Download or read book Introduction to Materials Handling written by Siddhartha Ray and published by New Age International Limited Publishers. This book was released on 2007-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written to cover diploma, undergraduate and postgraduate engineering Curricula for Materials Handling courses in India and neighbouring countries. This book can be a ready reference for Materials Handling Equipment Designers, Practising Engineers and Potential buyers. References have been made to various relevant BIS specifications, which will help students/engineers for preparing buying specifications and to design some of the common Materials Handling Equipment. The book contains a representative list of Materials Handling Equipment and System Manufacturers. An exhaustive index has also been provided.

Download or read book Bulk Solids Handling written by C.R. Woodcock and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: An understanding ofthe properties and the handling characteristics of liquids and gases has long been regarded as an essential requirement for most practising engineers. It is therefore not surprising that, over the years, there has been a regular appearance of books dealing with the fundamentals of fluid mechanics, fluid flow, hydraulics and related topics. What is surprising is that there has been no parallel development of the related discipline of Bulk Solids Handling, despite its increasing importance in modern industry across the world. It is only very recently that a structured approach to the teaching, and learning, of the subject has begun to evolve. A reason for the slow emergence of Bulk Solids Handling as an accepted topic of study in academic courses on mechanical, agricultural, chemical, mining and civil engineering is perhaps that the practice is so often taken for granted. Certainly the variety of materials being handled in bulk is almost endless, ranging in size from fine dust to rocks, in value from refuse to gold, and in temperature from deep-frozen peas to near-molten metal.

Download or read book Encyclopedia of Operations Research and Management Science written by Saul I. Gass and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: Operations Research: 1934-1941," 35, 1, 143-152; "British The goal of the Encyclopedia of Operations Research and Operational Research in World War II," 35, 3, 453-470; Management Science is to provide to decision makers and "U. S. Operations Research in World War II," 35, 6, 910-925; problem solvers in business, industry, government and and the 1984 article by Harold Lardner that appeared in academia a comprehensive overview of the wide range of Operations Research: "The Origin of Operational Research," ideas, methodologies, and synergistic forces that combine to 32, 2, 465-475. form the preeminent decision-aiding fields of operations re search and management science (OR/MS). To this end, we The Encyclopedia contains no entries that define the fields enlisted a distinguished international group of academics of operations research and management science. OR and MS and practitioners to contribute articles on subjects for are often equated to one another. If one defines them by the which they are renowned. methodologies they employ, the equation would probably The editors, working with the Encyclopedia's Editorial stand inspection. If one defines them by their historical Advisory Board, surveyed and divided OR/MS into specific developments and the classes of problems they encompass, topics that collectively encompass the foundations, applica the equation becomes fuzzy. The formalism OR grew out of tions, and emerging elements of this ever-changing field. We the operational problems of the British and U. s. military also wanted to establish the close associations that OR/MS efforts in World War II.

Download or read book Manufacturing Facilities Design and Material Handling written by Fred E. Meyers and published by Pearson Educación. This book was released on 2005 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: This project-oriented facilities design and material handling reference explores the techniques and procedures for developing an efficient facility layout, and introduces some of the state-of-the-art tools involved, such as computer simulation. A "how-to," systematic, and methodical approach leads readers through the collection, analysis and development of information to produce a quality functional plant layout. Lean manufacturing; work cells and group technology; time standards; the concepts behind calculating machine and personnel requirements, balancing assembly lines, and leveling workloads in manufacturing cells; automatic identification and data collection; and ergonomics. For facilities planners, plant layout, and industrial engineer professionals who are involved in facilities planning and design.

Download or read book Introduction to Manufacturing Processes and Materials written by Robert Creese and published by CRC Press. This book was released on 2017-12-19 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first manufacturing book to examine time-based break-even analysis, this landmark reference/text applies cost analysis to a variety of industrial processes, employing a new, problem-based approach to manufacturing procedures, materials, and management. An Introduction to Manufacturing Processes and Materials integrates analysis of material costs and process costs, yielding a realistic, effective approach to planning and executing efficient manufacturing schemes. It discusses tool engineering, particularly in terms of cost for press work, forming dies, and casting patterns, process parameters such as gating and riser design for casting, feeds, and more.

Download or read book Material Handling Systems written by Charles Reese and published by CRC Press. This book was released on 2000-05-11 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book points out the safety and health concerns as well as the regulatory requirements for safe material handling. Many material handling venues are discussed from cranes to industrial robots. This diverse approach to material handling safety will be of interest to those who are responsible for safety or having material handling as a major component of their operation.

Download or read book Introduction to Mechanical System Simulation Using Adams written by James B. McConville and published by SDC Publications. This book was released on 2015 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to familiarize you with the basics of theory and practice in Adams Multibody Dynamics (MBD) modeling. The content has been developed to be beneficial to readers who are students or practicing engineers who are either completely new to MBD modeling or have some experience with MBD modeling. The author’s lengthy experience using the Adams software adds a practical and, occasionally, humorous complement to standard documentation and training materials, intended to benefit you while learning Adams. The book features relatively small examples which you can readily build and execute. This book contains an introduction to Adams theory which provides the basics on how Adams models are formulated and then numerically solved. Finally, this book concludes with some success stories taken from industry.

Download or read book Standard Handbook of Plant Engineering written by Robert C. Rosaler and published by McGraw Hill Professional. This book was released on 2002-01-25 with total page 1054 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the Standard Handbook of Plant Engineering, Second Edition, Robert C. Rosaler and 70 other industry experts take you on an exhaustive tour of the basic plant facility, plant operation equipment and the all-important maintenance function-giving you the hands-on skill and essential technical data you need to keep your plant running smoothly. You get complete, up-to-the-minute details on: In-plant prime power generation and cogeneration; Heating, ventilating and air conditioning; Water sources, use and disposition; Mechanical power transmission; Instrumentation and automatic control; Pollution control and waste disposal; Plant safety and sanitation; Energy conservation; Lubricants and lubrication systems.

Download or read book Materials Handling Handbook written by Raymond A. Kulweic and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 1482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sponsored jointly by the American Society of Mechanical Engineers and International Material Management Society, this single source reference is designed to meet today's need for updated technical information on planning, installing and operating materials handling systems. It not only classifies and describes the standard types of materials handling equipment, but also analyzes the engineering specifications and compares the operating capabilities of each type. Over one hundred professionals in various areas of materials handling present efficient methods, procedures and systems that have significantly reduced both manufacturing and distribution costs.

Download or read book 00109 15 Introduction to Materials Handling Instructor Guide written by NCCER and published by Prentice Hall. This book was released on 2015-06-12 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: (Module ID 00109-15) Describes the hazards associated with handling materials and provides techniques to avoid both injury and property damage. Common material-handling equipment is also introduced.

Download or read book Introduction to Particle Technology written by Martin J. Rhodes and published by John Wiley & Sons. This book was released on 2013-03-25 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle technology is a term used to refer to the science and technology related to the handling and processing of particles and powders. The production of particulate materials, with controlled properties tailored to subsequent processing and applications, is of major interest to a wide range of industries, including chemical and process, food, pharmaceuticals, minerals and metals companies and the handling of particles in gas and liquid solutions is a key technological step in chemical engineering. This textbook provides an excellent introduction to particle technology with worked examples and exercises. Based on feedback from students and practitioners worldwide, it has been newly edited and contains new chapters on slurry transport, colloids and fine particles, size enlargement and the health effects of fine powders. Topics covered include: Characterization (Size Analysis) Processing (Granulation, Fluidization) Particle Formation (Granulation, Size Reduction) Storage and Transport (Hopper Design, Pneumatic Conveying, Standpipes, Slurry Flow) Separation (Filtration, Settling, Cyclones) Safety (Fire and Explosion Hazards, Health Hazards) Engineering the Properties of Particulate Systems (Colloids, Respirable Drugs, Slurry Rheology) This book is essential reading for undergraduate students of chemical engineering on particle technology courses. It is also valuable supplementary reading for students in other branches of engineering, applied chemistry, physics, pharmaceutics, mineral processing and metallurgy. Practitioners in industries in which powders are handled and processed may find it a useful starting point for gaining an understanding of the behavior of particles and powders. Review of the First Edition taken from High Temperatures - High pressures 1999 31 243 – 251 "..This is a modern textbook that presents clear-cut knowledge. It can be successfully used both for teaching particle technology at universities and for individual study of engineering problems in powder processing."

Download or read book An Introduction to Manifolds written by Loring W. Tu and published by Springer Science & Business Media. This book was released on 2010-10-05 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manifolds, the higher-dimensional analogs of smooth curves and surfaces, are fundamental objects in modern mathematics. Combining aspects of algebra, topology, and analysis, manifolds have also been applied to classical mechanics, general relativity, and quantum field theory. In this streamlined introduction to the subject, the theory of manifolds is presented with the aim of helping the reader achieve a rapid mastery of the essential topics. By the end of the book the reader should be able to compute, at least for simple spaces, one of the most basic topological invariants of a manifold, its de Rham cohomology. Along the way, the reader acquires the knowledge and skills necessary for further study of geometry and topology. The requisite point-set topology is included in an appendix of twenty pages; other appendices review facts from real analysis and linear algebra. Hints and solutions are provided to many of the exercises and problems. This work may be used as the text for a one-semester graduate or advanced undergraduate course, as well as by students engaged in self-study. Requiring only minimal undergraduate prerequisites, 'Introduction to Manifolds' is also an excellent foundation for Springer's GTM 82, 'Differential Forms in Algebraic Topology'.

Download or read book Introduction to Applied Probability written by Paul E. Pfeiffer and published by Elsevier. This book was released on 2014-05-10 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Applied Probability provides a basis for an intelligent application of probability ideas to a wide variety of phenomena for which it is suitable. It is intended as a tool for learning and seeks to point out and emphasize significant facts and interpretations which are frequently overlooked or confused by the beginner. The book covers more than enough material for a one semester course, enhancing the value of the book as a reference for the student. Notable features of the book are: the systematic handling of combinations of events (Section 3-5); extensive use of the mass concept as an aid to visualization; an unusually careful treatment of conditional probability, independence, and conditional independence (Section 6-4); the resulting clarification facilitates the formulation of many applied problems; the emphasis on events determined by random variables, which gives unity and clarity to many topics important for interpretation; and the utilization of the indicator function, both as a tool for dealing with events and as a notational device in the handling of random variables. Students of mathematics, engineering, biological and physical sciences will find the text highly useful.

Download or read book Green Energetic Materials written by Tore Brinck and published by John Wiley & Sons. This book was released on 2014-01-15 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book presents a detailed account of research and recent developments in the field of green energetic materials, including pyrotechnics, explosives and propellants. This area is attracting increasing interest in the community as it undergoes a transition from using traditional processes, to more environmentally-friendly procedures. The book covers the entire line of research from the initial theoretical modelling and design of new materials, to the development of sustainable manufacturing processes. It also addresses materials that have already reached the production line, as well as considering future developments in this evolving field.

Download or read book Feedback Systems written by Karl Johan Åström and published by Princeton University Press. This book was released on 2021-02-02 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The essential introduction to the principles and applications of feedback systems—now fully revised and expanded This textbook covers the mathematics needed to model, analyze, and design feedback systems. Now more user-friendly than ever, this revised and expanded edition of Feedback Systems is a one-volume resource for students and researchers in mathematics and engineering. It has applications across a range of disciplines that utilize feedback in physical, biological, information, and economic systems. Karl Åström and Richard Murray use techniques from physics, computer science, and operations research to introduce control-oriented modeling. They begin with state space tools for analysis and design, including stability of solutions, Lyapunov functions, reachability, state feedback observability, and estimators. The matrix exponential plays a central role in the analysis of linear control systems, allowing a concise development of many of the key concepts for this class of models. Åström and Murray then develop and explain tools in the frequency domain, including transfer functions, Nyquist analysis, PID control, frequency domain design, and robustness. Features a new chapter on design principles and tools, illustrating the types of problems that can be solved using feedback Includes a new chapter on fundamental limits and new material on the Routh-Hurwitz criterion and root locus plots Provides exercises at the end of every chapter Comes with an electronic solutions manual An ideal textbook for undergraduate and graduate students Indispensable for researchers seeking a self-contained resource on control theory

Download or read book Ergonomic Guidelines for Manual Material Handling written by and published by . This book was released on 2007 with total page 67 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This booklet is written for managers and supervisors in industries that involve the manual handling of containers. It offers suggestions to improve the handling of rectangular, square, and cylindrical containers, sacks, and bags. "Improving Manual Material Handling in Your Workplace" lists the benefits of improving your work tasks. It also contains information on risk factors, types of ergonomic improvements, and effective training and sets out a four-step proactive action plan. The plan helps you identify problems, set priorities, make changes, and follow up. Sections 1 and 2 of "Improvement Options" provide ways to improve lifting, lowering, filling, emptying, or carrying tasks by changing work practices and/or the use of equipment. Guidelines for safer work practices are also included. Section 3 of "Improvement Options" provides ideas for using equipment instead of manually handling individual containers. Guidelines for safer equipment use are also included. For more help the "Resources" section contains additional information on administrative improvements, work assessment tools and comprehensive analysis methods. This section also includes an improvement evaluation tool and a list of professional and trade organizations related to material handling."--Page 6.

Download or read book Facilities Planning written by James A. Tompkins and published by . This book was released on 2003 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing various contemporary practices, this book shows how to approach facilities planning with precision. It guides the reader through each step in the planning process, from defining requirements to developing alternative material, handling techniques and manufacturing/waterhouse operations to selecting and evaluating facilities plans.