Download or read book Advanced Signal Processing Techniques Applied to Power Systems Control and Analysis written by Zbigniew Leonowicz and published by . This book was released on 2020-08-31 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: The work published in this book is related to the application of advanced signal processing in smart grids, including power quality, data management, stability and economic management in presence of renewable energy sources, energy storage systems, and electric vehicles. The distinct architecture of smart grids has prompted investigations into the use of advanced algorithms combined with signal processing methods to provide optimal results. The presented applications are focused on data management with cloud computing, power quality assessment, photovoltaic power plant control, and electrical vehicle charge stations, all supported by modern AI-based optimization methods.

Download or read book Power Systems Signal Processing for Smart Grids written by Paulo Fernando Ribeiro and published by John Wiley & Sons. This book was released on 2013-09-20 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: With special relation to smart grids, this book provides clear and comprehensive explanation of how Digital Signal Processing (DSP) and Computational Intelligence (CI) techniques can be applied to solve problems in the power system. Its unique coverage bridges the gap between DSP, electrical power and energy engineering systems, showing many different techniques applied to typical and expected system conditions with practical power system examples. Surveying all recent advances on DSP for power systems, this book enables engineers and researchers to understand the current state of the art and to develop new tools. It presents: an overview on the power system and electric signals, with description of the basic concepts of DSP commonly found in power system problems the application of several signal processing tools to problems, looking at power signal estimation and decomposition, pattern recognition techniques, detection of the power system signal variations description of DSP in relation to measurements, power quality, monitoring, protection and control, and wide area monitoring a companion website with real signal data, several Matlab codes with examples, DSP scripts and samples of signals for further processing, understanding and analysis Practicing power systems engineers and utility engineers will find this book invaluable, as will researchers of electrical power and energy systems, postgraduate electrical engineering students, and staff at utility companies.

Download or read book Advanced Signal Processing Techniques Applied to Power Systems Control and Analysis written by Antonio Bracale and published by . This book was released on 2020 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: The work published in this book is related to the application of advanced signal processing in smart grids, including power quality, data management, stability and economic management in presence of renewable energy sources, energy storage systems, and electric vehicles. The distinct architecture of smart grids has prompted investigations into the use of advanced algorithms combined with signal processing methods to provide optimal results. The presented applications are focused on data management with cloud computing, power quality assessment, photovoltaic power plant control, and electrical vehicle charge stations, all supported by modern AI-based optimization methods.

Download or read book Digital Signal Processing in Power System Protection and Control written by Waldemar Rebizant and published by Springer Science & Business Media. This book was released on 2011-07-28 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Signal Processing in Power System Protection and Control bridges the gap between the theory of protection and control and the practical applications of protection equipment. Understanding how protection functions is crucial not only for equipment developers and manufacturers, but also for their users who need to install, set and operate the protection devices in an appropriate manner. After introductory chapters related to protection technology and functions, Digital Signal Processing in Power System Protection and Control presents the digital algorithms for signal filtering, followed by measurement algorithms of the most commonly-used protection criteria values and decision-making methods in protective relays. A large part of the book is devoted to the basic theory and applications of artificial intelligence techniques for protection and control. Fuzzy logic based schemes, artificial neural networks, expert systems and genetic algorithms with their advantages and drawbacks are discussed. AI techniques are compared and it is also shown how they can be combined to eliminate the disadvantages and magnify the useful features of particular techniques. The information provided in Digital Signal Processing in Power System Protection and Control can be useful for protection engineers working in utilities at various levels of the electricity network, as well as for students of electrical engineering, especially electrical power engineering. It may also be helpful for other readers who want to get acquainted with and to apply the filtering, measuring and decision-making algorithms for purposes other than protection and control, everywhere fast and on-line signal analysis is needed for proper functioning of the apparatus.

Download or read book Handbook of Research on Power and Energy System Optimization written by Kumar, Pawan and published by IGI Global. This book was released on 2018-03-16 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, the development of advanced structures for providing sustainable energy has been a topic at the forefront of public and political conversation. Many are looking for advancements on pre-existing sources and new and viable energy options to maintain a modern lifestyle. The Handbook of Research on Power and Energy System Optimization is a critical scholarly resource that examines the usage of energy in relation to the perceived standard of living within a country and explores the importance of energy structure augmentation. Featuring coverage on a wide range of topics including energy management, micro-grid, and distribution generation, this publication is targeted towards researchers, academicians, and students seeking relevant research on the augmentation of current energy structures to support existing standards of living.

Download or read book Signal Analysis in Power Systems written by Zbigniew Leonowicz and published by . This book was released on 2020 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: The analysis of power systems under various conditions represents one of the most important and complex tasks in electrical power engineering. Studies in this area are necessary to ensure that the reliability, efficiency, and stability of the power system is not adversely affected. This issue is devoted to reviews and applications of modern methods of signal processing used to analyze the operation of a power system and evaluate the performance of the system in all aspects. Smart grids as an emerging research field of the current decade is the focus of this issue. Monitoring capability with data integration, advanced analysis of support system control, enhanced power security and effective communication to meet the power demand, efficient energy consumption and minimum costs, and intelligent interaction between power-generating and -consuming devices depends on the selection and implementation of advanced signal analysis and processing techniques.

Download or read book Time Varying Waveform Distortions in Power Systems written by Paulo Fernando Ribeiro and published by John Wiley & Sons. This book was released on 2009-07-10 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of analytical signal processing techniques applied to power systems and power quality applications. This reference book is unique in addressing time-varying waveform and harmonic distortions. It details many different approaches, pooling cutting edge material from university lecturers and practising power engineers to provide a wide spectrum of expertise. Divided into clear sections, the book discusses a range of topics including... current and voltage variations; standards and measurement issues; advanced techniques such as spectral, time-frequency, probabilistic; and further methods, such as independent component analysis, and fuzzy logic. Case studies, real world data and examples (including basic application examples and sample waves from industrial sites) supplement the theory and demonstrate the methods shown. With extensive appendices in addition, this book is of great value to power systems, utility, maintenance and instrumentation engineers. It is also a useful source of information for researchers and consultants, university professors and graduate students in power systems and power quality areas.

Download or read book Advanced Data Analytics for Power Systems written by Ali Tajer and published by Cambridge University Press. This book was released on 2021-04-08 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experts in data analytics and power engineering present techniques addressing the needs of modern power systems, covering theory and applications related to power system reliability, efficiency, and security. With topics spanning large-scale and distributed optimization, statistical learning, big data analytics, graph theory, and game theory, this is an essential resource for graduate students and researchers in academia and industry with backgrounds in power systems engineering, applied mathematics, and computer science.

Download or read book Digital Signal Processing in Power Electronics Control Circuits written by Krzysztof Sozański and published by Springer Science & Business Media. This book was released on 2013-07-03 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many digital control circuits in current literature are described using analog transmittance. This may not always be acceptable, especially if the sampling frequency and power transistor switching frequencies are close to the band of interest. Therefore, a digital circuit is considered as a digital controller rather than an analog circuit. This helps to avoid errors and instability in high frequency components. Digital Signal Processing in Power Electronics Control Circuits covers problems concerning the design and realization of digital control algorithms for power electronics circuits using digital signal processing (DSP) methods. This book bridges the gap between power electronics and DSP. The following realizations of digital control circuits are considered: digital signal processors, microprocessors, microcontrollers, programmable digital circuits. Discussed in this book is signal processing, starting from analog signal acquisition, through its conversion to digital form, methods of its filtration and separation, and ending with pulse control of output power transistors. The book is focused on two applications for the considered methods of digital signal processing: an active power filter and a digital class D power amplifier. The major benefit to readers is the acquisition of specific knowledge concerning discussions on the processing of signals from voltage or current sensors using a digital signal processor and to the signals controlling the output inverter transistors. Included are some Matlab examples for illustration of the considered problems.

Download or read book Wavelet Analysis and Transient Signal Processing Applications for Power Systems written by Zhengyou He and published by John Wiley & Sons. This book was released on 2016-09-26 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: An original reference applying wavelet analysis to power systems engineering • Introduces a modern signal processing method called wavelet analysis, and more importantly, its applications to power system fault detection and protection • Concentrates on its application to the power system, offering great potential for fault detection and protection • Presents applications, examples, and case studies, together with the latest research findings • Provides a combination of the author’s tutorial notes from electrical engineering courses together with his own original research work, of interest to both industry and academia

Download or read book Power System Fault Diagnosis written by Md Shafiullah and published by Elsevier. This book was released on 2022-01-14 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power System Fault Diagnosis: A Wide Area Measurement Based Intelligent Approach is a comprehensive overview of the growing interests in efficient diagnosis of power system faults to reduce outage duration and revenue losses by expediting the restoration process.This book illustrates intelligent fault diagnosis schemes for power system networks, at both transmission and distribution levels, using data acquired from phasor measurement units. It presents the power grid modeling, fault modeling, feature extraction processes, and various fault diagnosis techniques, including artificial intelligence techniques, in steps. The book also incorporates uncertainty associated with line parameters, fault information (resistance and inception angle), load demand, renewable energy generation, and measurement noises. Provides step-by-step modeling of power system networks (distribution and transmission) and faults in MATLAB/SIMULINK and real-time digital simulator (RTDS) platforms Presents feature extraction processes using advanced signal processing techniques (discrete wavelet and Stockwell transforms) and an easy-to-understand optimal feature selection method Illustrates comprehensive results in the graphical and tabular formats that can be easily reproduced by beginners Highlights various utility practices for fault location in transmission networks, distribution systems, and underground cables.

Download or read book Advanced Digital Signal Processing written by Glenn Zelniker and published by CRC Press. This book was released on 1993-10-28 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a detailed treatment of the concepts and applications of advanced digital signal processing.

Download or read book Monitoring and Control of Electrical Power Systems using Machine Learning Techniques written by Emilio Barocio Espejo and published by Elsevier. This book was released on 2023-01-11 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monitoring and Control of Electrical Power Systems using Machine Learning Techniques bridges the gap between advanced machine learning techniques and their application in the control and monitoring of electrical power systems, particularly relevant for heavily distributed energy systems and real-time application. The book reviews key applications of deep learning, spatio-temporal, and advanced signal processing methods for monitoring power quality. This reference introduces guiding principles for the monitoring and control of power quality disturbances arising from integration of power electronic devices and discusses monitoring and control of electrical power systems using benchmark test systems for the creation of bespoke advanced data analytic algorithms. Covers advanced applications and solutions for monitoring and control of electrical power systems using machine learning techniques for transmission and distribution systems Provides deep insight into power quality disturbance detection and classification through machine learning, deep learning, and spatio-temporal algorithms Includes substantial online supplementary components focusing on dataset generation for machine learning training processes and open-source microgrid model simulators on GitHub

Download or read book Wind Energy Conversion Systems written by S.M. Muyeen and published by Springer Science & Business Media. This book was released on 2012-01-04 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This exploration of the technical progress of wind energy conversion systems also examines potential future trends and includes recently developed systems such as those for multi-converter operation of variable-speed wind generators and lightning protection.

Download or read book Advanced Control Engineering Methods in Electrical Engineering Systems written by Mohammed Chadli and published by Springer. This book was released on 2018-09-10 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the Third International Conference on Electrical Engineering and Control (ICEECA2017). It covers new control system models and troubleshooting tips, and also addresses complex system requirements, such as increased speed, precision and remote capabilities, bridging the gap between the complex, math-heavy controls theory taught in formal courses, and the efficient implementation required in real-world industry settings. Further, it considers both the engineering aspects of signal processing and the practical issues in the broad field of information transmission and novel technologies for communication networks and modern antenna design. This book is intended for researchers, engineers, and advanced postgraduate students in control and electrical engineering, computer science, signal processing, as well as mechanical and chemical engineering.

Download or read book Signal Processing of Power Quality Disturbances written by Math H. J. Bollen and published by John Wiley & Sons. This book was released on 2006-08-04 with total page 883 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridging the gap between power quality and signal processing This innovative new text brings together two leading experts, one from signal processing and the other from power quality. Combining their fields of expertise, they set forth and investigate various types of power quality disturbances, how measurements of these disturbances are processed and interpreted, and, finally, the use and interpretation of power quality standards documents. As a practical aid to readers, the authors make a clear distinction between two types of power quality disturbances: * Variations: disturbances that are continuously present * Events: disturbances that occur occasionally A complete analysis and full set of tools are provided for each type of disturbance: * Detailed examination of the origin of the disturbance * Signal processing measurement techniques, including advanced techniques and those techniques set forth in standards documents * Interpretation and analysis of measurement data * Methods for further processing the features extracted from the signal processing into site and system indices The depth of coverage is outstanding: the authors present and analyze material that is not covered in the standards nor found in the scientific literature. This text is intended for two groups of readers: students and researchers in power engineering who need to use signal processing techniques for power system applications, and students and researchers in signal processing who need to perform power system disturbance analyses and diagnostics. It is also highly recommended for any engineer or utility professional involved in power quality monitoring.

Download or read book Adaptive Systems in Control and Signal Processing 1986 written by K.J. Aström and published by Elsevier. This book was released on 2016-07-21 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second IFAC workshop discusses the variety and applications of adaptive systems in control and signal processing. The various approaches to adaptive control systems are covered and their stability and adaptability analyzed. The volume also includes papers taken from two poster sessions to give a concise and comprehensive overview/treatment of this increasingly important field.