Download or read book Design of Linear RF Outphasing Power Amplifiers written by Xuejun Zhang and published by Artech House. This book was released on 2003 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book devoted exclusively to the outphasing power amplifier, covering the most recent research results on important aspects in practical design and applications. A compilation of all the proposed outphasing approaches, this is an important resource for engineers designing base station and mobile handset amplifiers, engineering managers and program managers supervising power amplifier designs, and R&D personnel in industry. The work enables you to: design microwave power amplifiers with higher efficiency and improved linearity at a lower cost; understand linearity and performance tradeoffs in microwave power amplifiers; and understand the effect of new modulation techniques on microwave power amplifiers.

Download or read book RF Power Amplifiers for Wireless Communications written by Steve C. Cripps and published by Artech House Publishers. This book was released on 2006-01-01 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extensively revised edition offers a comprehensive, practical, up-to-date understanding of how to tackle a power amplifier design with confidence and quickly determine the cause of malfunctioning hardware.

Download or read book High Efficiency Load Modulation Power Amplifiers for Wireless Communications written by Zhancang Wang and published by Artech House. This book was released on 2017-06-30 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This cutting-edge resource presents a complete and systematic overview of the practical design considerations of radio frequency (RF) high efficiency load modulation power amplifiers (PA) for modern wireless communications for 4G and beyond. It provides comprehensive insight into all aspects of load modulation PA design and optimization not only covering design approaches specifically for passive and active load modulation operation but also hybrid with dynamic supply modulation and digital signal processing algorithms required for performance enhancement. Passive load impedance tuner design, dynamic load modulation PA, active load modulation PA and Doherty PA design for efficiently enhancement are explained. Readers find practical guidance into load modulation PA design for bandwidth extension, including video bandwidth enhancement techniques, broadband dynamic load amplifiers, topology selection, design procedures, and network output. This book presents the evolution and integration of classical load modulation PA topologies in order to meet new challenges in the field.

Download or read book Articles in ITJEMAST V13 12 2022 written by and published by International Transaction Journal of Engineering, Management, & Applied Sciences & Technologies. This book was released on with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Published articles in ITJEMAST V13(12) 2022

Download or read book RF Technologies for Low Power Wireless Communications written by Tatsuo Itoh and published by John Wiley & Sons. This book was released on 2004-04-07 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: A survey of microwave technology tailored for professionals in wireless communications RF Technologies for Low Power Wireless Communications updates recent developments in wireless communications from a hardware design standpoint and offers specialized coverage of microwave technology with a focus on the low power wireless units required in modern wireless systems. It explores results of recent research that focused on a holistic, integrated approach to the topics of materials, devices, circuits, modulation, and architectures rather than the more traditional approach of research into isolated topical areas. Twelve chapters deal with various fundamental research aspects of low power wireless electronics written by world-class experts in each field. The first chapter offers an overview of wireless architecture and performance, followed by detailed coverage of: Advanced GaAs-based HBT designs InP-based devices and circuits Si/SiGe HBT technology Noise in GaN devices Power amplifier architectures and nonlinearities Planar-oriented components MEMS and micromachined components Resonators, filters, and low-noise oscillators Antennas Transceiver front-end architectures With a clear focus and expert contributors, RF Technologies for Low Power Wireless Communications will be of interest to a wide range of electrical engineering disciplines working in wireless technologies.

Download or read book CMOS Power Amplifiers for Wireless Communications written by Chengzhou Wang and published by . This book was released on 2003 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book RF Power Amplifiers written by Marian K. Kazimierczuk and published by John Wiley & Sons. This book was released on 2008-11-20 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: An advanced textbook covering the fundamental theory of RF power amplifiers and their uses, this book provides essential guidance for design procedures. The introduction explains the basic theory of RF power amplifiers besides providing the basic classification of the different types of RF power amplifier. It then systematically dedicates a chapter to each different of RF power amplifier covering A, B and C, D (full-bridge and half-bridge types), E (zero-voltage-switching and zero-current-switching), F and DE amplifiers. Throughout this comprehensive guide, the optimal operating conditions are explored and the possible causes for suboptimum operation explained. The book then considers integrated inductors and linearization techniques and LC Oscillators in the concluding chapters. A comprehensive text covering the fundamentals of RF power amplifiers and their range of applications in radio and TV broadcasting, wireless communications and radars. Presents accessible coverage of the complex principles of operation of RF power amplifiers and radio power systems. Introduces the fundamental design techniques and procedures for practitioners for RF power amplifiers. All chapters contain examples and design procedures throughout, with review questions and problems at the end of each chapter. A solutions manual is available for instructors upon enquiry

Download or read book Advances in Analog and RF IC Design for Wireless Communication Systems written by Gabriele Manganaro and published by Academic Press. This book was released on 2013-05-13 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Analog and RF IC Design for Wireless Communication Systems gives technical introductions to the latest and most significant topics in the area of circuit design of analog/RF ICs for wireless communication systems, emphasizing wireless infrastructure rather than handsets. The book ranges from very high performance circuits for complex wireless infrastructure systems to selected highly integrated systems for handsets and mobile devices. Coverage includes power amplifiers, low-noise amplifiers, modulators, analog-to-digital converters (ADCs) and digital-to-analog converters (DACs), and even single-chip radios. This book offers a quick grasp of emerging research topics in RF integrated circuit design and their potential applications, with brief introductions to key topics followed by references to specialist papers for further reading. All of the chapters, compiled by editors well known in their field, have been authored by renowned experts in the subject. Each includes a complete introduction, followed by the relevant most significant and recent results on the topic at hand. This book gives researchers in industry and universities a quick grasp of the most important developments in analog and RF integrated circuit design. - Emerging research topics in RF IC design and its potential application - Case studies and practical implementation examples - Covers fundamental building blocks of a cellular base station system and satellite infrastructure - Insights from the experts on the design and the technology trade-offs, the challenges and open questions they often face - References to specialist papers for further reading

Download or read book Microwave Circuit Design Using Linear and Nonlinear Techniques written by George D. Vendelin and published by John Wiley & Sons. This book was released on 2021-04-08 with total page 1200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Four leaders in the field of microwave circuit design share their newest insights into the latest aspects of the technology The third edition of Microwave Circuit Design Using Linear and Nonlinear Techniques delivers an insightful and complete analysis of microwave circuit design, from their intrinsic and circuit properties to circuit design techniques for maximizing performance in communication and radar systems. This new edition retains what remains relevant from previous editions of this celebrated book and adds brand-new content on CMOS technology, GaN, SiC, frequency range, and feedback power amplifiers in the millimeter range region. The third edition contains over 200 pages of new material. The distinguished engineers, academics, and authors emphasize the commercial applications in telecommunications and cover all aspects of transistor technology. Software tools for design and microwave circuits are included as an accompaniment to the book. In addition to information about small and large-signal amplifier design and power amplifier design, readers will benefit from the book’s treatment of a wide variety of topics, like: An in-depth discussion of the foundations of RF and microwave systems, including Maxwell’s equations, applications of the technology, analog and digital requirements, and elementary definitions A treatment of lumped and distributed elements, including a discussion of the parasitic effects on lumped elements Descriptions of active devices, including diodes, microwave transistors, heterojunction bipolar transistors, and microwave FET Two-port networks, including S-Parameters from SPICE analysis and the derivation of transducer power gain Perfect for microwave integrated circuit designers, the third edition of Microwave Circuit Design Using Linear and Nonlinear Techniques also has a place on the bookshelves of electrical engineering researchers and graduate students. It’s comprehensive take on all aspects of transistors by world-renowned experts in the field places this book at the vanguard of microwave circuit design research.

Download or read book Wireless Technologies written by Krzysztof Iniewski and published by CRC Press. This book was released on 2017-12-19 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced concepts for wireless technologies present a vision of technology that is embedded in our surroundings and practically invisible. From established radio techniques like GSM, 802.11 or Bluetooth to more emerging technologies, such as Ultra Wide Band and smart dust motes, a common denominator for future progress is the underlying integrated circuit technology. Wireless Technologies responds to the explosive growth of standard cellular radios and radically different wireless applications by presenting new architectural and circuit solutions engineers can use to solve modern design problems. This reference addresses state-of-the art CMOS design in the context of emerging wireless applications, including 3G/4G cellular telephony, wireless sensor networks, and wireless medical application. Written by top international experts specializing in both the IC industry and academia, this carefully edited work uncovers new design opportunities in body area networks, medical implants, satellite communications, automobile radar detection, and wearable electronics. The book is divided into three sections: wireless system perspectives, chip architecture and implementation issues, and devices and technologies used to fabricate wireless integrated circuits. Contributors address key issues in the development of future silicon-based systems, such as scale of integration, ultra-low power dissipation, and the integration of heterogeneous circuit design style and processes onto one substrate. Wireless sensor network systems are now being applied in critical applications in commerce, healthcare, and security. This reference, which contains 25 practical and scientifically rigorous articles, provides the knowledge communications engineers need to design innovative methodologies at the circuit and system level.

Download or read book Microwave Wireless Communications written by Antonio Raffo and published by Academic Press. This book was released on 2016-03-01 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: To design and develop fast and effective microwave wireless systems today involves addressing the three different 'levels': Device, circuit, and system. This book presents the links and interactions between the three different levels rather than providing just a comprehensive coverage of one specific level. With the aim of overcoming the sectional knowledge of microwave engineers, this will be the first book focused on explaining how the three different levels interact by taking the reader on a journey through the different levels going from the theoretical background to the practical applications. - Explains the links and interactions between the three different design levels of wireless communication transmitters: device, circuit, and system - Presents state-of-the-art, challenges, and future trends in the field of wireless communication systems - Covers all aspects of both mature and cutting-edge technologies for semiconductor devices for wireless communication applications - Many circuit designs outlining the limitations derived from the available transistor technologies and system requirements - Explains how new microwave measurement techniques can represent an essential tool for microwave modellers and designers

Download or read book mm Wave Silicon Power Amplifiers and Transmitters written by Hossein Hashemi and published by Cambridge University Press. This book was released on 2016-04-04 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build high-performance, energy-efficient circuits with this cutting-edge guide to designing, modeling, analysing, implementing and testing new mm-wave systems.

Download or read book RF and mm Wave Power Generation in Silicon written by Hua Wang and published by Academic Press. This book was released on 2015-12-10 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: RF and mm-Wave Power Generation in Silicon presents the challenges and solutions of designing power amplifiers at RF and mm-Wave frequencies in a silicon-based process technology. It covers practical power amplifier design methodologies, energy- and spectrum-efficient power amplifier design examples in the RF frequency for cellular and wireless connectivity applications, and power amplifier and power generation designs for enabling new communication and sensing applications in the mm-Wave and THz frequencies. With this book you will learn: - Power amplifier design fundamentals and methodologies - Latest advances in silicon-based RF power amplifier architectures and designs and their integration in wireless communication systems - State-of-the-art mm-Wave/THz power amplifier and power generation circuits and systems in silicon - Extensive coverage from fundamentals to advanced design topics, focusing on various layers of abstraction: from device modeling and circuit design strategy to advanced digital and mixed-signal architectures for highly efficient and linear power amplifiers - New architectures for power amplifiers in the cellar and wireless connectivity covering detailed design methodologies and state-of-the-art performances - Detailed design techniques, trade-off analysis and design examples for efficiency enhancement at power back-off and linear amplification for spectrally-efficient non-constant envelope modulations - Extensive coverage of mm-Wave power-generation techniques from the early days of the 60 GHz research to current state-of the-art reconfigurable, digital mm-Wave PA architectures - Detailed analysis of power generation challenges in the higher mm-Wave and THz frequencies and novel technical solutions for a wide range for potential applications, including ultrafast wireless communication to sensing, imaging and spectroscopy - Contributions from the world-class experts from both academia and industry

Download or read book Bandwidth and Efficiency Enhancement in Radio Frequency Power Amplifiers for Wireless Transmitters written by Karun Rawat and published by Springer Nature. This book was released on 2020-03-05 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on broadband power amplifier design for wireless communication. Nonlinear model embedding is described as a powerful tool for designing broadband continuous Class-J and continuous class F power amplifiers. The authors also discuss various techniques for extending bandwidth of load modulation based power amplifiers, such as Doherty power amplifier and Chireix outphasing amplifiers. The book also covers recent trends on digital as well as analog techniques to enhance bandwidth and linearity in wireless transmitters. Presents latest trends in designing broadband power amplifiers; Covers latest techniques for using nonlinear model embedding in designing power amplifiers based on waveform engineering; Describes the latest techniques for extending bandwidth of load modulation based power amplifiers such as Doherty power amplifier and Chireix outphasing amplifiers; Includes coverage of hybrid analog/digital predistortion as wideband solution for wireless transmitters; Discusses recent trends on on-chip power amplifier design with GaN /GaAs MMICs for high frequency applications.

Download or read book RF and Microwave Transmitter Design written by Andrei Grebennikov and published by John Wiley & Sons. This book was released on 2011-09-19 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: RF and Microwave Transmitter Design is unique in its coverage of both historical transmitter design and cutting edge technologies. This text explores the results of well-known and new theoretical analyses, while informing readers of modern radio transmitters' pracitcal designs and their components. Jam-packed with information, this book broadcasts and streamlines the author's considerable experience in RF and microwave design and development.

Download or read book Inverse system identification with applications in predistortion written by Ylva Jung and published by Linköping University Electronic Press. This book was released on 2018-12-19 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Models are commonly used to simulate events and processes, and can be constructed from measured data using system identification. The common way is to model the system from input to output, but in this thesis we want to obtain the inverse of the system. Power amplifiers (PAs) used in communication devices can be nonlinear, and this causes interference in adjacent transmitting channels. A prefilter, called predistorter, can be used to invert the effects of the PA, such that the combination of predistorter and PA reconstructs an amplified version of the input signal. In this thesis, the predistortion problem has been investigated for outphasing power amplifiers, where the input signal is decomposed into two branches that are amplified separately by highly efficient nonlinear amplifiers and then recombined. We have formulated a model structure describing the imperfections in an outphasing abbrPA and the matching ideal predistorter. The predistorter can be estimated from measured data in different ways. Here, the initially nonconvex optimization problem has been developed into a convex problem. The predistorters have been evaluated in measurements. The goal with the inverse models in this thesis is to use them in cascade with the systems to reconstruct the original input. It is shown that the problems of identifying a model of a preinverse and a postinverse are fundamentally different. It turns out that the true inverse is not necessarily the best one when noise is present, and that other models and structures can lead to better inversion results. To construct a predistorter (for a PA, for example), a model of the inverse is used, and different methods can be used for the estimation. One common method is to estimate a postinverse, and then using it as a preinverse, making it straightforward to try out different model structures. Another is to construct a model of the system and then use it to estimate a preinverse in a second step. This method identifies the inverse in the setup it will be used, but leads to a complicated optimization problem. A third option is to model the forward system and then invert it. This method can be understood using standard identification theory in contrast to the ones above, but the model is tuned for the forward system, not the inverse. Models obtained using the various methods capture different properties of the system, and a more detailed analysis of the methods is presented for linear time-invariant systems and linear approximations of block-oriented systems. The theory is also illustrated in examples. When a preinverse is used, the input to the system will be changed, and typically the input data will be different than the original input. This is why the estimation of preinverses is more complicated than for postinverses, and one set of experimental data is not enough. Here, we have shown that identifying a preinverse in series with the system in repeated experiments can improve the inversion performance.

Download or read book Proceedings of the 26th Conference of Spacecraft TT C Technology in China written by Rongjun Shen and published by Springer Science & Business Media. This book was released on 2012-09-29 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'Proceedings of the 26th Conference of Spacecraft TT&C Technology in China' collects selected papers from the 26th Conference of Spacecraft TT&C Technology in China held in Nanjing on October 16-19, 2012. The book features state-of-the-art studies on spacecraft TT&C in China with the theme of “Shared and Flexible TT&C Systems”. The selected works can help promote the technologies in standardization, informatization, communication networks and intelligence. Researchers and engineers in the field of aerospace engineering and communication engineering can benefit from the book. SHEN Rongjun is the Academician of Chinese Academy of Engineering; QIAN Weiping is the Director General of Beijing Institute of Tracking and Telecommunications Technology.