Download or read book Advances in Engineering Plasticity and its Applications AEPA 96 written by T. Abe and published by Elsevier. This book was released on 2012-12-02 with total page 939 pages. Available in PDF, EPUB and Kindle. Book excerpt: AEPA '96 provides a forum for discussion on the state-of-art developments in plasticity. An emphasis is placed on the close interaction of the theories from macroplasticity, mesoplasticity and microplasticity together with their applications in various engineering disciplines such as solid mechanics, metal forming, structural analysis, geo-mechanics and micromechanics. These proceedings include over 140 papers from the conference including case studies showing applications of plasticity in inter-disciplinary or nonconventional areas.
Download or read book Engineering Plasticity and Impact Dynamics written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Plasticity and Impact Dynamics written by Liangchi Zhang and published by World Scientific. This book was released on 2001 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasticity and impact dynamics are two important areas in engineering practice, which includes structural engineering, crashworthiness, metal formation and new structural materials. The application of engineering plasticity and impact dynamics has resulted in significant achievements both technically and economically.This book presents the state-of-the-art developments in the above fields. It contains over 15 chapters written by experts in engineering plasticity and impact dynamics. It covers a wide range of theoretical developments and engineering applications, including fundamentals of energy absorption, applications of new materials, crashworthiness, bifurcation in plasticity, microdynamics, penetration, wave propagation, fracture, laser impact and particle-impact-induced erosion.
Download or read book Advances in Engineering Plasticity written by and published by . This book was released on 2000 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Engineering Plasticity and Its Applications written by W.P. Shen and published by Trans Tech Publications Ltd. This book was released on 2004-10-15 with total page 1230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). These proceedings comprise the 192 papers which were presented at the Seventh Asia-Pacific Symposium on Engineering Plasticity and Its applications (AEPA2004), held on the 22nd to 26th September 2004 at Shanghai Jiaotong University, P.R.China.
Download or read book Advances in Engineering Plasticity XI written by Guo Xing Lu and published by Trans Tech Publications Ltd. This book was released on 2013-01-11 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). This special issue of the Key Engineering Materials contains the papers presented in the 11th Asia-Pacific Conference on Engineering Plasticity and Its Applications (AEPA2012), held in Singapore, 5-7 December 2012. This conference continues the primary objective of bringing together an international group of scientists, researchers and engineers from academic to industrial institutions, to exchange original ideas, discuss new developments and disseminate the latest research findings in the field of engineering plasticity. Previous symposia have been successfully held in Hong Kong (1992), Beijing (1994), Hiroshima (1996), Seoul (1998), Hong Kong (2000), Sydney (2002), Shanghai (2004), Nagoya (2006), Daejeon (2008) and Wuhan (2010).
Download or read book Advanced Manufacturing Processes II written by Volodymyr Tonkonogyi and published by Springer Nature. This book was released on 2021-02-04 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a timely yet comprehensive snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers a wide range of manufacturing processes, such as cutting, grinding, assembly, and coatings, including ultrasonic treatment, molding, radial-isostatic compression, ionic-plasma deposition, volumetric vibration treatment, and wear resistance. It also highlights the advantages of augmented reality, RFID technology, reverse engineering, optimization, heat and mass transfer, energy management, quality inspection, and environmental impact. Based on selected papers presented at the Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2020), held in Odessa, Ukraine, on September 8–11, 2020, this book offers a timely overview and extensive information on trends and technologies in production planning, design engineering, advanced materials, machining processes, process engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and offer a bridge between academic and industrial researchers.
Download or read book Non Destructive Testing in Civil Engineering 2000 written by T. Uomoto and published by Elsevier. This book was released on 2000-03-31 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first international symposium on NDT-CE (Non-Destructive Testing in Civil Engineering) was held in Berlin, Germany in 1991. Successive symposia were held throughout Europe until 1997. This, the 5th symposium is organized as SEIKEN SYMPOSIUM No. 26, and is sponsored by the Institute of Industrial Science, at the University of Tokyo, Japan. Original objectives of the NDT-CE symposium have been to provide an opportunity for discussing current issues and future perspectives of NDT and for promoting mutual understanding among engineers and researchers. Asia is one of the key regions for further development in NDT and this symposium in Japan will be a good opportunity not only to exchange technical information on NDT, but to promote worldwide friendship between engineers in Asian countries and other nations of the world. This volume contains 70 papers providing the most recent research results and findings. The papers are grouped under the following areas: (1) keynote papers, (2) magnetic / electric, (3) steel structures, (4) integrated test, (5) moisture, (6) strength, (7) acoustic emission, (8) various tests, (9) ultrasonic, (10) impact echo, (11) radar, (12) quality and (13) corrosion / cover.
Download or read book Advances in Damage Mechanics Metals and Metal Matrix Composites written by George Voyiadjis and published by Elsevier. This book was released on 2012-12-02 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides in a single and unified volume a clear and thorough presentation of the recent advances in continuum damage mechanics for metals and metal matrix composites. Emphasis is placed on the theoretical formulation of the different constitutive models in this area, but sections are added to demonstrate the applications of the theory. In addition, some sections contain new material that has not appeared before in the literature. The book is divided into three major parts: Part I deals with the scalar formulation and is limited to the analysis of isotropic damage in materials; Parts II and III deal with the tensor formulation and is applied to general states of deformation and damage. The material appearing in this text is limited to plastic deformation and damage in ductile materials (e.g. metals and metal matrix composites) but excludes many of the recent advances made in creep, brittle fracture, and temperature effects since the authors feel that these topics require a separate volume for this presentation. Furthermore, the applications presented in this book are the simplest possible ones and are mainly based on the uniaxial tension test.
Download or read book Advances in Fracture Research written by B.L. Karihaloo and published by Elsevier. This book was released on 2012-12-02 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture is a major cause of failure in metallic and non-metallic materials and structures. An understanding of the micro- and macro- mechanisms of fracture enables materials scientists to develop materials with high fracture resistance, which in turn helps engineers and designers to ensure the soundness and integrity of structures made from these materials. The International Congress on Fracture is held every four years and is an occasion to take stock of the major achievements in the broad field of fracture, to honour those who have made lasting contributions to this field, and to reflect on the future directions. ICF9 is published in six volumes covering the areas of:-- Failure Analysis, Remaining Life Assessment, Life Extension and Repair- Failure of Multiphase and Non-Metallic Materials- Fatigue of Metallic and Non-Metallic Materials and Structures- Theoretical and Computational Fracture Mechanics and New Directions- Testing and Characterization Methods, and Interfacial Fracture Mechanics- High Strain Rate Fracture and Impact Mechanics.
Download or read book Advances in Engineering Plasticity and its Application IX written by Jeong Whan Yoon and published by Trans Tech Publications Ltd. This book was released on 2019-02-25 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition includes the selected papers in the area of engineering plasticity, which were presented at the 14th Asia-Pacific Symposium on Engineering Plasticity and its Applications (AEPA 2018) was held on Jeju Island, Korea during December 2-7, 2018.
Download or read book Minimum Reinforcement in Concrete Members written by A. Carpinteri and published by Elsevier. This book was released on 1999-04-22 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ESIS-Technical Committee 9 on Concrete was established in 1990 and has met seven times. A proposal was put to European and extra-European laboratories entitled "Scale effects and transitional failure phenomena of reinforced concrete beams in flexure" which lead to several positive responses. The central topic discussed by the committee was that of the minimum reinforcement in concrete members. The minimum amount of reinforcement is defined as that for which "peak load at first concrete cracking" and "ultimate load after steel yielding" are equal. In this way, any brittle behaviour is avoided as well as any localized failure, if the member is not over-reinforced. In other words, there is a reinforcement percentage range, depending on the size-scale, within which the plastic limit analysis may be applied with its static and kinematic theorems. Carpinteri, Ferro, Bosco and El-Katieb propose a LEFM model, according to which reinforcement reactions are applied directly on the crack surfaces and a compatibility condition is locally imposed on the crack opening displacement in correspondence with the reinforcement. The theoretical model is found to provide a satisfactory estimate of the minimum percentage of reinforcement that depends on the scale and enables the element in flexure to prevent brittle failure.
Download or read book Small Fatigue Cracks written by K.S. Ravichandran and published by Elsevier. This book was released on 1999-09-30 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the fully peer-reviewed papers presented at the Third Engineering Foundation Conference on Small Fatigue Cracks, held under the chairmanship of K.S. Ravichandran and Y. Murakami during December 6-11, 1998, at the Turtle Bay Hilton, Oahu, Hawaii. This book presents a state-of-the-art description of the mechanics, mechanisms and applications of small fatigue cracks by most of the world's leading experts in this field. Topics ranging from the mechanisms of crack initiation, small crack behavior in metallic, intermetallic, ceramic and composite materials, experimental measurement, mechanistic and theoretical models, to the role of small cracks in fretting fatigue and the application of small crack results to the aging aircraft and high-cycle fatigue problems, are covered.
Download or read book Multiaxial Fatigue and Fracture written by E. Macha and published by Elsevier. This book was released on 1999-09-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 18 papers selected from 90 presented at the Fifth International Conference on Biaxial/Multiaxial Fatigue and Fracture held in Cracow, Poland 8-12 September 1997. The papers in this book deal with theoretical, computational and experimental aspects of the multiaxial fatigue and fracture of engineering materials and structures. The papers are divided into the following four categories: 1. Proportional cyclic loading 2. Non-proportional cyclic loading 3. Variable amplitude and random loading 4. Crack growth Most papers in this publication talk about the behaviour of constructional materials and elements of machines under non-proportional loading and under variable amplitude and random loading, which are more realistic load histories met in industrial practice. Variable amplitude loading under cyclic load with basic frequency and random loading under load with a continuous band of frequency is classified here. This book gives a review of the latest world success and directions of investigations on multiaxial fatigue and fracture. More and more often publications are results of the co-operation of researchers from different laboratories and countries. Seven out of eighteen papers included here were worked out by international authors teams. This is a symptom of the times, when science and investigations know no borders.
Download or read book Parallel Computational Fluid Dynamics 98 written by Chiao-ling Lin and published by Elsevier. This book was released on 1999-05-26 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers presented at the Parallel Computational Fluid Dynamics 1998 Conference. The book is focused on new developments and applications of parallel technology. Key topics are introduced through contributed papers and invited lectures. These include typical algorithmic developments, such as: distributed computing, domain decomposition and parallel algorithm. Some of the papers address the evaluations of software and machine performance and software tool environments. The application of parallel computers to complex fluid dynamics problems are also conveyed through sessions such as DNS/LES, combustion and reacting flows, industrial applications, water resources and environmental flows. The editors believe this book will provide many researchers, much beyond those contributing to this volume, with fresh information and reference.
Download or read book Fracture Mechanics Applications and Challenges written by M. Fuentes and published by Elsevier. This book was released on 2000-09-13 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 15 fully peer-reviewed Invited Papers which were presented at the 13th Biennial European Conference on Fracture and is a companion to the CD-ROM http://www.elsevier.com/locate/isbn/008043701xProceedings. The organisers of the ECF 13 opted from the very beginning for an application-orientated conference, and consequently, this book contributes to the understanding of fracture phenomena, and disseminates fracture concepts and their application to the solution of engineering problems to practitioners in a wide range of fields. The fields covered in this book can be broadly classified into: elastic-plastic fracture mechanics, fracture dynamics, fatigue and interactive processes, failure, structural integrity, coatings and materials, with applications to the following industrial sectors: transport, aerospace engineering, civil engineering, pipelines and automotive engineering.
Download or read book Fracture of Polymers Composites and Adhesives written by A Pavan and published by Elsevier. This book was released on 2000-10-10 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a selection of fully peer-reviewed papers which were presented at the 2nd ESIS TC4 Conference, held in Les Diablerets, Switzerland 13 - 15 September 1999. The meeting was designed to reflect the activities of the Committee over the last 15 years, and to plan future activities. The papers have been divided into four chapters under the headings of Composites, Elastic-Plastic Fracture, Adhesion, and Impact and General Fracture. These are convenient groupings, but there are many interactions between the areas, with the common theme of Fracture Mechanics underlying it all.
