Download or read book Dissertation Abstracts International written by and published by . This book was released on 1992 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bibliography and Index of Geology written by and published by . This book was released on 1992 with total page 1592 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Porous Media written by Kambiz Vafai and published by CRC Press. This book was released on 2005-03-30 with total page 771 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last three decades, advances in modeling flow, heat, and mass transfer through a porous medium have dramatically transformed engineering applications. Comprehensive and cohesive, Handbook of Porous Media, Second Edition presents a compilation of research related to heat and mass transfer including the development of practical applications
Download or read book Modeling Groundwater Flow and Contaminant Transport written by Jacob Bear and published by Springer Science & Business Media. This book was released on 2010-01-18 with total page 851 pages. Available in PDF, EPUB and Kindle. Book excerpt: In many parts of the world, groundwater resources are under increasing threat from growing demands, wasteful use, and contamination. To face the challenge, good planning and management practices are needed. A key to the management of groundwater is the ability to model the movement of fluids and contaminants in the subsurface. The purpose of this book is to construct conceptual and mathematical models that can provide the information required for making decisions associated with the management of groundwater resources, and the remediation of contaminated aquifers. The basic approach of this book is to accurately describe the underlying physics of groundwater flow and solute transport in heterogeneous porous media, starting at the microscopic level, and to rigorously derive their mathematical representation at the macroscopic levels. The well-posed, macroscopic mathematical models are formulated for saturated, single phase flow, as well as for unsaturated and multiphase flow, and for the transport of single and multiple chemical species. Numerical models are presented and computer codes are reviewed, as tools for solving the models. The problem of seawater intrusion into coastal aquifers is examined and modeled. The issues of uncertainty in model input data and output are addressed. The book concludes with a chapter on the management of groundwater resources. Although one of the main objectives of this book is to construct mathematical models, the amount of mathematics required is kept minimal.
Download or read book Percolation Theory for Flow in Porous Media written by Allen Hunt and published by Springer Science & Business Media. This book was released on 2009-05-05 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Why would we wish to start a 2nd edition of “Percolation theory for ?ow in porous media” only two years after the ?rst one was ?nished? There are essentially three reasons: 1) Reviews in the soil physics community have pointed out that the introductory material on percolation theory could have been more accessible. Our additional experience in teaching this material led us to believe that we could improve this aspect of the book. In the context of rewriting the ?rst chapter, however, we also expanded the discussion of Bethe lattices and their relevance for “classical” - ponents of percolation theory, thus giving more of a basis for the discussion of the relevance of hyperscaling. This addition, though it will not tend to make the book more accessible to hydrologists, was useful in making it a more complete reference, and these sections have been marked as being possible to omit in a ?rst reading. It also forced a division of the ?rst chapter into two. We hope that physicists without a background in percolation theory will now also ?nd the - troductory material somewhat more satisfactory. 2) We have done considerable further work on problems of electrical conductivity, thermal conductivity, and electromechanical coupling.
Download or read book Adsorption by Powders and Porous Solids written by Jean Rouquerol and published by Academic Press. This book was released on 2013-09-06 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The declared objective of this book is to provide an introductory review of the various theoretical and practical aspects of adsorption by powders and porous solids with particular reference to materials of technological importance. The primary aim is to meet the needs of students and non-specialists who are new to surface science or who wish to use the advanced techniques now available for the determination of surface area, pore size and surface characterization. In addition, a critical account is given of recent work on the adsorptive properties of activated carbons, oxides, clays and zeolites. - Provides a comprehensive treatment of adsorption at both the gas/solid interface and the liquid/solid interface - Includes chapters dealing with experimental methodology and the interpretation of adsorption data obtained with porous oxides, carbons and zeolites - Techniques capture the importance of heterogeneous catalysis, chemical engineering and the production of pigments, cements, agrochemicals, and pharmaceuticals
Download or read book Seawater Intrusion in Coastal Aquifers written by Jacob Bear and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coastal aquifers serve as major sources for freshwater supply in many countries around the world, especially in arid and semi-arid zones. Many coastal areas are also heavily urbanized, a fact that makes the need for freshwater even more acute. Coastal aquifers are highly sensitive to disturbances. Inappropriate management of a coastal aquifer may lead to its destruction as a source for freshwater much earlier than other aquifers which are not connected to the sea. The reason is the threat of seawater intrusion. In many coastal aquifers, intrusion of seawater has become one of the major constraints imposed on groundwater utilization. As sea water intrusion progresses, existing pumping wells, especially those close to the coast, become saline and have to be abandoned. Also, the area above the intruding seawater wedge is lost as a source of natural replenishment to the aquifer. Despite the importance of this subject, so far there does not exist a book that integrates our present knowledge of seawater intrusion, its occurrences, physical mechanism, chemistry, exploration by geo physical and geochemical techniques, conceptual and mathematical modeling, analytical and numerical solution methods, engineering measures of combating seawater intrusion, management strategies, and experience learned from case studies. By presenting this fairly comprehensive volume on the state-of-the-art of knowledge and ex perience on saltwater intrusion, we hoped to transfer this body of knowledge to the geologists, hydrologists, hydraulic engineers, water resources planners, managers, and governmental policy makers, who are engaged in the sustainable development of coastal fresh ground water resources.
Download or read book An Introduction to Reservoir Simulation Using MATLAB GNU Octave written by Knut-Andreas Lie and published by Cambridge University Press. This book was released on 2019-08-08 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents numerical methods for reservoir simulation, with efficient implementation and examples using widely-used online open-source code, for researchers, professionals and advanced students. This title is also available as Open Access on Cambridge Core.
Download or read book Subsurface Hydrology written by George F. Pinder and published by John Wiley & Sons. This book was released on 2006-09-29 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: With an emphasis on methodology, this reference provides a comprehensive examination of water movement as well as the movement of various pollutants in the earth's subsurface. The multidisciplinary approach integrates earth science, fluid mechanics, mathematics, statistics, and chemistry. Ideal for both professionals and students, this is a practical guide to the practices, procedures, and rules for dealing with groundwater.
Download or read book Characterization Modeling Monitoring and Remediation of Fractured Rock written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2021-01-29 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fractured rock is the host or foundation for innumerable engineered structures related to energy, water, waste, and transportation. Characterizing, modeling, and monitoring fractured rock sites is critical to the functioning of those infrastructure, as well as to optimizing resource recovery and contaminant management. Characterization, Modeling, Monitoring, and Remediation of Fractured Rock examines the state of practice and state of art in the characterization of fractured rock and the chemical and biological processes related to subsurface contaminant fate and transport. This report examines new developments, knowledge, and approaches to engineering at fractured rock sites since the publication of the 1996 National Research Council report Rock Fractures and Fluid Flow: Contemporary Understanding and Fluid Flow. Fundamental understanding of the physical nature of fractured rock has changed little since 1996, but many new characterization tools have been developed, and there is now greater appreciation for the importance of chemical and biological processes that can occur in the fractured rock environment. The findings of Characterization, Modeling, Monitoring, and Remediation of Fractured Rock can be applied to all types of engineered infrastructure, but especially to engineered repositories for buried or stored waste and to fractured rock sites that have been contaminated as a result of past disposal or other practices. The recommendations of this report are intended to help the practitioner, researcher, and decision maker take a more interdisciplinary approach to engineering in the fractured rock environment. This report describes how existing tools-some only recently developed-can be used to increase the accuracy and reliability of engineering design and management given the interacting forces of nature. With an interdisciplinary approach, it is possible to conceptualize and model the fractured rock environment with acceptable levels of uncertainty and reliability, and to design systems that maximize remediation and long-term performance. Better scientific understanding could inform regulations, policies, and implementation guidelines related to infrastructure development and operations. The recommendations for research and applications to enhance practice of this book make it a valuable resource for students and practitioners in this field.
Download or read book Modelling and Applications of Transport Phenomena in Porous Media written by Jacob Bear and published by Springer Science & Business Media. This book was released on 1991-11-30 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transport phenomenain porous media are encounteredin various disciplines, e. g. , civil engineering, chemical engineering, reservoir engineering, agricul tural engineering and soil science. In these disciplines, problems are en countered in which various extensive quantities, e. g. , mass and heat, are transported through a porous material domain. Often, the void space of the porous material contains two or three fluid phases, and the various ex tensive quantities are transported simultaneously through the multiphase system. In all these disciplines, decisions related to a system's development and its operation have to be made. To do so a tool is needed that will pro vide a forecast of the system's response to the implementation of proposed decisions. This response is expressed in the form of spatial and temporal distributions of the state variables that describe the system's behavior. Ex amples of such state variables are pressure, stress, strain, density, velocity, solute concentration, temperature, etc. , for each phase in the system, The tool that enables the required predictions is the model. A model may be defined as a simplified version of the real porous medium system and the transport phenomena that occur in it. Because the model is a sim plified version of the real system, no unique model exists for a given porous medium system. Different sets of simplifying assumptions, each suitable for a particular task, will result in different models.
Download or read book Principles of Heat Transfer in Porous Media written by M. Kaviany and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the empirical treatment of fluid flow and heat transfer in porous media is over a century old, only in the last three decades has the transport in these heterogeneous systems been addressed in detail. So far, single-phase flows in porous media have been treated or at least formulated satisfactorily, while the subject of two-phase flow and the related heat-transfer in porous media is still in its infancy. This book identifies the principles of transport in porous media and compares the avalaible predictions based on theoretical treatments of various transport mechanisms with the existing experimental results. The theoretical treatment is based on the volume-averaging of the momentum and energy equations with the closure conditions necessary for obtaining solutions. While emphasizing a basic understanding of heat transfer in porous media, this book does not ignore the need for predictive tools; whenever a rigorous theoretical treatment of a phenomena is not avaliable, semi-empirical and empirical treatments are given.
Download or read book Multiphase Flow in Permeable Media written by Martin J. Blunt and published by Cambridge University Press. This book was released on 2017-02-16 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a fundamental description of multiphase fluid flow through porous rock, based on understanding movement at the pore, or microscopic, scale.
Download or read book Groundwater Hydraulics written by Kuniaki Sato and published by Springer Science & Business Media. This book was released on 2011-06-28 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: The groundwater science and engineering has been closely connected with various fields (1) Groundwater Hydrology, (2) Groundwater Hydraulics or Geohydraulics, (3) Fluid Dynamics in Porous Media, (4) Groundwater Quality Engineering, (5) Soil Physics, and (6) Hydrogeology or Geohydrology. The purpose of the book is to present an update textbook of groundwater hydraulics, which includes all of basic items in above-mentioned fields, to students (of graduate school), researchers and practitioners. The students and beginners who intend to specialize in groundwater hydraulics through one semester will master contents of the book.
Download or read book IUTAM Symposium on Physicochemical and Electromechanical Interactions in Porous Media written by Jacques P. Huyghe and published by Springer Science & Business Media. This book was released on 2005-10-18 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decades, new experimental and numerical techniques have taken many advanced features of porous media mechanics down to practical engineering applications. This happened in areas that sometimes were not even suspected to be open to engineering ideas at all. The challenge that often faces engineers in the field of geomechanics, biomechanics, rheology and materials science is the translation of ideas existing in one field to solutions in the other. The purpose of the IUTAM symposium from which this proceedings volume has been compiled was to dive deep into the mechanics of those porous media that involve mechanics and chemistry, mechanics and electromagnetism, mechanics and thermal fluctuations of mechanics and biology. The different sections have purposely not been formed according to field interest, but on the basis of the physics involved.
Download or read book Drying of Porous Materials written by Stefan Jan Kowalski and published by Springer Science & Business Media. This book was released on 2007-04-30 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides recent advances in research on drying of particulate and porous materials. It is based on a selection of papers presented at the XI Polish Drying Symposium 2005. The contributions cover theoretical, as well as experimental and modeling research on heat and mass transfer processes during drying of porous material and fluidized beds. The book is a pioneering contribution to the science and technology of drying of particulate solids.
Download or read book Fractured Porous Media written by Pierre M. Adler and published by Oxford University Press, USA. This book was released on 2013 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic treatment of the geometrical and transport properties of fractures, fracture networks, and fractured porous media. It is divided into two major parts. The first part deals with geometry of individual fractures and of fracture networks. The use of the dimensionless density rationalizes the results for the percolation threshold of the networks. It presents the crucial advantage of grouping the numerical data for various fracture shapes. The second part deals mainly with permeability under steady conditions of fractures, fracture networks, and fractured porous media. Again the results for various types of networks can be rationalized by means of the dimensionless density. A chapter is dedicated to two phase flow in fractured porous media.
