Download or read book An Analysis of Primary Creep of Nickel base Superalloy Single Crystals written by P. R. PASLAY and published by . This book was released on 1970 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Primary Creep Behavior of Single Crystal Nickel Base Superalloys PWA 1480 and PWA 1484 written by Brandon Charles Wilson and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Qualitative TEM analysis revealed that PWA 1484 deformed by large dislocation "ribbons" spanning large regions of material. PWA 1480, however, deformed primarily due to matrix dislocations and the creation of interfacial dislocation networks between the [gamma] and [gamma]' phases. PWA 1480+ contained stacking faults as well, though they acted on multiple slip systems generating work hardening and forcing the onset of secondary creep. Xray diffraction and JMatPro calculations were also used to gain insight into the cause of the differences in behaviors.

Download or read book Nickel Base Single Crystals Across Length Scales written by Loeïz Nazé and published by Elsevier. This book was released on 2021-09-28 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nickel Base Single Crystals Across Length Scales is addresses the most advanced knowledge in metallurgy and computational mechanics and how they are applied to superalloys used as bare materials or with a thermal barrier coating system. Joining both aspects, the book helps readers understand the mechanisms driving properties and their evolution from fundamental to application level. These guidelines are helpful for students and researchers who wish to understand issues and solutions, optimize materials, and model them in a cross-check analysis, from the atomistic to component scale. The book is useful for students and engineers as it explores processing, characterization and design. Provides an up-to-date overview on the field of superalloys Covers the relationship between microstructural evolution and mechanical behavior at high temperatures Discusses both basic and advanced modeling and characterization techniques Includes case studies that illustrate the application of techniques presented in the book

Download or read book Creep deformation in nickel base superalloy single crystals written by Tresa Mader Pollock and published by . This book was released on 1989 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Creep and Microstructural Stability of Ruthenium containing Nickel base Single Crystal Superalloys written by Laura Jill Rowland and published by . This book was released on 2005 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Effects of Microstructural Parameters on Creep of Nickel Base Superalloy Single Crystals written by National Aeronaut Administration (Nasa) and published by . This book was released on 2020-08-05 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructure-sensitive creep models have been developed for Ni-base superalloy single crystals. Creep rupture testing was conducted on fourteen single crystal alloys at two applied stress levels at each of two temperatures, 982 and 1093 C. The variation in creep lives among the different alloys could be explained with regression models containing relatively few microstructural parameters. At 982 C, gamma-gamma prime lattice mismatch, gamma prime volume fraction, and initial gamma prime size were statistically significant in explaining the creep rupture lives. At 1093 C, only lattice mismatch and gamma prime volume fraction were significant. These models could explain from 84 to 94 percent of the variation in creep lives, depending on test condition. Longer creep lives were associated with alloys having more negative lattice mismatch, lower gamma prime volume fractions, and finer gamma prime sizes. The gamma-gamma prime lattice mismatch exhibited the strongest influence of all the microstructural parameters at both temperatures. Although a majority of the alloys in this study were stable with respect to topologically close packed (TCP) phases, it appeared that up to approximately 2 vol% TCP phase did not affect the 1093 C creep lives under applied stresses that produced lives of approximately 200 to 300 h. In contrast, TCP phase contents of approximately 2 vol% were detrimental at lower applied stresses where creep lives were longer. A regression model was also developed for the as-heat treated initial gamma prime size; this model showed that gamma prime solvus temperature, gamma-gamma prime lattice mismatch, and bulk Re content were all statistically significant. MacKay, Rebecca A. and Gabb, Timothy P. and Nathal, Michael V. Glenn Research Center NASA/TM-2013-217868, E-18666 WBS 473452.02.03.05.04.01.01 NICKEL ALLOYS; MICROSTRUCTURE; SINGLE CRYSTALS; CREEP PROPERTIES; HEAT RESISTANT ALLOYS; CREEP TESTS; REGRESSION ANALYSIS; CRYSTAL LATTICES; CLOSE PACKED LATTICES; TURBINE BLADES; MATHEMATICAL MODELS; HIGH TEMPERATURE; CONCENTRATION (COMPOSITION); TEMPERATURE DEPENDENCE

Download or read book Superalloys 2020 written by Sammy Tin and published by Springer Nature. This book was released on 2020-08-28 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 14th International Symposium on Superalloys (Superalloys 2020) highlights technologies for lifecycle improvement of superalloys. In addition to the traditional focus areas of alloy development, processing, mechanical behavior, coatings, and environmental effects, this volume includes contributions from academia, supply chain, and product-user members of the superalloy community that highlight technologies that contribute to improving manufacturability, affordability, life prediction, and performance of superalloys.

Download or read book The Superalloys written by Roger C. Reed and published by Cambridge University Press. This book was released on 2008-07-31 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superalloys are unique high-temperature materials used in gas turbine engines, which display excellent resistance to mechanical and chemical degradation. This book introduces the metallurgical principles which have guided their development. Suitable for graduate students and researchers, it includes exercises and additional resources at www.cambridge.org/9780521859042.

Download or read book Creep in Structures written by Michal Zyczkowski and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a tradition to organize IUTAM Symposia "Creep in Structures" every ten years: the first Symposium was organized by N.J. Hoff in Stan ford (1960), the second one by J. Hult in Goteborg (1970), and the third one by A.R.S. Ponter in Leicester (1980). The fourth Symposium in Cracow, September 1990, gathered 123 par ticipants from 21 countries and reflected rapid development of the theory, experimental research and structural applications of creep and viscoplas ticity, including damage and rupture. Indeed, the scope of the Sympo sium was broad, maybe even too broad, but it was kept according to the tradition. Probably the chairman of "Creep in Structures V" in the year 2000 (if organized at all) will be forced to confine the scope substantially. Participation in the Symposium was reserved for invited participants, suggested by members of the Scientific Committee. Total number of sug gestions was very large and the response - unexpectedly high. Apart from several papers rejected, as being out of scope, over 100 papers were accepted for presentation. A somewhat unconventional way of presenta tion was introduced to provide ample time for fruitful and well prepared discussions: besides general lectures (30 minutes each), all the remain ing papers were presented as short introductory lectures (10 minutes) followed by a I-hour poster discussion with the authors and then by a general discussion. Such an approach made it possible to present general ideas orally, and then to discuss all the papers through and through.

Download or read book The Microstructure of Superalloys written by Madeleine Durand-Charre and published by Routledge. This book was released on 2017-11-22 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents all the main aspects of the microstructure of nickel-base superalloys, and includes micrographs chosen from among a large range of commercial and academic alloys, from the as-cast product to in-situ components, worn from in-service use. Including more than 100 illustrations, the text explains all the transformation mechanisms involved in the origination (creation) of microstructures during solidification or heat treatments (crystallization paths, segregation, crystal orientation, precipitation, TCP, coarsening and rafting, etc.). It includes up-to-date information and data such as phase diagrams, crystallographic structures, and relationships with functional properties. Nearly 300 references provide a key to further investigation.

Download or read book Superalloys 2012 written by Eric S. Huron and published by John Wiley & Sons. This book was released on 2012-10-02 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: A superalloy, or high-performance alloy, is an alloy that exhibits excellent mechanical strength at high temperatures. Superalloy development has been driven primarily by the aerospace and power industries. This compilation of papers from the Twelfth International Symposium on Superalloys, held from September 9-13, 2012, offers the most recent technical information on this class of materials.

Download or read book Mechanical Behaviour of Materials VI written by M. Jono and published by Elsevier. This book was released on 2013-10-22 with total page 3510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significant progress in the science and technology of the mechanical behaviour of materials has been made in recent years. The greatest strides forward have occurred in the field of advanced materials with high performance, such as ceramics, composite materials, and intermetallic compounds. The Sixth International Conference on Mechanical Behaviour of Materials (ICM-6), taking place in Kyoto, Japan, 29 July - 2 August 1991 addressed these issues. In commemorating the fortieth anniversary of the Japan Society of Materials Science, organised by the Foundation for Advancement of International Science and supported by the Science Council of Japan, the information provided in these proceedings reflects the international nature of the meeting. It provides a valuable account of recent developments and problems in the field of mechanical behaviour of materials.

Download or read book Fundamentals of Creep in Metals and Alloys written by Michael E. Kassner and published by Elsevier. This book was released on 2004-04-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials * Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures * Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion Understanding the strength of materials at a range of temperatures is critically important to a huge number of researchers and practitioners from a wide range of fields and industry sectors including metallurgists, industrial designers, aerospace R&D personnel, and structural engineers. The most up-to date and comprehensive book in the field, Fundamentals of Creep in Metals and Alloys discusses the fundamentals of time-dependent plasticity or creep plasticity in metals, alloys and metallic compounds. This is the first book of its kind that provides broad coverage of a range of materials not just a sub-group such as metallic compounds, superalloys or crystals. As such it presents the most balanced view of creep for all materials scientists. The theory of all of these phenomena are extensively reviewed and analysed in view of an extensive bibliography that includes the most recent publications in the field. All sections of the book have undergone extensive peer review and therefore the reader can be sure they have access to the most up-to-date research, fully interrogated, from the world’s leading investigators. · Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials· Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures· Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion

Download or read book Factors which Influence Directional Coarsening of Gamma Prime During Creep in Nickel base Superalloy Single Crystals written by Rebecca A. MacKay and published by . This book was released on 1984 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Changes in the morphology of the gamma prime precipitate were examined as a function of time during creep at 982 C in 001 oriented single crystals of a Ni-Al-Mo-Ta superalloy. In this alloy, which has a large negative misfit of -0.80 pct., the gamma prime particles link together during creep to form platelets, or rafts, which are aligned with their broad faces perpendicular to the applied tensile axis. The effects of initial microstructure and alloy composition of raft development and creep properties were investigated. Directional coarsening of gamma prime begins during primary creep and continues well after the onset of second state creep. The thickness of the rafts remains constant up through the onset of tertiary creep a clear indication of the stability of the finely-spaced gamma gamma prime lamellar structure. The thickness of the rafts which formed was equal to the initial gamma prime size which was present prior to testing. The single crystals with the finest gamma prime size exhibited the longest creep lives, because the resultant rafted structure had a larger number of gamma gamma prime interfaces per unit volume of material. Reducing the Mo content by only 0.73 wt. pct. increased the creep life by a factor of three, because the precipitation of a third phase was eliminated."--NASA Technical Reports Server web site.

Download or read book Superalloys written by Matthew J. Donachie and published by ASM International. This book was released on 2002 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers virtually all technical aspects related to the selection, processing, use, and analysis of superalloys. The text of this new second edition has been completely revised and expanded with many new figures and tables added. In developing this new edition, the focus has been on providing comprehensive and practical coverage of superalloys technology. Some highlights include the most complete and up-to-date presentation available on alloy melting. Coverage of alloy selection provides many tips and guidelines that the reader can use in identifying an appropriate alloy for a specific application. The relation of properties and microstructure is covered in more detail than in previous books.

Download or read book Molecular Dynamics Study of Creep Deformation in Nickel based Superalloy written by Sabila Kader Pinky and published by . This book was released on 2019 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present study employs molecular dynamics simulations of Ni-based superalloy to investigate the creep behavior under uniaxial compression test. Dislocation dynamics is analyzed for the nickel-based single crystal superalloy with the presence of void and with varying the distribution of gamma-prime phase The results show that multiple-void systems are more prone to yield than single-void systems and single-void systems are more prone to yield than the system without void. From the simulations, it has been determined that the creep mechanism in Ni/Ni3Al is subject to change on the applied stress depending on the distribution of gamma-prime phases change. Dislocation behavior is also observed in addition to the time evolution of dislocation nucleation and growth to quantify the propensity and mechanism of creep in nickel-based single crystal superalloy. The studies confirmed that dislocation length prior to plastic deformation decreased as the number of voids increased. In addition, the deformation behavior for fine-grained nickel-based polycrystalline superalloy upon grain size variation is also investigated. Our findings show that both the movement mechanisms of the grains and grain boundaries and the relationship between grain size and yield strength are highly affected by the grain size of the materials. All the databases have then been classified to accurately predict the target class vi machine learning using the data mining tool WEKA.

Download or read book High Temperature Strain of Metals and Alloys written by Valim Levitin and published by John Wiley & Sons. This book was released on 2006-05-12 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creep and fatigue are the most prevalent causes of rupture in superalloys, which are important materials for industrial usage, e.g. in engines and turbine blades in aerospace or in energy producing industries. As temperature increases, atom mobility becomes appreciable, affecting a number of metal and alloy properties. It is thus vital to find new characterization methods that allow an understanding of the fundamental physics of creep in these materials as well as in pure metals. Here, the author shows how new in situ X-ray investigations and transmission electron microscope studies lead to novel explanations of high-temperature deformation and creep in pure metals, solid solutions and superalloys. This unique approach is the first to find unequivocal and quantitative expressions for the macroscopic deformation rate by means of three groups of parameters: substructural characteristics, physical material constants and external conditions. Creep strength of the studied up-to-date single crystal superalloys is greatly increased over conventional polycrystalline superalloys. From the contents: - Macroscopic characteristics of strain at high temperatures - Experimental equipment and technique of in situ X-ray investigations - Experimental data and structural parameters in deformed metals - Subboundaries as dislocation sources and obstacles - The physical mechanism of creep and the quantitative structural model - Simulation of the parameters evolution - System of differential equations - High-temperature deformation of industrial superalloys - Single crystals of superalloys - Effect of composition, orientation and temperature on properties - Creep of some refractory metals For materials scientists, solid state physicists, solid state chemists, researchers and practitioners from industry sectors including metallurgical, mechanical, chemical and structural engineers.