Download or read book An Integrated Production and Preventive Maintenance Planning Model for an Ageing and Deteriorating Production Systems with Limited Historical Data written by Richa Chouhan and published by HCTL Open. This book was released on with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: HCTL Open Thesis and Dissertation Repository (HCTL Open TDR) is an International, Open-Access, Multi-disciplinary, Online Repository of Thesis, Dissertations, Students and Organizational Reports. HCTL Open TDR is published by HCTL Open Publications Solutions, India. - Get more at: http://tdr.hctl.org/

Download or read book Integrated Models in Production Planning Inventory Quality and Maintenance written by M.A. Rahim and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production planning, inventory management, quality control, and maintenance policy are critical components of the manufacturing system. The effective integration of these four components gives a manufacturing operation the competitive edge in today's global market place. Integrated Models in Production Planning, Inventory, Quality, and Maintenance provides, in one volume, the latest developments in the integration of production, quality, and maintenance models. Prominent researchers, who are actively engaged in these areas, have contributed the topical chapters focused on the most recent issues in the area. In Part I, Ben-Daya and Rahim provide an overview of the literature dealing with integrated models for production, quality, and maintenance. Directions for future research are outlined. Part II contains six chapters (chapters 2 to 6) dealing with integrated models for production and maintenance. Part III deals with integrated production/inventory and quality models in chapters 7-11. Part IV focuses on quality and maintenance integrated models and contains two chapters. Part V deals with warranty, manufacturing, and quality and contains two chapters. Part VI addresses issues related to quality and contains three chapters (chapters 16-18).

Download or read book HCTL Open International Journal of Technology Innovations and Research IJTIR written by Raj Gaurav Mishra and published by HCTL Open Publications Solutions, India. This book was released on 2013-07-31 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: HCTL Open International Journal of Technology Innovations and Research (IJTIR) [ISSN (Online): 2321-1814] is an International, Open-Access, Peer-Reviewed, Online journal devoted to various disciplines of Science and Technology. HCTL Open IJTIR is a bi-monthly journal published by HCTL Open Publications Solutions, India and Hybrid Computing Technology Labs, India. - Get more information at: http://ijtir.hctl.org/

Download or read book Integrated Maintenance Planning in Manufacturing Systems written by Umar M. Al-Turki and published by Springer Science & Business. This book was released on 2014-04-25 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the concept of integrated planning for maintenance and production taken into account quality and safety for high global socio-economic impact. It provides insight into the planning process at a global level starting from the business level and ending with the operational level where the plan is implemented and controlled.

Download or read book An Integrated Multi state Multi level Preventive Maintenance Policy for a Stochastically Deteriorating Production System written by Ranomal Sanbhuji Hirani and published by . This book was released on 1997 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Maintenance for Industrial Systems written by Riccardo Manzini and published by Springer Science & Business Media. This book was released on 2009-11-09 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: New, global and extended markets are forcing companies to process and manage increasingly differentiated products with shorter life cycles, low volumes and reduced customer delivery times. In today’s global marketplace production systems need to be able to deliver products on time, maintain market credibility and introduce new products and services faster than competitors. As a result, a new production paradigm of a production system has been developed and a supporting management decision-making approach simultaneously incorporating design, management, and control of the production system is necessary so that this challenge can be effectively and efficiency met. "Maintenance Engineering and its Applications in Production Systems" meets this need by introducing an original and integrated idea of maintenance: maintenance for productivity. The volume starts with the introduction and discussion of a new conceptual framework based on productivity, quality, and safety supported by maintenance. Subsequent chapters illustrate the most relevant models and methods to plan, organise, implement and control the whole maintenance process (reliability evaluation models and prediction, maintenance strategies and policies, spare parts management, computer maintenance management software – CMMS, and total productive maintenance – TPM, etc.). Several examples of problems supported by solutions, and real applications to help and test the reader’s comprehension are included. "Maintenance Engineering and its Applications in Production Systems" will certainly be valuable to engineering students, doctoral and post-doctoral students and also to maintenance practitioners, as well as managers of industrial and service companies.

Download or read book Joint Optimization of Manufacturing Quantities and Maintenance for a Deteriorating Production System written by Shuaizi Li and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Integrating Preventive Maintenance Planning and Production Scheduling for Manufacturing Systems written by Navadon Sortrakul and published by . This book was released on 2003 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Planning and Control of Maintenance Systems written by Salih O. Duffuaa and published by Springer. This book was released on 2016-10-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analyzing maintenance as an integrated system with objectives, strategies and processes that need to be planned, designed, engineered, and controlled using statistical and optimization techniques, the theme of this book is the strategic holistic system approach for maintenance. This approach enables maintenance decision makers to view maintenance as a provider of a competitive edge not a necessary evil. Encompassing maintenance systems; maintenance strategic and capacity planning, planned and preventive maintenance, work measurements and standards, material (spares) control, maintenance operations and control, planning and scheduling, maintenance quality, training, and others, this book gives readers an understanding of the relevant methodology and how to apply it to real-world problems in industry. Each chapter includes a number exercises and is suitable as a textbook or a reference for a professionals and practitioners whilst being of interest to industrial engineering, mechanical engineering, electrical engineering, and industrial management students. It can also be used as a textbook for short courses on maintenance in industry. This text is the second edition of the book, which has four new chapters added and three chapters are revised substantially to reflect development in maintenance since the publication of the first edition. The new chapters cover reliability centered maintenance, total productive maintenance, e-maintenance and maintenance performance, productivity and continuous improvement.

Download or read book The Planning and Scheduling of Production Systems written by Abdelhakim Artiba and published by Springer Science & Business Media. This book was released on 1996-12-31 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: If one accepts the premise that there is no wealth without production, whether at the individual or national level, one is immediately led to the conclusion that the study of productive systems lies at the forefront of subjects that should be intensively, as well as rationally and extensively, studied to achieve the desired 'sustainable growth' of society, where the latter is defined as growth in the quality of life that does not waste the available resources in the long run. Since the end of World War II there has been a remarkable evolution in thinking about production, abetted to a large measure by the nascent field of informatics: the computer technology and the edifices that have been built around it, such as information gathering and dissemination worldwide through communication networks, software products, peripheral interfaces, etc. Additionally, the very thought processes that guide and motivate studies in production have undergone fundamental changes which verge on being revolutionary, thanks to developments in operations research and cybernetics.

Download or read book Joint Optimization of Maintenance and Production Policies written by Nidhal Rezg and published by John Wiley & Sons. This book was released on 2014-05-09 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the recent work regarding the different approaches developed in the framework of the joint optimization of intelligent maintenance and production strategies. The originality of these strategies is that they take various constraints into account, including production management, subcontracting environmental degradation, inspection and product quality.

Download or read book Handbook of Research on Modern Optimization Algorithms and Applications in Engineering and Economics written by Vasant, Pandian and published by IGI Global. This book was released on 2016-03-08 with total page 999 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern optimization approaches have attracted many research scientists, decision makers and practicing researchers in recent years as powerful intelligent computational techniques for solving several complex real-world problems. The Handbook of Research on Modern Optimization Algorithms and Applications in Engineering and Economics highlights the latest research innovations and applications of algorithms designed for optimization applications within the fields of engineering, IT, and economics. Focusing on a variety of methods and systems as well as practical examples, this book is a significant resource for graduate-level students, decision makers, and researchers in both public and private sectors who are seeking research-based methods for modeling uncertain real-world problems. .

Download or read book Integrating Maintenance Planning and Production Scheduling written by Maliheh Aramon Bajestani and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Complex System Maintenance Handbook written by Khairy Ahmed Helmy Kobbacy and published by Springer Science & Business Media. This book was released on 2008-04-15 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: This utterly comprehensive work is thought to be the first to integrate the literature on the physics of the failure of complex systems such as hospitals, banks and transport networks. It has chapters on particular aspects of maintenance written by internationally-renowned researchers and practitioners. This book will interest maintenance engineers and managers in industry as well as researchers and graduate students in maintenance, industrial engineering and applied mathematics.

Download or read book Condition based Maintenance Optimization of Degrading Systems written by Shuaichong Wei and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of this thesis is to analyze and optimize the condition-based maintenance strategies to be adopted for production systems that can operate in degradation mode. First, we consider a production system composed of one machine/component and then extend it to more complex production systems. The machine is modeled as a multi-state system ranging from perfect functioning to total failure and each degraded operating state is characterized by its own production rate, fraction of nonconforming items produced and level of side effects such as the amount of carbon dioxide emitted and the level of energy consumption. When the last acceptable state of the component/machine is reached, preventive maintenance actions are deployed to bring the machine back to one of the previous higher levels of performance. In this context, three various types of common manufacturing systems are considered in this thesis: a serial system without intermediate buffers, two-machine/component manufacturing system with an intermediate buffer and a serial-parallel system without intermediate buffers. In the first type of configuration (i.e., a serial system), the objective of the optimization is to maximize the production rate of the system. The numerical results showed that the optimal preventive maintenance policies should be selected from the perspective of the whole system and major maintenance actions should be applied to the bottleneck machine of the system. In the second type of configuration (i.e., a system with two machines and an intermediate buffer), the objective of the optimization is to minimize the sum of the costs associated with maintenance, inventory level, nonconforming items and side effects caused by the degradation of machine's performance, while keeping the production rate at a high level. An analytical evaluation method is thus developed to evaluate the production rate. The effect of preventive maintenance and buffer level is analyzed, and the obtained results clearly show that a minimum cost can be reached when preventive maintenance is optimized for the whole system. In the case of the third type of configuration (i.e., a multi-state series-parallel system), a new model integrating condition-based maintenance and redundancy optimization is proposed. The objective is to jointly optimize, under availability constraints, the structure of the system and the conditional maintenance actions at a minimum cost. To estimate the availability of the system, a new model combining Markov chains and the universal moment generating function technique is developed. Moreover, a genetic algorithm is proposed to solve the formulated combinatorial optimization problem. The results obtained showed that the integration of operating costs in the optimization model gives better results, compared to the model considering only design and maintenance costs.

Download or read book Machinery Prognostics and Prognosis Oriented Maintenance Management written by Jihong Yan and published by John Wiley & Sons. This book was released on 2014-11-12 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a complete presentatin of the basic essentials of machinery prognostics and prognosis oriented maintenance management, and takes a look at the cutting-edge discipline of intelligent failure prognosis technologies for condition-based maintenance. Presents an introduction to advanced maintenance systems, and discusses the key technologies for advanced maintenance by providing readers with up-to-date technologies Offers practical case studies on performance evaluation and fault diagnosis technology, fault prognosis and remaining useful life prediction and maintenance scheduling, enhancing the understanding of these technologies Pulls togeter recent developments and varying methods into one volume, complemented by practical examples to provide a complete reference

Download or read book Production and Maintenance Optimization Problems written by Nidhal Rezg and published by John Wiley & Sons. This book was released on 2016-10-14 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on industrial constraints such as subcontracting, warranty, and quality in manufacturing and logistic fields and gives new integrated maintenance strategies. It presents new production and maintenance Control Policies compared to the Hedging Point theory Strategy and different integrated strategies of maintenance are developed under industrial constraints in order to propose a robustness production and maintenance plan.