Download or read book Advances in Steel Concrete Composite Structures written by J. Y. Richard Liew and published by Research Publishing Service. This book was released on 2012 with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Steel and Steel concrete Composite Structures in Seismic Area Advances in Research and Design The Research Project RP3 of the ReLUIS DPC 2014 2018 Activity Carried Out During Years 2014 2016 written by R. Landolfo and published by . This book was released on 2018 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of Steel Concrete Composite Structures Using High Strength Materials written by J.Y. Richard Liew and published by Woodhead Publishing. This book was released on 2021-08-04 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-strength materials offer alternatives to frequently used materials for high-rise construction. A material of higher strength means a smaller member size is required to resist the design load. However, high-strength concrete is brittle, and high-strength thin steel plates are prone to local buckling. A solution to overcome such problems is to adopt a steel-concrete composite design in which concrete provides lateral restraint to steel plates against local buckling, and steel plates provide confinement to high-strength concrete. Design of Steel-Concrete Composite Structures Using High Strength Materials provides guidance on the design of composite steel-concrete structures using combined high-strength concretes and steels. The book includes a database of over 2,500 test results on composite columns to evaluate design methods, and presents calculations to determine critical parameters affecting the strength and ductility of high-strength composite columns. Finally, the book proposes design methods for axial-moment interaction curves in composite columns. This allows a unified approach to the design of columns with normal- and high-strength steel concrete materials. This book offers civil engineers, structural engineers, and researchers studying the mechanical performance of composite structures in the use of high-strength materials to design and construct advanced tall buildings. Presents the design and construction of composite structures using high-strength concrete and high-strength steel, complementing and extending Eurocode 4 standards Addresses a gap in design codes in the USA, China, Europe and Japan to cover composite structures using high-strength concrete and steel in a comprehensive way Gives insight into the design of concrete-filled steel tubes and concrete-encased steel members Suggests a unified approach to designing columns with normal- and high-strength steel and concrete

Download or read book Composite Steel Structures written by R. Narayanan and published by CRC Press. This book was released on 1987-07-09 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: The constant need for cost-effective structural forms has led to the increasing use of composite construction, and a substantial amount of research effort is currently being spent in developing techniques for combining concrete and steel effectively. Significant economies in this form of construction have been observed, especially in bridges and building floors. Codes of Practice on composite construction are being revised in the UK and in Europe, in the light of the substantial amount of knowledge that has been generated in recent years. An International Conference organised by the Department of Civil and Structural Engineering, University College, Cardiff, UK, with the specific objective of discussing all types of metal structures in an integrated way, provided a forum for the dissemination of new concepts and for reviewing developments; the expectations of the organisers have been amply justified and exceeded by the level of international response to the call for papers. This volume contains 17 papers on composite steel structures, presented at the Conference, many of which were by well-known experts in their respective fields.

Download or read book Composite Steel and Concrete Structures Fundamental Behaviour Second Edition written by D.J. Oehlers and published by Elsevier. This book was released on 2013-10-22 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the analysis and behaviour of composite structural members that are made by joining a steel component to a concrete component. The emphasis of the book is to impart a fundamental understanding of how composite structures work, so engineers develop a feel for the behaviour of the structure, often missing when design is based solely by using codes of practice or by the direct application of prescribed equations. It is not the object to provide quick design procedures for composite members, as these are more than adequately covered by recourse to such aids as safe load tables. The subject should therefore be of interest to practising engineers, particularly if they are involved in the design of non-standard or unusual composite structures for buildings and bridges, or are involved in assessing, upgrading, strengthening or repairing existing composite structures. The fundamentals in composite construction are covered first, followed by more advanced topics that include: behaviour of mechanical and rib shear connectors; local buckling; beams with few shear connectors; moment redistribution and lateral-distortional buckling in continuous beams; longitudinal splitting; composite beams with service ducts; composite profiled beams and profiled slabs; composite columns; and the fatigue design and assessment of composite bridge beams.

Download or read book Composite Construction in Steel and Concrete 9 written by Markus Knobloch and published by John Wiley & Sons. This book was released on 2024-09-03 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite Construction in Steel and Concrete IX The highly successful International Conference series on Composite Construction in Steel and Concrete is a major forum for researchers, practitioners, and engineers to share and discuss their research, practical experience and innovations related to composite constructions in steel and concrete. Composite Construction is a key consideration in the design of buildings and infrastructure. Significant advances in research and development have increased the knowledge of the structural performance of composite structures. Some areas are becoming well understood and implemented in the design practice, codes and standards worldwide, while others like, e.g., application of high-performance materials or dismountable and reusable composite members need further studies; trends that are reflected by the conference papers. The 62 contributions contained in this book cover a wide variety of topics, including composite beams, composite columns, composite decks, joints, shear connections, fire behavior, seismic behavior, fatigue and fracture, codification, composite bridges, innovative hybrid structures, numerical investigations and practical applications. The Papers are peer-reviewed by the Scientific Board and may be adapted based on the outcome of the discussions during the conference. This book therefore summarizes the state-of-the-art in composite construction worldwide, as presented at the 9th International Conference on Composite Construction in Steel and Concrete hosted by the Ruhr-Universität Bochum, University of Stuttgart, RPTU Kaiserslautern-Landau and University of Luxembourg, representing the work of authors from 18 countries.

Download or read book Design of Composite Steel concrete Structures written by Lloyd C. P. Yam and published by . This book was released on 1981 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modern Trends in Research on Steel Aluminium and Composite Structures written by Marian A. Giżejowski and published by Routledge. This book was released on 2021-06-09 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Trends in Research on Steel, Aluminium and Composite Structures includes papers presented at the 14th International Conference on Metal Structures 2021 (ICMS 2021, Poznań, Poland, 16-18 June 2021). The 14th ICMS summarised a few years’ theoretical, numerical and experimental research on steel, aluminium and composite structures, and presented new concepts. This book contains six plenary lectures and all the individual papers presented during the Conference. Seven plenary lectures were presented at the Conference, including "Research developments on glass structures under extreme loads", Parhp3D – The parallel MPI/openMPI implementation of the 3D hp-adaptive FE code", "Design of beam-to-column steel-concrete composite joints: from Eurocodes and beyond", "Stainless steel structures – research, codification and practice", "Testing, modelling and design of bolted joints – effect of size, structural properties, integrity and robustness", "Design of hybrid beam-to-column joints between RHS tubular columns and I-section beams" and "Selected aspects of designing the cold-formed steel structures". The individual contributions delivered by authors covered a wide variety of topics: – Advanced analysis and direct methods of design, – Cold-formed elements and structures, – Composite structures, – Engineering structures, – Joints and connections, – Structural stability and integrity, – Structural steel, metallurgy, durability and behaviour in fire. Modern Trends in Research on Steel, Aluminium and Composite Structures is a useful reference source for academic researchers, graduate students as well as designers and fabricators.

Download or read book Steel Concrete Composite Structures written by R. Narayanan and published by CRC Press. This book was released on 1988-12-31 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a collection of ten extensive review chapters by different authors.

Download or read book Composite Construction in Steel and Concrete VII written by M. A. Bradford and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of High performance Pre engineered Steel Concrete Composite Beams for Sustainable Construction written by Ming-Shan Zhao and published by CRC Press. This book was released on 2024-08-05 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: This accessible and practical shortform book details the properties and advantages of high-performance pre-engineered steel-concrete composite beams (HPCBs) for improving the sustainability of construction techniques. It also explains the analysis methods for testing HPCB systems. The authors describe a new HPCB system that has been developed to reduce the input of raw materials and embodied CO2 commonly associated with heavily loaded and long-spanned industrial buildings (which predominately comprise reinforced concrete) and improve the sustainability of the construction process. They provide several resources throughout to facilitate adoption by professionals. Design equations derived from Eurocode 4 approach for ultimate limit state and serviceability limit state and worked examples are included throughout. The authors discuss the feasibility for both materials and the full-scale beams and CO2 reduction methods, including use of recycled concrete aggregate, ground granulated blast-furnace and silica fume to replace natural coarse aggregates and Ordinary Portland Cement. Guidance for testing HPCBs—including setup, test procedure and data collection and interpretation—is also given. The authors also elaborate on recommendations for finite element analysis for HPCBs. Design examples are appended to illustrate typical current practice using a 12 × 12 m grid floor with live load of 15 kPa. Various considerations for different parameters such as fire resistance are discussed. Finally, the authors present a case study of a recently completed industrial building in Singapore to quantify the benefits of using HPCBs over reinforced concrete and conventional composite construction. Structural engineering professionals, whose work relates to long-span and heavy-loading industrial or commercial buildings, will benefit from the detailed guidance and focus on practical applications provided throughout this book. Post-graduate students of advanced steel and composite structures will also benefit from these descriptions.

Download or read book Elementary Behaviour of Composite Steel and Concrete Structural Members written by Deric J. Oehlers and published by Elsevier. This book was released on 1999-09 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preface; Notation; Introduction; Sizing of Members; Elastic Analysis of Composite Beams; Rigid Plastic Analysis of Simply Supported Beams; Mechanical Shear Connectors; Transfer of Longitudinal Shear Forces; Stocky Columns; Slender Columns; Post-Cracking Dowel Strength; Rigid Plastic Analysis of Continuous Composite Beams; Lateral-Distortional Buckling; General Fatigue Analysis Procedures; Fatigue Analysis of Stud Shear Connectors; Index.

Download or read book Composite Construction in Steel and Concrete IV written by Jerome F. Hajjar and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection contains 85 papers presented at the Composite Construction in Steel and Concrete IV Conference, held in Banff, Alberta, Canada, May 28-June 2, 2000.

Download or read book Composite Steel Structures written by S.L. Lee and published by CRC Press. This book was released on 1991-08-29 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the International Conference on Steel and Aluminium Strucutres, ICSAS 91, Singapore 22-24 May 1991. The complete proceedings are available in three volumes: steel structures, aluminium structures and composite steel structures.The conference was organised by the Department of Civil Engineering, National University of Singapore sequel to the one held in Cardiff, UK in July 1987. It was co-sponsored by the International Association for Bridge and Structural Engineering, the Institution of Civil Engineers, the Institution of Engineers, Singapore, the Institution of Structural Engineers, the Steel Construction Institute, UK, the Singapore Structural Steel Society and the University of Wales College of Cardiff. The conference provided a forum to discuss recent advances and trends in the analysis, design and construction of all types of metal structures.This volume contains 18 of the papers presented at the conference. Invited Lectures on the state-of-the-art surveys have been provided by well-known experts in their respective fields. The coverage is extensive and topics include Bridges, Building Floor Systems, Concrete Filled Hollow Sections, Aluminium-concrete Systems, Composite Members to Earthquake Loading, etc.

Download or read book Analysis and Design of Steel and Composite Structures written by Qing Quan Liang and published by CRC Press. This book was released on 2018-10-08 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel and composite steel–concrete structures are widely used in modern bridges, buildings, sport stadia, towers, and offshore structures. Analysis and Design of Steel and Composite Structures offers a comprehensive introduction to the analysis and design of both steel and composite structures. It describes the fundamental behavior of steel and composite members and structures, as well as the current design criteria and procedures given in Australian standards AS/NZS 1170, AS 4100, AS 2327.1, Eurocode 4, and AISC-LRFD specifications. Featuring numerous step-by-step examples that clearly illustrate the detailed analysis and design of steel and composite members and connections, this practical and easy-to-understand text: Covers plates, members, connections, beams, frames, slabs, columns, and beam-columns Considers bending, axial load, compression, tension, and design for strength and serviceability Incorporates the author’s latest research on composite members Analysis and Design of Steel and Composite Structures is an essential course textbook on steel and composite structures for undergraduate and graduate students of structural and civil engineering, and an indispensable resource for practising structural and civil engineers and academic researchers. It provides a sound understanding of the behavior of structural members and systems.

Download or read book Recent Progress in Steel and Composite Structures written by Marian A. Gizejowski and published by CRC Press. This book was released on 2016-05-03 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent Progress in Steel and Composite Structures includes papers presented at the XIIIth International Conference on Metal Structures (ICMS 2016, Zielona Gra, Poland, 15-17 June 2016). The contributions focus on the progress made in theoretical, numerical and experimental research, with special attention given to new concepts and algorithmic proc

Download or read book Finite Element Analysis and Design of Steel and Steel Concrete Composite Bridges written by Ehab Ellobody and published by Butterworth-Heinemann. This book was released on 2014-05-30 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, bridge engineers and researchers are increasingly turning to the finite element method for the design of Steel and Steel-Concrete Composite Bridges. However, the complexity of the method has made the transition slow. Based on twenty years of experience, Finite Element Analysis and Design of Steel and Steel-Concrete Composite Bridges provides structural engineers and researchers with detailed modeling techniques for creating robust design models. The book’s seven chapters begin with an overview of the various forms of modern steel and steel–concrete composite bridges as well as current design codes. This is followed by self-contained chapters concerning: nonlinear material behavior of the bridge components, applied loads and stability of steel and steel–concrete composite bridges, and design of steel and steel–concrete composite bridge components. Constitutive models for construction materials including material non-linearity and geometric non-linearity The mechanical approach including problem setup, strain energy, external energy and potential energy), mathematics behind the method Commonly available finite elements codes for the design of steel bridges Explains how the design information from Finite Element Analysis is incorporated into Building information models to obtain quantity information, cost analysis