Download or read book Amine Unit Corrosion in Refineries written by J Harston and published by Elsevier. This book was released on 2007-04-18 with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt: The corrosion of carbon steels in amine units used for gas treatment in refining operations is a major problem for the petrochemical industry. Maximising amine unit reliability, together with improving throughput, circulation and treatment capacity, requires more effective ways of measuring and predicting corrosion rates. However, there has been a lack of data on corrosion. This valuable report helps to remedy this lack of information by summarising findings from over 30 plants. It covers such amine types as methyl diethanolamine (MDEA), diethanolamine (DEA), monoethanolamine (MEA) and di-isopropanolamine (DIPA), and makes recommendations on materials and process parameters to maximise amine unit efficiency and reliability. Covers such amine types as Methyl Diethanolamine (MDEA) and Di-isopropanolamine Makes recommendations on materials and process parameters to maximise amine unit efficiency and reliability

Download or read book Corrosion in Amine Treating Units written by Johan van Roij and published by Woodhead Publishing. This book was released on 2021-10-27 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion in Amine Treating Units, Second Edition presents a fully updated resource with a broadened focus that includes corrosion in not only refining operations, but also in oil and gas production. New sections have been added on inhibition, corrosion modeling and metallic coatings. More detailed descriptions of the degradation mechanisms and Integrity Operating Windows (IOW) are now included, as is more in-depth information on guidelines for what sections and locations are most vulnerable to corrosion and how to control corrosion in amine units e.g., using corrosion Loop descriptions and providing indicative integrity operating windows for operation to achieve a suitable life expectance. Provides new insights on the degradation mechanisms occurring in amine treating units and the locations within the unit where they occur Discusses how to mitigate and control corrosion in amine units Provides guidance for setting up corrosion control documents and inspection and maintenance plans for amine treating units

Download or read book Corrosion in Refineries written by J Harston and published by Elsevier. This book was released on 2014-01-23 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion in ageing refinery plant presents a serious safety hazard. This important book summarises key research into corrosion processes in refinery equipment, how it can be measured and controlled. The book reviews factors affecting corrosion such as carburisation and metal dusting as well as corrosion in steel and other materials used in refinery technology. It considers corrosion in a range of refinery equipment such as storage tanks, HF alkylation units, sour water strippers and insulated units. Other chapters discuss ways of testing for corrosion and cracking in refineries together with integrity and life cycle assessment techniques. There is also coverage of ways of trouble-shooting corrosion problems and preventative measures such as coating systems.With its distinguished editor and team of contributors, Corrosion in refineries is a valuable reference for all those concerned with building and maintaining refineries in the petrochemical industry. Summarises key research into corrosion processes in refinery equipment Discusses ways of testing for corrosion and cracking in refineries

Download or read book Corrosion Problems and Solutions in Oil Refining and Petrochemical Industry written by Alec Groysman and published by Springer. This book was released on 2016-10-24 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses corrosion problems and their solutions at facilities in the oil refining and petrochemical industry, including cooling water and boiler feed water units. Further, it describes and analyzes corrosion control actions, corrosion monitoring, and corrosion management. Corrosion problems are a perennial issue in the oil refining and petrochemical industry, as they lead to a deterioration of the functional properties of metallic equipment and harm the environment – both of which need to be protected for the sake of current and future generations. Accordingly, this book examines and analyzes typical and atypical corrosion failure cases and their prevention at refineries and petrochemical facilities, including problems with: pipelines, tanks, furnaces, distillation columns, absorbers, heat exchangers, and pumps. In addition, it describes naphthenic acid corrosion, stress corrosion cracking, hydrogen damages, sulfidic corrosion, microbiologically induced corrosion, erosion-corrosion, and corrosion fatigue occurring at refinery units. At last, fouling, corrosion and cleaning are discussed in this book.

Download or read book The Role of Anion Contaminants on Corrosion in Refinery Amine Units written by L. E. Hakka and published by . This book was released on 1995 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Corrosion in the Petrochemical Industry Second Edition written by and published by ASM International. This book was released on 2015-12-01 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 1994, this second edition of Corrosion in the Petrochemical Industry collects peer-reviewed articles written by experts in the field of corrosion that were specifically chosen for this book because of their relevance to the petrochemical industry. This edition expands coverage of the different forms of corrosion, including the effects of metallurgical variables on the corrosion of several alloys. It discusses protection methods, including discussion of corrosion inhibitors and corrosion resistance of aluminum, magnesium, stainless steels, and nickels. It also includes a section devoted specifically to petroleum and petrochemical industry related issues.

Download or read book Corrosion Inhibitors in the Oil and Gas Industry written by Viswanathan S. Saji and published by John Wiley & Sons. This book was released on 2020-06-02 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive coverage of corrosion inhibitors in the oil and gas industries Considering the high importance of corrosion inhibitor development for the oil and gas sectors, this book provides a thorough overview of the most recent advancements in this field. It systematically addresses corrosion inhibitors for various applications in the oil and gas value chain, as well as the fundamentals of corrosion inhibition and interference of inhibitors with co-additives. Corrosion Inhibitors in the Oil and Gas Industries is presented in three parts. The first part on Fundamentals and Approaches focuses on principles and processes in the oil and gas industry, the types of corrosion encountered and their control methods, environmental factors affecting inhibition, material selection strategies, and economic aspects of corrosion. The second part on Choice of Inhibitors examines corrosion inhibitors for acidizing processes, inhibitors for sweet and sour corrosion, inhibitors in refinery operations, high-temperature corrosion inhibitors, inhibitors for challenging corrosive environments, inhibitors for microbiologically influenced corrosion, polymeric inhibitors, vapor phase inhibitors, and smart controlled release inhibitor systems. The last part on Interaction with Co-additives looks at industrial co-additives and their interference with corrosion inhibitors such as antiscalants, hydrate inhibitors, and sulfide scavengers. -Presents a well-structured and systematic overview of the fundamentals and factors affecting corrosion -Acts as a handy reference tool for scientists and engineers working with corrosion inhibitors for the oil and gas industries -Collectively presents all the information available on the development and application of corrosion inhibitors for the oil and gas industries -Offers a unique and specific focus on the oil and gas industries Corrosion Inhibitors in the Oil and Gas Industries is an excellent resource for scientists in industry as well as in academia working in the field of corrosion protection for the oil and gas sectors, and will appeal to materials scientists, electrochemists, chemists, and chemical engineers.

Download or read book Gas Purification written by Arthur L. Kohl and published by Butterworth-Heinemann. This book was released on 1985 with total page 918 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Oil and Gas Corrosion Prevention written by James G. Speight and published by Gulf Professional Publishing. This book was released on 2014-03-13 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: According to NACE (National Association of Corrosion Engineers), the total annual cost of corrosion in petroleum refining takes up $3.7 billion in the US alone. Corrosion control is always a challenge for the downstream industry, but as the quality of feedstock is declining due to refineries accepting more of the heavy and shale gas and oil resources that are more readily available today, refinery managers, petroleum and natural gas engineers are unprepared for the new set of corrosion problems that are showing up in their equipment and processing units. Oil and Gas Corrosion Prevention: From Surface Facilities to Refineries quickly gets the engineer and manager up to speed on the latest types of corrosion common for these lower grade crude oils and gases as well as the best prevention methods for all of the major sections of the refinery, especially desalting and sulfur recovery units, which are the most common problem areas for unconventional feedstocks. Also covering the unique midstream sections, or point of entry to the refinery, as well as the major critical refinery equipment, Oil and Gas Corrosion Prevention: From Surface Facilities to Refineries offers the perfect quick cross-reference for the oil and gas community. Gets engineers and managers up to speed on the latest types of corrosion common for lower grade crude oils and gases Provides the best prevention methods for all of the major sections of the refinery, especially desalting and sulfur recovery units Covers additional topics such as unique midstream sections, or point of entry to the refinery, as well as major critical refinery equipment

Download or read book Corrosion and Materials Selection written by Alireza Bahadori and published by John Wiley & Sons. This book was released on 2014-08-11 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: The petroleum and chemical industries contain a wide variety of corrosive environments, many of which are unique to these industries. Oil and gas production operations consume a tremendous amount of iron and steel pipe, tubing, pumps, valves, and sucker rods. Metallic corrosion is costly. However, the cost of corrosion is not just financial. Beyond the huge direct outlay of funds to repair or replace corroded structures are the indirect costs – natural resources, potential hazards, and lost opportunity. Wasting natural resources is a direct contradiction to the growing need for sustainable development. By selecting the correct material and applying proper corrosion protection methods, these costs can be reduced, or even eliminated. This book provides a minimum design requirement for consideration when designing systems in order to prevent or control corrosion damage safely and economically, and addresses: • Corrosion problems in petroleum and chemical industries • Requirements for corrosion control • Chemical control of corrosive environments • Corrosion inhibitors in refineries and petrochemical plants • Materials selection and service life of materials • Surface preparation, protection and maintainability • Corrosion monitoring - plant inspection techniques and laboratory corrosion testing techniques Intended for engineers and industry personnel working in the petroleum and chemical industries, this book is also a valuable resource for research and development teams, safety engineers, corrosion specialists and researchers in chemical engineering, engineering and materials science.

Download or read book Predictive Corrosion and Failure Control in Process Operations written by P. F. Timmins and published by ASM International. This book was released on 1996-01-01 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intended for inspectors and engineers in the refining, petrochemical, and process industries. Includes material such as methods for inspecting process operations equipment, a diagrammatic cross-reference between processes and corrosion, a philosophy on metals selection for the construction of equipm

Download or read book Corrosion Under Insulation CUI Guidelines written by and published by Elsevier. This book was released on 2014-01-23 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion under insulation (CUI) refers to the external corrosion of piping and vessels that occurs underneath externally clad/jacketed insulation as a result of the penetration of water. By its very nature CUI tends to remain undetected until the insulation and cladding/jacketing is removed to allow inspection or when leaks occur. CUI is a common problem shared by the refining, petrochemical, power, industrial, onshore and offshore industries. The European Federation of Corrosion (EFC) Working Parties WP13 and WP15 have worked to provide guidelines on managing CUI together with a number of major European refining, petrochemical and offshore companies including BP, Chevron-Texaco, Conoco-Phillips, ENI, Exxon-Mobil, IFP, MOL, Scanraff, Statoil, Shell, Total and Borealis. The guidelines within this document are intended for use on all plants and installations that contain insulated vessels, piping and equipment. The guidelines cover a risk-based inspection methodology for CUI, inspection techniques (including non-destructive evaluation methods) and recommended best practice for mitigating CUI, including design of plant and equipment, coatings and the use of thermal spray techniques, types of insulation, cladding/jacketing materials and protection guards. The guidelines also include case studies. Guidelines cover inspection methodology for CUI, inspection techniques, including non-destructive evaluation methods and recommended best practice Case studies are included illustrating key points in the book

Download or read book Corrosion of Metallic Heritage Artefacts written by P Dillmann and published by Elsevier. This book was released on 2014-01-23 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding long term corrosion processes is critical in many areas, including archaeology and conservation. This important book reviews key themes such as the processes underlying corrosion over long periods, how corrosion rates can be measured and materials conserved.After an overview of the study and conservation of metal archaeological artefacts, a group of chapters reviews long term corrosion in metals such as steel, iron and bronze. Other chapters review the impact of environmental factors on corrosion rates. The book also considers instrumental techniques for measuring corrosion such as electrochemistry and scanning electron microscopy, as well as ways of modelling corrosion processes. There is also coverage of the effectiveness of corrosion inhibitors.With its distinguished editors and contributors, Corrosion of metallic heritage artefacts improves our understanding of long term corrosion and its effects. It provides a valuable reference for those involved in archaeology and conservation, as well as those dealing with the long term storage of nuclear and other waste. Reviews long term corrosion in metals such as steel, iron and bronze Considers instumental techniques such as electrochemistry for measuring corrosion

Download or read book Corrosion by Carbon and Nitrogen written by H Grabke and published by Elsevier. This book was released on 2014-01-23 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal dusting is a form of corrosion involving the disintegration of metals and alloys into a dust of graphite and metal particles when exposed to a carburizing atmosphere. This important book reviews the factors affecting metal dusting and how it can be prevented in sectors such as the chemical and petrochemical industries and in the direct reduction of iron ores. It also considers the related corrosion phenomena of carburization and nitridation. After an introductory chapter setting out the key processes involved in metal dusting, the book reviews how this corrosion process affects a range of metals such as iron and steel, as well as nickel-based and chromium-based high-temperature alloys. There are chapters on the effects of particular gas mixtures on the corrosion process and on the use of coatings to prevent metal dusting. Processes involved in carburization and nitridation are also described and discussed. With its distinguished editors and team of contributors, Corrosion by carbon and nitrogen is a valuable reference for all those concerned with understanding and preventing these corrosion processes in various industries. Reviews this corrosion process and how it affects the petrochemical and other industries Discusses the effect of particular gas mixtures on the corrosion process

Download or read book Corrosion Behaviour and Protection of Copper and Aluminium Alloys in Seawater written by D Féron and published by Elsevier. This book was released on 2007-05-17 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Copper and aluminium alloys are widely used in marine engineering in areas such as pipelines, storage tanks, ships’ hulls and cladding for offshore structures. This important book reviews key factors affecting the corrosion and service life of these materials in the marine environment. The book is divided into five parts, with part one reviewing key aspects of the corrosion behaviour of both these alloys. Part two discusses the use of copper and copper-nickel alloys in seawater, whilst Parts 3 and 4 cover aluminium bronzes and alloys. The final section of the book covers the use of aluminium-based materials as anodes for the cathodic protection of marine structures. Corrosion behaviour and protection of copper and aluminium alloys in seawater is an important reference for marine engineers concerned with the corrosion and service life of these materials. Reviews key factors affecting the corrosion and service life of copper and aluminium alloys Discusses the use of the alloys in seawater

Download or read book Hydrocarbon Processing and Refining written by Ashis Nag and published by CRC Press. This book was released on 2022-12-12 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers petroleum refining and gas purification processes, including refinery configurations comprising of relevant units with special emphasis on processing of heavy crudes with high acid number. It includes a short review of distillation principles, distillation column auxiliaries, critical column pressure control strategies, critical issues of crude and vacuum distillation units particularly for heavy crude processing. Different corrosion mechanisms and their prevention with regards to heavy high TAN crude processing are also included. Fundamentals are explained with support of steady-state simulation and presented with simulation flowsheets and outputs, supported by examples of calculations and troubleshooting case studies. Features: • Deals with principles and practices in the hydrocarbon industry and petroleum refinery with emphasis on heavy crude processing • Focuses on operation and practices of the major process units with simulation examples and aimed at the professional engineer • Covers acid gas treatment in view of increased emphasis on carbon capture and storage, and introduction of residue gasification processes • Elucidates methodologies for safety relief load computation for distillation columns • Explains real-life problems in reboilers, column internals, column pressure controls and corrosion in crude, and vacuum distillation and secondary units with several case studies This book is aimed at professionals in petroleum engineering and graduate students in chemical engineering.

Download or read book Corrosion in Amine Gas Treating Solutions written by F. Lang and published by . This book was released on 1958 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: