Download or read book Solid Propellant Chemistry Combustion and Motor Interior Ballistics 1999 written by Vigor Yang and published by AIAA. This book was released on 2000 with total page 1038 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combustion Measurements written by Norman Chigier and published by CRC Press. This book was released on 2024-11-01 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book begins with an introduction to the general problems of making measurements in high temperature and a presentation of chemically reacting flow systems. It describes each instrument with the various diagnostic techniques and discusses measurements that have been made in furnaces, flames, and rocket engines. The detailed measurement techniques described in this book cover a wide spectrum of applications in combustion systems, including gas turbine, rocket measurement techniques that were developed in laboratories. Information obtained on detailed temperature, velocity, particle size, and gas concentration distribution is leading to improve understanding of the chemical combustion process and to design imporvements in combustors.
Download or read book Fundamentals of Solid Propellant Combustion written by K. K. Kuo and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Estimated Viscosities and Thermal Conductivities of Gases at High Temperatures written by Roger A. Svehla and published by . This book was released on 1963 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Viscosities and thermal conductivities, suitable for heat-transfer calculations, were estimated for about 200 gases in the ground state from 100° to 5000° K and 1-atm pressure. Free radicals were included, but excited states and ions were not. Calculations for the transport coefficients were based upon the Lennard-Jones (12-6) potential for all gases. Intermolecular force constants for this potential were obtained from experimental viscosity data or were estimated when data were not available. The same set of constants was used to calculate both viscosity and conductivity. An Eucken-type correction for exchange between internal and translational energies was made for thermal conductivities of polyatomic gases.
Download or read book Solid Propellant Rocket Research written by Martin Summerfield and published by Elsevier. This book was released on 2013-11-11 with total page 713 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid Propellant Rocket Research
Download or read book Chemical Rocket Propulsion written by Luigi T. De Luca and published by Springer. This book was released on 2016-08-19 with total page 1069 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed and expanded from the work presented at the New Energetic Materials and Propulsion Techniques for Space Exploration workshop in June 2014, this book contains new scientific results, up-to-date reviews, and inspiring perspectives in a number of areas related to the energetic aspects of chemical rocket propulsion. This collection covers the entire life of energetic materials from their conceptual formulation to practical manufacturing; it includes coverage of theoretical and experimental ballistics, performance properties, as well as laboratory-scale and full system-scale, handling, hazards, environment, ageing, and disposal. Chemical Rocket Propulsion is a unique work, where a selection of accomplished experts from the pioneering era of space propulsion and current technologists from the most advanced international laboratories discuss the future of chemical rocket propulsion for access to, and exploration of, space. It will be of interest to both postgraduate and final-year undergraduate students in aerospace engineering, and practicing aeronautical engineers and designers, especially those with an interest in propulsion, as well as researchers in energetic materials.
Download or read book Propellants and Explosives written by Naminosuke Kubota and published by John Wiley & Sons. This book was released on 2015-04-23 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition of the classic on the thermochemical aspects of the combustion of propellants and explosives is completely revised and updated and now includes a section on green propellants and offers an up-to-date view of the thermochemical aspects of combustion and corresponding applications. Clearly structured, the first half of the book presents an introduction to pyrodynamics, describing fundamental aspects of the combustion of energetic materials, while the second part highlights applications of energetic materials, such as propellants, explosives and pyrolants, with a focus on the phenomena occurring in rocket motors. Finally, an appendix gives a brief overview of the fundamentals of aerodynamics and heat transfer, which is a prerequisite for the study of pyrodynamics. A detailed reference for readers interested in rocketry or explosives technology.
Download or read book Solid Rocket Motor Performance Analysis and Prediction written by William H. Miller and published by . This book was released on 1971 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combustion of Energetic Materials written by Kenneth K. Kuo and published by Begell House Publishers. This book was released on 2002 with total page 1114 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited book contains state-of-the-art information associated with energetic material combustion. There are twelve topical areas, including: Reaction Kinetics of Energetic Materials (Solid, Liquid, and Gel Propellants); Recycling of Energetic Materials; Combustion Performance of Hybrid and Solid Rocket Motors; Ignition and Combustion of Energetic Materials; Energetic Material Defects and Rocket Engine Flowfields; Metal Combustion; Pyrolysis and Combustion Processes of New Ingredients and Applications; Theoretical Modeling and Numerical Simulation of Combustion Processes of Energetic Materials; Combustion Diagnostic Techniques; Propellant and Rocket Motor Stability; Commercial Applications of Energetic Materials (Airbags, Gas Generators, etc.); and Thermal Insulation and Ablation Processes.
Download or read book Innovative Design and Development Practices in Aerospace and Automotive Engineering written by Ram P. Bajpai and published by Springer. This book was released on 2016-09-17 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the best articles presented by researchers, academicians and industrial experts in the International Conference on “Innovative Design and Development Practices in Aerospace and Automotive Engineering (I-DAD 2016)”. The book discusses new concept designs, analysis and manufacturing technologies, where more swing is for improved performance through specific and/or multifunctional linguistic design aspects to downsize the system, improve weight to strength ratio, fuel efficiency, better operational capability at room and elevated temperatures, reduced wear and tear, NVH aspects while balancing the challenges of beyond Euro IV/Barat Stage IV emission norms, Greenhouse effects and recyclable materials. The innovative methods discussed in the book will serve as a reference material for educational and research organizations, as well as industry, to take up challenging projects of mutual interest.
Download or read book Innovative Energetic Materials Properties Combustion Performance and Application written by WeiQiang Pang and published by Springer Nature. This book was released on 2020-07-04 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the combustion performance and application of innovative energetic materials for solid and hybrid space rocket propulsion. It provides a comprehensive overview of advanced technologies in the field of innovative energetic materials and combustion performance, introduces methods of modeling and diagnosing the aggregation/agglomeration of active energetic metal materials in solid propellants, and investigates the potential applications of innovative energetic materials in solid and hybrid propulsion. In addition, it also provides step-by-step solutions for sample problems to help readers gain a good understanding of combustion performance and potential applications of innovative energetic materials in space propulsion. This book serves as an excellent resource for researchers and engineers in the field of propellants, explosives, and pyrotechnics.
Download or read book Propellants Manufacture Hazards and Testing written by Carl Boyars and published by . This book was released on 1969 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applications of Calorimetry in a Wide Context written by Amal Ali Elkordy and published by BoD – Books on Demand. This book was released on 2013-01-23 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Calorimetry, as a technique for thermal analysis, has a wide range of applications which are not only limited to studying the thermal characterisation (e.g. melting temperature, denaturation temperature and enthalpy change) of small and large drug molecules, but are also extended to characterisation of fuel, metals and oils. Differential Scanning Calorimetry is used to study the thermal behaviours of drug molecules and excipients by measuring the differential heat flow needed to maintain the temperature difference between the sample and reference cells equal to zero upon heating at a controlled programmed rate. Microcalorimetry is used to study the thermal transition and folding of biological macromolecules in dilute solutions. Microcalorimetry is applied in formulation and stabilisation of therapeutic proteins. This book presents research from all over the world on the applications of calorimetry on both solid and liquid states of materials.
Download or read book Fundamentals of Rocket Propulsion written by DP Mishra and published by CRC Press. This book was released on 2017-07-20 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book follows a unified approach to present the basic principles of rocket propulsion in concise and lucid form. This textbook comprises of ten chapters ranging from brief introduction and elements of rocket propulsion, aerothermodynamics to solid, liquid and hybrid propellant rocket engines with chapter on electrical propulsion. Worked out examples are also provided at the end of chapter for understanding uncertainty analysis. This book is designed and developed as an introductory text on the fundamental aspects of rocket propulsion for both undergraduate and graduate students. It is also aimed towards practicing engineers in the field of space engineering. This comprehensive guide also provides adequate problems for audience to understand intricate aspects of rocket propulsion enabling them to design and develop rocket engines for peaceful purposes.
Download or read book Metal Nanopowders written by Alexander A. Gromov and published by John Wiley & Sons. This book was released on 2014-05-19 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written with both postgraduate students and researchers in academia and industry in mind, this reference covers the chemistry behind metal nanopowders, including production, characterization, oxidation and combustion. The contributions from renowned international scientists working in the field detail applications in technologies, scale-up processes and safety aspects surrounding their handling and storage.
Download or read book Energetic Materials written by Ulrich Teipel and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: Incorporation of particular components with specialized properties allows one to tailor the end product's properties. For instance, the sensitivity, burning behavior, thermal or mechanical properties or stability of energetic materials can be affected and even controllably varied through incorporation of such ingredients. This book examines particle technologies as applied to energetic materials such as propellants and explosives, thus filling a void in the literature on this subject. Following an introduction covering general features of energetic materials, the first section of this book describes methods of manufacturing particulate energetic materials, including size reduction, crystallization, atomization, particle formation using supercritical fluids and microencapsulation, agglomeration phenomena, special considerations in mixing explosive particles and the production of nanoparticles. The second section discusses the characterization of particulate materials. Techniques and methods such as particle size analysis, morphology elucidation and the determination of chemical and thermal properties are presented. The wettability of powders and rheological behavior of suspensions and solids are also considered. Furthermore, methods of determining the performance of particular energetic materials are described. Each chapter deals with fundamentals and application possibilities of the various methods presented, with particular emphasis on issues applicable to particulate energetic materials. The book is thus equally relevant for chemists, physicists, material scientists, chemical and mechanical engineers and anyone interested or engaged in particle processing and characterization technologies.
Download or read book Introduction to Modeling and Control of Internal Combustion Engine Systems written by Lino Guzzella and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Internal combustion engines still have a potential for substantial improvements, particularly with regard to fuel efficiency and environmental compatibility. These goals can be achieved with help of control systems. Modeling and Control of Internal Combustion Engines (ICE) addresses these issues by offering an introduction to cost-effective model-based control system design for ICE. The primary emphasis is put on the ICE and its auxiliary devices. Mathematical models for these processes are developed in the text and selected feedforward and feedback control problems are discussed. The appendix contains a summary of the most important controller analysis and design methods, and a case study that analyzes a simplified idle-speed control problem. The book is written for students interested in the design of classical and novel ICE control systems.
