Download or read book An Experimental Investigation of Flow Regime Maps Involving Coiled Fluted Tubes written by Richard N. Bohon and published by . This book was released on 1992 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the ASME Fluids Engineering Division written by and published by . This book was released on 1997 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1998 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Compact Heat Exchangers written by J.E. Hesselgreaves and published by Elsevier. This book was released on 2001-05-08 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the ideas and industrial concepts in compact heat exchanger technology that have been developed in the last 10 years or so. Historically, the development and application of compact heat exchangers and their surfaces has taken place in a piecemeal fashion in a number of rather unrelated areas, principally those of the automotive and prime mover, aerospace, cryogenic and refrigeration sectors. Much detailed technology, familiar in one sector, progressed only slowly over the boundary into another sector. This compartmentalisation was a feature both of the user industries themselves, and also of the supplier, or manufacturing industries. These barriers are now breaking down, with valuable cross-fertilisation taking place. One of the industrial sectors that is waking up to the challenges of compact heat exchangers is that broadly defined as the process sector. If there is a bias in the book, it is towards this sector. Here, in many cases, the technical challenges are severe, since high pressures and temperatures are often involved, and working fluids can be corrosive, reactive or toxic. The opportunities, however, are correspondingly high, since compacts can offer a combination of lower capital or installed cost, lower temperature differences (and hence running costs), and lower inventory. In some cases they give the opportunity for a radical re-think of the process design, by the introduction of process intensification (PI) concepts such as combining process elements in one unit. An example of this is reaction and heat exchange, which offers, among other advantages, significantly lower by-product production.To stimulate future research, the author includes coverage of hitherto neglected approaches, such as that of the Second Law (of Thermodynamics), pioneered by Bejan and co- workers. The justification for this is that there is increasing interest in life-cycle and sustainable approaches to industrial activity as a whole, often involving exergy (Second Law) analysis. Heat exchangers, being fundamental components of energy and process systems, are both savers and spenders of exergy, according to interpretation.
Download or read book Rules of Thumb for Mechanical Engineers written by J. Edward Pope and published by Gulf Professional Publishing. This book was released on 1997 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluids -- Heat transfer -- Thermodynamics -- Mechanical seals -- Pumps and compressors -- Drivers -- Gears -- Bearings -- Piping and pressure vessels -- Tribology -- Vibration -- Materials -- Stress and strain -- Fatigue -- Instrumentation -- Engineering economics.
Download or read book Introduction to Plasma Physics written by R.J Goldston and published by CRC Press. This book was released on 2020-07-14 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Plasma Physics is the standard text for an introductory lecture course on plasma physics. The text’s six sections lead readers systematically and comprehensively through the fundamentals of modern plasma physics. Sections on single-particle motion, plasmas as fluids, and collisional processes in plasmas lay the groundwork for a thorough understanding of the subject. The authors take care to place the material in its historical context for a rich understanding of the ideas presented. They also emphasize the importance of medical imaging in radiotherapy, providing a logical link to more advanced works in the area. The text includes problems, tables, and illustrations as well as a thorough index and a complete list of references.
Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2013-09-21 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Extrusion is designed to aid operators, engineers, and managers in extrusion processing in quickly answering practical day-to-day questions. The first part of the book provides the fundamental principles, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. The next section covers advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. The final part provides applications case studies in key areas for engineers such as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. This practical guide to extrusion brings together both equipment and materials processing aspects. It covers basic and advanced topics, for reference and training, in thermoplastics processing in the extruder. Detailed reference data are provided on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. A practical guide to the selection, design and optimization of extrusion processes and equipment Designed to improve production efficiency and product quality Focuses on practical fault analysis and troubleshooting techniques
Download or read book NEHRP Recommended Provisions National Earthquake Hazards Reduction Program for Seismic Regulations for New Buildings and Other Structures Commentary written by United States. Federal Emergency Management Agency and published by . This book was released on 2001 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Atomization and Sprays written by Nasser Ashgriz and published by Springer Science & Business Media. This book was released on 2011-02-18 with total page 922 pages. Available in PDF, EPUB and Kindle. Book excerpt: Atomization and sprays are used in a wide range of industries: mechanical, chemical, aerospace, and civil engineering; material science and metallurgy; food; pharmaceutical, forestry, environmental protection; medicine; agriculture; meteorology and others. Some specific applications are spray combustion in furnaces, gas turbines and rockets, spray drying and cooling, air conditioning, powdered metallurgy, spray painting and coating, inhalation therapy, and many others. The Handbook of Atomization and Sprays will bring together the fundamental and applied material from all fields into one comprehensive source. Subject areas included in the reference are droplets, theoretical models and numerical simulations, phase Doppler particle analysis, applications, devices and more.
Download or read book The Physics of Musical Instruments written by Neville H. Fletcher and published by Springer Science & Business Media. This book was released on 2013-11-09 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the history of musical instruments is nearly as old as civilisation itself, the science of acoustics is quite recent. By understanding the physical basis of how instruments are used to make music, one hopes ultimately to be able to give physical criteria to distinguish a fine instrument from a mediocre one. At that point science may be able to come to the aid of art in improving the design and performance of musical instruments. As yet, many of the subtleties in musical sounds of which instrument makers and musicians are aware remain beyond the reach of modern acoustic measurements. This book describes the results of such acoustical investigations - fascinating intellectual and practical exercises. Addressed to readers with a reasonable grasp of physics who are not put off by a little mathematics, this book discusses most of the traditional instruments currently in use in Western music. A guide for all who have an interest in music and how it is produced, as well as serving as a comprehensive reference for those undertaking research in the field.
Download or read book Moisture Control Guidance for Building Design Construction and Maintenance written by American Society of Heating, Refrigerating and Air-Conditioning Engineers and published by . This book was released on 2016-06-21 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Moisture control is fundamental to the proper functioning of any building. Controlling moisture is important to protect occupants from adverse health effects and to protect the building, its mechanical systems and its contents from physical or chemical damage. Yet, moisture problems are so common in buildings, many people consider them inevitable. Excessive moisture accumulation plagues buildings throughout the United States, from tropical Hawaii to arctic Alaska and from the hot, humid Gulf Coast to the hot, dry Sonoran Desert. Between 1994 and 1998, the U.S. Environmental Protection Agency (EPA) Building Assessment Survey and Evaluation (BASE) study collected information about the indoor air quality of 100 randomly selected public and private office buildings in the 10 U.S. climatic regions.
Download or read book Twentieth Century Building Materials written by Thomas C. Jester and published by Getty Publications. This book was released on 2014-08-01 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the concluding decades of the twentieth century, the historic preservation community increasingly turned its attention to modern buildings, including bungalows from the 1930s, gas stations and diners from the 1940s, and office buildings and architectural homes from the 1950s. Conservation efforts, however, were often hampered by a lack of technical information about the products used in these structures, and to fill this gap Twentieth-Century Building Materials was developed by the U.S. Department of the Interior’s National Park Service and first published in 1995. Now, this invaluable guide is being reissued—with a new preface by the book’s original editor. With more than 250 illustrations, including a full-color photographic essay, the volume remains an indispensable reference on the history and conservation of modern building materials. Thirty-seven essays written by leading experts offer insights into the history, manufacturing processes, and uses of a wide range of materials, including glass block, aluminum, plywood, linoleum, and gypsum board. Readers will also learn about how these materials perform over time and discover valuable conservation and repair techniques. Bibliographies and sources for further research complete the volume. The book is intended for a wide range of conservation professionals including architects, engineers, conservators, and material scientists engaged in the conservation of modern buildings, as well as scholars in related disciplines.
Download or read book From Photon to Neuron written by Philip Nelson and published by Princeton University Press. This book was released on 2017-05-09 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: A richly illustrated undergraduate textbook on the physics and biology of light Students in the physical and life sciences, and in engineering, need to know about the physics and biology of light. Recently, it has become increasingly clear that an understanding of the quantum nature of light is essential, both for the latest imaging technologies and to advance our knowledge of fundamental life processes, such as photosynthesis and human vision. From Photon to Neuron provides undergraduates with an accessible introduction to the physics of light and offers a unified view of a broad range of optical and biological phenomena. Along the way, this richly illustrated textbook builds the necessary background in neuroscience, photochemistry, and other disciplines, with applications to optogenetics, superresolution microscopy, the single-photon response of individual photoreceptor cells, and more. With its integrated approach, From Photon to Neuron can be used as the basis for interdisciplinary courses in physics, biophysics, sensory neuroscience, biophotonics, bioengineering, or nanotechnology. The goal is always for students to gain the fluency needed to derive every result for themselves, so the book includes a wealth of exercises, including many that guide students to create computer-based solutions. Supplementary online materials include real experimental data to use with the exercises. Assumes familiarity with first-year undergraduate physics and the corresponding math Overlaps the goals of the MCAT, which now includes data-based and statistical reasoning Advanced chapters and sections also make the book suitable for graduate courses An Instructor's Guide and illustration package is available to professors
Download or read book Food Packaging Technology written by Richard Coles and published by CRC Press. This book was released on 2003-08-15 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The protection and preservation of a product, the launch of new products or re-launch of existing products, perception of added-value to products or services, and cost reduction in the supply chain are all objectives of food packaging. Taking into consideration the requirements specific to different products, how can one package successfully meet all of these goals? Food Packaging Technology provides a contemporary overview of food processing and packaging technologies. Covering the wide range of issues you face when developing innovative food packaging, the book includes: Food packaging strategy, design, and development Food biodeterioation and methods of preservation Packaged product quality and shelf life Logistical packaging for food marketing systems Packaging materials and processes The battle rages over which type of container should be used for which application. It is therefore necessary to consider which materials, or combination of materials and processes will best serve the market and enhance brand value. Food Packaging Technology gives you the tools to determine which form of packaging will meet your business goals without compromising the safety of your product.
Download or read book Miller s Waves written by William Fickinger and published by Xlibris Corporation. This book was released on 2011-03-23 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dayton Miller, American physicist in the early twentieth century, known for research on medical x-rays and musical sounds, sought evidence for the luminiferous ether, joining the worldwide debate about relativity.
Download or read book Invisible Man written by Ralph Ellison and published by Penguin Books Limited. This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The invisible man is the unnamed narrator of this impassioned novel of black lives in 1940s America. Embittered by a country which treats him as a non-being he retreats to an underground cell.
Download or read book Microfluidics and Nanofluidics Handbook written by Sushanta K. Mitra and published by CRC Press. This book was released on 2011-09-20 with total page 1103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook presents fundamental aspects, fabrication techniques, introductory materials on microbiology and chemistry, measurement techniques, and applications of microfluidics and nanofluidics. The first volume of the handbook focuses on physics and transport phenomena along with life sciences and related applications. It provides newcomers with the fundamental science background required for the study of microfluidics and nanofluidics. In addition, the advanced techniques and concepts described in the text will benefit experienced researchers and professionals.
