Download or read book Advances in Underwater Technology Ocean Science and Offshore Engineering 12 Einzelaufsaetze Volume 11 Underwater Construction Development and Potential written by and published by . This book was released on 1987 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Underwater Construction Development and Potential written by Society for Underwater Technology (SUT) and published by Springer. This book was released on 1987-10-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Falling oil prices and smaller offshore fields, especially in the UK sector of the North Sea, have produced a resurgence of interest in subsea developments. These developments always include the installation of a subsea structure and laying and tying-in of pipeline and control lines. In the Southern North Sea small unmanned jackets may become widely used and these require subsea control and power lines installation. This change in the offshore scene has produced a potentially larger market for underwater construction activities. Companies engaged in underwater design and construction have been developing new equipment and techniques to enable further economies to be realised. It is not only in hydrocarbon development where underwater construction plays a major role. One of the largest offshore construction projects on the UK Continental Shelf in recent years is the cross-channel link where power cables have been laid between the UK and France. This volume looks at the economic outlook and the breadth of underwater construction operations; important developments in techniques and equip ment are presented together with a discussion of various projects in which they have been successfully used. PART I 1 An overview of subsea construction R. Goodfellow, Goodfellow Associates Ltd INTRODUCTION Working underwater is a lot more difficult than working above water or on land, therefore the incentives to do so must be found in some aspects of project realization, such as: • reduced cost; • advantageous schedule; • improved technology.
Download or read book Underwater Construction Development and Potential written by Society for Underwater Technology and published by Springer. This book was released on 1987-10-31 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Falling oil prices and smaller offshore fields, especially in the UK sector of the North Sea, have produced a resurgence of interest in subsea developments. These developments always include the installation of a subsea structure and laying and tying-in of pipeline and control lines. In the Southern North Sea small unmanned jackets may become widely used and these require subsea control and power lines installation. This change in the offshore scene has produced a potentially larger market for underwater construction activities. Companies engaged in underwater design and construction have been developing new equipment and techniques to enable further economies to be realised. It is not only in hydrocarbon development where underwater construction plays a major role. One of the largest offshore construction projects on the UK Continental Shelf in recent years is the cross-channel link where power cables have been laid between the UK and France. This volume looks at the economic outlook and the breadth of underwater construction operations; important developments in techniques and equip ment are presented together with a discussion of various projects in which they have been successfully used. PART I 1 An overview of subsea construction R. Goodfellow, Goodfellow Associates Ltd INTRODUCTION Working underwater is a lot more difficult than working above water or on land, therefore the incentives to do so must be found in some aspects of project realization, such as: • reduced cost; • advantageous schedule; • improved technology.
Download or read book Underwater Construction Development and Potential written by Society for Underwater Technology (SUT) and published by Springer. This book was released on 2011-09-26 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Falling oil prices and smaller offshore fields, especially in the UK sector of the North Sea, have produced a resurgence of interest in subsea developments. These developments always include the installation of a subsea structure and laying and tying-in of pipeline and control lines. In the Southern North Sea small unmanned jackets may become widely used and these require subsea control and power lines installation. This change in the offshore scene has produced a potentially larger market for underwater construction activities. Companies engaged in underwater design and construction have been developing new equipment and techniques to enable further economies to be realised. It is not only in hydrocarbon development where underwater construction plays a major role. One of the largest offshore construction projects on the UK Continental Shelf in recent years is the cross-channel link where power cables have been laid between the UK and France. This volume looks at the economic outlook and the breadth of underwater construction operations; important developments in techniques and equip ment are presented together with a discussion of various projects in which they have been successfully used. PART I 1 An overview of subsea construction R. Goodfellow, Goodfellow Associates Ltd INTRODUCTION Working underwater is a lot more difficult than working above water or on land, therefore the incentives to do so must be found in some aspects of project realization, such as: • reduced cost; • advantageous schedule; • improved technology.
Download or read book Underwater Construction written by and published by . This book was released on 1987 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Submersible Technology Adapting to Change written by and published by Springer. This book was released on 1988-02-29 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: To maintain quality in research output, providing the necessary new knowledge for our developing industries must be of prime importance to our community. This is an extremely difficult task when viewed in the context ofthe rapid rate of change being experienced within our national industrial scene. Collaborative research programmes designed to constantly monitor and improve the quality of output, through regular reporting and assessment of achieved goals against defined targets, can help the growth of our industry and benefit the rest of society. The government has established initiatives to encourage collaboration and the transfer of technology between the research and development domains. There are many signs that industry and the universities are making a concerted effort to adapt their working practices and relationships to meet the rapidly changing industrial environment. There are still many shortfalls and areas for improvement. Some of the extremes of government educational policy can, and will, seriously impair the evolution of, and benefits gained from, the collabo ration initiatives. These must be resisted by academe and industry alike if we are to make new advances against foreign competition. Joint R. and D. projects do work, and can be made to work. To achieve the steady growth of healthy and fruitful relationships they must, however, be given a good environment and a nourishing diet. REFERENCES 1. Alvey Programme Annual Report(s), Alvey Directorate, Millbank Tower, Millbank, London, SW1P 4QU. 2. Annual Review o{ Government Funded R. & D. (1985). (From the Cabinet Office), Her Majesty's Stationery Office.
Download or read book Environmental Forces on Offshore Structures and Their Prediction written by Society for Underwater Technology and published by Springer. This book was released on 1990 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Submersible Technology Adapting to Change written by Society for Underwater Technology (SUT) and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: To maintain quality in research output, providing the necessary new knowledge for our developing industries must be of prime importance to our community. This is an extremely difficult task when viewed in the context ofthe rapid rate of change being experienced within our national industrial scene. Collaborative research programmes designed to constantly monitor and improve the quality of output, through regular reporting and assessment of achieved goals against defined targets, can help the growth of our industry and benefit the rest of society. The government has established initiatives to encourage collaboration and the transfer of technology between the research and development domains. There are many signs that industry and the universities are making a concerted effort to adapt their working practices and relationships to meet the rapidly changing industrial environment. There are still many shortfalls and areas for improvement. Some of the extremes of government educational policy can, and will, seriously impair the evolution of, and benefits gained from, the collabo ration initiatives. These must be resisted by academe and industry alike if we are to make new advances against foreign competition. Joint R. and D. projects do work, and can be made to work. To achieve the steady growth of healthy and fruitful relationships they must, however, be given a good environment and a nourishing diet. REFERENCES 1. Alvey Programme Annual Report(s), Alvey Directorate, Millbank Tower, Millbank, London, SW1P 4QU. 2. Annual Review o{ Government Funded R. & D. (1985). (From the Cabinet Office), Her Majesty's Stationery Office.
Download or read book Advances in Underwater Inspection and Maintenance written by Society for Underwater Technology (SUT) and published by Springer. This book was released on 1990-01-31 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Underwater Construction written by and published by . This book was released on 1987 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Installation of Subsea Systems written by Society for Underwater Technology (SUT) and published by Springer Science & Business Media. This book was released on 1985-05-31 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Underwater Technology Ocean Science and Offshore Engineering written by and published by . This book was released on 1986 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book SUBTECH 91 written by Society for Underwater Technology (SUT) and published by Springer. This book was released on 1991-10-31 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concept of using flexible, reelable pipe to transport liquids, gases, and vapours is not a new one. As early as the 1940s a steel braided elastomeric pipeline was developed for the Allied Forces in order to transport fuels to support the Normandy Beacheads. In fact, the longest flexible pipeline ever constructed is likely to be that laid across the English Channel as part of 'Operation Pluto'. The methodology used to handle and instal such pipe is also not new. Ellis (1943, London) in an early patent specification identifies three basic objectives for a flexible pipelining method. These are: prefabrication of the pipe onshore; coiling of the pipe on suitable drums or reels; and using such reels to lay pipe from anchored or motorised barges. The design concept for flexible pipe is also not a new invention given that flexible hoses and umbilicals have been in service for more than sixty years. A break-through was however achieved by the French Institute of Petroleum in the early 1970s when they developed an improved steel reinforced pipe structure having a high axial loading capaci ty which utilised corrosion and hydrocarbon resistant polymers to extend pipe service lifetime. This early pipe design utilised established cable making techniques to apply steel armour and axially and radially reinforce alternating layers of polymer sheaths. The pipe was primarily developed as a flowline for use in static seabed applications.
Download or read book Subsea Control and Data Acquisition written by Society for Underwater Technology and published by Springer Science & Business Media. This book was released on 1990-03-31 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: The biennial conferences of the Society for Underwater Technology have achieved an excellent reputation for the quality of their presentations, which cover topics of the most acute current interest, as well as those at the forefront of review and development. The 1994 conference on Subsea Control and Data Acquisition formed no exception, since it covers subjects at the cutting edge of modern technology. It is a matter of increasing concern that products are becoming overspecified, resulting in excessive costs and longer development schedules, while not conferring an equivalent benefit in reliability of the finished product. Subsea Control and Data Acquisition is vital reading for all subsea control system designers, manufacturers and operators, equipment consultants, application engineers, academics in the subsea engineering field, and all subsea engineers.
Download or read book Encyclopedia of Ocean Engineering written by Weicheng Cui and published by Springer Nature. This book was released on 2022-06-29 with total page 2203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This encyclopedia adopts a wider definition for the concept of ocean engineering. Specifically, it includes (1) offshore engineering: fixed and floating offshore oil and gas platforms; pipelines and risers; cables and moorings; buoy technology; foundation engineering; ocean mining; marine and offshore renewable energy; aquaculture engineering; and subsea engineering; (2) naval architecture: ship and special marine vehicle design; intact and damaged stability; technology for energy efficiency and green shipping; ship production technology; decommissioning and recycling; (3) polar and Arctic Engineering: ice mechanics; ice-structure interaction; polar operations; polar design; environmental protection; (4) underwater technologies: AUV/ROV design; AUV/ROV hydrodynamics; maneuvering and control; and underwater-specific communicating and sensing systems for AUV/ROVs. It summarizes the A–Z of the background and application knowledge of ocean engineering for use by ocean scientists and ocean engineers as well as nonspecialists such as engineers and scientists from all disciplines, economists, students, and politicians. Ocean engineering theories, ocean devices and equipment, ocean design and operation technologies are described by international experts, many from industry and each entry offers an introduction and references for further study, making current technology and operating practices available for future generations to learn from. The book also furthers our understanding of the current state of the art, leading to new and more efficient technologies with breakthroughs from new theory and materials. As the land resources approach the exploitation limit, ocean resources are becoming the next choice for the sustainable development. As such, ocean engineering is vital in the 21st century.
Download or read book Submersible Technology written by Society for Underwater Technology (SUT) and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Subsea International 93 written by Society for Underwater Technology (SUT) and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three parts of this volume - Technical Refinement; Technical Innovation; and Project Management and Risk Minimisation - reflect the areas of opportunity for improved cost effective techniques for exploration and production of oil and gas in the North Sea and worldwide. The book is indispensable for engineers and scientists interested in the latest advances in technology and resource management that will reduce costs and continue to enhance the safe exploration of oil and gas resources. This volume comprises a selection of contributions presented at the International Conference Subsea International '93, held 28--29 April 1993 in Aberdeen, U.K.
