Download or read book Agitator Design Technology for Biofuels and Renewable Chemicals written by Gregory T. Benz and published by John Wiley & Sons. This book was released on 2022-07-21 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Agitator Design Technology for Biofuels and Renewable Chemicals Comprehensive guide to the design, installation, selection, and maintenance of agitators in the biofuels and renewable chemicals industries Agitator Design Technology for Biofuels and Renewable Chemicals is a single-source reference on all the major issues related to agitator design for biofuel, written with the intention of saving the reader time by avoiding the need to consult multiple references or sift through many pages of text to find what is needed for agitator design in specific industries. The work presents a brief introduction of basic principles and relevant theory, then goes on to cover the real-world applications of these principles, including economic evaluations of alternatives as well as supplier evaluation principles. To aid in quick and seamless reader comprehension, each chapter has the symbols used in that chapter listed and defined at the end. Overall, the work is written more as a how-to book than an academic treatise. The highly qualified author has included plenty of brevity throughout the pages with the hopes that readers go through the entire book as a single unit, rather than just skimming an occasional page or chapter as is common with other resources in similar fields. Sample topics covered in the work include: Avoiding common problems, such as using impeller diameters and speeds that would not result in even minimal solids suspension or liquid motion Choosing the right impellers for the job, understanding how power draw and pumping are calculated, and becoming familiar with biofuel/biomass agitator sizing guidelines The principles and limitations of scale-up and the most common non-Newtonian rheology applicable to biofuel applications Designing lab tests and scale-up cellulosic hydrolysis agitation, plus the uses and limitations of Computational Fluid Dynamics (CFD) As an easy-to-read and completely comprehensive resource to the subject, Agitator Design Technology for Biofuels and Renewable Chemicals is immensely valuable for professionals tasked with selecting agitation equipment or troubleshooting existing equipment, as well as those involved in planning activities and allocating resources related to project management.

Download or read book Agitator Design for Gas Liquid Fermenters and Bioreactors written by Gregory T. Benz and published by John Wiley & Sons. This book was released on 2021-03-05 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concise reference to designing mechanically sound agitation systems that will perform the process function efficiently and economically. Currently, all the books on bioreactor and fermenter design do not focus specifically on agitation. Sections cover agitator fundamentals, impeller systems, optimum power and air flow at peak mass transfer calculations, optimizing operation for minimum energy per batch, heat transfer surfaces and calculations, shaft seal considerations, mounting method, mechanical design, and vendor evaluation.

Download or read book Sustainability in Biofuel Production Technology written by Pratibha S. Agrawal and published by John Wiley & Sons. This book was released on 2022-09-06 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainability in Biofuel Production Technology Explore current challenges and the latest technologies in biofuel production In Sustainability in Biofuel Production Technology, a team of engineers and chemists delivers a thorough and accessible exploration of the source of renewable energy biofuels poised to help conserve natural resources and limit the impact of fossil fuel use. The book offers detailed information about the challenges and trends in biodiesel production and includes contributions from leading researchers in the field of biodiesel production. Readers will explore aviation biofuels, biofuel production technologies, reactor design and safety considerations, and the modelling and simulation of biofuel production as they move through the book’s 14 chapters. The authors also analyze the performance of biofuels along with cost estimations and mathematical modeling of various process parameters. Readers will also find: A thorough introduction to biofuels, including their history, generation, classification, and relevant technologies In-depth presentations of the production technologies of biofuels, including chemical and biological production processes Comprehensive explorations of the utilization of biofuels in aviation, including performance analyses and safety considerations Fulsome discussions of key issues and challenges in biofuels production pathways and the environmental effects of biofuels Perfect for academic researchers and industrial scientists working in the biofuels, bioenergy, catalysis, and materials science sectors, Sustainability in Biofuel Production Technology will also be suitable for members of regulatory bodies in the bioenergy sector.

Download or read book Biorefinery Production Technologies for Chemicals and Energy written by Arindam Kuila and published by John Wiley & Sons. This book was released on 2020-09-22 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world has shifted towards sustainable development for the generation of energy and industrially valuable chemicals. Biorefinery plays an important role in the integration of conversion process with high-end equipment facilities for the generation of energy, fuels and chemicals. The first part of the book presents the fundamentals of the biorefinery concept. The second part describes the biorefinery approach for production of several industrially important chemicals from waste biomass and agro residues. These chemicals include industrially important C4. C5 and C6 chemicals, propylene glycol, glycerol byproducts, dyes and inks etc. Each and every chemical has its own industrial value and the book describes the production processes and strategies at the industrial level. The final part of the book describes the various biorefinery approaches and economic analysis for the different types of biofuel production.

Download or read book Global Economic and Environmental Aspects of Biofuels written by David Pimentel and published by CRC Press. This book was released on 2012-04-02 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biofuels and food are dependent on the same resources for production: land, water, and energy. The conjuncture of food, energy, and climate crises demands a new direction in how to harness agriculture to the joint tasks of energy-saving, emissions reduction, and food security. Global Economic and Environmental Aspects of Biofuels focuses on the all-important question of the efficacy of biofuels as a solution to the global energy problem. Written by a distinguished team from five countries and multiple disciplines including agronomy, petroleum engineering, ecology, and meteorology, the book addresses the use of biofuels produced from crops and various organic materials as alternatives or supplements to petroleum. Key Features Discusses biofuels within the context of the world population problem, food, malnutrition, resource depletion, and climate change Asks the critical question whether the production of ethanol from corn, sugar cane, crop residues, and other organic materials has proven too costly in both economic and environmental terms Analyzes the uses and interdependencies among land, water, and fossil energy resources in food versus biofuel production Includes case studies on the economic and environmental impacts of biofuel production and use from the United States, Europe, Brazil, and tropical environments Explores the future production of biodiesel and ethanol from salt-water algae and tropical palms, while recognizing the technological problems that must be resolved in processing these materials This book examines key environmental and economic issues associated with the production of ethanol as a fuel, from corn, sugar cane, crop residues, and other organic materials. It brings together the opinions of a number of U.S. scientists and experts from Spain, Italy, the United Kingdom, and Brazil, and highlights the remarkable agreement among the contributors on the pros and cons of biofuels as an answer to future petroleum shortages. This mix of contributors and opinions presents a well-rounded view of the subject that puts a spotlight on unresolved concerns and complexities that are often overlooked.

Download or read book Process Systems Engineering for Biofuels Development written by Adrian Bonilla-Petriciolet and published by John Wiley & Sons. This book was released on 2020-10-05 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of current developments and applications in biofuels production Process Systems Engineering for Biofuels Development brings together the latest and most cutting-edge research on the production of biofuels. As the first book specifically devoted to process systems engineering for the production of biofuels, Process Systems Engineering for Biofuels Development covers theoretical, computational and experimental issues in biofuels process engineering. Written for researchers and postgraduate students working on biomass conversion and sustainable process design, as well as industrial practitioners and engineers involved in process design, modeling and optimization, this book is an indispensable guide to the newest developments in areas including: Enzyme-catalyzed biodiesel production Process analysis of biodiesel production (including kinetic modeling, simulation and optimization) The use of ultrasonification in biodiesel production Thermochemical processes for biomass transformation to biofuels Production of alternative biofuels In addition to the comprehensive overview of the subject of biofuels found in the Introduction of the book, the authors of various chapters have provided extensive discussions of the production and separation of biofuels via novel applications and techniques.

Download or read book Biofuels Production and Processing Technology written by M.R. Riazi and published by CRC Press. This book was released on 2017-10-10 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of biofuels in greening the transport sector in the future is unquestionable, given the limited available fossil energy resources, the environmental issues associated to the utilization of fossil fuels, and the increasing attention to security of supply. This comprehensive reference presents the latest technology in all aspects of biofuels production, processing, properties, raw materials, and related economic and environmental aspects. Presenting the application of methods and technology with minimum math and theory, it compiles a wide range of topics not usually covered in one single book. It discusses development of new catalysts, reactors, controllers, simulators, online analyzers, and waste minimization as well as design and operational aspects of processing units and financial and economic aspects. The book rounds out by describing properties, specifications, and quality of various biofuel products and new advances and trends towards future technology.

Download or read book Biofuels Engineering Process Technology Second Edition written by Caye M. Drapcho and published by McGraw Hill Professional. This book was released on 2020-07-21 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. Fully updated processes for the production of renewable and environmentally safe biofuels This thoroughly revised guide presents a complete and up-to-date introduction to biofuels process technology. Written by a team of industry-leading experts, Biofuels Engineering Process Technology, Second Edition shows, step by step, how renewable feedstocks are processed and how biofuels are refined. You will explore the entire spectrum of biofuel processes, including the production of ethanol from sugarcane and corn, biodiesel from animal fats and plant oils, and methane by anaerobic digestion. The book clearly explains newly developed technologies for the production of drop-in biofuels and the use of microbial fuel cells to produce electricity. Coverage includes: • An introduction to biofuel engineering processes • Harvesting energy from biochemical reactions • Microbial modeling of biofuel production • Biofuels feedstocks • Ethanol • Biodiesel • Drop-in biofuels • Biological production of hydrogen • Microbial fuel cells • Methane • And more

Download or read book Bioprocessing Technologies in Biorefinery for Sustainable Production of Fuels Chemicals and Polymers written by Shang-Tian Yang and published by Wiley-AIChE. This book was released on 2013-07-10 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: For researchers already familiar with biomass conversion technologies and for professionals in other fields, such as agriculture, food, and chemical industries, here is a comprehensive review of the emerging biorefinery industry. The book's content has been conveniently organized according to technologies (biomass feedstock and pretreatment, hydrolytic enzymes in biorefinery, and biofuels), with each chapter highlighting an important biobased industrial product. For undergraduate and graduate students, the book is a thorough introduction to biorefinery technologies.

Download or read book Prospects of Renewable Bioprocessing in Future Energy Systems written by Ali Asghar Rastegari and published by Springer. This book was released on 2019-04-03 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses various renewable energy resources and technologies. Topics covered include recent advances in photobioreactor design; microalgal biomass harvesting, drying, and processing; and technological advances and optimised production systems as prerequisites for achieving a positive energy balance. It highlights alternative resources that can be used to replace fossil fuels, such as algal biofuels, biodiesel, bioethanol, and biohydrogen. Further, it reviews microbial technologies, discusses an immobilization method, and highlights the efficiency of enzymes as a key factor in biofuel production. In closing, the book outlines future research directions to increase oil yields in microalgae, which could create new opportunities for lipid-based biofuels, and provides an outlook on the future of global biofuel production. Given its scope, the book will appeal to all researchers and engineers working in the renewable energy sector.

Download or read book Intensification of Biobased Processes written by Andrzej Gorak and published by Royal Society of Chemistry. This book was released on 2018-06-18 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years bioprocessing has increased in popularity and importance, however, bioprocessing still poses various important techno-economic and environmental challenges, such as product yields, excessive energy consumption for separations in highly watery systems, batch operation or the downstream processing bottlenecks in the production of biopharmaceutical products. Many of those challenges can be addressed by application of different process intensification technologies discussed in the present book. The first book dedicated entirely to this area, Intensification of Biobased Processesprovides a comprehensive overview of modern process intensification technologies used in bioprocessing. The book focusses on four different categories of biobased products: bio-fuels and platform chemicals; cosmeceuticals; food products; and polymers and advanced materials. It will cover various intensification aspects of the processes concerned, including (bio)reactor intensification; intensification of separation, recovery and formulation operations; and process integration. This is an invaluable source of information for researchers and industrialists working in chemical engineering, biotechnology and process engineering.

Download or read book Bioalcohol Production written by Keith W. Waldron and published by Elsevier. This book was released on 2010-05-24 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioethanol is one of the main biofuels currently used as a petroleum-substitute in transport applications. However, conflicts over food supply and land use have made its production and utilisation a controversial topic. Second generation bioalcohol production technology, based on (bio)chemical conversion of non-food lignocellulose, offers potential advantages over existing, energy-intensive bioethanol production processes. Food vs. fuel pressures may be reduced by utilising a wider range of lignocellulosic biomass feedstocks, including energy crops, cellulosic residues, and, particularly, wastes. Bioalcohol production covers the process engineering, technology, modelling and integration of the entire production chain for second generation bioalcohol production from lignocellulosic biomass. Primarily reviewing bioethanol production, the book’s coverage extends to the production of longer-chain bioalcohols which will be elemental to the future of the industry. Part one reviews the key features and processes involved in the pretreatment and fractionation of lignocellulosic biomass for bioalcohol production, including hydrothermal and thermochemical pretreatment, and fractionation to separate out valuable process feedstocks. Part two covers the hydrolysis (saccharification) processes applicable to pretreated feedstocks. This includes both acid and enzymatic approaches and also importantly covers the development of particular enzymes to improve this conversion step. This coverage is extended in Part three, with chapters reviewing integrated hydrolysis and fermentation processes, and fermentation and co-fermentation challenges of lignocellulose-derived sugars, as well as separation and purification processes for bioalcohol extraction. Part four examines the analysis, monitoring and modelling approaches relating to process and quality control in the pretreatment, hydrolysis and fermentation steps of lignocellulose-to-bioalcohol production. Finally, Part five discusses the life-cycle assessment of lignocellulose-to-bioalcohol production, as well as the production of valuable chemicals and longer-chain alcohols from lignocellulosic biomass. With its distinguished international team of contributors, Bioalcohol production is a standard reference for fuel engineers, industrial chemists and biochemists, plant scientists and researchers in this area. Provides an overview of the life-cycle assessment of lignocelluloses-to-bioalcohol production Reviews the key features and processes involved in the pre-treatment and fractionation of lignocellulosic biomass for bioalcohol production Examines the analysis, monitoring and modelling approaches relating to process and quality control in pre-treatment, hydrolysis and fermentation

Download or read book Handbook of Alternative Fuel Technologies Second Edition written by Sunggyu Lee and published by CRC Press. This book was released on 2014-07-08 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: While strides are being made in the research and development of environmentally acceptable and more sustainable alternative fuels—including efforts to reduce emissions of air pollutants associated with combustion processes from electric power generation and vehicular transportation—fossil fuel resources are limited and may soon be on the verge of depletion in the near future. Measuring the correlation between quality of life, energy consumption, and the efficient utilization of energy, the Handbook of Alternative Fuel Technologies, Second Edition thoroughly examines the science and technology of alternative fuels and their processing technologies. It focuses specifically on environmental, technoeconomic, and socioeconomic issues associated with the use of alternative energy sources, such as sustainability, applicable technologies, modes of utilization, and impacts on society. Written with research and development scientists and engineers in mind, the material in this handbook provides a detailed description and an assessment of available and feasible technologies, environmental health and safety issues, governmental regulations, and issues and agendas for R&D. It also includes alternative energy networks for production, distribution, and consumption. What’s New in This Edition: Contains several new chapters of emerging interest and updates various chapters throughout Includes coverage of coal gasification and liquefaction, hydrogen technology and safety, shale fuel by hydraulic fracturing, ethanol from lignocellulosics, biodiesel, algae fuels, and energy from waste products Covers statistics, current concerns, and future trends A single-volume complete reference, the Handbook of Alternative Fuel Technologies, Second Edition contains relevant information on chemistry, technology, and novel approaches, as well as scientific foundations for further enhancements and breakthroughs. In addition to its purposes as a handbook for practicing scientists and engineers, it can also be used as a textbook or as a reference book on fuel science and engineering, energy and environment, chemical process design, and energy and environmental policy.

Download or read book Biofuels from Algae written by Kuan-Yeow Show and published by Elsevier Inc. Chapters. This book was released on 2013-08-08 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensive effort is being made globally to develop various biofuels as an inexhaustible and renewable energy source. Biofuels are viewed as promising alternatives to conventional fossil fuels because they have the potential to eliminate major environmental problems such as global warming and climate change created by fossil fuels. Among the still-developing biofuel technologies, biodiesel production from algae offers a good prospect for large-scale practical use, considering the fact that algae are capable of producing much more yield than other biofuels such as corn and soybean crops. Although research on algae-based biofuel is still in its developing stage, extensive work on laboratory- and pilot-scale algae-harvesting systems with promising prospects has been reported. This chapter presents a discussion of the literature review of recent advances in algal biomass harvesting. The chapter focuses on stability and separability of algae and algae-harvesting methods. Challenges and prospects of algae harvesting are also outlined. The review aims to provide useful information for future development of efficient and commercially viable algal biodiesel production.

Download or read book Advances in Industrial Mixing written by Suzanne M. Kresta and published by John Wiley & Sons. This book was released on 2016-03-11 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Industrial Mixing is a companion volume and update to the Handbook of Industrial Mixing. The second volume fills in gaps for a number of industries that were not covered in the first edition. Significant changes in five of the fundamental areas are covered in entirely updated or new chapters. The original text is provided as a searchable pdf file on the accompanying USB. This book explains industrial mixers and mixing problems clearly and concisely. Gives practical insights by the top professionals in the field, combining industrial design standards with fundamental insight. Details applications in 14 key industries. Six of these are new since the first edition. Provides the professional with information he/she did not receive in school. Five completely rewritten chapters on mixing fundamentals where significant advances have happened since the first edition and seven concise update chapters which summarize critical technical information.

Download or read book Biofuels Production written by Vikash Babu and published by John Wiley & Sons. This book was released on 2013-09-09 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: The search for alternative sources of energy to offset diminishing resources of easy and cost-effective fossil fuels has become a global initiative, and fuel generated from biomass is a leading competitor in this arena. Large-scale introduction of biofuels into the energy mix could contribute to environmentally and economicaly sustainable development on a global scale. The processes and methodologies presented in this volume will offer a cutting-edge and comprehensive approach to the production of biofuels, for engineers, researchers, and students.

Download or read book Chemical Process Design written by Alexandre C. Dimian and published by John Wiley & Sons. This book was released on 2008-04-09 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical how-to-do book deals with the design of sustainable chemical processes by means of systematic methods aided by computer simulation. Ample case studies illustrate generic creative issues, as well as the efficient use of simulation techniques, with each one standing for an important issue taken from practice. The didactic approach guides readers from basic knowledge to mastering complex flow-sheets, starting with chemistry and thermodynamics, via process synthesis, efficient use of energy and waste minimization, right up to plant-wide control and process dynamics. The simulation results are compared with flow-sheets and performance indices of actual industrial licensed processes, while the complete input data for all the case studies is also provided, allowing readers to reproduce the results with their own simulators. For everyone interested in the design of innovative chemical processes.