Download or read book Advances in Corrosion Control of Magnesium and Its Alloys written by Viswanathan S. Saji and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium (Mg) and its alloys have received widespread acceptance in automobile industries and biomedical applications with substantial recent advancements made in their development, however a significant limitation remains their poor aqueous and galvanic corrosion resistance. This book covers both the fundamentals and recent advancements in two major corrosion protection strategies of magnesium and its alloys, namely, metal-matrix composites and protective coatings. Key features: Covers all aspects of metal-matrix composites and protective coatings for magnesium alloys to improve their corrosion resistance, wear resistance, mechanical properties and biocompatibility Provides the most recent research advancements in the corrosion mitigation strategies of magnesium and its alloys Complete with case studies specific to practical applications, this book serves as a ready reference for graduate students, researchers, engineers and industry professionals in the fields of materials, corrosion science, biofouling and protective coatings.
Download or read book Corrosion prevention of magnesium alloys written by G.-L. Song and published by Elsevier Inc. Chapters. This book was released on 2013-02-22 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium (Mg) alloys have low corrosion resistance and exhibit unusual corrosion behavior in aqueous environments. Because of this unique corrosion performance, some special corrosion prevention techniques have to be employed for Mg alloys in their applications. This chapter briefly summarizes the corrosion characteristics of Mg alloys, and also presents a strategy and methodologies to mitigate the corrosion damage of Mg alloys in applications.
Download or read book Advances in Corrosion Control of Magnesium and its Alloys written by Viswanathan S. Saji and published by CRC Press. This book was released on 2023-08-22 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium (Mg) and its alloys have received widespread acceptance in automobile industries and biomedical applications with substantial recent advancements made in their development, however a significant limitation remains their poor aqueous and galvanic corrosion resistance. This book covers both the fundamentals and recent advancements in two major corrosion protection strategies of magnesium and its alloys, namely, metal-matrix composites and protective coatings. Key features: Covers all aspects of metal-matrix composites and protective coatings for magnesium alloys to improve their corrosion resistance, wear resistance, mechanical properties and biocompatibility Provides the most recent research advancements in the corrosion mitigation strategies of magnesium and its alloys Complete with case studies specific to practical applications, this book serves as a ready reference for graduate students, researchers, engineers and industry professionals in the fields of materials, corrosion science, biofouling and protective coatings.
Download or read book Corrosion of Magnesium Alloys written by G L Song and published by Woodhead Publishing. This book was released on 2011-03-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of magnesium alloys is increasing in a range of applications, and their popularity is growing wherever lightweight materials are needed. This book provides a comprehensive account of the corrosion of magnesium alloys. It covers not only the corrosion performances and mechanisms of Mg alloys in conventional environments, such as sodium chloride solutions, but also looks at their corrosion behaviours in special media, like engine coolants and simulated body fluids. Part one covers fundamentals such as the corrosion electrochemistry, activity and passivity of magnesium and its alloys. Part two then considers the metallurgical effect in relation to the corrosion of magnesium alloys, including the role of micro-structure and earth-rare elements, the corrosion behaviour of magnesium-based bulk metallic glasses, and the corrosion of innovative magnesium alloys. Part three goes on to describe environmental influences on the corrosion of magnesium alloys, such as atmospheric corrosion, stress corrosion cracking, creep and fatigue behaviour, and galvanic corrosion. Finally, part four is concerned with various means of protecting magnesium alloys against corrosion through the use of aluminium electrodeposition, conversion and electrophoretic coatings, and anodisation. With its distinguished editor and team of contributors, this book is an invaluable resource for metallurgists, engineers and designers working with magnesium and its alloys, as well as professionals in the aerospace and automotive industries.
Download or read book Plasma Electrolytic Oxidation PEO Coatings written by Marta Mohedano and published by MDPI. This book was released on 2021-06-02 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma electrolytic oxidation (PEO), also known as micro-arc oxidation (MAO), functionalizes surfaces, improving the mechanical, thermal, and corrosion performance of metallic substrates, along with other tailored properties (e.g., biocompatibility, catalysis, antibacterial response, self-lubrication, etc.). The extensive field of applications of this technique ranges from structural components, in particular, in the transport sector, to more advanced fields, such as bioengineering. The present Special Issue covers the latest advances in PEO‐coated light alloys for structural (Al, Mg) and biomedical applications (Ti, Mg), with 10 research papers and 1 review from leading research groups around the world.
Download or read book Corrosion prevention of magnesium alloys written by G.-L. Song and published by Elsevier Inc. Chapters. This book was released on 2013-02-22 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion is a surface degradation process determined by an alloy’s surface state, composition and microstructure. This chapter presents an overview of surface processing and alloying techniques that can improve the corrosion resistance of Mg alloys. It is found that some surface engineering processes can significantly change the surface state, composition and microstructure of Mg alloys. For example, surface mechanical and chemical cleaning can effectively remove surface contaminations; burnishing can modify the surface layer’s microstructure including grain size and grain orientation; surface alloying can produce a metallic layer on top of the Mg alloy base material. All these surface engineering processes lead to enhanced corrosion resistance of Mg alloys without affecting their bulk properties.
Download or read book Corrosion prevention of magnesium alloys written by K. Yang and published by Elsevier Inc. Chapters. This book was released on 2013-02-22 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium-based metals, including pure magnesium and its alloys, are becoming increasingly popular in the medical industry due to the fact that they are biodegradable. This chapter briefly introduces the concept of biodegradable magnesium-based metals and their advantages as a new class of metallic biomaterials. Relevant research progress is summarized, especially the corrosion control of magnesium-based metals by appropriate surface modification, which is a key issue for clinical applications.
Download or read book Corrosion Prevention of Magnesium Alloys written by Guang-Ling Song and published by Elsevier. This book was released on 2013-02-22 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium (Mg) alloys are receiving increasing attention due to their abundance, light weight, castability, formability, mechanical properties and corrosion performance. By selecting the appropriate combination of materials, coatings and surface modifications, their corrosion resistance can be greatly enhanced. Corrosion prevention of magnesium alloys is a comprehensive guide to the effective prevention of corrosion in these important light metals. Part one discusses alloying, inhibition and prevention strategies for magnesium alloys as well as corrosion and prevention principles. Part two reviews surface treatment and conversion. Beginning with an overview of surface cleaning and pre-conditioning, the book goes on to discuss the use of surface processing and alloying, laser treatments, chemical conversion and electrochemical anodization to improve the corrosion resistance of magnesium alloys. Coatings are then the focus of part three, including varied plating techniques, cold spray coatings, gel and electroless electrophoresis coatings. Finally, the book concludes in part four with a selection of case studies investigating the application of preventative techniques for both automotive and medical applications. With its distinguished editor and international team of expert contributors, Corrosion prevention of magnesium alloys is a key reference tool for all those working with magnesium and its alloys, including scientists, engineers, metallurgists, aerospace and automotive professionals, and academics interested in this field. Chapters provide an overview of surface cleaning and pre-conditioning Examines processes to improve the corrosion resistance of magnesium alloys, including laser treatments and chemical conversion and electrochemical anodization Discusses cold spray, sol-gel and electrophoretic coatings
Download or read book Corrosion prevention of magnesium alloys written by S.A. Salman and published by Elsevier Inc. Chapters. This book was released on 2013-02-22 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Anodizing is one of the most widely used surface treatments for magnesium and its alloys. In this electrolytic oxidation process, the surface of a metal is converted to an anodic oxide/hydroxide film with desirable protective, decorative or functional properties. This chapter describes the fundamentals of anodizing treatment, with an emphasis on the difference between magnesium anodizing and aluminum anodizing. The chapter then discusses the most widely used commercial anodic treatments and describes how the treatment conditions affect the corrosion resistance and the physical and mechanical properties of the anodic coating that forms on magnesium alloys. A critical review of recent patents and advances in the anodizing of magnesium is given. After reviewing the literature, the chapter explains how surface treatment can lead to more widespread use of magnesium alloys in a range of industrial applications.
Download or read book Corrosion and Protection of Magnesium Alloys written by Liang Wu and published by Frontiers Media SA. This book was released on 2023-02-16 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium (Mg) alloys, possessing good thermal and electrical conductivity, low density, recyclability, high specific strength, and excellent damping capacity, are regarded as one of the most promising light metallic materials. Mg alloys are also known as the “inexhaustible green light engineering material” compared with steel, aluminum, copper, and engineering plastics, providing some important applications in communications, automotive, defense, aerospace, and biomedical industries. However, the low electrode potential causes poor corrosion resistance in the environment of moist air, sulfur, and marine atmosphere. And thus, the corrosion and protection technology of Mg and its alloys is listed as an important research topic in this field. In this Research Topic, the latest research papers on corrosion and protection of Mg and its alloys are collected to provide a platform for researchers and readers to understand the recent developments in this field. Good use of this platform could improve the international research level in corrosion and protection of Mg and its alloys and promote the “green, safe, life-extending and smart” anti-corrosion technology and expand the application range of Mg and its alloys. High-quality Original Research and Review articles in this field are all welcome for submission to this Research Topic. Research interests include but are not limited to the following areas: • Corrosion behaviors and mechanisms • Surface treatment technology • Biodegradable medical applications • High-temperature oxidation • Inhibitors for Mg and its alloys • New monitoring, evaluation, simulation, and prediction methods
Download or read book Corrosion prevention of magnesium alloys written by K. Azumi and published by Elsevier Inc. Chapters. This book was released on 2013-02-22 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plating on Mg alloys has proved difficult due to their high susceptibility to the degradation reactions such as galvanic corrosion in the plating processes. In this chapter, surface conditioning, activation, electroless- or electroplating methods are discussed from viewpoints of corrosion engineering. Degradation reactions of the Mg substrate in each plating stage are considered to figure out how to suppress degradation of substrate and to achieve uniform deposition of a plating layer. Building up an interface between the substrate and the plating layer is also an important subject to establish enough adhesion strength of the plating layer and low defect density to prohibit corrosion progress of the substrate. Al coating plating on Mg alloys electrodeposited from an ionic liquid bath is also introduced to provide coatings with less-galvanic coupling property with a less-noble Mg substrate.
Download or read book Corrosion Protection of Magnesium and Magnesium Alloys written by E. L. White and published by . This book was released on 1965 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: This memorandum deals with the corrosion protection of magnesium and magnesium alloys. The corrosion resistance of these alloys in many natural environments, while not as good as that of copper, nickel, stainless steel, and aluminum, is in the same range as that of the iron and plain carbon steels. Some type of additional corrosion protection is often necessary and, as with steel, the protective measures usually involve some type of coating system and/or surface treatments. Also, magnesium can suffer accelerated attack when coupled, in the presence of a conductive electrolyte, to most metals below it in the galvanic series. This galvanic effect complicates the problem of corrosion protection. A number of coating systems have been proposed and used satisfactorily. Depending upon the application, these coating systems include the use of conversion coatings, organic coatings, metallic coatings, and others. In addition, special designs can be employed to improve the over-all corrosion resistance of the systems. This memorandum describes many of the coating systems and design methods which are used to reduce corrosive attack on both galvanically coupled and uncoupled magnesium assembliesd (Author).
Download or read book Magnesium Alloys written by Frank Czerwinski and published by BoD – Books on Demand. This book was released on 2014-11-05 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium alloys with their unique physical and chemical properties are important candidates for many modern engineering applications. Their density, being the lowest of all structural metals, makes them the primary choice in global attempts aimed at reducing the weight of transportation vehicles. However, magnesium also creates challenges at certain stages of raw alloy melting, fabrication of net-shape components and their service. The first one is caused by very high affinity of magnesium to oxygen, which requires protective atmospheres increasing manufacturing cost and heavily contributing to greenhouse gas emissions. The second challenge relates to very high corrosivity of liquid magnesium towards materials it contacts. This imposes restrictions on the selection of materials used to contain, transfer or process molten magnesium during manufacturing operations. A mixture of unique benefits and serious challenges of magnesium alloys in solid and liquid states described here makes the book very useful for a broad audience of scientists and engineers from academia and industry.
Download or read book Corrosion prevention of magnesium alloys written by B.L. Jiang and published by Elsevier Inc. Chapters. This book was released on 2013-02-22 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-arc oxidation (MAO) is a novel and attractive surface engineering process for magnesium (Mg) alloys. In an electrolytic bath with high electric energy, the surface of a magnesium alloy can be converted into a dense and hard ceramic oxide coating. The MAO process can be used in diverse applications as a corrosion control technique. Due to its simplified pre-treatment, superior corrosion resistance performance and environmentally safe coating process, MAO technology has emerged as an important alternative to anodizing techniques in certain areas. This chapter presents a review of MAO techniques for Mg alloys from the scientific, technological and application points of view.
Download or read book Corrosion prevention of magnesium alloys written by J. Dutta Majumdar and published by Elsevier Inc. Chapters. This book was released on 2013-02-22 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium and its alloys are promising materials for automotive, aerospace and bio-implant applications due to low density (1.81g/cm3), very low elastic modulus (45GPa) and high tensile yield strength (200MPa). However, they corrode too quickly in aggressive environments and possess poor wear resistance. Wear and corrosion are essentially surface dependent degradation which may be improved by suitable modification of surface microstructure and composition. Laser as a source of coherent and monochromatic radiation may be applied for tailoring the surface microstructure and composition. In the present contribution, a detailed overview of laser surface engineering of magnesium-based alloys is presented. Finally, the future scope of application of laser surface engineering of magnesium-based alloys is presented with examples.
Download or read book Corrosion prevention of magnesium alloys written by G.-L. Song and published by Elsevier Inc. Chapters. This book was released on 2013-02-22 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thin E-coating can be rapidly deposited on the surface of a Mg alloy in a cathodic E-coating bath without applying any current or potential. The selectively self-deposited coating results from the high surface alkalinity of Mg. The ‘electroless’ E-coating pre-film can offer adequate corrosion protection for Mg alloys. The stability of the film can be further improved significantly after curing. The coating can be either a temporary or permanent layer. It may also be used to pre-treat a Mg alloy surface for a normal E-coating or powder coating. Such a simple dipping step can even seal porous phosphating or anodizing coatings on Mg alloys.
Download or read book Corrosion prevention of magnesium alloys written by X.-B. Chen and published by Elsevier Inc. Chapters. This book was released on 2013-02-22 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: The escalation of ongoing research on the topic of conversion coatings for magnesium alloys confirms that the search continues for appropriate replacements to toxic chromate-based coatings. This chapter reviews the performance of the range of typical conversion coating technologies presently available. As a means to rationalise coating performance and characteristics more generally, thermodynamic analysis has been used to compare coating processes and coating pretreatment, the latter of which appears to be at least as significant as the choice of coating technology itself.
