Download or read book Biodiesel Production Technologies written by Jorge Mario Marchetti and published by . This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biodiesel production is a very modern and technological area that is winning relevance and market due to its benefits, such as that it is biodegradable, a renewable and alternative source of fuel with less pollutants and less particle pollution. Different studies have been carried out using various oils as raw material, different alcohol as well as different catalysts, homogeneous ones such as sodium hydroxide, potassium hydroxide, sulphuric acid and supercritical fluids, and heterogeneous ones such as solid resins and enzymes as well as new technologies that are being developed every day. This book discusses the global energy situation in regard to the biodiesel industry, as well as a specific focus on operational conditions, kinetics model and economic comparison in order to see if they could be used as profitable alternatives.
Download or read book Energy Efficiency in Mobility Systems written by Shaharin Anwar Sulaiman and published by Springer Nature. This book was released on 2019-10-03 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights a diverse range of initiatives that have been launched to attain sustainable mobility systems, in particular regarding the energy efficiency aspect. It offers a valuable reference for various stakeholders in transportation systems, while also sharing new ideas on how transportation can meet the challenges of tomorrow.
Download or read book Heating and Evaporation of Multi Component Fuel Droplets written by Mansour Al Qubeissi and published by BoD – Books on Demand. This book was released on 2015-08-01 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book documents pioneering mathematical models introduced for the simulation of multi-component droplets heating and evaporation processes which are implementable into commercial CFD codes. These models, described as 'multi-dimensional quasi discrete' (MDQD) and 'discrete-component' models, were applied to automotive fuel droplets in experimentally measured internal combustion engine conditions for biodiesel, diesel, and gasoline fuels. For instance, it is shown that the suggested models lead to accurate predictions of temperatures and evaporation times in typical diesel and gasoline engine conditions. Such models have also reduced CPU time about 85% compared with cases when classical approaches are used.
Download or read book Characteristics and Control of Low Temperature Combustion Engines written by Rakesh Kumar Maurya and published by Springer. This book was released on 2017-11-03 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with novel advanced engine combustion technologies having potential of high fuel conversion efficiency along with ultralow NOx and particulate matter (PM) emissions. It offers insight into advanced combustion modes for efficient utilization of gasoline like fuels. Fundamentals of various advanced low temperature combustion (LTC) systems such as HCCI, PCCI, PPC and RCCI engines and their fuel quality requirements are also discussed. Detailed performance, combustion and emissions characteristics of futuristic engine technologies such as PPC and RCCI employing conventional as well as alternative fuels are analyzed and discussed. Special emphasis is placed on soot particle number emission characterization, high load limiting constraints, and fuel effects on combustion characteristics in LTC engines. For closed loop combustion control of LTC engines, sensors, actuators and control strategies are also discussed. The book should prove useful to a broad audience, including graduate students, researchers, and professionals Offers novel technologies for improved and efficient utilization of gasoline like fuels; Deals with most advanced and futuristic engine combustion modes such as PPC and RCCI; Comprehensible presentation of the performance, combustion and emissions characteristics of low temperature combustion (LTC) engines; Deals with closed loop combustion control of advanced LTC engines; State-of-the-art technology book that concisely summarizes the recent advancements in LTC technology. .
Download or read book Recent Trends in Mechanical Engineering written by G. S. V. L. Narasimham and published by Springer Nature. This book was released on 2020-10-30 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of peer-reviewed proceedings from the International Conference on Innovations in Mechanical Engineering (ICIME 2020). The contents cover latest research in all major areas of mechanical engineering, and are broadly divided into five parts: (i) thermal engineering, (ii) design and optimization, (iii) production and industrial engineering, (iv) materials science and metallurgy, and (v) multidisciplinary topics. Different aspects of designing, modeling, manufacturing, optimizing, and processing are discussed in the context of emerging applications. Given the range of topics covered, this book can be useful for students, researchers as well as professionals.
Download or read book Annual Index abstracts of SAE Technical Papers written by and published by . This book was released on 1986 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Formulation Technology written by Hans Mollet and published by John Wiley & Sons. This book was released on 2008-11-21 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many chemical substances or compounds - organic or inorganic, natural or synthetic - are not used in their pure form. In order for the active ingredient to be most effective or to obtain the ideal delivery form for the market, the actual synthesis and purification steps are followed by formulation to give end products that range from powders, agglomerates, and granules to suspensions, emulsions, microemulsions, microcapsules, instant preparations, liposomes, and tablets. Formulation combines colloid and surface chemistry with chemical process engineering; sometimes it consists of a simple mixing operation, sometimes it requires an entire series of rather complicated engineering procedures such as comminution, dispersion, emulsification, agglomeration or drying. This book covers basic physico-chemical theory as well as its applications in the chemical industry for the production of pharmaceuticals, agrochemicals, pigments and dyes, food, detergents, cosmetics and many other products; it also provides chemists and chemical engineers with the necessary practical tools for the understanding of the structure/ activity relationship.
Download or read book Cumulative Index of The SAE Papers written by Society of Automotive Engineers and published by . This book was released on 1965 with total page 1646 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of International Conference in Mechanical and Energy Technology written by Sanjay Yadav and published by Springer Nature. This book was released on 2020-06-01 with total page 799 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected peer-reviewed papers from the International Conference on Mechanical and Energy Technologies, which was held on 7–8 November 2019 at Galgotias College of Engineering and Technology, Greater Noida, India. The book reports on the latest developments in the field of mechanical and energy technology in contributions prepared by experts from academia and industry. The broad range of topics covered includes aerodynamics and fluid mechanics, artificial intelligence, nonmaterial and nonmanufacturing technologies, rapid manufacturing technologies and prototyping, remanufacturing, renewable energies technologies, metrology and computer-aided inspection, etc. Accordingly, the book offers a valuable resource for researchers in various fields, especially mechanical and industrial engineering, and energy technologies.
Download or read book Climate change 2007 written by Terry Barker and published by . This book was released on 2007 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This summary of the Intergovernmental Panel on Climate Change represents the formally agreed statement concerning climate change mitigation. It focuses on new literature on the scientific, technological, environmental, economic & social aspects of mitigation of climate change, pub. since the 3rd Assessment Report & the Special Reports on CO2 Capture & Storage & on Safeguarding the Ozone Layer & the Global Climate System. Contents: Greenhouse gas emission trends; Mitigation in the short & medium term across different economic sectors (until 2030); Mitigation in the long-term & beyond 2030; Policies, measures & instruments to mitigate climate change; Sustainable develop. & climate change mitigation; & Gaps in knowledge. Illus.
Download or read book Recent Advances in Sustainable Technologies written by Kanishka Jha and published by Springer Nature. This book was released on 2021-05-17 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Advances in Sustainable Technologies (ICAST 2020), organized by Lovely Professional University, Punjab, India. The topics covered in this book are multidisciplinary in nature. The primary topics included in the book are from the domains of automobile engineering, mechatronics, material science and engineering, aerospace engineering, bio-mechanics, biomedical instrumentation, mathematical techniques, agricultural engineering, nuclear engineering, physics, biodynamic modelling and ergonomics etc. The contents of this book will be beneficial for beginners, researchers, and professionals alike.
Download or read book Algae Energy written by Ayhan Demirbas and published by Springer Science & Business Media. This book was released on 2010-07-10 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Algae Energy covers the production of algae culture and the usage of algal biomass conversion products. It also reviews modern biomass-based transportation fuels, including biodiesel, bio-oil, biomethane and biohydrogen. Each chapter opens with fundamental explanations suitable for those with a general interest in algae energy and goes on to provide in-depth scientific details for more expert readers. Algae energy is discussed within the wider context of green energy, with chapters covering topics such as: green energy facilities, algae technology, energy from algae and biodiesel from algae. Algae Energy addresses the needs of energy researchers, chemical engineers, fuel and environmental engineers, postgraduate and advanced undergraduate students, and others interested in a practical tool for pursuing their interest in bio-energy.
Download or read book Engine Exhaust Particulates written by Avinash Kumar Agarwal and published by Springer. This book was released on 2018-11-01 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comparative analysis of both diesel and gasoline engine particulates, and also of the emissions resulting from the use of alternative fuels. Written by respected experts, it offers comprehensive insights into motor vehicle particulates, their formation, composition, location, measurement, characterisation and toxicology. It also addresses exhaust-gas treatment and legal, measurement-related and technological advancements concerning emissions. The book will serve as a valuable resource for academic researchers and professional automotive engineers alike.
Download or read book Biodiesel Handling and Use Guidelines 3rd Ed written by K. S. Tyson and published by DIANE Publishing. This book was released on 2009-05 with total page 69 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide for those who blend, distribute, and use biodiesel and biodiesel blends. Will help fleets and individual users, blenders, distributors, and those involved in related activities understand procedures for handling and using biodiesel fuels. Biodiesel is a renewable fuel manufactured from vegetable oils, animal fats, and recycled cooking oils. It offers many advantages: It is renewable; It is energy efficient; It displaces petroleum derived diesel fuel; It can be used in most diesel equipment with no or only minor modifications; It can reduce global warming gas emissions; It can reduce tailpipe emissions; It is nontoxic, biodegradable, and suitable for sensitive environ; It is made in the U.S. from either ag. or recycled resources; and it is easy to use.
Download or read book Nanotechnology for Bioenergy and Biofuel Production written by Mahendra Rai and published by Springer. This book was released on 2016-12-19 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique feature of this book is its focus on nanotechnological solutions for the production of bioenergy and biofuels. Coverage includes topics such as nanobiotechnology, microalgae, biofuel cells, biomass pretreatment, and biomass conversion. An international team of experts also addresses the need to precisely characterize nanoparticles and the role of catalysts. The range of topics addressed, together with a chapter on risk management, make this book a highly useful resource for a broad readership including physicists, chemists, microbiologists, biotechnologists, food technologists, agricultural engineers, and nanotechnologists.
Download or read book Prospects of Alternative Transportation Fuels written by Akhilendra P Singh and published by Springer. This book was released on 2017-11-28 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses different types of alternative fuels, including biodiesel, alcohol, synthetic fuels, compressed natural gas (CNG) and its blend with hydrogen, HCNG, and provides detailed information on the utilization of these alternative fuels in internal combustion (IC) engines. Further, it presents methods for production of these alternative fuels and explores advanced combustion techniques, such as low-temperature and dual-fuel combustion, using alternative fuels. It includes a chapter on the soot morphology of biodiesel, which focuses on the toxicity. There are also four chapters on hydrogen-fueled engines, which discuss use of hydrogen in IC engines and also provide important information on the methodologies. This book is a valuable resource for researchers and practicing engineers alike.
Download or read book Atomization and Sprays written by Arthur H. Lefebvre and published by CRC Press. This book was released on 2017-03-27 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this long-time bestseller provides a framework for designing and understanding sprays for a wide array of engineering applications. The text contains correlations and design tools that can be easily understood and used in relating the design of atomizers to the resulting spray behavior. Written to be accessible to readers with a modest technical background, the emphasis is on application rather than in-depth theory. Numerous examples are provided to serve as starting points for using the information in the book. Overall, this is a thoroughly updated edition that still retains the practical focus and readability of the original work by Arthur Lefebvre.
