Download or read book Advances in Estimation Navigation and Spacecraft Control written by Daniel Choukroun and published by Springer. This book was released on 2015-01-02 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers of the Itzhack Y. Bar-Itzhack Memorial Sympo- sium on Estimation, Navigation, and Spacecraft Control. Itzhack Y. Bar-Itzhack, professor Emeritus of Aerospace Engineering at the Technion – Israel Institute of Technology, was a prominent and world-renowned member of the applied estimation, navigation, and spacecraft attitude determination communities. He touched the lives of many. He had a love for life, an incredible sense of humor, and wisdom that he shared freely with everyone he met. To honor Professor Bar-Itzhack's memory, as well as his numerous seminal professional achievements, an international symposium was held in Haifa, Israel, on October 14–17, 2012, under the auspices of the Faculty of Aerospace Engineering at the Technion and the Israeli Association for Automatic Control. The book contains 27 selected, revised, and edited contributed chapters written by eminent international experts. The book is organized in three parts: (1) Estimation, (2) Navigation and (3) Spacecraft Guidance, Navigation and Control. The volume was prepared as a reference for research scientists and practicing engineers from academy and industry in the fields of estimation, navigation, and spacecraft GN&C.

Download or read book Advances in Aerospace Guidance Navigation and Control written by Joël Bordeneuve-Guibé and published by Springer. This book was released on 2015-04-04 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two first CEAS (Council of European Aerospace Societies) Specialist Conferences on Guidance, Navigation and Control (CEAS EuroGNC) were held in Munich, Germany in 2011 and in Delft, The Netherlands in 2013. ONERA The French Aerospace Lab, ISAE (Institut Supérieur de l’Aéronautique et de l’Espace) and ENAC (Ecole Nationale de l’Aviation Civile) accepted the challenge of jointly organizing the 3rd edition. The conference aims at promoting new advances in aerospace GNC theory and technologies for enhancing safety, survivability, efficiency, performance, autonomy and intelligence of aerospace systems. It represents a unique forum for communication and information exchange between specialists in the fields of GNC systems design and operation, including air traffic management. This book contains the forty best papers and gives an interesting snapshot of the latest advances over the following topics: l Control theory, analysis, and design l Novel navigation, estimation, and tracking methods l Aircraft, spacecraft, missile and UAV guidance, navigation, and control l Flight testing and experimental results l Intelligent control in aerospace applications l Aerospace robotics and unmanned/autonomous systems l Sensor systems for guidance, navigation and control l Guidance, navigation, and control concepts in air traffic control systems For the 3rd CEAS Specialist Conference on Guidance, Navigation and Control the International Program Committee conducted a formal review process. Each paper was reviewed in compliance with standard journal practice by at least two independent and anonymous reviewers. The papers published in this book were selected from the conference proceedings based on the results and recommendations from the reviewers.

Download or read book Principles of Spacecraft Control written by Walter Fichter and published by Springer Nature. This book was released on 2022-10-11 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this textbook is to provide the mathematical models and algorithms needed to develop a thorough understanding of all control system functions of a rigid body spacecraft. Relatively simple, but practically applicable algorithms are presented rather than recent advances. We try to avoid detailed and specialized issues that are of less importance for the fundamental understanding, such as detailed environment models, etc. Furthermore, control problems that can be cast in standard formulations and solved with existing methods are not treated here. Instead, we intend to provide an understanding of the principles, put them in an engineering context, and try to give all explanations as concise as possible. Besides conventional three-axis attitude control systems, the following topics are treated in this book:• Control of agile rotation maneuvers using control moment gyros • Precise pointing control with error classes for pointing instruments • Control systems with accelerometers and free-flying test masses, which provide low-disturbance or disturbance-free environments We believe that these topics are of considerable relevance for the design of future spacecraft control systems, especially in the field of science and Earth observation missions.

Download or read book Fault Tolerant Attitude Estimation for Small Satellites written by Chingiz Hajiyev and published by CRC Press. This book was released on 2020-12-22 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small satellites use commercial off-the-shelf sensors and actuators for attitude determination and control (ADC) to reduce the cost. These sensors and actuators are usually not as robust as the available, more expensive, space-proven equipment. As a result, the ADC system of small satellites is more vulnerable to any fault compared to a system for larger competitors. This book aims to present useful solutions for fault tolerance in ADC systems of small satellites. The contents of the book can be divided into two categories: fault tolerant attitude filtering algorithms for small satellites and sensor calibration methods to compensate the sensor errors. MATLAB® will be used to demonstrate simulations. Presents fault tolerant attitude estimation algorithms for small satellites with an emphasis on algorithms’ practicability and applicability Incorporates fundamental knowledge about the attitude determination methods at large Discusses comprehensive information about attitude sensors for small satellites Reviews calibration algorithms for small satellite magnetometers with simulated examples Supports theory with MATLAB simulation results which can be easily understood by individuals without a comprehensive background in this field Covers up-to-date discussions for small satellite attitude systems design Dr. Chingiz Hajiyev is a professor at the Faculty of Aeronautics and Astronautics, Istanbul Technical University (Istanbul, Turkey). Dr. Halil Ersin Soken is an assistant professor at the Aerospace Engineering Department, Middle East Technical University (Ankara, Turkey).

Download or read book Advances in Aerospace Guidance Navigation and Control written by Florian Holzapfel and published by Springer Science & Business Media. This book was released on 2011-03-15 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last few decades, both the aeronautics and space disciplines have greatly influenced advances in controls, sensors, data fusion and navigation. Many of those achievements that made the word “aerospace” synonymous with “high–tech” were enabled by innovations in guidance, navigation and control. Europe has seen a strong trans-national consolidation process in aerospace over the last few decades. Most of the visible products, like commercial aircraft, fighters, helicopters, satellites, launchers or missiles, are not made by a single country – they are the fruits of cooperation. No European country by itself hosts a specialized guidance, navigation and controls community large enough to cover the whole spectrum of disciplines. However, on a European scale, mutual exchange of ideas, concepts and solutions is enriching for all. The 1st CEAS Specialist Conference on Guidance, Navigation and Control is an attempt to bring this community together. This book is a selection of papers presented at the conference. All submitted papers have gone through a formal review process in compliance with good journal practices. The best papers have been recommended by the reviewers to be published in this book.

Download or read book Developments in Model Based Optimization and Control written by Sorin Olaru and published by Springer. This book was released on 2015-12-23 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with optimization methods as tools for decision making and control in the presence of model uncertainty. It is oriented to the use of these tools in engineering, specifically in automatic control design with all its components: analysis of dynamical systems, identification problems, and feedback control design. Developments in Model-Based Optimization and Control takes advantage of optimization-based formulations for such classical feedback design objectives as stability, performance and feasibility, afforded by the established body of results and methodologies constituting optimal control theory. It makes particular use of the popular formulation known as predictive control or receding-horizon optimization. The individual contributions in this volume are wide-ranging in subject matter but coordinated within a five-part structure covering material on: · complexity and structure in model predictive control (MPC); · collaborative MPC; · distributed MPC; · optimization-based analysis and design; and · applications to bioprocesses, multivehicle systems or energy management. The various contributions cover a subject spectrum including inverse optimality and more modern decentralized and cooperative formulations of receding-horizon optimal control. Readers will find fourteen chapters dedicated to optimization-based tools for robustness analysis, and decision-making in relation to feedback mechanisms—fault detection, for example—and three chapters putting forward applications where the model-based optimization brings a novel perspective. Developments in Model-Based Optimization and Control is a selection of contributions expanded and updated from the Optimisation-based Control and Estimation workshops held in November 2013 and November 2014. It forms a useful resource for academic researchers and graduate students interested in the state of the art in predictive control. Control engineers working in model-based optimization and control, particularly in its bioprocess applications will also find this collection instructive.

Download or read book Advances in Aerospace Guidance Navigation and Control written by Qiping Chu and published by Springer Science & Business Media. This book was released on 2013-11-18 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the successful 1st CEAS (Council of European Aerospace Societies) Specialist Conference on Guidance, Navigation and Control (CEAS EuroGNC) held in Munich, Germany in 2011, Delft University of Technology happily accepted the invitation of organizing the 2nd CEAS EuroGNC in Delft, The Netherlands in 2013. The goal of the conference is to promote new advances in aerospace GNC theory and technologies for enhancing safety, survivability, efficiency, performance, autonomy and intelligence of aerospace systems using on-board sensing, computing and systems. A great push for new developments in GNC are the ever higher safety and sustainability requirements in aviation. Impressive progress was made in new research fields such as sensor and actuator fault detection and diagnosis, reconfigurable and fault tolerant flight control, online safe flight envelop prediction and protection, online global aerodynamic model identification, online global optimization and flight upset recovery. All of these challenges depend on new online solutions from on-board computing systems. Scientists and engineers in GNC have been developing model based, sensor based as well as knowledge based approaches aiming for highly robust, adaptive, nonlinear, intelligent and autonomous GNC systems. Although the papers presented at the conference and selected in this book could not possibly cover all of the present challenges in the GNC field, many of them have indeed been addressed and a wealth of new ideas, solutions and results were proposed and presented. For the 2nd CEAS Specialist Conference on Guidance, Navigation and Control the International Program Committee conducted a formal review process. Each paper was reviewed in compliance with good journal practice by at least two independent and anonymous reviewers. The papers published in this book were selected from the conference proceedings based on the results and recommendations from the reviewers.

Download or read book Spacecraft Dynamics and Control written by Yongchun Xie and published by Springer Nature. This book was released on 2021-07-13 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents up-to-date concepts and design methods relating to space dynamics and control, including spacecraft attitude control, orbit control, and guidance, navigation, and control (GNC), summarizing the research advances in control theory and methods and engineering practice from Beijing Institute of Control Engineering over the years. The control schemes and systems based on these achievements have been successfully applied to remote sensing satellites, communication satellites, navigation satellites, new technology test satellites, Shenzhou manned spacecraft, Tianzhou freight spacecraft, Tiangong 1/2 space laboratories, Chang'e lunar explorers, and many other missions. Further, the research serves as a guide for follow-up engineering developments in manned lunar engineering, deep space exploration, and on-orbit service missions.

Download or read book Guidance Navigation and Control for Spacecraft Rendezvous and Docking Theory and Methods written by Yongchun Xie and published by Springer Nature. This book was released on 2021-02-16 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the theory and design methods for guidance, navigation, and control (GNC) in the context of spacecraft rendezvous and docking (RVD). The position and attitude dynamics and kinematics equations for RVD are presented systematically in accordance with several different coordinate systems, including elliptical orbital frame, and recommendations are supplied on which of these equations to use in different phases of RVD. The book subsequently explains the basic principles and relative navigation algorithms of RVD sensors such as GNSS, radar, and camera-type RVD sensors. It also provides guidance algorithms and schemes for different phases of RVD, including the latest research advances in rapid RVD. In turn, the book presents a detailed introduction to intelligent adaptive control and proposes corresponding theoretical approaches to thruster configuration and control allocation for RVD. Emphasis is placed on the design method of active and passive trajectory protection in different phases of RVD, and on the safety design of the RVD mission as a whole. For purposes of verification, the Shenzhou spacecraft’s in-orbit flight mission is introduced as well. All issues addressed are described and explained from basic principles to detailed engineering methods and examples, providing aerospace engineers and students both a basic understanding of, and numerous practical engineering methods for, GNC system design in RVD.

Download or read book Advances in Guidance Navigation and Control written by Liang Yan and published by Springer Nature. This book was released on 2021-11-12 with total page 5416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features the latest theoretical results and techniques in the field of guidance, navigation, and control (GNC) of vehicles and aircraft. It covers a range of topics, including, but not limited to, intelligent computing communication and control; new methods of navigation, estimation, and tracking; control of multiple moving objects; manned and autonomous unmanned systems; guidance, navigation, and control of miniature aircraft; and sensor systems for guidance, navigation, and control. Presenting recent advances in the form of illustrations, tables, and text, it also provides detailed information of a number of the studies, to offer readers insights for their own research. In addition, the book addresses fundamental concepts and studies in the development of GNC, making it a valuable resource for both beginners and researchers wanting to further their understanding of guidance, navigation, and control.

Download or read book Modern Spacecraft Guidance Navigation and Control written by Vincenzo Pesce and published by Elsevier. This book was released on 2022-11-13 with total page 1074 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Spacecraft Guidance, Navigation, and Control: From System Modeling to AI and Innovative Applications provides a comprehensive foundation of theory and applications of spacecraft GNC, from fundamentals to advanced concepts, including modern AI-based architectures with focus on hardware and software practical applications. Divided into four parts, this book begins with an introduction to spacecraft GNC, before discussing the basic tools for GNC applications. These include an overview of the main reference systems and planetary models, a description of the space environment, an introduction to orbital and attitude dynamics, and a survey on spacecraft sensors and actuators, with details of their modeling principles. Part 2 covers guidance, navigation, and control, including both on-board and ground-based methods. It also discusses classical and novel control techniques, failure detection isolation and recovery (FDIR) methodologies, GNC verification, validation, and on-board implementation. The final part 3 discusses AI and modern applications featuring different applicative scenarios, with particular attention on artificial intelligence and the possible benefits when applied to spacecraft GNC. In this part, GNC for small satellites and CubeSats is also discussed. Modern Spacecraft Guidance, Navigation, and Control: From System Modeling to AI and Innovative Applications is a valuable resource for aerospace engineers, GNC/AOCS engineers, avionic developers, and AIV/AIT technicians. Provides an overview of classical and modern GNC techniques, covering practical system modeling aspects and applicative cases Presents the most important artificial intelligence algorithms applied to present and future spacecraft GNC Describes classical and advanced techniques for GNC hardware and software verification and validation and GNC failure detection isolation and recovery (FDIR)

Download or read book Advanced Attitude Control of Satellite written by Bing Xiao and published by Springer Nature. This book was released on with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Aerospace Guidance Navigation and Control written by Bogusław Dołęga and published by Springer. This book was released on 2017-12-15 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first three CEAS (Counsil of European Aerospace Societies) Specialist Conferences on Guidance, Navigation and Control (CEAS EuroGNC) were held in Munich, Germany in 2011, in Delft, Netherlands in 2013 and in Toulouse, France in 2017. The Warsaw University of Technology (WUT) and the Rzeszow University of Technology (RzUT) accepted the challenge of jointly organizing the 4th edition. The conference aims to promote scientific and technical excellence in the fields of Guidance, Navigation and Control (GNC) in aerospace and other fields of technology. The Conference joins together the industry with the academia research. This book covers four main topics: Guidance and Control, Control Theory Application, Navigation, UAV Control and Dynamic. The papers included focus on the most advanced and actual topics in guidance, navigation and control research areas: · Control theory, analysis, and design · ; Novel navigation, estimation, and tracking methods · Aircraft, spacecraft, missile and UAV guidance, navigation, and control · Flight testing and experimental results · Intelligent control in aerospace applications · Aerospace robotics and unmanned/autonomous systems · Sensor systems for guidance, navigation and control · Guidance, navigation, and control concepts in air traffic control systems For the 4th CEAS Specialist Conference on Guidance, Navigation and Control the International Technical Committee established a formal review process. Each paper was reviewed in compliance with good journal practices by independent and anonymous reviewers. At the end of the review process papers were selected for publication in this book.

Download or read book Advances in Spacecraft Technologies written by Jason Hall and published by BoD – Books on Demand. This book was released on 2011-02-14 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development and launch of the first artificial satellite Sputnik more than five decades ago propelled both the scientific and engineering communities to new heights as they worked together to develop novel solutions to the challenges of spacecraft system design. This symbiotic relationship has brought significant technological advances that have enabled the design of systems that can withstand the rigors of space while providing valuable space-based services. With its 26 chapters divided into three sections, this book brings together critical contributions from renowned international researchers to provide an outstanding survey of recent advances in spacecraft technologies. The first section includes nine chapters that focus on innovative hardware technologies while the next section is comprised of seven chapters that center on cutting-edge state estimation techniques. The final section contains eleven chapters that present a series of novel control methods for spacecraft orbit and attitude control.

Download or read book Spacecraft Attitude Determination and Control written by J.R. Wertz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 877 pages. Available in PDF, EPUB and Kindle. Book excerpt: Roger D. Werking Head, Attitude Determination and Control Section National Aeronautics and Space Administration/ Goddard Space Flight Center Extensiye work has been done for many years in the areas of attitude determination, attitude prediction, and attitude control. During this time, it has been difficult to obtain reference material that provided a comprehensive overview of attitude support activities. This lack of reference material has made it difficult for those not intimately involved in attitude functions to become acquainted with the ideas and activities which are essential to understanding the various aspects of spacecraft attitude support. As a result, I felt the need for a document which could be used by a variety of persons to obtain an understanding of the work which has been done in support of spacecraft attitude objectives. It is believed that this book, prepared by the Computer Sciences Corporation under the able direction of Dr. James Wertz, provides this type of reference. This book can serve as a reference for individuals involved in mission planning, attitude determination, and attitude dynamics; an introductory textbook for stu dents and professionals starting in this field; an information source for experimen ters or others involved in spacecraft-related work who need information on spacecraft orientation and how it is determined, but who have neither the time nor the resources to pursue the varied literature on this subject; and a tool for encouraging those who could expand this discipline to do so, because much remains to be done to satisfy future needs.

Download or read book Proceedings of the 44th Annual American Astronautical Society Guidance Navigation and Control Conference 2022 written by Matt Sandnas and published by Springer Nature. This book was released on 2024 with total page 1810 pages. Available in PDF, EPUB and Kindle. Book excerpt: Zusammenfassung: This conference attracts GN&C specialists from across the globe. The 2022 Conference was the 44th Annual GN&C conference with more than 230 attendees from six different countries with 44 companies and 28 universities represented. The conference presented more than 100 presentations and 16 posters across 18 topics. This year, the planning committee wanted to continue a focus on networking and collaboration hoping to inspire innovation through the intersection of diverse ideas. These proceedings present the relevant topics of the day while keeping our more popular and well-attended sessions as cornerstones from year to year. Several new topics including "Autonomous Control of Multiple Vehicles" and "Results and Experiences from OSIRIS-REx" were directly influenced by advancements in our industry. In the end, the 44th Annual GN&C conference became a timely reflection of the current state of the GN&C ins the space industry. The annual American Astronautical Society Rocky Mountain Guidance, Navigation and Control (GN&C) Conference began 1977 as an informal exchange of ideas and reports of achievements among guidance and control specialists local to the Colorado area. Bud Gates, Don Parsons, and Bob Culp organized the first conference, and began the annual series of meetings the following winter. In March 1978, the First Annual Rocky Mountain Guidance and Control Conference met at Keystone, Colorado. It met there for eighteen years, moving to Breckenridge in 1996 where it has been for over 25 years

Download or read book Spacecraft Navigation and Guidance written by Maxwell Noton and published by Springer. This book was released on 1998-03-31 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: The analysis and computational techniques associated with the navigation and guidance of spacecraft are now in a mature state of development. However the documentation has remained dispersed throughout conference papers, journals, company and contract rep orts, making it difficult to get a true, comprehensive picture of the subject. This text brings together the body of literature with suitable attention to the necessary underlying mathematics and computational techniques. It covers in detail the necessary orbital mechanics, orbit determination with emphasis on the SRIF algorithm, gr avity assist manoeuvres and guidance, both ground-based and autonomous. Attention is paid to all phases of a space mission including launch and re-entry, and whether culminating in an earth satellite or a deep space mission to planets or primitive bodies. Software associated with the text is available free to the reader by means of the Internet server of the publisher. 'Spacecraft Navigation and Guidance' is an invaluable aid for all those working within astronautics, aeronautics, and control engineering in general.