Download or read book An Introduction to System Modeling and Control written by John Chiasson and published by John Wiley & Sons. This book was released on 2022-03-22 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical and straightforward exploration of the basic tools for the modeling, analysis, and design of control systems In An Introduction to System Modeling and Control, Dr. Chiasson delivers an accessible and intuitive guide to understanding modeling and control for students in electrical, mechanical, and aerospace/aeronautical engineering. The book begins with an introduction to the need for control by describing how an aircraft flies complete with figures illustrating roll, pitch, and yaw control using its ailerons, elevators, and rudder, respectively. The book moves on to rigid body dynamics about a single axis (gears, cart rolling down an incline) and then to modeling DC motors, DC tachometers, and optical encoders. Using the transfer function representation of these dynamic models, PID controllers are introduced as an effective way to track step inputs and reject constant disturbances. It is further shown how any transfer function model can be stabilized using output pole placement and on how two-degree of freedom controllers can be used to eliminate overshoot in step responses. Bode and Nyquist theory are then presented with an emphasis on how they give a quantitative insight into a control system's robustness and sensitivity. An Introduction to System Modeling and Control closes with chapters on modeling an inverted pendulum and a magnetic levitation system, trajectory tracking control using state feedback, and state estimation. In addition the book offers: A complete set of MATLAB/SIMULINK files for examples and problems included in the book. A set of lecture slides for each chapter. A solutions manual with recommended problems to assign. An analysis of the robustness and sensitivity of four different controller designs for an inverted pendulum (cart-pole). Perfect for electrical, mechanical, and aerospace/aeronautical engineering students, An Introduction to System Modeling and Control will also be an invaluable addition to the libraries of practicing engineers.
Download or read book System Modeling and Simulation written by Frank L. Severance and published by John Wiley & Sons. This book was released on 2001-08-08 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text teaches, by example, how to create models, simulate performance simulations and analyse results. It takes a quantitative approach and covers a range of event driven and time driven models. In addition it is software independent - to make implementations as generic as possible, which allows for experimentation with different implementations. * Includes 100 worked examples * Incorporates a number of disciplines in modeling process * Algorithms and programs available on associated web site
Download or read book Introduction to Modeling and Control of Internal Combustion Engine Systems written by Lino Guzzella and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Internal combustion engines still have a potential for substantial improvements, particularly with regard to fuel efficiency and environmental compatibility. These goals can be achieved with help of control systems. Modeling and Control of Internal Combustion Engines (ICE) addresses these issues by offering an introduction to cost-effective model-based control system design for ICE. The primary emphasis is put on the ICE and its auxiliary devices. Mathematical models for these processes are developed in the text and selected feedforward and feedback control problems are discussed. The appendix contains a summary of the most important controller analysis and design methods, and a case study that analyzes a simplified idle-speed control problem. The book is written for students interested in the design of classical and novel ICE control systems.
Download or read book Power System Modeling Computation and Control written by Joe H. Chow and published by John Wiley & Sons. This book was released on 2020-01-21 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides students with an understanding of the modeling and practice in power system stability analysis and control design, as well as the computational tools used by commercial vendors Bringing together wind, FACTS, HVDC, and several other modern elements, this book gives readers everything they need to know about power systems. It makes learning complex power system concepts, models, and dynamics simpler and more efficient while providing modern viewpoints of power system analysis. Power System Modeling, Computation, and Control provides students with a new and detailed analysis of voltage stability; a simple example illustrating the BCU method of transient stability analysis; and one of only a few derivations of the transient synchronous machine model. It offers a discussion on reactive power consumption of induction motors during start-up to illustrate the low-voltage phenomenon observed in urban load centers. Damping controller designs using power system stabilizer, HVDC systems, static var compensator, and thyristor-controlled series compensation are also examined. In addition, there are chapters covering flexible AC transmission Systems (FACTS)—including both thyristor and voltage-sourced converter technology—and wind turbine generation and modeling. Simplifies the learning of complex power system concepts, models, and dynamics Provides chapters on power flow solution, voltage stability, simulation methods, transient stability, small signal stability, synchronous machine models (steady-state and dynamic models), excitation systems, and power system stabilizer design Includes advanced analysis of voltage stability, voltage recovery during motor starts, FACTS and their operation, damping control design using various control equipment, wind turbine models, and control Contains numerous examples, tables, figures of block diagrams, MATLAB plots, and problems involving real systems Written by experienced educators whose previous books and papers are used extensively by the international scientific community Power System Modeling, Computation, and Control is an ideal textbook for graduate students of the subject, as well as for power system engineers and control design professionals.
Download or read book Modeling Analysis and Control of Dynamic Systems written by William John Palm and published by . This book was released on 1983-01-28 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: An integrated presentation of both classical and modern methods of systems modeling, response and control. Includes coverage of digital control systems. Details sample data systems and digital control. Provides numerical methods for the solution of differential equations. Gives in-depth information on the modeling of physical systems and central hardware.
Download or read book Control System Design written by Bernard Friedland and published by Courier Corporation. This book was released on 2012-03-08 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to state-space methods covers feedback control; state-space representation of dynamic systems and dynamics of linear systems; frequency-domain analysis; controllability and observability; shaping the dynamic response; more. 1986 edition.
Download or read book Introduction to Hybrid Vehicle System Modeling and Control written by Wei Liu and published by John Wiley & Sons. This book was released on 2013-02-08 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an engineering reference book on hybrid vehicle system analysis and design, an outgrowth of the author's substantial work in research, development and production at the National Research Council Canada, Azure Dynamics and now General Motors. It is an irreplaceable tool for helping engineers develop algorithms and gain a thorough understanding of hybrid vehicle systems. This book covers all the major aspects of hybrid vehicle modeling, control, simulation, performance analysis and preliminary design. It not only systemically provides the basic knowledge of hybrid vehicle system configuration and main components, but also details their characteristics and mathematic models. Provides valuable technical expertise necessary for building hybrid vehicle system and analyzing performance via drivability, fuel economy and emissions Built from the author's industry experience at major vehicle companies including General Motors and Azure Dynamics Inc. Offers algorithm implementations and figures/examples extracted from actual practice systems Suitable for a training course on hybrid vehicle system development with supplemental materials An essential resource enabling hybrid development and design engineers to understand the hybrid vehicle systems necessary for control algorithm design and developments.
Download or read book Dynamic Modeling and Control of Engineering Systems written by Bohdan T. Kulakowski and published by Cambridge University Press. This book was released on 2007-07-02 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is ideal for an undergraduate course in Engineering System Dynamics and Controls. It is intended to provide the reader with a thorough understanding of the process of creating mathematical (and computer-based) models of physical systems. The material is restricted to lumped parameter models, which are those models in which time is the only independent variable. It assumes a basic knowledge of engineering mechanics and ordinary differential equations. The new edition has expanded topical coverage and many more new examples and exercises.
Download or read book Feedback Systems written by Karl Johan Åström and published by Princeton University Press. This book was released on 2021-02-02 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The essential introduction to the principles and applications of feedback systems—now fully revised and expanded This textbook covers the mathematics needed to model, analyze, and design feedback systems. Now more user-friendly than ever, this revised and expanded edition of Feedback Systems is a one-volume resource for students and researchers in mathematics and engineering. It has applications across a range of disciplines that utilize feedback in physical, biological, information, and economic systems. Karl Åström and Richard Murray use techniques from physics, computer science, and operations research to introduce control-oriented modeling. They begin with state space tools for analysis and design, including stability of solutions, Lyapunov functions, reachability, state feedback observability, and estimators. The matrix exponential plays a central role in the analysis of linear control systems, allowing a concise development of many of the key concepts for this class of models. Åström and Murray then develop and explain tools in the frequency domain, including transfer functions, Nyquist analysis, PID control, frequency domain design, and robustness. Features a new chapter on design principles and tools, illustrating the types of problems that can be solved using feedback Includes a new chapter on fundamental limits and new material on the Routh-Hurwitz criterion and root locus plots Provides exercises at the end of every chapter Comes with an electronic solutions manual An ideal textbook for undergraduate and graduate students Indispensable for researchers seeking a self-contained resource on control theory
Download or read book Hybrid Electric Vehicle System Modeling and Control written by Wei Liu and published by John Wiley & Sons. This book was released on 2017-04-17 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition includes approximately 30% new materials covering the following information that has been added to this important work: extends the contents on Li-ion batteries detailing the positive and negative electrodes and characteristics and other components including binder, electrolyte, separator and foils, and the structure of Li-ion battery cell. Nickel-cadmium batteries are deleted. adds a new section presenting the modelling of multi-mode electrically variable transmission, which gradually became the main structure of the hybrid power-train during the last 5 years. newly added chapter on noise and vibration of hybrid vehicles introduces the basics of vibration and noise issues associated with power-train, driveline and vehicle vibrations, and addresses control solutions to reduce the noise and vibration levels. Chapter 10 (chapter 9 of the first edition) is extended by presenting EPA and UN newly required test drive schedules and test procedures for hybrid electric mileage calculation for window sticker considerations. In addition to the above major changes in this second edition, adaptive charging sustaining point determination method is presented to have a plug-in hybrid electric vehicle with optimum performance.
Download or read book Modeling for All Scales written by Howard T. Odum and published by Elsevier. This book was released on 2000-02-03 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: All manner of models are used to describe, simulate, extrapolate, and ultimately understand the function of dynamic systems. These sorts of models are usually based upon a mathematical foundation that can be difficult to manipulate especially for students. Modeling for All Scales uses object-oriented programming to erect and evaluate the efficacy of models of small, intermediate and large scale systems. Such models allow users to employ intuitively based symbols and a systems ecology approach. The authors have been leaders in the systems ecology community and have originated much of the scientific vocabulary of the field. After introducing modeling and its benefits, there is a series of chapters detailing the more particular elements of successful simulation. There follows another series of chapters, each devoted to models of different sorts of systems. Small scale models of growth, competition, and evolution give way, successively, to larger and larger scale models such as international trade and the global geobiosphere. Anyone interested in an easy to use approach to modeling complex systems authored by perhaps the most original systems ecologists of the century will want this book. To further enhance the users ability to apply the lessons of this book, there is included a CD-ROM disc which provides the fundamental tools for modeling at all scales. Key Features * The book makes it possible to teach modeling and simulation without much prior knowledge of mathematics * Reasons for modeling and simulation are discussed * The book makes modeling and simulation fun by keeping focused on simplified overview minimodels that have important principles to science and society * The steps in successive chapters are arranged so that readers can teach themselves modeling, simulation, and the programming necessary to simulate the systems they diagram * The CD-ROM has minimodel programs and versions of QuickBasic and EXTEND to run them
Download or read book Dynamic Systems written by Craig A. Kluever and published by Wiley Global Education. This book was released on 2019-12-24 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The simulation of complex, integrated engineering systems is a core tool in industry which has been greatly enhanced by the MATLAB® and Simulink® software programs. The second edition of Dynamic Systems: Modeling, Simulation, and Control teaches engineering students how to leverage powerful simulation environments to analyze complex systems. Designed for introductory courses in dynamic systems and control, this textbook emphasizes practical applications through numerous case studies—derived from top-level engineering from the AMSE Journal of Dynamic Systems. Comprehensive yet concise chapters introduce fundamental concepts while demonstrating physical engineering applications. Aligning with current industry practice, the text covers essential topics such as analysis, design, and control of physical engineering systems, often composed of interacting mechanical, electrical, and fluid subsystem components. Major topics include mathematical modeling, system-response analysis, and feedback control systems. A wide variety of end-of-chapter problems—including conceptual problems, MATLAB® problems, and Engineering Application problems—help students understand and perform numerical simulations for integrated systems.
Download or read book System Modeling and Control with Resource Oriented Petri Nets written by MengChu Zhou and published by CRC Press. This book was released on 2018-09-03 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petri nets are widely used in modeling, analysis, and control of discrete event systems arising from manufacturing, transportation, computer and communication networks, and web service systems. However, Petri net models for practical systems can be very large, making it difficult to apply such models to real-life problems. System Modeling and Control with Resource-Oriented Petri Nets introduces a new resource-oriented Petri net (ROPN) model that was developed by the authors. Not only does it successfully reduce model size, but it also offers improvements that facilitate effective modeling, analysis, and control of automated and reconfigurable manufacturing systems. Presenting the latest research in this novel approach, this cutting-edge volume provides proven theories and methodologies for implementing cost and time-saving improvements to contemporary manufacturing systems. It provides effective tools for deadlock avoidance—deadlock-free routing and deadlock-free scheduling. The authors supply simple and complex industrial manufacturing system examples to illustrate time-tested concepts, theories, and approaches for solving real-life application problems. Written in a clear and concise manner, the text covers applications to automated and reconfigurable manufacturing systems, automated guided vehicle (AGV) systems, semiconductor manufacturing systems, and flexible assembly systems. Explaining complex concepts in a manner that is easy to understand, the authors provide the understanding and tools needed for more effective modeling, analysis, performance evaluation, control, and scheduling of engineering processes that will lead to more flexible and efficient manufacturing systems.
Download or read book Introduction to Modeling Biological Cellular Control Systems written by Weijiu Liu and published by Springer Science & Business Media. This book was released on 2012-04-26 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook contains the essential knowledge in modeling, simulation, analysis, and applications in dealing with biological cellular control systems. In particular, the book shows how to use the law of mass balance and the law of mass action to derive an enzyme kinetic model - the Michaelis-Menten function or the Hill function, how to use a current-voltage relation, Nernst potential equilibrium equation, and Hodgkin and Huxley's models to model an ionic channel or pump, and how to use the law of mass balance to integrate these enzyme or channel models into a complete feedback control system. The book also illustrates how to use data to estimate parameters in a model, how to use MATLAB to solve a model numerically, how to do computer simulations, and how to provide model predictions. Furthermore, the book demonstrates how to conduct a stability and sensitivity analysis on a model.
Download or read book Modeling and Control of Complex Systems written by Petros A. Ioannou and published by CRC Press. This book was released on 2007-12-26 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehension of complex systems comes from an understanding of not only the behavior of constituent elements but how they act together to form the behavior of the whole. However, given the multidisciplinary nature of complex systems, the scattering of information across different areas creates a chaotic situation for those trying to understand pos
Download or read book System Modeling and Control written by J. Schwarzenbach and published by . This book was released on 1918 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guide to Modeling and Simulation of Systems of Systems written by Bernard Zeigler and published by Springer Science & Business Media. This book was released on 2012-10-22 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: This user’s reference is a companion to the separate book also titled “Guide to Modelling and Simulation of Systems of Systems.” The principal book explicates integrated development environments to support virtual building and testing of systems of systems, covering in some depth the MS4 Modelling EnvironmentTM. This user’s reference provides a quick reference and exposition of the various concepts and functional features covered in that book. The topics in the user’s reference are grouped in alignment with the workflow displayed on the MS4 Modeling EnvironmentTM launch page, under the headings Atomic Models, System Entity Structure, Pruning SES, and Miscellaneous. For each feature, the reference discusses why we use it, when we should use it, and how to use it. Further comments and links to related features are also included.