Download or read book An Introduction to Petroleum Fuel Facilities written by J. Paul Guyer and published by CreateSpace. This book was released on 2014-03-28 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides an introduction to petroleum fuel facilities for aircraft fueling.
Download or read book An Introduction to Aircraft Fueling Facilities written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2018-02-26 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for mechanical, civil and electrical engineers interested in aircraft fueling facilities. Here is what is discussed: 1. INTRODUCTION 2. GENERAL REQUIREMENTS 3. RECEIVING FACILITIES 4. DISPENSING FACILITIES 5. PIPING SYSTEMS 6. EQUIPMENT DESCRIPTIONS 7. CONTROLS 8. CANOPIES 9. FUEL ADDITIVES 10. DEFUELING AND RETURN-TO-BULK (RTB) SYSTEMS 11. PRODUCT RECOVERY SYSTEMS.
Download or read book An Introduction to Aircraft Fueling Facilities for Professional Engineers written by J Paul Guyer and published by Independently Published. This book was released on 2022-03-05 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for mechanical engineers, civil engineers and airport managers interested in aircraft fueling facilities. Here is what is discussed: 1. INTRODUCTION, 2. GENERAL REQUIREMENTS, 3. RECEIVING FACILITIES, 4. DISPENSING FACILITIES, 5. PIPING SYSTEMS, 6. EQUIPMENT DESCRIPTIONS, 7. CONTROLS, 8. CANOPIES, 9. FUEL ADDITIVES, 10. DEFUELING AND RETURN-TO-BULK (RTB) SYSTEMS, 11. PRODUCT RECOVERY SYSTEMS.
Download or read book An Introduction to Petroleum Fuel Facilities Aircraft Fueling Facilities written by J. Paul Guyer and published by Independently Published. This book was released on 2018-07-04 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides introductory technical guidance for mechanical engineers, electrical engineers, civil engineers and other professional engineers and construction managers interested in design and construction of bulk fuel delivery, storage and dispensing facilities at aircraft fueling facilities such as airports and airfields. Here is what is discussed: 1. INTRODUCTION, 2. GENERAL REQUIREMENTS, 3. RECEIVING FACILITIES, 4. DISPENSING FACILITIES, 5. PIPING SYSTEMS, 6. EQUIPMENT DESCRIPTIONS, 7. CONTROLS, 8. CANOPIES, 9. FUEL ADDITIVES, 10. DEFUELING AND RETURN-TO-BULK (RTB) SYSTEMS, 11. PRODUCT RECOVERY SYSTEMS
Download or read book An Introduction to Aircraft Fueling Facilities for Professional Engineers written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2022-03-05 with total page 67 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil engineers, mechanical engineers and other professional engineers and construction mangers interested in design of airports and air fields. Here is what is discussed: 1. INTRODUCTION, 2. GENERAL REQUIREMENTS, 3. RECEIVING FACILITIES, 4. DISPENSING FACILITIES, 5. PIPING SYSTEMS, 6. EQUIPMENT DESCRIPTIONS, 7. CONTROLS, 8. CANOPIES, 9. FUEL ADDITIVES, 10. DEFUELING AND RETURN-TO-BULK (RTB) SYSTEMS, 11. PRODUCT RECOVERY SYSTEMS.
Download or read book An Introduction to Petroleum Fuel Facilities written by J. Guyer and published by Independently Published. This book was released on 2018-04-22 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides professional engineers and construction managers with over 400 pages of technical guidance for the design and construction of petroleum fuel facilities. Here are the topics discussed: 1. AIRCRAFT FUELING FACILITIES, 2. ATMOSPHERE STORAGE TANKS, 3. BULK FUEL STORAGE, 4. GENERAL DESIGN INFORMATION, 5. MARINE FUELING FACILITIES, 6. PIPELINES AND GROUND FUELING FACILITIES, 7. PIPING SYSTEMS, 8. OPERATION AND MAINTENANCE, 9. OILY WASTEWATER COLLECTION AND TREATMENT
Download or read book An Introduction to Petroleum Fuel Facilities written by J. Paul Guyer and published by Createspace Independent Publishing Platform. This book was released on 2016-03-23 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides introductory technical guidance for mechanical engineers, electrical engineers, civil engineers and other professional engineers and construction managers interested in design and construction of petroleum fuel delivery, storage and dispensing facilities at aircraft fueling facilities at airports and airfields. Here is what is discussed: 1. INTRODUCTION, 2. GENERAL REQUIREMENTS, 3. RECEIVING FACILITIES, 4. DISPENSING FACILITIES, 5. PIPING SYSTEMS, 6. EQUIPMENT DESCRIPTIONS, 7. CONTROLS, 8. CANOPIES, 9. FUEL ADDITIVES, 10. DEFUELING AND RETURN-TO-BULK (RTB) SYSTEMS, 11. PRODUCT RECOVERY SYSTEMS
Download or read book An Introduction to Petroleum Fuel Facilities General Design Information written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2018-01-28 with total page 45 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil, mechanical and petroleum engineers interested in petroleum fuel storage and handling. Here is what is discussed: 1. OPERATIONAL CAPABILITIES 2. FUEL SPECIFICATIONS 3. FUEL PROPERTIES AND ADDITIVES 4. PRODUCT SEGREGATION 5. TRANSFER FLOW RATES 6. PHYSICAL SECURIT 7. MAINTAINABILITY CAPABILITIES 8. VOICE COMMUNICATIONS 9. OTHER COMMUNICATIONS 10. VAPOR RECOVERY 11. WORKER SAFETY 12. ELECTRICAL DESIGN 13. CATHODIC PROTECTION 14. ENVIRONMENTAL PROTECTION 15. FIRE PROTECTION 16. EMERGENCY SHUT-DOWN 17. ELECTROMAGNETIC RADIATION HAZARDS 18. IDENTIFICATION 19. ANTISTATIC DESIGN 20. OPERATION AND MAINTENANCE DOCUMENTATION 21. PROTECTION AGAINST SEISMIC ACTIVITY.
Download or read book Aviation Fuel Facilities written by AE-5C Aviation Ground Fueling Systems Committee and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document contains general criteria for the planning, design, and construction of military and commercial ground based aviation fueling facilities that receive, store, distribute, and dispense liquid aviation turbine fuels at airports to both fixed and rotary wing aircraft. This SAE Aerospace Recommended Practice contains general criteria for the planning, design, and construction of military and commercial ground based aviation fueling facilities that receive, store, distribute, and dispense liquid aviation turbine fuels at airports. Its purpose is to provide a description of practices that are commonly recognized throughout the industry as proving beneficial in the planning, design, and construction of aviation fuel systems at airports.
Download or read book Aviation Fuels with Improved Fire Safety written by National Research Council and published by National Academies Press. This book was released on 1997-09-18 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reduction of the fire hazard of fuel is critical to improving survivability in impact-survivable aircraft accidents. Despite current fire prevention and mitigation approaches, fuel flammability can overwhelm post-crash fire scenarios. The Workshop on Aviation Fuels with Improved Fire Safety was held November 19-20, 1996 to review the current state of development, technological needs, and promising technology for the future development of aviation fuels that are most resistant to ignition during a crash. This book contains a summary of workshop discussions and 11 presented papers in the areas of fuel and additive technologies, aircraft fuel system requirements, and the characterization of fuel fires.
Download or read book Manual on Civil Aviation Jet Fuel Supply written by International Civil Aviation Organization and published by . This book was released on 2012 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Petroleum Fuel Facilities Marine Fueling Facilities written by J. Paul Guyer and published by Independently Published. This book was released on 2018-03-11 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides introductory technical guidance for petroleum engineers and other professional engineers and construction managers interested in marine fueling facilities. Here is what is discussed: 1. FUNCTION, 2. FUEL PIERS AND WHARVES, 3. BERTHING PIERS, 4. OFFSHORE MOORINGS, 5. GENERAL REQUIREMENTS, 6. GENERAL LAYOUT, 7. PIPING SYSTEMS, 8. EQUIPMENT DESCRIPTIONS, 9. PRODUCT RECOVERY SYSTEMS, 10. WEATHER SHEDS, 11. CANOPIES, 12. SPECIAL CALCULATIONS, 13. SAFETY SHOWERS AND EYEWASH FOUNTAINS, 14 TRAFFIC BOLLARDS , 15. SPECIAL DRAINAGE FOR FUELING PIERS, 16. SPECIAL DRAINAGE FOR FUELING PIERS, 17. BALLAST TREATMENT AND SLUDGE REMOVAL, 18. SLUDGE REMOVAL SYSTEMS.
Download or read book An Introduction to Petroleum Fuel Facilities Pipelines and Ground Fueling Facilities written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2017-12-13 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for mechanical, petroleum and civil engineers, construction managers and facility managers interested in petroleum fuel pipelines and fueling facilities for ground vehicles such as cars and trucks. Here is what is discussed: 1. INTERTERMINAL AND INSTALLATION PIPELINES 2. GROUND PRODUCTS FUELING FACILITIES.
Download or read book Commercial Aircraft Propulsion and Energy Systems Research written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-08-09 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary human activities that release carbon dioxide (CO2) into the atmosphere are the combustion of fossil fuels (coal, natural gas, and oil) to generate electricity, the provision of energy for transportation, and as a consequence of some industrial processes. Although aviation CO2 emissions only make up approximately 2.0 to 2.5 percent of total global annual CO2 emissions, research to reduce CO2 emissions is urgent because (1) such reductions may be legislated even as commercial air travel grows, (2) because it takes new technology a long time to propagate into and through the aviation fleet, and (3) because of the ongoing impact of global CO2 emissions. Commercial Aircraft Propulsion and Energy Systems Research develops a national research agenda for reducing CO2 emissions from commercial aviation. This report focuses on propulsion and energy technologies for reducing carbon emissions from large, commercial aircraftâ€" single-aisle and twin-aisle aircraft that carry 100 or more passengersâ€"because such aircraft account for more than 90 percent of global emissions from commercial aircraft. Moreover, while smaller aircraft also emit CO2, they make only a minor contribution to global emissions, and many technologies that reduce CO2 emissions for large aircraft also apply to smaller aircraft. As commercial aviation continues to grow in terms of revenue-passenger miles and cargo ton miles, CO2 emissions are expected to increase. To reduce the contribution of aviation to climate change, it is essential to improve the effectiveness of ongoing efforts to reduce emissions and initiate research into new approaches.
Download or read book An Introduction to Petroleum Fuel Facilities written by J. Paul Guyer and published by Createspace Independent Publishing Platform. This book was released on 2017-07-10 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides introductory technical guidance for civil engineers, mechanical engineers and other professional engineers, construction managers and plant operators interested in petroleum fuel handling facilities. Here is what is discussed: 1. AIRCRAFT FUELING FACILITIES 2. ATMOSPHERIC STORAGE TANKS 3. BULK FUEL STORAGE 4. GENERAL DESIGN INFORMATION 5. MARINE FUELING FACILITIES 6. PIPELINES AND GROUND FUELING FACILITIES 7. PIPING SYSTEMS 8. OPERATION AND MAINTENANCE 9. OILY WASTEWATER COLLECTION AND TREATMENT.
Download or read book An Introduction to Petroleum Fuel Facilities written by J. Paul Guyer and published by CreateSpace. This book was released on 2014-03-29 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides an introduction to pipelines and ground fueling facilities for petroleum fuel products.
Download or read book An Introduction to Bulk Fuel Storage Facilities written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2021-06-20 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil engineers, mechanical engineers and construction managers interested in bulk fuel storage facilities. Here is what is discussed: 1. INTRODUCTION 2. GENERAL REQUIREMENTS 3. RECEIVING FACILITIES 4. DISPENSING FACILITIES 5. PIPING SYSTEMS 6. EQUIPMENT DESCRIPTIONS 7. CONTROLS 8. CANOPIES 9. PRODUCT RECOVERY SYSTEMS 10. FUEL ADDITIVES
