Download or read book Advances in Powder Metallurgy Particulate Materials written by and published by . This book was released on 2002 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in powder metallurgy written by J.J. Dunkley and published by Elsevier Inc. Chapters. This book was released on 2013-08-31 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: This chapter is a review of recent developments (since 2000) and aims to provide the reader with an introduction to a range of atomisation techniques developed in the last century, in order to understand the latest developments. The basic principles of gas, water and centrifugal atomisation are covered, followed by discussion of problems and advances in each area. The chapter will not attempt to cover all the classical techniques in detail. A previous review or major book can be consulted for this.
Download or read book Advances in Powder Metallurgy written by Isaac Chang and published by Elsevier. This book was released on 2013-08-31 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder metallurgy (PM) is a popular metal forming technology used to produce dense and precision components. Different powder and component forming routes can be used to create an end product with specific properties for a particular application or industry. Advances in powder metallurgy explores a range of materials and techniques used for powder metallurgy and the use of this technology across a variety of application areas. Part one discusses the forming and shaping of metal powders and includes chapters on atomisation techniques, electrolysis and plasma synthesis of metallic nanopowders. Part two goes on to highlight specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys. Part three reviews the manufacture and densification of PM components and explores joining techniques, process optimisation in powder component manufacturing and non-destructive evaluation of PM parts. Finally, part four focusses on the applications of PM in the automotive industry and the use of PM in the production of cutting tools and biomaterials. Advances in powder metallurgy is a standard reference for structural engineers and component manufacturers in the metal forming industry, professionals working in industries that use PM components and academics with a research interest in the field. Discusses the forming and shaping of metal powders and includes chapters on atomisation techniques Highlights specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys Reviews the manufacture and densification of PM components and explores joining techniques
Download or read book Advances in powder metallurgy written by A. Simchi and published by Elsevier Inc. Chapters. This book was released on 2013-08-31 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Warm compaction is a cost saving and effective method for obtaining high performance powder metallurgy (PM) parts. This chapter presents the principles of warm compaction and technical aspects of the process. The green and sintered properties of warm compacted parts are discussed and compared with conventionally (cold) produced compacts. The applications of the process for ferrous and non-ferrous PM parts are presented and future trends are outlined.
Download or read book Advances in Powder Metallurgy Particulate Materials 2006 written by and published by . This book was released on 2006 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ferrous Powder Metallurgy written by Andrej Šalak and published by Cambridge International Science Publishing. This book was released on 1995 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of the position of ferrous powder metallurgy, the author deals with the theoretical fundamentals and technical and technological aspects of the current state of knowledge in ferrous powder metallurgy so that special attention may be given to all factors influencing parts and materials with the required properties, form and dimensions, stressing their higher economic efficiency. The book also shows the extensive possibilities for further development of ferrous powder metallurgy and should therefore contribute to increasing the level of general and detailed knowledge of experts working in this area and should help in transition from fabrication of parts by conventional methods with all typical economic and ecological shortcomings to fabrication by powder metallurgy methods.
Download or read book Advances in powder metallurgy written by H. Danninger and published by Elsevier Inc. Chapters. This book was released on 2013-08-31 with total page 71 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ferrous powder metallurgy (PM) makes up the majority of powder metallurgy products with regard to tonnage. Improving performance is the main trend for pressed and sintered parts, in particular the introduction of cost-effective alloy elements such as Cr and Mn. Furthermore, much can be gained in ferrous PM by elaborate secondary operations. In metal injection moulding (MIM) products, there is a clear trend towards increasingly complex shapes and microsized parts. PM tool steels offer a much finer and fully isotropic microstructure compared to their wrought counterparts and the carbide content may be much higher, resulting in excellent application properties.
Download or read book Advances in Powder Metallurgy Particulate Materials 2003 written by and published by . This book was released on 2003 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sintering of Advanced Materials written by Zhigang Zak Fang and published by Elsevier. This book was released on 2010-09-27 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sintering is a method for manufacturing components from ceramic or metal powders by heating the powder until the particles adhere to form the component required. The resulting products are characterised by an enhanced density and strength, and are used in a wide range of industries. Sintering of advanced materials: fundamentals and processes reviews important developments in this technology and its applicationsPart one discusses the fundamentals of sintering with chapters on topics such as the thermodynamics of sintering, kinetics and mechanisms of densification, the kinetics of microstructural change and liquid phase sintering. Part two reviews advanced sintering processes including atmospheric sintering, vacuum sintering, microwave sintering, field/current assisted sintering and photonic sintering. Finally, Part three covers sintering of aluminium, titanium and their alloys, refractory metals, ultrahard materials, thin films, ultrafine and nanosized particles for advanced materials.With its distinguished editor and international team of contributors, Sintering of advanced materials: fundamentals and processes reviews the latest advances in sintering and is a standard reference for researchers and engineers involved in the processing of ceramics, powder metallurgy, net-shape manufacturing and those using advanced materials in such sectors as electronics, automotive and aerospace engineering. - Explores the thermodynamics of sintering including sinter bonding and densification - Chapters review a variety of sintering methods including atmosphere, vacuum, liquid phase and microwave sintering - Discusses sintering of a variety of materials featuring refractory metals, super hard materials and functionally graded materials
Download or read book Powder Metallurgy Stainless Steels written by Erhard Klar and published by ASM International. This book was released on 2007-01-01 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Metal Injection Molding written by Donald F. Heaney and published by Woodhead Publishing. This book was released on 2019-05-21 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal injection molding combines the most useful characteristics of powder metallurgy and plastic injection molding to facilitate the production of small, complex-shaped metal components with outstanding mechanical properties. Handbook of Metal Injection Molding, Second Edition provides an authoritative guide to this important technology and its applications. Building upon the success of the first edition, this new edition includes the latest developments in the field and expands upon specific processing technologies. Part one discusses the fundamentals of the metal injection molding process with chapters on topics such as component design, important powder characteristics, compound manufacture, tooling design, molding optimization, debinding, and sintering. Part two provides a detailed review of quality issues, including feedstock characterisation, modeling and simulation, methods to qualify a MIM process, common defects and carbon content control. Special metal injection molding processes are the focus of part three, which provides comprehensive coverage of micro components, two material/two color structures, and porous metal techniques. Finally, part four explores metal injection molding of particular materials, and has been expanded to include super alloys and precious metals. With its distinguished editor and expert team of international contributors, the Handbook of Metal Injection Molding is an essential guide for all those involved in the high-volume manufacture of small precision parts, across a wide range of high-tech industries such as microelectronics, biomedical and aerospace engineering. - Provides an authoritative guide to metal injection molding and its applications - Discusses the fundamentals of the metal injection molding processes and covers topics such as component design, important powder characteristics, compound manufacture, tooling design, molding optimization, debinding and sintering - Comprehensively examines quality issues, such as feedstock characterization, modeling and simulation, common defects and carbon content control
Download or read book Metallic Powders for Additive Manufacturing written by Enrique J. Lavernia and published by John Wiley & Sons. This book was released on 2024-03-06 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallic Powders for Additive Manufacturing Overview of successful pathways for producing metal powders for additive manufacturing of high-performance metallic parts and components with tailored properties Metallic Powders for Additive Manufacturing introduces the readers to the science and technology of atomized metal powders beyond empirical knowledge and the fundamental relationships among the chemistry, microstructure, and morphology of atomized metallic powders and their behavior during additive manufacturing. The text sets a foundation of the underlying science that controls the formation and microstructure of atomized metallic droplets, including the relations among the properties of metallic powders, their performance during the manufacturing processes, and the resulting products. Other topics covered include the influence of powder on defect formation, residual stress, mechanical behavior, and physical properties. The concluding two chapters encompass considerations of broader societal implications and overarching themes, including the exploration of alternative feedstock materials, economic analysis, and sustainability assessment. These chapters offer valuable perspectives on the prospective trajectory of the field. Written by a team of experienced and highly qualified professors and academics, Metallic Powders for Additive Manufacturing includes information on: Atomization techniques such as Vacuum Induction Gas Atomization (VIGA), Electrode Induction Melting Gas Atomization (EIMGA), and Plasma Rotating Electrode Process (PREP) Atomization science and technology, covering control of atomization parameters, powder size distribution, effect of processing variables, and theoretical models of atomization Heat transfer and solidification of droplets, covering nucleation, microstructure development, and important thermal and solidification conditions during atomization Atomization of Al, Fe, Ni, Co, Ti, and high entropy alloys, as well as composite powders for additive manufacturing, and guidelines for atomization equipment and powder handling Fundamental processing principles in a variety of metal additive manufacturing processes Powder characteristics and requirements for different additive manufacturing processes Effect of powder chemistry and physical characteristics on additive manufacturing processes, and the microstructure and properties of the built parts Evaluation of alternative feedstock sources for metal additive manufacturing, beyond gas atomized powder Economic and sustainability perspectives on powder production and additive manufacturing Metallic Powders for Additive Manufacturing is an excellent combination of rigorous fundamentals and a practice-oriented and forward-looking resource on the subject for materials scientists and practicing engineers seeking to understand, optimize, and further develop the field of powder production and additive manufacturing.
Download or read book Advanced Powder Technology IX written by Francisco Ambrozio Filho and published by Trans Tech Publications Ltd. This book was released on 2014-12-31 with total page 667 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the Ninth International Latin American Conference on Powder Technology (PTECH 2013), October 27 – 29, 2013, São Paulo, Brazil
Download or read book Metal Sprays and Spray Deposition written by Hani Henein and published by Springer. This book was released on 2017-07-22 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes and illustrates metal spray and spray deposition from the process engineering, metallurgical, and application viewpoints. The authors include step-by-step fundamental information for the metal spray process and detail current engineering developments and applications. They offer industry insight on non-equilibrium solidification processes for yielding stable metal structures and properties.
Download or read book Micromanufacturing Engineering and Technology written by Yi Qin and published by William Andrew. This book was released on 2010-07-02 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromanufacturing Engineering and Technology presents applicable knowledge of technology, equipment and applications, and the core economic issues of micromanufacturing for anyone with a basic understanding of manufacturing, material, or product engineering. It explains micro-engineering issues (design, systems, materials, market and industrial development), technologies, facilities, organization, competitiveness, and innovation with an analysis of future potential. The machining, forming, and joining of miniature / micro-products are all covered in depth, covering: grinding/milling, laser applications, and photo chemical etching; embossing (hot & UV), injection molding and forming (bulk, sheet, hydro, laser); mechanical assembly, laser joining, soldering, and packaging. - Presents case studies, material and design considerations, working principles, process configurations, and information on tools, equipment, parameters and control - Explains the many facets of recently emerging additive / hybrid technologies and systems, incl: photo-electric-forming, liga, surface treatment, and thin film fabrication - Outlines system engineering issues pertaining to handling, metrology, testing, integration and software - Explains widely used micro parts in bio / medical industry, information technology and automotive engineering - Covers technologies in high demand, such as: micro-mechanical-cutting, lasermachining, micro-forming, micro-EDM, micro-joining, photo-chemical-etching, photo-electro-forming, and micro-packaging
Download or read book Encyclopedia of Iron Steel and Their Alloys Online Version written by George E. Totten and published by CRC Press. This book was released on 2016-01-06 with total page 3918 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of many important works featured in CRC Press’ Metals and Alloys Encyclopedia Collection, the Encyclopedia of Iron, Steel, and Their Alloys covers all the fundamental, theoretical, and application-related aspects of the metallurgical science, engineering, and technology of iron, steel, and their alloys. This Five-Volume Set addresses topics such as extractive metallurgy, powder metallurgy and processing, physical metallurgy, production engineering, corrosion engineering, thermal processing, metalworking, welding, iron- and steelmaking, heat treating, rolling, casting, hot and cold forming, surface finishing and coating, crystallography, metallography, computational metallurgy, metal-matrix composites, intermetallics, nano- and micro-structured metals and alloys, nano- and micro-alloying effects, special steels, and mining. A valuable reference for materials scientists and engineers, chemists, manufacturers, miners, researchers, and students, this must-have encyclopedia: Provides extensive coverage of properties and recommended practices Includes a wealth of helpful charts, nomograms, and figures Contains cross referencing for quick and easy search Each entry is written by a subject-matter expert and reviewed by an international panel of renowned researchers from academia, government, and industry. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]
Download or read book Powder Metallurgy Technology written by G. S. Upadhyaya and published by Cambridge Int Science Publishing. This book was released on 1997 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Contents1 INTRODUCTION; 2 METAL POWDER PRODUCTION; 3 METAL POWDER CHARACTERISTICS; 4 METAL POWDER TRE-AMENT; 5 METAL POWDER COMPACT-ION; 6 SINTERING; 7 HOT CONSOLIDATION; 8 SECONDARY TREATMENT; 9 POWDER INJECTION MOULDING; 10 QUALITY CONTROL OF POWDER METALLURGY MATERIALS.
