Download or read book Advanced Techniques for Testing of Cement Based Materials written by Marijana Serdar and published by Springer Nature. This book was released on 2020-02-18 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book examines advanced, non-standardized techniques that have been developed for determining different properties of cement paste, mortar and concrete, and provides state-of-the-art information on methods for monitoring hydration-induced changes in cement-based materials (CBMs). These methods are often nondestructive and allow quasi-continuous monitoring covering the time span from placement of the material to formation of a fully hardened cement composite. The book also presents various applications of acoustic emission for characterizing fresh concrete, recent developments in ultrasonic methods for characterizing CBMs since placement, application of ambient response methods for measuring elastic modulus, methods for determining deformational characteristics of CBMs since setting and methods for in situ measurements of stresses in concrete elements during hardening.
Download or read book Report 31 Advanced Testing of Cement Based Materials during Setting and Hardening Report of RILEM Technical Committee 185 ATC written by Hans W. Reinhardt and published by RILEM Publications. This book was released on 2005 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Materials and Techniques for Reinforced Concrete Structures written by Mohamed Abdallah El-Reedy Ph.D and published by CRC Press. This book was released on 2009-06-26 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: From China to Kuala Lumpur to Dubai to downtown New York, amazing buildings and unusual structures create attention with the uniqueness of their design. While attractive to developers and investors, the safe and economic design and construction of reinforced concrete buildings can sometimes be problematic. Advanced Materials and Techniques for Rein
Download or read book Testing of Construction Materials written by Bahurudeen A and published by CRC Press. This book was released on 2020-12-18 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an understanding of peer-reviewed international construction materials and their testing methods in a simplified manner at a high technical level. It focuses on specific construction materials, such as cement, concrete, bricks, lime, paints, steel and so forth, distributed in ten different chapters. Using real-time quality control as the underlying determinant, the book material exclusively follows Indian, American, European, German and South African standards. Relevant modern sophisticated material testing techniques, like scanning electron microscope (SEM), thermo gravimetric analysis (TGA) and X-Ray diffraction (XRD), are also described. Aimed at undergraduate, senior undergraduate and early career professionals in civil engineering and construction engineering, this book Gives a clear background of material testing and its importance Includes step-by-step procedures for easy understanding of and for performing the tests Covers Indian, ASTM, South African, DIN German and European Standards Includes basic and advanced techniques for chemical admixtures Each chapter concludes with practice questions, including 400+ solved questions and 50+ test procedures in total
Download or read book Advanced Concrete Technology 4 written by John Newman and published by Elsevier. This book was released on 2003-08-21 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the Institute of Concrete Technology's Advanced Concrete Technology Course, these four volumes are a comprehensive educational and reference resource for the concrete materials technologist. An expert international team of authors from research, academia and industry has been brought together to produce this unique series. Each volume deals with a different aspect of the subject: constituent materials, properties, processes and testing and quality. With worked examples, case studies and illustrations throughout, the books will be a key reference for the concrete specialist for years to come. Expert international authorship ensures the series is authoritative Case studies and worked examples help the reader apply their knowledge to practice Comprehensive coverage of the subject gives the reader all the necessary reference material
Download or read book Advanced Concrete Technology Set written by John Newman and published by Elsevier. This book was released on 2003-11-06 with total page 1920 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the Institute of Concrete Technology's advanced course, this new four volume series is a comprehensive educational and reference resource for the concrete materials technologist. An expert international team of authors from research, academia and industry has been brought together to produce this unique reference source. Each volume deals with different aspects of the properties, composition, uses and testing of concrete. With worked examples, case studies and illustrations throughout, this series will be a key reference for the concrete specialist for years to come. Expert international authorship ensures the series is authoritative Case studies and worked examples help the reader apply their knowledge to practice Comprehensive coverage of the subject gives the reader all the necessary reference material
Download or read book Advanced Concrete Technology written by Zongjin Li and published by John Wiley & Sons. This book was released on 2022-08-17 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Concrete Technology A thorough grounding in the science of concrete combined with the latest developments in the rapidly evolving field of concrete technology In the newly revised second edition of Advanced Concrete Technology, a distinguished team of academics and engineers delivers a state-of-the-art exploration of modern and advanced concrete technologies developed during the last decade. The book combines the essential concepts and theory of concrete with practical examples of material design, composition, processing, characterization, properties, and performance. The authors explain, in detail, the hardware and software of concrete, and offer readers discussions of the most recent advances in concrete technology, including, but not limited to, concrete recycling, nanotechnology, microstructural simulation, additive manufacturing, and non-destructive testing methods. This newest edition of Advanced Concrete Technology provides a sustained emphasis on sustainable and novel technologies, like new binders, 3D printing, and other advanced materials and techniques. Readers will also find: A thorough introduction to concrete, including its definition and its historical evolution as a material used in engineering and construction In-depth explorations of the materials for making concrete and the properties of fresh concrete Comprehensive discussions of the material structure of concrete, hardened concrete, and advanced cementitious composites Fulsome treatments of concrete fracture mechanics, non-destructive testing in concrete engineering, and future trends in concrete Perfect for undergraduate and graduate students studying civil or materials engineering—especially those taking classes in the properties of concrete or concrete technologies—as well as engineers in the concrete industry. Advanced Concrete Technology, 2nd Edition will also earn a place in the libraries of civil and materials engineers working in the industry.
Download or read book Advanced Concrete Technology Testing and quality written by John Brian Newman and published by . This book was released on 2003 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pore Structure of Cement Based Materials written by Kalliopi K. Aligizaki and published by CRC Press. This book was released on 2005-09-22 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pore Structure of Cement-Based Materials provides a thorough treatment of the experimental techniques used to characterize the pore structure of materials. The text presents the principles and practical applications of the techniques used, organized in an easy-to-follow and uncomplicated manner, providing the theoretical background, the way to anal
Download or read book International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement based Materials and Concrete Structures written by Agnieszka Jędrzejewska and published by Springer Nature. This book was released on 2023-06-08 with total page 1242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the latest advances, innovations, and applications in cement-based materials (CBM) and concrete structures, as presented by leading international researchers and engineers at the International RILEM Conference on synergizing expertise toward sustainability and robustness of CBM and concrete structures (SynerCrete), held in Milos Island, Greece, on June 14-16, 2023. The aim of the conference was to discuss and arouse progress in research, development, and application of CBM and structural concrete through combination of expertise from distinct fields of knowledge, such as performance-based design, 3D modeling for analysis/design, building information modeling, and even robotics, while keeping focus on multiscale approaches at time and spatial levels. It covers a diverse range of topics concerning alternative concrete formulations for adaptation to climate change, performance-based and multiphysics/multiscale design and innovative testing, structural health monitoring and maintenance management, integral BIM-based planning, and resource-responsible building. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster new multidisciplinary collaborations. The two volumes encompass more than 200 original contributions in the field.
Download or read book Advanced Concrete Technology written by Zongjin Li and published by John Wiley & Sons. This book was released on 2011-01-11 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past two decades concrete has enjoyed a renewed level of research and testing, resulting in the development of many new types of concrete. Through the use of various additives, production techniques and chemical processes, there is now a great degree of control over the properties of specific concretes for a wide range of applications. New theories, models and testing techniques have also been developed to push the envelope of concrete as a building material. There is no current textbook which brings all of these advancements together in a single volume. This book aims to bridge the gap between the traditional concrete technologies and the emerging state-of-the-art technologies which are gaining wider use.
Download or read book Advanced Concrete Technology 2 written by John Newman and published by Elsevier. This book was released on 2003-10-31 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the Institute of Concrete Technology's Advanced Concrete Technology Course, these four volumes are a comprehensive educational and reference resource for the concrete materials technologist. An expert international team of authors from research, academia and industry has been brought together to produce this unique series. Each volume deals with a different aspect of the subject: constituent materials, properties, processes and testing and quality. With worked examples, case studies and illustrations throughout, the books will be a key reference for the concrete specialist for years to come. Expert international authorship ensures the series is authoritative Case studies and worked examples help the reader apply their knowledge to practice Comprehensive coverage of the subject gives the reader all the necessary reference material
Download or read book Mechanical Properties of Cementitious Materials at Microscale written by Ya Wei and published by Springer Nature. This book was released on 2022-11-14 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides information on characterizing the microstructure and mechanical properties of cementitious materials at microscale. Specifically, with the intention to provide the methods of preparing the samples for the micro-scale mechanical testing, to address the techniques for measuring and analyzing the elastic modulus, the stiffness, and the fracture toughness of cementitious materials at micro scale by instrumented indentation, to describe a method for measuring and interpreting creep behavior of cementitious materials at micro scale, and to demonstrate the homogenization method for obtaining the mechanical properties of cementitious materials across scales. The information in this book is helpful to a wide readership in the field of civil engineering and materials science working with cementitious materials and other composite materials.
Download or read book International RILEM Conference on Early Age and Long Term Cracking in RC Structures written by Fragkoulis Kanavaris and published by Springer Nature. This book was released on 2021-05-18 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the latest advances, innovations and applications in the field of crack control in concrete, as presented by leading international researchers and engineers at the International RILEM Conference on Early-age and Long-term Cracking in RC Structures (CRC 2021), held in Paris, France on April 9, 2021. It covers early-age and long-term imposed deformations in concrete, analytical formulations for calculating crack widths in concrete, numerical simulations of early-age and long-term restrained behaviour of concrete elements, experimental investigations on cracking, on-site monitoring of imposed deformations and cracking, crack control and repair, and sustainability of design and remediation. The conference demonstrated that a comprehensive approach to this problem requires the design of robust experimental techniques, the development of multiscale models and the evaluation of code-based and other analytical approaches relevant to crack control in concrete. The contributions, which were selected through a rigorous international peer-review process, share exciting ideas that will spur novel research directions and foster new multidisciplinary collaborations.
Download or read book Cement Based Materials written by Hosam El-Din M. Saleh and published by BoD – Books on Demand. This book was released on 2018-10-10 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cement-based materials have been used by humans nearly since the dawn of civilization. The Egyptians used lime and gypsum cement to bind their aggregate materials, mud and straw, resulting in bricks that are used for building their famous Egyptian pyramids (between 3000 and 2500 BC). Hydrated cement is a cement material bonded together with water and used for building construction; it is characterized by acceptable chemical, physical, thermal, mechanical, and structural stability. It plays a main role in the creation of vessels for storage, roads to travel on, weather-resistant structure for protection, inert hard stabilizer for hazardous wastes, and so on. Due to the composition of these materials and their advantages, it has been practiced in different applications. Cement is an essential component of making concrete, the single most prevalent building material used worldwide for construction, skyscrapers, highways, tunnels, bridges, hydraulic dams, and railway ties. Besides their numerous desired properties, there are some undesirable features. To overcome these disadvantages, several studies were established to prepare, improve, and evaluate innovative cement-based materials. Despite its oldness and deep research, every year several methods and materials evolve and so do cement technology. This book intends to provide a comprehensive overview on recent advances in the evaluation of these materials.
Download or read book Interfacial Transition Zone in Concrete written by J.C. Maso and published by CRC Press. This book was released on 2004-03-01 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: An important new state-of-the-art report prepared by RILEM Technical Committee 108 ICC. It has been written by a team of leading international experts from the UK, USA, Canada, Israel, Germany, Denmark, South Africa, Italy and France. Research studies over recent years in the field of cement science have focused on the behaviour of the interfaces between the components of cement-based materials. The techniques used in other areas of materials science are being applied to the complex materials found in cements and concretes, and this book provides a significant survey of the present state of the art.
Download or read book Non destructive Testing of Materials in Civil Engineering written by Krzysztof Schabowicz and published by MDPI. This book was released on 2019-11-19 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book was proposed and organized as a means to present recent developments in the field of nondestructive testing of materials in civil engineering. For this reason, the articles highlighted in this editorial relate to different aspects of nondestructive testing of different materials in civil engineering—from building materials to building structures. The current trend in the development of nondestructive testing of materials in civil engineering is mainly concerned with the detection of flaws and defects in concrete elements and structures, and acoustic methods predominate in this field. As in medicine, the trend is towards designing test equipment that allows one to obtain a picture of the inside of the tested element and materials. From this point of view, interesting results with significance for building practices have been obtained
