Download or read book Titanium Alloys written by Maciej Motyka and published by BoD – Books on Demand. This book was released on 2019-11-27 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium alloys, due to unique physical and chemical properties (mainly high relative strength combined with very good corrosion resistance), are considered as an important structural metallic material used in hi-tech industries (e.g. aerospace, space technology). This book provides information on new manufacturing and processing methods of single- and two-phase titanium alloys. The eight chapters of this book are distributed over four sections. The first section (Introduction) indicates the main factors determining application areas of titanium and its alloys. The second section (Manufacturing, two chapters) concerns modern production methods for titanium and its alloys. The third section (Thermomechanical and surface treatment, three chapters) covers problems of thermomechanical processing and surface treatment used for single- and two-phase titanium alloys. The fourth section (Machining, two chapters) describes the recent results of high speed machining of Ti-6Al-4V alloy and the possibility of application of sustainable machining for titanium alloys.
Download or read book Advanced Processes for High Strength Titanium Alloys written by and published by . This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In first part of this project, double Electron Beam Melting (EBM) was investigated for melting of high-strength alpha + beta and beta titanium alloys. The following advantages, as compared to Vacuum Arc Remelting (VAR), are expected: - full dissolution of LDl due to higher temperature and longer times in melt condition; - essential elimination of HDl by means of.
Download or read book Titanium Powder Metallurgy written by Ma Qian and published by Butterworth-Heinemann. This book was released on 2015-02-10 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium Powder Metallurgy contains the most comprehensive and authoritative information for, and understanding of, all key issues of titanium powder metallurgy (Ti PM). It summarizes the past, reviews the present and discusses the future of the science and technology of Ti PM while providing the world titanium community with a unique and comprehensive book covering all important aspects of titanium powder metallurgy, including powder production, powder processing, green shape formation, consolidation, property evaluation, current industrial applications and future developments. It documents the fundamental understanding and technological developments achieved since 1937 and demonstrates why powder metallurgy now offers a cost-effective approach to the near net or net shape fabrication of titanium, titanium alloys and titanium metal matrix composites for a wide variety of industrial applications. Provides a comprehensive and in-depth treatment of the science, technology and industrial practice of titanium powder metallurgy Each chapter is delivered by the most knowledgeable expert on the topic, half from industry and half from academia, including several pioneers in the field, representing our current knowledge base of Ti PM. Includes a critical review of the current key fundamental and technical issues of Ti PM. Fills a critical knowledge gap in powder metal science and engineering and in the manufacture of titanium metal and alloys
Download or read book Titanium Alloys written by Jan Sieniawski and published by BoD – Books on Demand. This book was released on 2013-05-15 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains six chapters and covers topics dealing with biomedical applications of titanium alloys, surface treatment, relationships between microstructure and mechanical and technological properties, and the effect of radiation on the structure of the titanium alloys.
Download or read book Titanium and Titanium Alloys written by Christoph Leyens and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an excellent reference for materials scientists and engineers needing to gain more knowledge about these engineering materials. Following introductory chapters on the fundamental materials properties of titanium, readers will find comprehensive descriptions of the development, processing and properties of modern titanium alloys. There then follows detailed discussion of the applications of titanium and its alloys in aerospace, medicine, energy and automotive technology.
Download or read book Titanium Alloys Basics And Applications written by Peng Cao and published by World Scientific. This book was released on 2024-05-28 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: At just half the weight of steel and nickel-based superalloys, titanium and its alloys stand out primarily due to their excellent corrosion resistance, high strength, and low density. Such distinctive properties make titanium attractive for a variety of applications, including aerospace, sports and leisure, and industrial uses.The book aims to cover important aspects of titanium metallurgy, from the basic characteristics of titanium to its advanced applications.The introductory chapter introduces the metallurgical background, physical and mechanical properties of titanium, with insights into specialty titanium alloys and titanium matrix composites. The book also discusses the correlation between microstructure and properties of titanium and its alloys along with various heat-treatment opportunities that exist for tailoring the properties to achieve excellent performance in a variety of products. Additionally, the variety of applications of titanium and its alloys in aerospace and non-aerospace markets are documented in detail.Serving an updated account of recent developments with respect to titanium and its alloys, this book is an excellent, timely, and comprehensive reference for materials scientist and engineers who wish to gain knowledge about these engineering materials.
Download or read book Machining of Titanium Alloys written by J. Paulo Davim and published by Springer. This book was released on 2014-07-05 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of examples illustrating the resent research advances in the machining of titanium alloys. These materials have excellent strength and fracture toughness as well as low density and good corrosion resistance; however, machinability is still poor due to their low thermal conductivity and high chemical reactivity with cutting tool materials. This book presents solutions to enhance machinability in titanium-based alloys and serves as a useful reference to professionals and researchers in aerospace, automotive and biomedical fields.
Download or read book Technical Abstract Bulletin written by and published by . This book was released on with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Materials for Next Generation Commercial Transports written by Committee on New Materials for Advanced Civil Aircraft and published by National Academies Press. This book was released on 1996-03-29 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major objective of this book was to identify issues related to the introduction of new materials and the effects that advanced materials will have on the durability and technical risk of future civil aircraft throughout their service life. The committee investigated the new materials and structural concepts that are likely to be incorporated into next generation commercial aircraft and the factors influencing application decisions. Based on these predictions, the committee attempted to identify the design, characterization, monitoring, and maintenance issues that are critical for the introduction of advanced materials and structural concepts into future aircraft.
Download or read book Modern Production Methods for Titanium Alloys written by Agripa Hamweendo and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium alloys are advanced structural materials for numerous key engineering applications in medicine (implants), aerospace, marine structures, and many other areas. The novel aspects of application potential for titanium alloys are as a result of their unique properties such as high corrosion resistance, high specific strength, low elastic modulus, high elasticity, and high hardness. This chapter examines the modern methods for production of titanium alloys. The goal of this chapter is to show the process engineers the current methods for production of titanium alloys necessary for modern applications. The chapter also presents the future methods of production for titanium and titanium alloys to meet the future demands of titanium and titanium alloys,Äô products.
Download or read book Advanced Joining Processes written by Lucas F. M. da Silva and published by Springer Nature. This book was released on 2020-03-31 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent material science-based and mechanical analysis-based advances in joining processes. It includes all related processes, e.g. friction stir welding, joining by plastic deformation, laser welding, clinch joining, and adhesive bonding, as well as hybrid joints. It gathers selected full-length papers from the 1st Conference on Advanced Joining Processes.
Download or read book Titanium written by Matthew J. Donachie and published by ASM International. This book was released on 2000 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to support the need of engineering, management, and other professionals for information on titanium by providing an overview of the major topics, this book provides a concise summary of the most useful information required to understand titanium and its alloys. The author provides a review of the significant features of the metallurgy and application of titanium and its alloys. All technical aspects of the use of titanium are covered, with sufficient metals property data for most users. Because of its unique density, corrosion resistance, and relative strength advantages over competing materials such as aluminum, steels, and superalloys, titanium has found a niche in many industries. Much of this use has occurred through military research, and subsequent applications in aircraft, of gas turbine engines, although more recent use features replacement joints, golf clubs, and bicycles.Contents include: A primer on titanium and its alloys, Introduction to selection of titanium alloys, Understanding titanium's metallurgy and mill products, Forging and forming, Castings, Powder metallurgy, Heat treating, Joining technology and practice, Machining, Cleaning and finishing, Structure/processing/property relationships, Corrosion resistance, Advanced alloys and future directions, Appendices: Summary table of titanium alloys, Titanium alloy datasheets, Cross-reference to titanium alloys, Listing of selected specification and standardization organizations, Selected manufacturers, suppliers, services, Corrosion data, Machining data.
Download or read book Cost Effective Titanium Component Technology for Leading Edge Performance written by C. M. Ward-Close and published by Wiley. This book was released on 2001-02-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium alloy processing and manufacturing methods Titanium's strength has made it a popular material for aerospace and other critical manufacturing, but the high cost of extraction had long rendered it less suitable for broader applications. Cost-Effective Titanium Component Technology for Leading Edge Performance explores the latest in titanium alloys, providing real-world solutions that bring titanium into medical, architectural, automotive, sporting goods, and other areas. These advanced alloys offer high temperature capacity and corrosion resistance four times better than stainless steel, making new designs and technologies possible through novel processing methods.
Download or read book Welding Process Development of High Strength Alloys written by John W. Biffl and published by . This book was released on 1971 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this program was to establish the use of several advanced welding processes for joining a select group of high strength alloys in thicknesses of 0.1 to 1.0 inch. Processes investigated were Electron Beam, Plasma, Pulsed GTA, and Hot Wire GTA. Steel alloys HY 130, D6AC, and 9Ni-4Co-0.3C were utilized for all processes. In addition, titanium alloy 6Al-6V-2Sn was included as part of the electron beam investigation. Each of the processes demonstrated the capability for achieving aerospace quality weldments in all materials. The processes were ranked according to their relative impact on production costs associated with total welding time, qulaity of weld, joint preparation, and distortion. Included in the report are descriptions of each process and the equipment utilized as well as detailed discussion of the development efforts. Evaluation of the weldments was performed non-destructively and destructively. NDT procedures included radiographic, ultrasonic, and magnetic particle methods. Mechanical testing included transverse and longitudinal tensiles and also determination of fracture toughness. A complete review of mechanical testing methods and test results are included, with emphasis on fracture toughness. (Author).
Download or read book Proceedings of the 13th World Conference on Titanium written by Vasisht Venkatesh and published by John Wiley & Sons. This book was released on 2016-04-26 with total page 4024 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the Proceedings of the 13th World Conference on Titanium.
Download or read book Additive Manufacturing of Titanium Alloys written by Bhaskar Dutta and published by Butterworth-Heinemann. This book was released on 2016-06-17 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing of Titanium Alloys: State of the Art, Challenges and Opportunities provides alternative methods to the conventional approach for the fabrication of the majority of titanium components produced via the cast and wrought technique, a process which involves a considerable amount of expensive machining. In contrast, the Additive Manufacturing (AM) approach allows very close to final part configuration to be directly fabricated minimizing machining cost, while achieving mechanical properties at least at cast and wrought levels. In addition, the book offers the benefit of significant savings through better material utilization for parts with high buy-to-fly ratios (ratio of initial stock mass to final part mass before and after manufacturing). As titanium additive manufacturing has attracted considerable attention from both academicians and technologists, and has already led to many applications in aerospace and terrestrial systems, as well as in the medical industry, this book explores the unique shape making capabilities and attractive mechanical properties which make titanium an ideal material for the additive manufacturing industry. Includes coverage of the fundamentals of microstructural evolution in titanium alloys Introduces readers to the various Additive Manufacturing Technologies, such as Powder Bed Fusion (PBF) and Directed Energy Deposition (DED) Looks at the future of Titanium Additive Manufacturing Provides a complete review of the science, technology, and applications of Titanium Additive Manufacturing (AM)
Download or read book Advanced Machining and Manufacturing Processes written by Kaushik Kumar and published by Springer. This book was released on 2018-04-17 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the various advanced manufacturing processes employed by manufacturing industries to improve their productivity in terms of socio-economic development. The authors present automated conventional and non-conventional machining techniques as well as virtual machining principles and techniques. Material removal by mechanical, chemical, thermal and electrochemical processes are described in detail. A glossary of key concepts is attached at end of the book.
