Download or read book An Infrared and Kinetic Study of NO Reduction by CO Over a Pt Catalyst written by Charles Nicholas Ludvik and published by . This book was released on 1975 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Selective Catalytic Reduction of NOx written by Oliver Kröcher and published by MDPI. This book was released on 2018-12-14 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Selective Catalytic Reduction of NOx" that was published in Catalysts
Download or read book Catalysis and Automotive Pollution Control written by A. Crucq and published by Elsevier. This book was released on 1987-04-01 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: In June 1984 the EEC Commission proposed new standards of permissible exhaust gas from motor vehicles to be introduced in Europe; these standards were approved by the Ministers of the Environment one year later. As the control of automotive pollution is at present mainly a catalytic problem, it was decided to hold an International Symposium on the subject, and an organizing committee composed of people engaged in catalytic research in the different Belgian Universities was constituted. This was the first Symposium of its kind to be held on an international level, and the quality and scientific interest of the papers presented was exceptional. It is planned to hold a follow-up Symposium in 2 to 3 years' time.The first part of the book is a general introduction to the problem of automotive pollution. The second, properly catalytic, part is devoted to fundamental and applied studies on pollution control, with emphasis on exhaust catalytic converters.
Download or read book Past and Present in DeNOx Catalysis From Molecular Modelling to Chemical Engineering written by Pascal Granger and published by Elsevier. This book was released on 2007-12-15 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers an overview of the state of the art in the field of DeNOx catalysis in order to focus novel orientations, new technological developments, from laboratory to industrial scale. A particular attention has been paid towards the implementation of catalytic processes for minimising NOx emissions either from stationary or mobile sources under lean condition to meet future standard regulations of NOx emissions. In the first part of this book, critical aspects reported in the literature which usually make difficult the achievement of efficient catalytic technologies in those conditions are summarised and analysed in order two separate new perspectives. The second part deals with fundamental aspects at molecular level. A better understanding of the reactions involved under unsteady-state conditions is probably a pre-requisite step for improving the performances of the actual processes or developing original ones. The development of powerful in situ spectroscopic techniques is of fundamental interest for kinetic modelling. Correlations between spectroscopic and kinetic data with those obtained from theoretical calculations are reported. Some illustrations emphasise the fact that these comparisons may help in determining the nature of the catalytic active sites and building predictive tools for simulations under running conditions. The latter part of this book will be illustrated by different practical approaches covering various aspects related to the catalysts preparation and the development of alternative technologies which include industrial considerations.- New technological developments for investigating catalytic reactions in transient conditions (in situ and operando spectroscopic techniques)- Concerted approaches in DeNOx catalysis - How academic aspects (kinetic, in situ spectroscopic measurements) can provide useful information for practical applications- Comparison of different approaches provided by academic and industrial partners
Download or read book Energy Research Abstracts written by and published by . This book was released on 1978 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pillared Clays and Related Catalysts written by Antonio Gil and published by Springer Science & Business Media. This book was released on 2010-08-28 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first works introducing the aluminum intercalated clay family in the early 1970s, interest in the synthesis of pillared interlayered clays has increased tremendously, especially research into the properties and applications of new synthesis methods. The need for solids that could be used as cracking catalysts with larger pores than zeolitic materials has spurred the synthesis of new porous materials from clays. Pillared Clays and Related Catalysts reviews the properties and applications of pillared clays and other layered materials used as catalysts, focusing on: the acidity of pillared clays and the effect it has on catalytic performance the use of pillared clays as supports for catalytically active phases, and the use of the resulting solids in environmentally friendly reactions the applications of the selective reduction of NOx the comparison between the reactions of pillared clays and anionic clays.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Environmental Catalysis written by John N. Armor and published by American Chemical Society. This book was released on 1994 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive volume on the major aspects of environmental catalysis. Focuses on NO x removal, mobile engine emission controls, power plant emissions, control of volatile organic compounds, SO x emissions, and waste minimization. Overview chapters introduce each section and provide added perspective and coverage. Includes comprehensive technical reports on automotive and diesel emission control catalysis, NO x removal, and removal of chlorinated hydrocarbons from various process streams.
Download or read book Molecular Spectroscopy of Oxide Catalyst Surfaces written by Anatoli Davydov and published by John Wiley & Sons. This book was released on 2003-06-27 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: As in the study of transition metal complexes in solution, molecular spectroscopic methods - principally the infrared, ultraviolet/visible and electron spin resonance spectroscopies - have played key roles in establishing the concepts of coordination chemistry occurring at the surfaces of solids. This book describes the development of the principals of coordination chemistry of oxide surfaces using analyses of data obtained by these methods. The nature, properties, concentration of the surface adsorption centers and their influence on the character of interaction with different molecules are investigated. The book commences with an account of the basic theoretical principles and experimental techniques of the various spectroscopy methods, with special attention devoted to in situ measurements where the oxide or catalyst sample is in contact with the adsorbate or the reactant. A detailed account is presented of the methods for characterizing the oxidation state and degree of coordination of surface cations and oxygen anions by the adsorption of probe molecules. The complexation of many inorganic, organometallic and organic molecules with different oxide systems is critically examined, and a classification of formed surface compounds, based on the interaction with definite type of adsorption centers, is given. Possible mechanisms of numerous catalytic reactions, including the transformation of organic molecules over acidic catalysts via the carboionic mechanism, are discussed using the spectroscopic identifications of reaction intermediates. A comprehensive analysis of the literature on the interpretation of the spectra of surface compounds on oxides is presented. This highly illustrated and extensively referenced volume is intended for specialists working in the fields of surface physical chemistry, surface and materials sciences, and adsorption phenomena and is essential reading for those involved in the heterogeneous catalysis by transition metal-oxides.
Download or read book Catalyst Characterization written by Boris Imelik and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: to the Fundamental and Applied Catalysis Series Catalysis is important academically and industrially. It plays an essential role in the manufacture of a wide range of products, from gasoline and plastics to fertilizers and herbicides, which would otherwise be unobtainable or prohibitive ly expensive. There are few chemical-or oil-based material items in modern society that do not depend in some way on a catalytic stage in their manufacture. Apart from manufacturing processes, catalysis is finding other important and over-increasing uses; for example, successful applications of catalysis in the control ofpollution and its use in environmental control are certain to in crease in the future. The commercial import an ce of catalysis and the diverse intellectual challenges of catalytic phenomena have stimulated study by a broad spectrum of scientists including chemists, physicists, chemical engineers, and material scientists. Increasing research activity over the years has brought deeper levels of understanding, and these have been associated with a continually growing amount of published material. As recentlyas sixty years ago, Rideal and Taylor could still treat the subject comprehensively in a single volume, but by the 19 50s Emmett required six volumes, and no conventional multivolume text could now cover the whole of catalysis in any depth.
Download or read book Air Pollution Abstracts written by and published by . This book was released on 1971 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Nanomaterials for Catalysis and Energy written by Vladislav A. Sadykov and published by Elsevier. This book was released on 2018-08-27 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Nanomaterials for Catalysis and Energy: Synthesis, Characterization and Applications outlines new approaches to the synthesis of nanomaterials (synthesis in flow conditions, laser electrodispersion of single metals or alloys on carbon or oxide supports, mechanochemistry, sol-gel routes, etc.) to provide systems with a narrow particle size distribution, controlled metal-support interaction and nanocomposites with uniform spatial distribution of domains of different phases, even in dense sintered materials. Methods for characterization of real structure and surface properties of nanomaterials are discussed, including synchrotron radiation diffraction and X-ray photoelectron spectroscopy studies, neutronography, transmission/scanning electron microscopy with elemental analysis, and more. The book covers the effect of nanosystems' composition, bulk and surface properties, metal-support interaction, particle size and morphology, deposition density, etc. on their functional properties (transport features, catalytic activity and reaction mechanism). Finally, it includes examples of various developed nanostructured solid electrolytes and mixed ionic-electronic conductors as materials in solid oxide fuel cells and asymmetric supported membranes for oxygen and hydrogen separation. - Outlines synthetic and characterization methods for nanocatalysts - Relates nanocatalysts' properties to their specific applications - Proposes optimization methods aiming at specific applications
Download or read book The Catalytic Chemistry of Nitrogen Oxides written by Richard Klimisch and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers and discussions from the sympo!,ium on "The Catalytic Chemistry of Nitrogen Oxides" held at the General Motors Research Laboratories on October 7-8, 1974. This symposium is the eighteenth in the annual series presented by the Research Laboratories. The topics for these symposiums have covered a broad range. Each topic was selected to be of intense current interest and of significant technical importance. There is no question that the subject of the 1974 Symposium satisfies these two criteria. The control of automotive nitrogen oxides has been perhaps the most difficult and controversial area of automotive emissions both in terms of what is necessary and in terms of what is technically feasible. This area has been a source of considerable discussion not only in the technical community but also in governments both in the U. S. and abroad. This meeting brought together scientists working in surface chemistry with engineers working on system design. It also brought together representatives of government, academia and industry. We feel that an important side benefit of the meeting was the improved understanding that was developed between these groups. Participants came from Europe and Japan as well as Canada and the United States. The technical papers spanned the range from fundamental interactions of NO on surfaces through bench scale kinetic and mechanistic studies and ended with catalytic applications. Although the emphasis was on automotive NO removal, stack gas NO x x control was also covered.
Download or read book Catalyst Preparation written by John Regalbuto and published by CRC Press. This book was released on 2016-04-19 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text explores the optimization of catalytic materials through traditional and novel methods of catalyst preparation, characterization, and monitoring for oxides, supported metals, zeolites, and heteropolyacids. It focuses on the synthesis of bulk materials and of heterogeneous materials, particularly at the nanoscale. The final chapters examine pretreatment, drying, finishing effects, and future applications involving catalyst preparation and the technological advances necessary for continued progress. Topics also include heat and mass transfer limitations, computation methods for predicting properties, and catalyst monitoring on laboratory and industrial scales.
Download or read book Methanol Synthesis written by Jerzy Skrzypek and published by . This book was released on 1994 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Emissions Control Catalysis written by Ioannis V. Yentekakis and published by MDPI. This book was released on 2020-06-18 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: The important advances achieved over the past years in all technological directions (industry, energy, and health) contributing to human well-being are unfortunately, in many cases, accompanied by a threat to the environment, with photochemical smog, stratospheric ozone depletion, acid rain, global warming, and finally climate change being the most well-known major issues. These are the results of a variety of pollutants emitted through these human activities. The indications show that we are already at a tipping point that might lead to non-linear and sudden environmental change on a global scale. Aiming to tackle these adverse effects in an attempt to mitigate any damage that has already occurred and to ensure that we are heading toward a cleaner (green) and sustainable future, scientists around the world are developing tools and techniques to understand, monitor, protect, and improve the environment. Emissions control catalysis is continuously advancing, providing novel, multifunctional, and optimally promoted using a variety of methods, nano-structured catalytic materials, and strategies (e.g., energy chemicals recycling, cyclic economy) that enable us to effectively control emissions, either of mobile or stationary sources, improving the quality of air (outdoor and indoor) and water and the energy economy. Representative cases include the abatement and/or recycling of CO2, CO, NOx, N2O, NH3, CH4, higher hydrocarbons, volatile organic compounds (VOCs), particulate matter, and specific industrial emissions (e.g., SOx, H2S, dioxins aromatics, and biogas). The “Emissions Control Catalysis” Special Issue has succeeded in collecting 22 high-quality contributions, included in this MDPI open access book, covering recent research progress in a variety of fields relevant to the above topics and/or applications, mainly on: (i) NOx catalytic reduction from cars (i.e., TWC) and industry (SCR) emissions; (ii) CO, CH4, and other hydrocarbons removal, and (iii) CO2 capture/recirculation combining emissions control with added-value chemicals production.
Download or read book Platinum Metals Review written by and published by . This book was released on 1978 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt:
