Download or read book An Experimental Investigation on Combustion and Engine Performance and Emissions of a Methane gasoline Dual fuel Optical Engine written by and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Experimental Investigation of Diesel ignited Gasoline and Diesel ignited Methane Dual Fuel Concepts in a Single Cylinder Research Engine written by Umang Dwivedi and published by . This book was released on 2013 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diesel-ignited gasoline and diesel-ignited methane dual fuel combustion experiments were performed in a single-cylinder research engine (SCRE), outfitted with a common-rail diesel injection system and a stand-alone engine controller. Gasoline was injected in the intake port using a port-fuel injector, whereas methane was fumigated into the intake manifold. The engine was operated at a constant speed of 1500 rev/min, a constant load of 5.2 bar IMEP, and a constant gasoline/methane energy substitution of 80%. Parameters such as diesel injection timing (SOI), diesel injection pressure, and boost pressure were varied to quantify their impact on engine performance and engineout ISNOx, ISHC, ISCO, and smoke emissions. The change in combustion process from heterogeneous combustion to HCCI like combustion was also observed.
Download or read book Ecology in Transport Problems and Solutions written by Aleksander Sładkowski and published by Springer Nature. This book was released on 2020-03-17 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book analyzes how transport influences the ecology of various regions. Integrating perspectives and approaches from around the globe, it examines the use of different types of engines and fuels, and assesses the impact of vehicle design on the environment. The book also addresses the effect of the transport situation in agglomerations on their environmental safety. Various types of environmental impacts are considered, from traditional emissions to noise and vibration. Presenting scientific advances from 7 European countries, the book appeals to experts, teachers and students, as well as to anyone interested in the environmental aspects of the transport industry.
Download or read book Advances in IC Engines and Combustion Technology written by Ashwani K. Gupta and published by Springer Nature. This book was released on 2020-08-18 with total page 939 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select peer-reviewed proceedings of the 26th National Conference on IC Engines and Combustion (NCICEC) 2019 which was organised by the Department of Mechanical Engineering, National Institute of Technology Kurukshetra under the aegis of The Combustion Institute-Indian Section (CIIS). The book covers latest research and developments in the areas of combustion and propulsion, exhaust emissions, gas turbines, hybrid vehicles, IC engines, and alternative fuels. The contents include theoretical and numerical tools applied to a wide range of combustion problems, and also discusses their applications. This book can be a good reference for engineers, educators and researchers working in the area of IC engines and combustion.
Download or read book Chemical Biological and Environmental Engineering Proceedings of the International Conference on Cbee 2009 written by Li Kai and published by World Scientific. This book was released on 2010 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Held in Singapore from 9 to 11 October 2009, the 2009 International Conference on Chemical, Biological and Environmental Engineering (CBEE 2009) aims to provide a platform for researchers, engineers, academicians as well as industrial professionals from all over the world to present their research and development activities in chemical, biological and environmental engineering. Conference delegates will also have the opportunity to exchange new ideas and application experiences, establish business or research relations and find global partners for future collaboration. Sample Chapter(s). Chapter 1: The Future of Biopharmaceutics'' Production (92 KB). Contents: Study on Pyrolysis Characteristics of Electronic Waste (J Sun et al.); Application of Noise Mapping on Environmental Management (K-T Tsai et al.); Characteristics and Transport Properties of Two Modified Zero Valent Iron (Y-H Lin et al.); Synthesis of Visible Light Active N-Doped Titania Photocatalyst (C Kusumawardani et al.); CFD-PBM Modeling of Vertical Bubbly Flows (M R Rahimi & H Karimi); Hydrotalcite-Like Synthesis Using Magnesium from Brine Water (E Heraldy et al.); Cement/Activated-Carbon Solidification/Stabilization Treatment of Nitrobenzene (Z Su et al.); Investigation of Fish Species Biodiversity in Haraz River (I Piri et al.); Risk Assessment of Fluoride in Indian Context (V Chaudhary & M Kumar); Light Transmission In Fluidized Bed (E Shahbazali et al.); Drying of Mushroom Using a Solar Tunnel Dryer (M A Basunia et al.); and other papers. Readership: Researchers, engineers, academicians and industrial professionals in related fields of chemical, biological and environmental engineering.
Download or read book Advanced Engine Diagnostics written by Avinash Kumar Agarwal and published by Springer. This book was released on 2018-11-07 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the discusses advanced fuels and combustion, emission control techniques, after-treatment systems, simulations and fault diagnostics, including discussions on different engine diagnostic techniques such as particle image velocimetry (PIV), phase Doppler interferometry (PDI), laser ignition. This volume bridges the gap between basic concepts and advanced research in internal combustion engine diagnostics, making it a useful reference for both students and researchers whose work focuses on achieving higher fuel efficiency and lowering emissions.
Download or read book Renewable Fuels for Sustainable Mobility written by Pravesh Chandra Shukla and published by Springer Nature. This book was released on 2023-05-06 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume discusses the use of renewable fuels for clean transportation and its applications on internal combustion engines. The contents focus on the key aspects of fuel production processes and its impact on various segments of the transportation sector and for sustainable mobility. Several kinds of fuels are assessed such as biofuels, alcohols, and hydrogen, and their effects on the combustion process are characterized by application. This volume will be of use to those working in academia and industry as well as energy experts and policy makers.
Download or read book Experimental Investigation of Gasoline di methyl Ether Dual Fuel CAI Combustion with Internal EGR written by Haofan Zhang and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A new dual fuel Controlled Auto-Ignition (CA!) combustion concept was proposed and researched for lower exhaust emissions and better fuel economy. The concept takes the advantage of the complementary physical and chemical properties of high octane number gasoline and high cetane number Di-Methyl Ether (DME) to organize the combustion process. Homogeneous gasoline/air mixture is utilized as the main combustible charge, which is realised by a low-cost Port Fuel Injection (PFI) system. Pressurised DME is directly injected into cylinder via a commercial Gasoline Direct Injection (GDI) injector. Flexible DME injection strategies are employed to realise the controlled auto ignition of the premixed charge. The engine is operated at Wide Open Throttle (WOT) in the entire operating region in order to minimize the intake pumping loss. Engine load is controlled by varying the amount of internal Exhaust Gas Recirculation (iEGR) which is achieved and adjusted by Positive Valve Overlap (PVO) and/or exhaust back pressure, and exhaust re- breathing method. The premixed mixture can be of either stoichiometric air/fuel ratio or fuel lean mixture and is heated and diluted by recycled exhaust gases. The use of internal EGR is considered as a very effective method to initiate CAI combustion due to its heating effect and moderation of the heat release rate by its dilution effect. In addition, the new combustion concept is compared to conventional SI combustion. The results indicate that the new combustion concept has potential for high efficiency, low emissions, enlargement of the engine operational region and flexible control of CAI combustion.
Download or read book Application of Clean Fuels in Combustion Engines written by Gabriele Di Blasio and published by Springer Nature. This book was released on 2022-01-04 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the impact of fuels characteristics and their effects on the combustion processes in internal combustion engines. It includes the analysis of a variety of biofuels (alcohol fuels and biodiesel) and biogases (natural gas, hydrogen, etc.), providing valuable information related to consequent effects on performance and emissions. The contents focus on recent results and current trends of fuel utilization in the transport sector. State-of-the-art of clean fuels application are also discussed. Thighs book will be of interest to those in academia and industry involved in fuels, IC engines, engine instrumentation, and environmental research.
Download or read book Natural Gas Engines written by Kalyan Kumar Srinivasan and published by Springer. This book was released on 2018-11-03 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the various advanced reciprocating combustion engine technologies that utilize natural gas and alternative fuels for transportation and power generation applications. It is divided into three major sections consisting of both fundamental and applied technologies to identify (but not limited to) clean, high-efficiency opportunities with natural gas fueling that have been developed through experimental protocols, numerical and high-performance computational simulations, and zero-dimensional, multizone combustion simulations. Particular emphasis is placed on statutes to monitor fine particulate emissions from tailpipe of engines operating on natural gas and alternative fuels.
Download or read book Gasoline Additives written by Vahid Pirouzfar and published by Walter de Gruyter GmbH & Co KG. This book was released on 2022-10-24 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gasoline – the most common petroleum product comes in several types or grades. Straight-run gasoline is generated solely by crude oil distillation. Crack gasoline, derived by thermal or catalytic breaking of heavier oil fractions, accounts for the majority of gasoline used in automobile and aviation. Straight-run gasoline, fractured gasoline, reformed and synthetic gasoline, and additives are used to create a wide range of gasoline kinds.
Download or read book Engine Combustion Instrumentation and Diagnostics written by Hua Zhao and published by SAE International. This book was released on 2001-01-30 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a complete description of instrumentation and in-cylinder measurement techniques for internal combustion engines. Written primarily for researchers and engineers involved in advanced research and development of internal combustion engines, the book provides an introduction to the instrumentation and experimental techniques, with particular emphasis on diagnostic techniques for in-cylinder measurements.
Download or read book Automotive Fuels Reference Book written by Paul Richards and published by SAE International. This book was released on 2014-03-05 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first two editions of this title, published by SAE International in 1990 and 1995, have been best-selling definitive references for those needing technical information about automotive fuels. This long-awaited new edition has been thoroughly revised and updated, yet retains the original fundamental fuels information that readers find so useful. This book is written for those with an interest in or a need to understand automotive fuels. Because automotive fuels can no longer be developed in isolation from the engines that will convert the fuel into the power necessary to drive our automobiles, knowledge of automotive fuels will also be essential to those working with automotive engines. Small quantities of fuel additives increasingly play an important role in bridging the gap that often exists between fuel that can easily be produced and fuel that is needed by the ever-more sophisticated automotive engine. This book pulls together in a single, extensively referenced volume, the three different but related topics of automotive fuels, fuel additives, and engines, and shows how all three areas work together. It includes a brief history of automotive fuels development, followed by chapters on automotive fuels manufacture from crude oil and other fossil sources. One chapter is dedicated to the manufacture of automotive fuels and fuel blending components from renewable sources. The safe handling, transport, and storage of fuels, from all sources, are covered. New combustion systems to achieve reduced emissions and increased efficiency are discussed, and the way in which the fuels’ physical and chemical characteristics affect these combustion processes and the emissions produced are included. There is also discussion on engine fuel system development and how these different systems affect the corresponding fuel requirements. Because the book is for a global market, fuel system technologies that only exist in the legacy fleet in some markets are included. The way in which fuel requirements are developed and specified is discussed. This covers test methods from simple laboratory bench tests, through engine testing, and long-term test procedures.
Download or read book Modelling Diesel Combustion written by P. A. Lakshminarayanan and published by Springer Science & Business Media. This book was released on 2010-03-03 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phenomenology of Diesel Combustion and Modeling Diesel is the most efficient combustion engine today and it plays an important role in transport of goods and passengers on land and on high seas. The emissions must be controlled as stipulated by the society without sacrificing the legendary fuel economy of the diesel engines. These important drivers caused innovations in diesel engineering like re-entrant combustion chambers in the piston, lower swirl support and high pressure injection, in turn reducing the ignition delay and hence the nitric oxides. The limits on emissions are being continually reduced. The- fore, the required accuracy of the models to predict the emissions and efficiency of the engines is high. The phenomenological combustion models based on physical and chemical description of the processes in the engine are practical to describe diesel engine combustion and to carry out parametric studies. This is because the injection process, which can be relatively well predicted, has the dominant effect on mixture formation and subsequent course of combustion. The need for improving these models by incorporating new developments in engine designs is explained in Chapter 2. With “model based control programs” used in the Electronic Control Units of the engines, phenomenological models are assuming more importance now because the detailed CFD based models are too slow to be handled by the Electronic Control Units. Experimental work is necessary to develop the basic understanding of the pr- esses.
Download or read book Alternative Fuels and Their Utilization Strategies in Internal Combustion Engines written by Akhilendra Pratap Singh and published by Springer Nature. This book was released on 2019-10-10 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers alternative fuels and their utilization strategies in internal combustion engines. The main objective of this book is to provide a comprehensive overview of the recent advances in the production and utilization aspects of different types of liquid and gaseous alternative fuels. In the last few years, methanol and DME have gained significant attention of the energy sector, because of their capability to be utilized in different types of engines. This book will be a valuable resource for researchers and practicing engineers alike.
Download or read book Handbook of Clean Energy Systems 6 Volume Set written by Jinyue Yan and published by John Wiley & Sons. This book was released on 2015-06-22 with total page 4038 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Clean Energy Systems brings together an international team of experts to present a comprehensive overview of the latest research, developments and practical applications throughout all areas of clean energy systems. Consolidating information which is currently scattered across a wide variety of literature sources, the handbook covers a broad range of topics in this interdisciplinary research field including both fossil and renewable energy systems. The development of intelligent energy systems for efficient energy processes and mitigation technologies for the reduction of environmental pollutants is explored in depth, and environmental, social and economic impacts are also addressed. Topics covered include: Volume 1 - Renewable Energy: Biomass resources and biofuel production; Bioenergy Utilization; Solar Energy; Wind Energy; Geothermal Energy; Tidal Energy. Volume 2 - Clean Energy Conversion Technologies: Steam/Vapor Power Generation; Gas Turbines Power Generation; Reciprocating Engines; Fuel Cells; Cogeneration and Polygeneration. Volume 3 - Mitigation Technologies: Carbon Capture; Negative Emissions System; Carbon Transportation; Carbon Storage; Emission Mitigation Technologies; Efficiency Improvements and Waste Management; Waste to Energy. Volume 4 - Intelligent Energy Systems: Future Electricity Markets; Diagnostic and Control of Energy Systems; New Electric Transmission Systems; Smart Grid and Modern Electrical Systems; Energy Efficiency of Municipal Energy Systems; Energy Efficiency of Industrial Energy Systems; Consumer Behaviors; Load Control and Management; Electric Car and Hybrid Car; Energy Efficiency Improvement. Volume 5 - Energy Storage: Thermal Energy Storage; Chemical Storage; Mechanical Storage; Electrochemical Storage; Integrated Storage Systems. Volume 6 - Sustainability of Energy Systems: Sustainability Indicators, Evaluation Criteria, and Reporting; Regulation and Policy; Finance and Investment; Emission Trading; Modeling and Analysis of Energy Systems; Energy vs. Development; Low Carbon Economy; Energy Efficiencies and Emission Reduction. Key features: Comprising over 3,500 pages in 6 volumes, HCES presents a comprehensive overview of the latest research, developments and practical applications throughout all areas of clean energy systems, consolidating a wealth of information which is currently scattered across a wide variety of literature sources. In addition to renewable energy systems, HCES also covers processes for the efficient and clean conversion of traditional fuels such as coal, oil and gas, energy storage systems, mitigation technologies for the reduction of environmental pollutants, and the development of intelligent energy systems. Environmental, social and economic impacts of energy systems are also addressed in depth. Published in full colour throughout. Fully indexed with cross referencing within and between all six volumes. Edited by leading researchers from academia and industry who are internationally renowned and active in their respective fields. Published in print and online. The online version is a single publication (i.e. no updates), available for one-time purchase or through annual subscription.
Download or read book Experimental Investigation of Manifold Gases of High Speed Internal Combustion Engines by Commercial Indicators written by James Ray Schermerhorn and published by . This book was released on 1928 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
