Download or read book Albert Kahn s Industrial Architecture written by Thorsten Bürklin and published by Birkhaüser. This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Albert Kahn is probably the most important industrial architect of the 20th century. With his factory for the Ford T models, designed for mass production, he found himself at the beginning of modern industrial architecture. His industrial buildings inspired the architects of European Modernism. They were the examples by which the structural rationality of Kahn's industrial developments became the guiding principle for the New Building movement up until today. The unrivalled monograph with its numerous photographs, plan layouts, site plans, and virtual 3D models comprehensively documents the buildings of Albert Kahn, which he was able to construct in a very short time due to his system-based working method - in the USA but also in the Soviet Union, Brazil, Sweden, France, China, Japan, and Australia.
Download or read book The Legacy of Albert Kahn written by Albert Kahn and published by Wayne State University Press. This book was released on 1987 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the Back Cover: An invaluable handbook tracing the creative genius of Albert Kahn, one of America's most distinguished architects, The Legacy of Albert Kahn presents a chronology of designs in the areas of commercial, civic, institutional, and domestic architecture. Over 280 photographs, drawings, and floor plans illustrate the highly readable text.
Download or read book Designing for Industry written by Grant Hildebrand and published by Cambridge, Mass : The MIT Press. This book was released on 1974 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Building the Modern World written by Michael H. Hodges and published by Painted Turtle. This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A photographically rich biography of protean architect Albert Kahn.
Download or read book Industrial Architecture of Albert Kahn Inc written by George Nelson and published by . This book was released on 1939 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Albert Kahn Associates written by Albert Kahn Associates and published by L'Arcaedizioni. This book was released on 2000 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Architect Albert Kahn was one of the early inventors of the automobile factory in the early 1900s. Today, Albert Kahn Associates, Inc. (AKA) continues his legacy by leading the industry in factory architecture and in many other fields, from big university complexes to the most updated research centers -- as a fully integrated, multi-disciplinary professional practice, with wide-ranging diversity, flexibility and responsiveness to customer needs.
Download or read book The Art of Collaboration Innovation written by Albert Kahn Associates and published by . This book was released on 2020-10 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: For 125 years, Albert Kahn Associates, Inc. has committed to designing and engineering innovative facilities that surpass the needs of our clients. Guided by the legacy of our founder Albert Kahn and a passion for architecture and engineering, Kahn commits to putting our clients first and delivering a remarkable product.Having designed over 45,000 projects around the world, Kahn's expertise starts with architecture, engineering, interior design, program management, and master planning, and spans through commissioning, business and management needs, strategic facilities planning, value and sustainability analysis.
Download or read book Vertical Urban Factory written by Nina Rappaport and published by Actar. This book was released on 2019-12-30 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised edition focuses on the spaces of production in cities--both the modernist period and today--and the technologies that have contributed to shifts in factory architecture, manufacturing, and urban design. Vertical Urban Factory tracks the evolution of the vertical urban factory from the first industrial revolution to the present and provides an analysis of the political, social, and economic factors that have shaped today's global industrial landscape. Ultimately, it provokes new concepts for the futureof urban manufacturing, and the necessity of creating new paradigms for sustainable, self-sufficient urban industry. Illustrated with historic and contemporary photographs, manufacturing process diagrams, and infographics by MGMT Design.
Download or read book Albert Kahn written by Albert Kahn and published by . This book was released on 2001 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Michigan Modern written by Amy L. Arnold and published by Gibbs Smith. This book was released on 2016-10-04 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Michigan Modern: Design That Shaped America is an impressive collection of important essays touching on all aspects of Michigan’s architecture and design heritage. The Great Lakes State has always been known for its contributions to twentieth-century manufacturing, but it’s only beginning to receive wide attention for its contributions to Modern design and architecture. Brian D. Conway, Michigan’s State Historic Preservation Officer, and Amy L. Arnold, project manager for Michigan Modern, have curated nearly thirty essays and interviews from a number of prominent architects, academics, architectural historians, journalists, and designers, including historian Alan Hess, designers Mira Nakashima, Ruth Adler Schnee, and Todd Oldham, and architect Gunnar Birkerts, describing Michigan’s contributions to Modern design in architecture, automobiles, furniture and education.
Download or read book The Works written by Betsy H. Bradley and published by Oxford University Press, USA. This book was released on 1999 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: While tracing the important developments in industrial architecture over a one-hundred-year period, she demonstrates that as the United States became an industrialized nation, the goals pursued in industrial architecture remained straightforward and constant even as the means to achieve them changed.
Download or read book Building a new New World written by Jean-Louis Cohen and published by Yale University Press. This book was released on 2021-01-12 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential exploration of how Russian ideas about the United States shaped architecture and urban design from the czarist era to the fall of the U.S.S.R. Idealized representations of America, as both an aspiration and a menace, played an important role in shaping Russian architecture and urban design from the American Revolution until the fall of the Soviet Union. Jean-Louis Cohen traces the powerful concept of “Amerikanizm” and its impact on Russia’s built environment from early czarist interest in Revolutionary America, through the spectacular World’s Fairs of the 19th century, to department stores, skyscrapers, and factories built in Russia using American methods during the 20th century. Visions of America also captivated the Russian avant-garde, from El Lissitzky to Moisei Ginzburg, and Cohen explores the ongoing artistic dialogue maintained between the two countries at the mid-century and in the late Soviet era, following a period of strategic competition. This first major study of Amerikanizm in the architecture of Russia makes a timely contribution to our understanding of modern architecture and its broader geopolitics.
Download or read book AIA Detroit written by Eric J. Hill and published by Wayne State University Press. This book was released on 2003 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: A beautifully designed resource that takes readers on a tour of greater Detroit's many architectural wonders and special landmarks.
Download or read book American City written by Robert Sharoff and published by Wayne State University Press. This book was released on 2005 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: "In the 1910s and 1920s there was more steel going up in Detroit than anywhere outside of New York and Chicago. The result was the country's first high-tech metropolis, a city of lavish monuments and glittering skyscrapers." "The list of major architects who designed buildings for Detroit includes Frank Lloyd Wright, Mies van der Rohe, Stanford White, Daniel Burnham, Cass Gilbert, Albert Kahn, Minoru Yamasaki, Philip Johnson, and numerous others." "Detroit's public buildings - its museums, libraries, schools, and monuments - are second to none in terms of their overall scale, materials, and detailing. Hotels, stores, theaters, and other commercial venues display a breezy cosmopolitanism consistent with the city's position as both a technology hub and a crossroads of immigration." "Overwhelmed by the sheer beauty of the buildings they encountered on a 2003 visit to downtown Detroit, writer Robert Sharoff and photographer William Zbaren were inspired to create American City: Detroit Architecture, 1845-2005, the first new large-format book on the city's architecture in more than thirty years." "The fact that many structures are either endangered or marginally in use makes the book all the more compelling. In 2005, the National Trust for Historic Preservation placed "the historic buildings of downtown Detroit" on the list of the country's most endangered landmarks." "The book also includes examples of interesting new architecture as well as numerous historic buildings from the 1920s and earlier that have been maintained or in some cases painstakingly restored."--BOOK JACKET.
Download or read book Surface Architecture written by David Leatherbarrow and published by MIT Press. This book was released on 2005-02-11 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: A study of the building surface, architecture's primary instrument of identity and engagement with its surroundings. Visually, many contemporary buildings either reflect their systems of production or recollect earlier styles and motifs. This division between production and representation is in some ways an extension of that between modernity and tradition. In this book, David Leatherbarrow and Mohsen Mostafavi explore ways that design can take advantage of production methods such that architecture is neither independent of nor dominated by technology. Leatherbarrow and Mostafavi begin with the theoretical and practical isolation of the building surface as the subject of architectural design. The autonomy of the surface, the "free facade," presumes a distinction between the structural and nonstructural elements of the building, between the frame and the cladding. Once the skin of the building became independent of its structure, it could just as well hang like a curtain, or like clothing. The focus of the relationship between structure and skin is the architectural surface. In tracing the handling of this surface, the authors examine both contemporary buildings and those of the recent past. Architects discussed include Albert Kahn, Ludwig Mies van der Rohe, Alison and Peter Smithson, Alejandro de la Sota, Robert Venturi, Jacques Herzog, and Pierre de Meuron. The properties of a building's surface—whether it is made of concrete, metal, glass, or other materials—are not merely superficial; they construct the spatial effects by which architecture communicates. Through its surfaces a building declares both its autonomy and its participation in its surroundings.
Download or read book Albert Kahn written by Federico Bucci and published by . This book was released on 1993 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough text and some 90 bandw photographs and drawings present the projects of seminal industrial architect Kahn (1869-1942), including the Ford Motor Company River Rouge Plant, Dearborn, Michigan; Burroughs Adding Machine Company, Detroit Michigan; Tractor Plant, Stalingrad, Russia; General Motors Building, Chicago World's Fair; and Kellogg Company, Battle Creek, Michigan. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Collaborative Innovation Networks written by Yang Song and published by Springer. This book was released on 2019-06-26 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collaborative innovation networks are cyberteams of motivated individuals, and are self-organizing emergent social systems with the potential to promote health, happiness and individual growth in real-world work settings. This book describes how to identify and nurture collaborative innovation networks in order to shape the future working environment and pave the way for health and happiness, and how to develop future technologies to promote economic development, social innovation and entrepreneurship. The expert contributions and case studies presented also offer insights into how large corporations can creatively generate solutions to real-world problems by means of self-organizing mechanisms, while simultaneously promoting the well-being of individual workers. The book also discusses how such networks can benefit startups, offering new self-organizing forms of leadership in which all stakeholders are encouraged to collaborate in the development of new products.
