Download or read book Advances in Polymer Blends and Alloys written by Donald E. Witenhafer and published by Technomic Publishing Company. This book was released on 1988-12-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Polymer Blends and Alloys Technology Volume II written by Kier Finlayson and published by Routledge. This book was released on 2018-12-13 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: From Reports in Volume 5: "Recently polymer blends have emerged as one of the most important areas of research activity in the field of polymer science and technology. Because of their satisfactory performance in meeting specific needs of the polymer industry, they have drawn considerable attention in replacing not only many conventional materials, but also some of the polymers that are in vogue. By suitably varying the blend compositions and manipulating the processing conditions, tailor-made products with a unique set of end use properties can be achieved at a much lower cost and within a shorter time than would have been necessary for the development of a new polymer. The usefulness of such blends increases with the increasing range of applications of this type of materials." (Chapter 4) "New and growing demands on polymeric materials cannot be satisfied in future by an assortment extension of basic polymers. Although the introduction of new major-use basic polymer is possible, it seems unlikely in view of current projected economic and technical considerations. On the other hand, new products based on the modification of existing polymers have and will continue to be fruitful areas for both scientific and commercial developments. The driving forces for these developments are: 1. Improved performance, 2. Reduced cost, 3. Present, pending and future legislation dealing with health and environmental issues." (Chapter 11)
Download or read book Advances in Polymer Blends and Alloys Technology written by Kier Finlayson and published by CRC Press. This book was released on 1994-11-22 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: From Reports in Volume 5 "Recently polymer blends have emerged as one of the most important areas of research activity in the field of polymer science and technology. Because of their satisfactory performance in meeting specific needs of the polymer industry, they have drawn considerable attention in replacing not only many conventional materials, but also some of the polymers that are in vogue. By suitably varying the blend compositions and manipulating the processing conditions, tailor-made products with a unique set of end use properties can be achieved at a much lower cost and within a shorter time than would have been necessary for the development of a new polymer. The usefulness of such blends increases with the increasing range of applications of this type of materials." (Chapter 4) "New and growing demands on polymeric materials cannot be satisfied in future by an assortment extension of basic polymers. Although the introduction of new major-use basic polymer is possible, it seems unlikely in view of current projected economic and technical considerations. On the other hand, new products based on the modification of existing polymers have and will continue to be fruitful areas for both scientific and commercial developments. The driving forces for these developments are: 1. Improved performance, 2. Reduced cost, 3. Present, pending and future legislation dealing with health and environmental issues." (Chapter 11)
Download or read book Advances in Polymer Blends and Alloys Technology written by Kier Finlayson and published by CRC Press. This book was released on 1989-10-10 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study shows the impact resistance of polypropylene toughened by an ethylene-propylene elastomer. The objective was to modify polystyrene with linear thermoplastic elastomer of styrene-isoprene-styrene triblock copolymer and polystyrene with ethylene-propylene rubber by weight by melt blending.
Download or read book Advances in Polymer Blends and Alloys Technology Seminar Notes written by Donald E. Wittenhafer and published by Technomic Publishing Company. This book was released on 1993-01-01 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Polymer Blends and Alloys Technology written by Melvyn A. Kohudic and published by CRC Press. This book was released on 1993-04-01 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Polymer Blends and Alloys Technology Volume III written by Melvyn A. Kohudic and published by CRC Press. This book was released on 1991-04-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Alloys II written by Daniel Klempner and published by Springer. This book was released on 1980-03 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The term "alloy" as pertaining to polymers has become an increasingly popular description of composites of polymers, parti cularly since the publication of the first volume in this series in 1977. Polymer alloy refers to that class of macromolecular materials which, in general, consists of combinations of chemically different polymers. The polymers involved in these combinations may be hetero geneous (multiphase) or homogeneous (single phase). They may be linked together with covalent bonds between the component polymers (block copolymers, graft copolymers), linked topologically with no covalent bonds (interpenetrating polymer networks), or not linked at all except physically (polyblends). In addition, they may be linear (thermoplastic), crosslinked (thermosetting), crystalline, or amorphous, although the latter is more common. To the immense satisfaction - but not surprise - of the editors, there has been no decrease in the research and development of polymer alloys since the publication of the first volume, as evidenced by numerous publications, conferences and symposia. Continued advances in polymer technology caused by the design of new types of polymer alloys have also been noted. This technolog ical interest stems from the fact that these materials very often exhibit a synergism in properties achievable only by the formation of polymer alloys. The classic examples, of course, are the high impact plastics, which are either polyblends, block, or graft co polymers composed of a rubbery and a glassy polymer. Interpene trating polymer networks (IPN's) of such polymers also exhibit the same, or even greater, synergism.
Download or read book Polymer Blends and Alloys written by George P. Simon and published by Routledge. This book was released on 2019-07-16 with total page 865 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distinguishing among blends, alloys and other types of combinations, clarifying terminology and presenting data on new processes and materials, this work present up-to-date and effective compounding techniques for polymers. It offers extensive analyses on the challenging questions that surround miscibility, compatibility, dynamic processing, interaction/phase behaviour, and computer simulations for predicting behaviours of polymer mixture and interaction.
Download or read book Advances in Polymer Blends and Alloys Technology Volume II written by Kier Finlayson and published by Routledge. This book was released on 2018-12-13 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: From Reports in Volume 5: "Recently polymer blends have emerged as one of the most important areas of research activity in the field of polymer science and technology. Because of their satisfactory performance in meeting specific needs of the polymer industry, they have drawn considerable attention in replacing not only many conventional materials, but also some of the polymers that are in vogue. By suitably varying the blend compositions and manipulating the processing conditions, tailor-made products with a unique set of end use properties can be achieved at a much lower cost and within a shorter time than would have been necessary for the development of a new polymer. The usefulness of such blends increases with the increasing range of applications of this type of materials." (Chapter 4) "New and growing demands on polymeric materials cannot be satisfied in future by an assortment extension of basic polymers. Although the introduction of new major-use basic polymer is possible, it seems unlikely in view of current projected economic and technical considerations. On the other hand, new products based on the modification of existing polymers have and will continue to be fruitful areas for both scientific and commercial developments. The driving forces for these developments are: 1. Improved performance, 2. Reduced cost, 3. Present, pending and future legislation dealing with health and environmental issues." (Chapter 11)
Download or read book Polymer Alloys III written by Daniel Klempner and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: On this, the dawning of a new age in high technology, man is seeking answers to increasingly complex problems. We are routinely launching reusable vehicles into space, designing and building computers with seemingly limitless powers, and developing sophisticated communications systems using laser technology, fiber optics, holography, etc., all of which require new and advanced materials. Polymer alloys continue to provide new solutions to the materials problems, and remain an area of ever increasing research. Polymer alloys are mu1ticomponent macromolecular systems. The components may be all on the same chain (as in block co polymers), on side chains (as in graft copolymers), or in different molecules (as in po1yb1ends and interpenetrating polymer networks). The variety of morphologies possible and the synergistic effects on ultimate properties continue to stimulate research on new polymer alloys. More and more studies on synthesis of new alloys, the kinetics and mecha nisms of their formation, and their characterization, are taking place, as well as studies on their processing and applications. This book presents the proceedings of the Symposium on Polymer Alloys, sponsored by the American Chemical Society's Division of OrganiC Coatings and Plastics Chemistry held at the 182nd meeting of the American Chemical Society in New York, in August, 1981. The most recent efforts of scientists and engineers from allover the world in this increasingly important field are presented in the following pages.
Download or read book Polymer Blends Handbook written by L. A. Utracki and published by . This book was released on 2014-01-31 with total page 1800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an international group of highly respected contributors, this fundamental reference work covers all aspects of polymer blends: science, engineering, technology and applications.
Download or read book Polymer Blends and Alloys written by George P. Simon and published by Routledge. This book was released on 2019-07-16 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distinguishing among blends, alloys and other types of combinations, clarifying terminology and presenting data on new processes and materials, this work present up-to-date and effective compounding techniques for polymers. It offers extensive analyses on the challenging questions that surround miscibility, compatibility, dynamic processing, interaction/phase behaviour, and computer simulations for predicting behaviours of polymer mixture and interaction.
Download or read book Polymer Blends written by D.R. Paul and published by Elsevier. This book was released on 2012-12-02 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Blends, Volume 2 aims to show the importance of mixed polymer systems as a major branch of macromolecular science and provides a broad background of principles and practices in this field. Starting from where the first volume left off, the book covers topics in the area of polymer blends in Chapters 11-23. Areas of coverage include interpenetrating polymer networks; interfacial agents for polymer blends; rubber modification of plastics; fracture phenomena; coextruded multilayer polymer films and sheets; polymeric plasticizers; and polyolefin blends and their applications. The book is recommended for scientists, technologists, and engineers in the academe, research, and related industry, especially those who wish to be updated with its advances as a science.
Download or read book Polymer Blends and Composites written by Muralisrinivasan Natamai Subramanian and published by John Wiley & Sons. This book was released on 2017-03-23 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because it is critically important to manufacture quality products, a reasonable balance must be drawn between control requirements and parameters for improved processing method with respect to plastics additives. An important contribution to the commercial polymer industry, Polymer Blends and Composites is one of the first books to combine plastics additives, testing, and quality control. The book is a comprehensive treatise on properties that provides detailed guidelines for selecting and using blends and composites for applications. A valuable resource for operators, processors, engineers, chemists, the book serves to stimulate those already active in natural polymer composites.
Download or read book Characterization of Polymer Blends written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2015-02-09 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling the gap for a reference dedicated to the characterization of polymer blends and their micro and nano morphologies, this book provides comprehensive, systematic coverage in a one-stop, two-volume resource for all those working in the field. Leading researchers from industry and academia, as well as from government and private research institutions around the world summarize recent technical advances in chapters devoted to their individual contributions. In so doing, they examine a wide range of modern characterization techniques, from microscopy and spectroscopy to diffraction, thermal analysis, rheology, mechanical measurements and chromatography. These methods are compared with each other to assist in determining the best solution for both fundamental and applied problems, paying attention to the characterization of nanoscale miscibility and interfaces, both in blends involving copolymers and in immiscible blends. The thermodynamics, miscibility, phase separation, morphology and interfaces in polymer blends are also discussed in light of new insights involving the nanoscopic scale. Finally, the authors detail the processing-morphology-property relationships of polymer blends, as well as the influence of processing on the generation of micro and nano morphologies, and the dependence of these morphologies on the properties of blends. Hot topics such as compatibilization through nanoparticles, miscibility of new biopolymers and nanoscale investigations of interfaces in blends are also addressed. With its application-oriented approach, handpicked selection of topics and expert contributors, this is an outstanding survey for anyone involved in the field of polymer blends for advanced technologies.
Download or read book Polymer Blends and Composites written by John A. Manson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for writing a monograph on polymer blends and composites became apparent during presentation of material on this subject to our advanced polymers class. Although the flood of important research in this area in the past decade has resulted in many symposia, edited collections of papers, reviews, contributions to scientific journals, and patents, apparently no organized presentation in book form has been forthcoming. In a closely connected way, another strong impetus for writing this monograph arose out of our research programs in the Materials Research Center at Lehigh University. As part of this effort, we had naturally compiled hundreds of references and become acquainted with many leaders in the field of blend and composite research. Perhaps the most important concept stressed over and over again is that engineering materials are useful because of their complexity, not in spite of it. Blends and composites are toughened because many modes of resistance to failure are available. Although such multimechanism processes are diffi cult to describe with a unified theory. we have presented available develop ments in juxtaposition with the experimental portions. The arguments somewhat resemble the classical discussion of resonance in organic chemistry, where molecular structures increase in stability as more electronic configura tions become available.
