EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book An Address on Technical Education and Industrial Drawing  Classic Reprint

Download or read book An Address on Technical Education and Industrial Drawing Classic Reprint written by Walter Smith and published by . This book was released on 2015-08-04 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from An Address on Technical Education and Industrial Drawing Prof. Walter Smith, State director of art education in Massachusetts, then read the following paper: Mr. President, ladies, and gentlemen: The subject upon which I have to address you to-day is that of "Technical education and industrial drawing," a subject which is comprehensive enough to afford interest to the general public, while it is at present the best discussed theme among professional educators. I am aware that this whole matter is neither new nor strange in Washington, for from the Bureau of Education in this city has emanated much of the most valuable information we possess concerning it; and the lecture, recently published, by General Bimey, delivered by him before the Washington Art Club, upon a phase of the subject described as "Industrial and decorative art," is perhaps the fullest and fairest presentation of this matter that has appeared on this side of the Atlantic. Though I hardly expect to present to you much that is new, I may possibly cooperate with you in the diffusion of some new light on an old subject; hoping that thereby additional interest may be awakened, and that in consequence serious consideration may be given to this question, one which has assumed an importance that may be fairly described as national in its character. It may at first sight be considered an overestimate of the matterJif it should be asserted that upon the technical knowledge and skill possessed by a nation depend its safety, its wealth, and indirectly its happiness; yet this is undoubtedly true. It may also be stated that any scheme of education which does not from the first make provision for the gradual acquirement of such technical knowledge and skill, at such times and in such ways as the ages and circumstances of the pupils necessitate, is insufficient and not practical, and in dire need of complete reorganization. Yet that happens to be the case with every scheme of public education administered by city or State authorities in the United States of America to-day. I could have made that statement in many more words, and so have beclouded its meaning that you would not be shocked by it; or I might have quoted some one else who said it, and thus have shielded myself from the responsibility of saying it. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.

Book An Address on Technical Education and Industrial Drawing

Download or read book An Address on Technical Education and Industrial Drawing written by Walter Smith and published by Wentworth Press. This book was released on 2019-03-04 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work. This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.

Book Address On Technical Education and Industrial Drawing

Download or read book Address On Technical Education and Industrial Drawing written by Smith Walter and published by . This book was released on 1901 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Industrial Education  and Drawing as Its Basis

Download or read book Industrial Education and Drawing as Its Basis written by Walter Smith and published by . This book was released on 2015-07-07 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Industrial Education, and Drawing as Its Basis: Address Delivered at the Annual Meeting of the Massachusetts Teachers Association, at Worcester, Dec, 28, 1878 "Two men I honor, and no third. First, the toilworn Craftsman that, with earth-made Implement, laboriously conquers the Earth, and makes her man's. Venerable to me is the hard Hand; crooked, coarse; wherein notwithstanding lies a cunning virtue, indefeasibly royal, as of the Sceptre of this Planet. Venerable too is the rugged face, all weather-tanned, besoiled, with its rude intelligence; for it is the face of a Man living manlike. Oh, but the more venerable for thy rudeness, and even because we must pity as well as love thee! Hardly-entreated Brother! For us was thy back so bent, for us were thy straight limbs and fingers so deformed; thou wert our Conscript, on whom the lot fell, and fighting our battles wert so marred. For in thee, too, lay a god-created Form, but it was not to be unfolded; encrusted must it stand with the thick adhesions and defacements of Labour; and thy body, like thy soul, was not to know freedom. Yet toil on, toil on; thou art in thy duty, be out of it who may; thou toilest for the altogether indispensable, for daily bread. "A second man I honor, and still more highly; Him who is seen toiling for the spiritually indispensable; not daily bread, but the bread of Life. Is not he, too, in his duty; endeavouring towards inward Harmony; revealing this, by act or by word, through all his outward endeavours, be they high or low? Highest of all, when his outward and his inward endeavour are one; when we can call him Artist; not earthly Craftsman only, but inspired Thinker, who with heaven-made Implement conquers Heaven for us! If the poor and humble toil that we have Food, must not the high and glorious toil for him in return, that he may have Light, have Guidance, Freedom, Immortality? These two, in all their degrees, I honor; all else is chaff and dust, which let the wind blow whither it listeth." - Sartor Resartus. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.

Book Report of the Commission on Industrial and Technical Education

Download or read book Report of the Commission on Industrial and Technical Education written by Massachusetts Commission on Education and published by Forgotten Books. This book was released on 2018-02-08 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Report of the Commission on Industrial and Technical Education: Submitted to the Senate and House of Representatives, Massachusetts, in Accordance With Resolve Approved May 24, 1905 Report of the Commission, Address, Public Hearings, The Massachusetts System of Education, Commercial Training, Drawing, Manual Training, Present Status. Of Vocational Training, Other Opportunities for Trade Education, Industrial Education in Europe, Conclusions, Recommendations. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.

Book Technical Education Abroad and at Home

Download or read book Technical Education Abroad and at Home written by James Gordon MacGregor and published by Halifax, N.S. : Association for Promoting University Consolidation, 1882 (Halifax, N.S. : Herald Publishing Company). This book was released on 1882 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book An Introduction to Machine Sketching and Drawing for Industrial and Technical Schools  Classic Reprint

Download or read book An Introduction to Machine Sketching and Drawing for Industrial and Technical Schools Classic Reprint written by and published by Forgotten Books. This book was released on 2018-02-06 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from An Introduction to Machine Sketching and Drawing for Industrial and Technical Schools This book is designed primarily for use in classes for machinists in the night industrial schools of the Province of Ontario. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.

Book Report on Technical Education

Download or read book Report on Technical Education written by Bernard McEvoy and published by . This book was released on 1900 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Technical Education

    Book Details:
  • Author : J. G. Macgregor
  • Publisher :
  • Release : 2015-07-02
  • ISBN : 9781330567432
  • Pages : 46 pages

Download or read book Technical Education written by J. G. Macgregor and published by . This book was released on 2015-07-02 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Technical Education: Abroad and at Home This pamphlet is a reprint of a short series of letters contributed during the past winter to the Morning Herald. I have given them this more permanent form at the request of friends of University Consolidation, and of men who fuel our need of Technical Education. My facts I have drawn from a great variety of sources. I may mention: Rapport sur l'organisation de l'enseignement industriel en Allemagne et en Suisse, published in 1864, by the French Government; Russell's Systematic Technical Education, 1869; Matthew Arnold's Report to the British Government on the Schools of France, Italy, Germany, Switzerland, 1868; Preussens landwirthschaftliche Verwaltung, 1875-7; L'enseignement agricole en France, by H. Johanet, 1882; Technical Education in a Saxon Town, by Felkin, 1881; Agricultural Education, by Prof. W. Johnston, 1881; Liversidge's Report to the Government of New South Wales, on Museums and Scientific and Technical Instruction in Great Britain, and on the Continent of Europe, 1880; the Report of the Quebec Commissioner of Public Works and Agriculture, 1880; Report of tho United States Commissioner of Education, for 1879; Discussions on Technical Education, published by the American Institute of Mining Engineers, 1870; Apprenticeship Schools in France, and other pamphlets, by Prof. S. P. Thompson, Bristol; The Future of Mechanics' Institutions, by Prof. W. E. Ayrton, London; Report to the Japanese Government on the Engineering College, Tokio, 1878; papers in the Transactions of the Highland and Agricultural Society of Scotland, 1875-81, various Circulars of Information issued by the U. S. Bureau of Education; the Education Reports of the Provinces of Canada; and circulars, prospectuses, and calendars of Universities, Colleges, and Technical Schools. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.

Book Hand Book of Industrial Drawing for Teachers in Common Schools  Classic Reprint

Download or read book Hand Book of Industrial Drawing for Teachers in Common Schools Classic Reprint written by Ida A. Tew and published by Forgotten Books. This book was released on 2018-02-02 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Hand-Book of Industrial Drawing for Teachers in Common Schools This book is intended merely as a bird's eye View of the subject of industrial drawing as it is taught in the public schools. It aims to aid the teacher In gaining a little know ledge concerning each department into which the subject is divided. It does not claim to be even an attempt at cover ing the ground in anything like a comprehensive way, but it will give the teacher a starting-point, at least, from which to pursue the subject in all its branches. While doing Institute work the author has been asked numberless times to designate some book which would give an all-round glimpse of drawing, and while there are many books treating of any one of the topics considered in this book, they are treated so comprehensively that the teacher is discouraged at the thought of the mass of material she must read to get what she really wants; and in order to know even a little of each of the topics to be considered she must read as many books as there are divisions of the subject, and it is this that has led the author to give this little book to the public, in the hope that the teacher may find in it the points in drawing which it is necessary 'she should know. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.

Book Education in the Industrial and Fine Arts in the United States  Vol  1

Download or read book Education in the Industrial and Fine Arts in the United States Vol 1 written by Isaac Edwards Clarke and published by Forgotten Books. This book was released on 2017-10-30 with total page 1112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Education in the Industrial and Fine Arts in the United States, Vol. 1: Drawing in Public Schools English influence in America in spite of influx of alien immigration. Historical summary of England's course towards the United States for a century - Great Britain and her Colonies at the Centennial. Mr. Gladstene on probable increase of English-speaking Peoples. Mr. Lowell's address on Democracy at Birmingham England. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.

Book Mechanical Drawing for Trade Schools  Classic Reprint

Download or read book Mechanical Drawing for Trade Schools Classic Reprint written by Charles Carley Leeds and published by Forgotten Books. This book was released on 2018-01-22 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Mechanical Drawing for Trade Schools The purpose of this book is twofold: To prepare High-school students to pass the examinations required for admission to Technical Schools, and to enable the High-school graduate to earn his living as a tracer or detail draftsman. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.

Book Art and Industrial Education  Classic Reprint

Download or read book Art and Industrial Education Classic Reprint written by Isaac Edwards Clarke and published by Forgotten Books. This book was released on 2018-02-14 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Art and Industrial Education Since 1870 the rapidity of the development Of art and industrial education in the United States has been so marked and so effective, the rapid increase in the num ber of special schools and museums of the fine arts SO strik ing, as to make exceedingly difficult a satisfactory survey of this subject within the limits of a monograph. The movement for the general introduction of drawing in the public schools, and of definite endeavors to promote art education, with a purpose to develop and improve the art industries of a people, seemed alike sudden in England and in the United States. In England it was apparently the definite result Of the first world's fair - the exhibition of 1851. In the United States it had its origin in Boston, in 1870, where it was a direct outcome of the English movement. The Centennial exhibition in Philadelphia in 1876, where the work in drawing of the Massachusetts normal art school, and of the public schools in Boston, was shown, made possible the rapid and remarkable development throughout the United States of the two kindred elements in education, namely, industrial art drawing and manual training. This addition of these two new studies to the regular courses of the public schools has been, perhaps, the most notable characteristic educational feature of the past two decades. AS the English were long held to be a people hopelessly inartistic and devoid Of art possibilities, their wonderful development since 1851, in so many lines Of artistic manu factures, challenges investigation, especially by a people long similarly accused as being innately inartistic, and for a long perio, d, it must be admitted, apparently deservedly SO accused. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.

Book Industrial Drawing in Public Schools  Classic Reprint

Download or read book Industrial Drawing in Public Schools Classic Reprint written by Walter Smith and published by Forgotten Books. This book was released on 2018-02-20 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Industrial Drawing in Public Schools The study of drawing is a very broad one in its applications to practical life; and no course of instruction can be satisfactory that does not embrace its scientific and practical features as a basis. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.

Book Industrial Art Education

Download or read book Industrial Art Education written by Walter Smith and published by Forgotten Books. This book was released on 2017-05-06 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Industrial Art Education: A Lecture Delivered in Philadelphia, April 23, 1875 We respectfully invite your attention to the. Accompanying pamphlets relating to Industrial Drawing, a subject which is now receiving much atten tion at the hands of teachers and school officers. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.

Book Principles of Engineering Drawing for Technical Students  Classic Reprint

Download or read book Principles of Engineering Drawing for Technical Students Classic Reprint written by Charles Carley Leeds and published by Forgotten Books. This book was released on 2018-02-04 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Principles of Engineering Drawing for Technical Students The subject matter of this text has been carefully prepared and arranged with a view to meeting the needs of Freshman students in Engineering Schools and Colleges. It contains, in addition, ample material for the requirements of more advanced men who are interested in Engineering Drawing. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.

Book A Course of Study in Industrial Drawing

Download or read book A Course of Study in Industrial Drawing written by Paul A. Garin and published by Forgotten Books. This book was released on 2018-11-21 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from A Course of Study in Industrial Drawing: An Elementary Manual for the Self-Instruction of Teachers and Pupils of Public and Private Schools In the practice of my profession as a teacher of industrial drawing, it has been my custom for many years, to select from all sources What I thought most appropriate for my pupils. As a result, I found myself engaged in a course so different from any already published, that I was compelled to write this book for use in the schools under my supervision. Although the materials selected are old, the manner of hand ling them Will be found to be quite my own. Every example has been thoroughly tested in the school room and proven satisfactory, not only When in the hands of the special instructor, but also When used by the regular teachers. This is really a revised and enlarged edition of my work upon the same subject published last year. Several years of practical draughtsmanship in architectural and engineering offices, and a long and varied experience as a teacher in all the grades and classes of the public schools, have shown me the need of a drawing manual to meet the in creasing demands for a practical education, so large a part of Which education lies in the knowledge of industrial drawing, a study so necessary and yet so little understood by my fellow teachers and the public generally. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.