Download or read book Advances in Welding Metal Alloys Dissimilar Metals and Additively Manufactured Parts written by Giuseppe Casalino and published by MDPI. This book was released on 2018-11-29 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Advances in Welding Metal Alloys, Dissimilar Metals and Additively Manufactured Parts" that was published in Metals

Download or read book Dissimilar Metal Welding written by Pierpaolo Carlone and published by MDPI. This book was released on 2019-12-12 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combination of distinct materials is a key issue in modern industry, whereas the driving concept is to design parts with the right material in the right place. In this framework, a great deal of attention is directed towards dissimilar welding and joining technologies. In the automotive sector, for instance, the concept of “tailored blanks”, introduced in the last decade, has further highlighted the necessity to weld dissimilar materials. As far as the aeronautic field is concerned, most structures are built combining very different materials and alloys, in order to match lightweight and structural performance requirements. In this framework, the application of fusion welding techniques, namely, tungsten inert gas or laser welding, is quite challenging due to the difference in physical properties, in particular the melting point, between adjoining materials. On the other hand, solid-state welding methods, such as the friction stir welding as well as linear friction welding processes, have already proved to be capable of manufacturing sound Al-Cu, Al-Ti, Al-SS, and Al-Mg joints, to cite but a few. Recently, promising results have also been obtained using hybrid methods. Considering the novelty of the topic, many relevant issues are still open, and many research groups are continuously publishing valuable results. The aim of this book is to finalize the latest contributions on this topic.

Download or read book Machining of Light Alloys written by Diego Carou and published by CRC Press. This book was released on 2018-08-06 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium, magnesium and titanium are alloys of special interest for engineering applications in a wide range of sectors such as aeronautics, automotive and medical. Their low density, along with sufficient mechanical properties, makes them especially adequate for sectors such as transportation allowing diminishing weight less fuel consumption and emissions to the atmosphere. Nowadays, machining is still one the most important manufacturing processes, not only for metal parts, but also for specially designed hybrid parts for more demanding new applications. A wide range of valuable research has been done on the machining of conventional engineering materials. However, when dealing with light alloys and hybrid materials containing them, they need to face new challenges. Particularly, it is important to analyse the suitability of the machining of these alloys in the current context of Industry 4.0, focusing on the development of cost-effective and sustainable processes. This book is a comprehensive source on the machining of light alloys, presenting a collection of both experimental and review studies. The work is arranged in eight chapters, presented by a group of international scholars, which analyse the main problems related to the machining of these alloys from different perspectives. Key Features A comprehensive state-of-the-art reference source on machining of light alloys Provides research on conventional and non-conventional machining process Offers current research topics on sustainable machining Presents research on the machining of hybrid materials using light alloys Includes applications for Industry 4.0 environments Machining of Light Alloys: Aluminum, Titanium, and Magnesium The aim of the book is to serve as a tool for helping researchers and practitioners to face machining challenges and facilitating the development of new industrial applications for light alloys.

Download or read book Advances in Additive Manufacturing Processes written by Jeyaprakash Natarajan and published by Bentham Science Publishers. This book was released on 2021-11-29 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing or 3D printing is the construction of an object using CAD models. The technology for additive manufacturing s gaining traction in recent times due to its accessibility for both personal and industrial use, as well as its usefulness in quick prototyping (either of a whole object or its components) and meeting the needs of small commercial workloads. Advances in Additive Manufacturing Processes informs readers about the breadth of 3D printing processes. Chapters cover the basic knowledge of additive techniques and their industrial applications with relevant examples. The improvements in each method and their recent technical achievements with practical experimental data are highlighted. The book presents eight types of 3D printing processes, covering a diverse range of technologies which represent the industry. The contents also cover selected topics of relevance to additive manufacturing which include the formation of defects and factors that affect the mechanical properties of the additively manufactured components. Chapters also provide recent guidelines for adapting additive manufacturing processes to increase productivity and reduce manufacturing cost. Advances in Additive Manufacturing Processes is a handy reference for scholars and professionals involved in manufacturing industries and process engineering as well as hobbyists who are interested in the current state-of-the-art in 3D printing.

Download or read book Advanced Welding Techniques written by Himanshu Vashishtha and published by CRC Press. This book was released on 2024-09-11 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: To meet weight, quality, and cost targets, it is essential to design, develop, and manufacture optimal, cost- effective welded structures that take into consideration material, process, and dimensioning procedures. For effective design, a weld designer must have a comprehensive grasp of welding basics, associated metallurgy, and fabrication and characterization processes. Advanced Welding Techniques highlights breakthroughs in advances in welding methods and provides readers with the ability to accurately identify the appropriate welding processes and optimal improvement methods for intended applications. It offers comprehensive guidance on welding design to ensure readers are equipped to provide solutions to any technical malfunctions they may encounter, including: Supplies essential stepwise knowledge on design for welding, starting with the fundamentals to the complex Covers role of filler metals and parameters on welding performance, emerging and advanced welding techniques, and advantages and limitations of various methods Discusses integration of additive manufacturing and welding Contains practical applications Considers challenges and future scope for further research as well as future challenges This book offers students, academics, researchers, scientists, engineers, and industry experts a comprehensive overview of the most recent breakthroughs in advanced welding methods and their applications to joining various metals and their alloys.

Download or read book Advanced Joining Technologies written by Manjaiah M and published by CRC Press. This book was released on 2024-03-13 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers advances in fusion and solid-state welding processes including basics, welding metallurgy, defect formation, and the effect of process parameters on mechanical properties. Details of the microstructural and mechanical behaviors of weldments are included. This book covers challenges encountered during dissimilar welding of metal by fusion and solid-state welding processes, including remedial solutions and hybrid processes to counter the same. Numerical and statistical simulation approaches used in the welding process for parameter optimization and material flow studies are described as well. Features: Provides details related to the microstructural and mechanical behaviors of welded joints developed by different welding processes. Covers recent research content, metallurgical analysis, and simulation aspects. Discusses the joining of plastics and ceramics. Includes a dedicated chapter on machine learning and digital twin in welding. Explores difficulties associated with the joining of dissimilar metals and alloys. This book is aimed at researchers and graduate students in material joining and characterization and welding.

Download or read book Additive Manufacturing Applications for Metals and Composites written by Balasubramanian, K.R. and published by IGI Global. This book was released on 2020-06-19 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) of metals and composites using laser energy, direct energy deposition, electron beam methods, and wire arc melting have recently gained importance due to their advantages in fabricating the complex structure. Today, it has become possible to reliably manufacture dense parts with certain AM processes for many materials, including steels, aluminum and titanium alloys, superalloys, metal-based composites, and ceramic matrix composites. In the near future, the AM material variety will most likely grow further, with high-performance materials such as intermetallic compounds and high entropy alloys already under investigation. Additive Manufacturing Applications for Metals and Composites is a pivotal reference source that provides vital research on advancing methods and technological developments within additive manufacturing practices. Special attention is paid to the material design of additive manufacturing of parts, the choice of feedstock materials, the metallurgical behavior and synthesis principle during the manufacturing process, and the resulted microstructures and properties, as well as the relationship between these factors. While highlighting topics such as numerical modeling, intermetallic compounds, and statistical techniques, this publication is ideally designed for students, engineers, researchers, manufacturers, technologists, academicians, practitioners, scholars, and educators.

Download or read book Advances in Additive Manufacturing and Joining written by M. S. Shunmugam and published by Springer Nature. This book was released on 2019-10-16 with total page 723 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents research papers on additive manufacturing (popularly known as 3D printing) and joining which were presented during the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018). The contents of this volume present the latest technological advancements for improving the efficiency, accuracy and speed of the additive manufacturing process and in fusion and solid-state welding technologies, with a variety of technologies, including fused deposition modelling, poly jet 3D printing, weld deposition based technology, selective laser melting and important welding technologies being covered. This volume will be of interest to academicians, researchers, and practicing engineers alike.

Download or read book Advances in Additive Manufacturing and Metal Joining written by N. Ramesh Babu and published by Springer Nature. This book was released on 2023-05-16 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the 8th International and 29th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2021). It discusses the latest advances in miniature manufacturing, machining of miniature components, surface engineering, nanomaterials, nanotechnology, Industry 4.0, optimization techniques, micro-electric discharge machining, electrochemical micro-machining, thin films, optimization of micro-machining process parameters, machining of nano-composites, characterization using atomic force microscopy, micro-tool fabrications, characterization of nano-composites, surface roughness analysis, tribological performance of surface coated materials and sustainability in manufacturing. The contents of this book are useful for students, researchers and as well as industry professionals in the various fields of mechanical engineering.

Download or read book Progress in Metal Additive Manufacturing and Metallurgy written by Robert Pederson and published by MDPI. This book was released on 2020-12-03 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advent of additive manufacturing (AM) processes applied to the fabrication of structural components creates the need for design methodologies supporting structural optimization approaches that take into account the specific characteristics of the process. While AM processes enable unprecedented geometrical design freedom, which can result in significant reductions of component weight, on the other hand they have implications in the fatigue and fracture strength due to residual stresses and microstructural features. This is linked to stress concentration effects and anisotropy that still warrant further research. This Special Issue of Applied Sciences brings together papers investigating the features of AM processes relevant to the mechanical behavior of AM structural components, particularly, but not exclusively, from the viewpoints of fatigue and fracture behavior. Although the focus of the issue is on AM problems related to fatigue and fracture, articles dealing with other manufacturing processes with related problems are also be included.

Download or read book Advances in Welding Technologies for Process Development written by Jaykumar Vora and published by CRC Press. This book was released on 2019-02-22 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within manufacturing, welding is by far the most widely used fabrication method used for production, leading to a rise in research and development activities pertaining to the welding and joining of different, similar, and dissimilar combinations of the metals. This book addresses recent advances in various welding processes across the domain, including arc welding and solid-state welding process, as well as experimental processes. The content is structured to update readers about the working principle, predicaments in existing process, innovations to overcome these problems, and direct industrial and practical applications. Key Features: Describes recent developments in welding technology, engineering, and science Discusses advanced computational techniques for procedure development Reviews recent trends of implementing DOE and meta-heuristics optimization techniques for setting accurate parameters Addresses related theoretical, practical, and industrial aspects Includes all the aspects of welding, such as arc welding, solid state welding, and weld overlay

Download or read book Processing and Fabrication of Advanced Materials Volume 2 written by Ajay Kumar and published by Springer Nature. This book was released on with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Recent Advances in Manufacturing Processes and Systems written by Harshit K. Dave and published by Springer Nature. This book was released on 2022-03-03 with total page 1006 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of 2nd International Conference on Recent Advances in Manufacturing (RAM 2021). The book provides insights into the current research trends and development in manufacturing processes. The topics covered include conventional and nonconventional manufacturing processes, micro and nano manufacturing processes, chemical and biochemical manufacturing, additive manufacturing, smart manufacturing, and sustainable and energy-efficient manufacturing. The contributions presented here are intended to stimulate new research directions in the manufacturing domain. This book will be useful for the beginners, researchers and professionals working in the area of industrial and production engineering and allied fields.

Download or read book Metal Polymer Multi Material Structures and Manufacturing Techniques in Transportation written by Sergio T. Amancio-Filho and published by MDPI. This book was released on 2020-12-10 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reduction of greenhouse gas emissions—particularly from fossil fuel-powered vehicles and airplanes by means of weight savings and leaner fuel consumption, helps to restrain environmental impacts. In general, for a variety of industries, and specifically in the case of transport, where both weight savings and increased energy efficiency are pursued, the use of metal–polymer multi-material structures has been growing at an increasing and particularly fast pace in recent years. Several manufacturing techniques have been, or are being, developed, with the aim of being used for producing dissimilar materials in cost-efficient manners. This book presents recent developments in the state of the art of advanced additive manufacturing and the joining of metal–polymer multi-material structures in transportation. This publication mainly focuses on the correlations between microstructure, manufacturing process (i.e., AddJoining, adhesive bonding, friction riveting, friction-based staking and friction spot joining) properties, and the mechanical performance of metal–polymer multi-material structures.

Download or read book Handbook of Research on Advancements in the Processing Characterization and Application of Lightweight Materials written by Kumar, Kaushik and published by IGI Global. This book was released on 2021-11-19 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the automotive industry, the need to reduce vehicle weight has given rise to extensive research efforts to develop aluminum and magnesium alloys for structural car body parts. In aerospace, the move toward composite airframe structures urged an increased use of formable titanium alloys. In steel research, there are ongoing efforts to design novel damage-controlled forming processes for a new generation of efficient and reliable lightweight steel components. All these materials, and more, constitute today’s research mission for lightweight structures. They provide a fertile materials science research field aiming to achieve a better understanding of the interplay between industrial processing, microstructure development, and the resulting material properties. The Handbook of Research on Advancements in the Processing, Characterization, and Application of Lightweight Materials provides the recent advancements in the lightweight mat materials processing, manufacturing, and characterization. This book identifies the need for modern tools and techniques for designing lightweight materials and addresses multidisciplinary approaches for applying their use. Covering topics such as numerical optimization, fatigue characterization, and process evaluation, this text is an essential resource for materials engineers, manufacturers, practitioners, engineers, academicians, chief research officers, researchers, students, and vice presidents of research in government, industry, and academia.

Download or read book Advanced Materials and Engineering Materials IX written by Peng Sheng Wei and published by Trans Tech Publications Ltd. This book was released on 2020-09-02 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected peer-reviewed full text papers from the 9th International Conference on Advanced Materials and Engineering Materials (ICAMEM 2020) Selected, peer-reviewed papers from the 9th International Conference on Advanced Materials and Engineering Materials (ICAMEM 2020), July 3-5, 2020, Bangkok, Thailand

Download or read book Advanced Manufacturing Techniques for Engineering and Engineered Materials written by Thanigaivelan, R. and published by IGI Global. This book was released on 2022-03-11 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: As technology advances, it is imperative to stay current in the newest developments made within the engineering industry and within material sciences. Trends in manufacturing such as 3D printing, casting, welding, surface modification, computer numerical control (CNC), non-traditional, Industry 4.0 ergonomics, and hybrid machining methods must be closely examined to utilize these important resources for the betterment of society. Advanced Manufacturing Techniques for Engineering and Engineered Materials provides a unified and complete overview about the recent and emerging trends, developments, and associated technology with scope for the commercialization of techniques specific to manufacturing materials. This book also reviews the various machining methods for difficult-to-cut materials and novel materials including matrix composites. Covering topics such as agro-waste, conventional machining, and material performance, this book is an essential resource for researchers, engineers, technologists, students and professors of higher education, industry workers, entrepreneurs, researchers, and academicians.