines and Methods for Sustainable Development MMMS2022 written by Banh Tien Long and published by Springer Nature. This book was released on 2023-08-29 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected, peer-reviewed proceedings of the 3rd International Conference on Material, Machines and Methods for Sustainable Development (MMMS2022), held in the city of Can Tho, Vietnam, from 10 to 13 November 2022. The purpose of the conference is to explore and ensure an understanding of the critical aspects contributing to sustainable development with a focus on advanced mechanical engineering, automation, materials, machines and methods. The contributions published in this book come from authors representing universities, research institutes and industrial companies and reflect the results of a very broad spectrum of research, from micro- and nanoscale materials design and processing, to mechanical engineering technology in industry. Many of the contributions selected for these proceedings focus on materials modeling, eco-material processes and mechanical manufacturing. Volume 1 of this book focuses on topics dedicated to advanced materials and manufacturing technologies, ranging from synthesis of new materials to sustainable development manufacturing technology.
Download or read book Computational Fluid and Solid Mechanics 2003 written by K.J Bathe and published by Elsevier. This book was released on 2003-06-02 with total page 2485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together the world's leading researchers and practitioners of computational mechanics, these new volumes meet and build on the eight key challenges for research and development in computational mechanics. Researchers have recently identified eight critical research tasks facing the field of computational mechanics. These tasks have come about because it appears possible to reach a new level of mathematical modelling and numerical solution that will lead to a much deeper understanding of nature and to great improvements in engineering design.The eight tasks are: The automatic solution of mathematical models Effective numerical schemes for fluid flows The development of an effective mesh-free numerical solution method The development of numerical procedures for multiphysics problems The development of numerical procedures for multiscale problems The modelling of uncertainties The analysis of complete life cycles of systems Education - teaching sound engineering and scientific judgement Readers of Computational Fluid and Solid Mechanics 2003 will be able to apply the combined experience of many of the world's leading researchers to their own research needs. Those in academic environments will gain a better insight into the needs and constraints of the industries they are involved with; those in industry will gain a competitive advantage by gaining insight into the cutting edge research being carried out by colleagues in academia. Features Bridges the gap between academic researchers and practitioners in industry Outlines the eight main challenges facing Research and Design in Computational mechanics and offers new insights into the shifting the research agenda Provides a vision of how strong, basic and exciting education at university can be harmonized with life-long learning to obtain maximum value from the new powerful tools of analysis
Download or read book Simultaneous Engineering written by U. Roy and published by CRC Press. This book was released on 1999-05-11 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers recent advances in simultaneous engineering and contemporary issues related to the development and implementation of successful systems. The scope of material includes recent research related to simultaneous engineering problem-solving architectures, organizational issues, tools and techniques of simultaneous engineering, design methods, and application of artificial intelligence and numeric tools.
Download or read book Continuous Improvement written by and published by . This book was released on 1992 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analytical And Experimental Evaluation Of Flange Wrinkling In Sheet Metal Forming written by Dr B V S rao and published by Archers & Elevators Publishing House. This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
