Download or read book An Introduction to Stud Wall and Precast Concrete Building Envelope Systems written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2021-08-01 with total page 29 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil engineers, structural engineers and architectural engineers interested in building envelope wall systems. Here is what is discussed: 1. METAL STUD WALLS 2. PRECAST CONCRETE PANELS.
Download or read book An Introduction to Metal Stud Precast Concrete and Stone Panel Building Wall Systems written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2021-06-23 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil engineers, structural engineers, architectural engineers and construction managers interested in building wall systems. Here is what is discussed: 1. METAL STUD WALLS 2. PRECAST CONCRETE PANELS 3. STONE PANELS.
Download or read book Prefabricated Systems written by Ulrich Knaack and published by Walter de Gruyter. This book was released on 2012-12-13 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a number of years, modular construction – the use of prefabricated elements in architecture – has once again become a subject of lively discussion and debate. Long written off as monotonous, today’s building components are actually highly differentiated and capable of supporting and enhancing the architect’s creativity. Numerous structures work with prefabricated components; for single-family homes the figure is ninety-eight percent, and modular systems are available that meet high aesthetic standards. This book provides an overview of the various different systems and their possible uses, particularly in the areas of housing, office, and industrial buildings. It explains the processes and components of modular construction and the behavior of the various materials when this construction approach is used. The authors offer strategies for planning and designing with prefabricated systems so that the architect can use them productively. Numerous drawings explain the principles of modular construction, while built examples forge a link between those principles and the practical activity of building.
Download or read book An Introduction to Design of Building Envelopes for Professional Engineers written by J. Paul Guyer and published by Guyer Partners. This book was released on 2024-01-19 with total page 91 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for professional engineers and construction managers interested in design and construction of building enclosure walls. Here is what is discussed: 1. BUILDING ENVELOPE PERFORMANCE, 2. THERMAL ENVELOPE PERFORMANCE, 3. THERMAL ENVELOPE DEFECTS, 4. DESIGN AND CONSTRUCTION PROCESS., 5. AIR BARRIERS, 6. VAPOR RETARDERS, 7. THERMAL INSULATION, 8. CONTROL OF RAIN PENETRATION, 9. SEALANTS.
Download or read book An Introduction to Design of Building Envelopes for Thermal Efficiency and Airtightness written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2021-07-30 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil engineers, structural engineers, architectural engineers and construction managers interested in sealing exterior building wall systems to prevent air and water leakage and penetration. Here is what is discussed: 1. BUILDING ENVELOPE PERFORMANCE 2. THERMAL ENVELOPE PERFORMANCE 3. THERMAL ENVELOPE DEFECTS 4. DESIGN AND CONSTRUCTION PROCESS. 5. AIR BARRIERS 6. VAPOR RETARDERS 7. THERMAL INSULATION 8. CONTROL OF RAIN PENETRATION 9. SEALANTS.
Download or read book Development of Thermal Envelope Design Guidelines for Federal Office Buildings written by Andrew K. Persily and published by . This book was released on 1990 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: Office building envelopes are generally successful in meeting a range of structural, aesthetic and thermal requirements. However, poor thermal envelope performance will occur when there are discontinuities in the envelope insulation and air barrier systems, such as thermal bridges and air leakage sites. These discontinuities result from designs that do not adequately account for heat, air and moisture transmission, with many thermal defects being associated with inappropriate or inadequate detailing of the connections of envelope components. Despite the existence of these thermal envelope performance problems, information is available to design and construct envelopes that do perform well. In order to close the gap between available knowledge and current practice, the Public Buildings Service of the General Services Administration has entered into an interagency agreement with the Center for Building Technology of the National Institute of Standards and Technology to develop thermal envelope design guidelines for federal office buildings. The goal of this project is to transfer the knowledge on thermal envelope design and performance from the building research, design and construction communities into a form that will be used by building design professionals. This report describes the NIST/GSA envelope design guidelines development at the end of the first year of effort on the project. The effort to this point has consisted of a literature review of research results and technical information on thermal envelope performance and design, an assessment of existing design guidelines as they relate to the thermal envelope, and the development of a format and outline for the design guidelines.
Download or read book An Introduction to Building Envelopes for Professional Engineers written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2023-07-25 with total page 43 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for professional engineers and construction managers interested in design and construction of building envelopes. Here is what is discussed: 1. AIR BARRIERS, 2. VAPOR RETARDERS, 3. THERMAL INSULATION, 4. CONTROL OF RAIN PENETRATION.
Download or read book An Introduction to Biomedical Research Facilities Exterior Envelope Design for Biocontainment written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2021-08-10 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for architectural engineers, architects and construction managers interested in design of biocontainment features for biomedical research facilities. Here is what is discussed: 1. INTRODUCTION 2. GENERAL REQUIREMENTS 3. DOORS.
Download or read book Architectural Stone written by Mark A. Chacon and published by John Wiley & Sons. This book was released on 1999-10-11 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past quarter century has seen a near revolution in the availability, versatility, and cost of architectural stone. Enormous technological advances in fabrication, transportation, and installation have combined with the emergence of new sources of stone in China, India, Southeast Asia, and the former Soviet Union to produce an astounding variety of choices for architects interested in incorporating stone into their designs. But, beyond the visual aesthetic of a sample, how can an architect determine whether a particular stone possesses characteristics suitable for a specific project? This is a crucial question, since an improper selection can cost thousands, or even millions, of dollars to correct. In Architectural Stone, Mark Chacon takes the guesswork out of stone selection, design, and installation. He provides detailed information on geological formation, physical characteristics, and fabrication techniques for igneous, sedimentary, and metamorphic stone, and explains how these factors affect design and installation. Taking a how-to approach, he offers detailed instructions for all major installation techniques and examines the materials, systems, and specifications required for each technique, as well as methods of finishing, sealing, and maintaining installed stone. Finally, he presents detailed guidelines for the selection of stone, including selection criteria and practical concerns, special considerations for interior and exterior installations, informal testing and practical analysis, and the availability and suitability of particular types of stone. The only one-stop source for complete information on building stone, Architectural Stone also provides: * More than 100 field photographs detailing the quarrying, fabrication, and installation of a wide variety of building stone * Architectural details that describe the intent and use of stone in building systems * Computer-generated images of the geological formation of stone The first and only comprehensive reference for owners, architects, interior designers, and other building professionals working with stone, this book provides authoritative, up-to-date answers to critical questions on every aspect of using stone as a building material.
Download or read book Precast Concrete Cladding written by Howard P. J. Taylor and published by . This book was released on 1992 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Construction of Tilt up written by Tilt-Up Concrete Association and published by . This book was released on 2011 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: The newest publication from the Tilt-Up Concrete Association is the second in a planned trilogy of resources covering the architecture, engineering and construction of Tilt-Up. Continuing the high quality with which ¿The Architecture of Tilt-Up¿ was printed and assembled, the new (10¿ x 10¿) book presents state-of-the art information and large colorful imagery of the construction process. Topics include: planning, slabs and foundations, panel layout and forming, reinforcement, inserts and embedded items, placing and finishing of the panels, lifting, setting and bracing of the panels, connections and finishing touches.
Download or read book COST C16 Improving the Quality of Existing Urban Building Envelopes written by M.T. Andeweg and published by IOS Press. This book was released on 2007-04-12 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on a support by COST, an intergovernmental European framework for international cooperation between nationally funded research activities, this work, which is within the COST Transport and Urban Development Domain, looks at improving the techniques for envelopes of buildings constructed in the last half of the 20th century in COST countries.
Download or read book Environmental Life Cycle Costing written by David Hunkeler and published by CRC Press. This book was released on 2008-05-29 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Balances Scientific and Economic Points of View to Thoroughly Address Management Issues Responding to the need for clarification and benchmarks, Environmental Life Cycle Costing provides the fundamental basis on which to establish a definitive methodology. Clearly defining environmental LCC, this book balances scientific and econom
Download or read book Modern Construction Envelopes written by Andrew Watts and published by Birkhäuser. This book was released on 2014-01-21 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Modern Construction Envelopes was originally based on the two books by Andrew Watts, Modern Construction Roofs and Modern Construction Facades . Both volumes were gathered into one single volume and consolidated in terms of content, which permits the consideration of facades and roofs as envelopes. Using current examples by renowned architects, Watts presents the constructive and material-related details. This presentation is based on a text, photos, and standardized detail drawings, as well as 3D representations of the components. The new edition has 3D views that are easier to understand than the first edition, with sharper images and more key explanations.
Download or read book Designing the Exterior Wall written by Linda Brock and published by John Wiley & Sons. This book was released on 2015-11-17 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: By presenting the basics of building science along with a prescribed set of details, Designing the Exterior Wall helps you understand why buildings fail and how they can be made more durable through design. Author Linda Brock connects the science and aesthetics of building envelopes through the examination of a variety of construction and cladding types. She features details from real world projects in a variety of climates, successful and unsuccessful case studies, and checklists you can use on your own projects. Helps you reduce your liability by showing why building envelopes fail and how they can be designed to endure. Moves from theory to actual construction by including hundreds of building envelope details from a broad array of projects and climates. Integrates numerous contemporary case studies, including Frank Gehry's Experiential Music Center in Seattle (thin skins), Renzo Piano's Rue de Meaux housing in Paris (terra cotta cladding), and Mario Botta's San Francisco Museum of Modern Art (prefabricated brick panels). Designing the Exterior Wall is a must-have book, whether you're an architect or a student. Order your copy today.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1981 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fabricate 2024 written by Bob Sheil and published by UCL Press. This book was released on 2024-04-04 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fabricate 2024: Creating Resourceful Futures is the fifth volume in the series of Fabricate publications. The first conference – ‘Making Digital Architecture’ – explored the ways in which technology, design and industry are shaping the world around us. Since then, we have become finely attuned to the negative impacts of this shaping. The 2024 conference, hosted in Copenhagen, sets focus on the pressing need to develop new models for architectural production that rethink how resource is deployed, its intensity, its socio-ecological origins and sensitivity to environment. This book features the work of designers, engineers and makers operating within the built environment. It documents disruptive approaches that reconsider how fabrication can be leveraged to address our collective and entangled challenges of resource scarcity, climate emergency and burgeoning demand. Exploring case studies of completed buildings and works-in-progress, together with interviews with leading thinkers, this edition of Fabricate offers a plurality of tangible models for design and production that set a creative and responsible course towards resourceful futures.
