Download or read book Throughput Optimization in Robotic Cells written by Milind W. Dawande and published by Springer. This book was released on 2007-05-03 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Throughput Optimization In Robotic Cells provides practitioners, researchers, and students with up-to-date algorithmic results on sequencing of robot moves and scheduling of parts in robotic cells. It brings together the structural results developed over the last 25 years for the various realistic models of robotic cells. This book is ideally suited for use in a graduate course or a research seminar on robotic cells.
Download or read book Intelligent Scheduling of Robotic Flexible Assembly Cells written by Khalid Karam Abd and published by Springer. This book was released on 2015-11-08 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the design of Robotic Flexible Assembly Cell (RFAC) with multi-robots. Its main contribution consists of a new effective strategy for scheduling RFAC in a multi-product assembly environment, in which dynamic status and multi-objective optimization problems occur. The developed strategy, which is based on a combination of advanced solution approaches such as simulation, fuzzy logic, system modeling and the Taguchi optimization method, fills an important knowledge gap in the current literature and paves the way for future research towards the goal of employing flexible assembly systems as effectively as possible despite the complexity of their scheduling.
Download or read book Throughput Optimization in Robotic Cells written by Milind W. Dawande and published by Springer Science & Business Media. This book was released on 2007-05-04 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Throughput Optimization In Robotic Cells provides practitioners, researchers, and students with up-to-date algorithmic results on sequencing of robot moves and scheduling of parts in robotic cells. It brings together the structural results developed over the last 25 years for the various realistic models of robotic cells. This book is ideally suited for use in a graduate course or a research seminar on robotic cells.
Download or read book Advanced Engineering Optimization Through Intelligent Techniques written by Ravipudi Venkata Rao and published by Springer Nature. This book was released on with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Research on AI and Knowledge Engineering for Real Time Business Intelligence written by Hiran, Kamal Kant and published by IGI Global. This book was released on 2023-04-04 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial intelligence (AI) is influencing the future of almost every sector and human being. AI has been the primary driving force behind emerging technologies such as big data, blockchain, robots, and the internet of things (IoT), and it will continue to be a technological innovator for the foreseeable future. New algorithms in AI are changing business processes and deploying AI-based applications in various sectors. The Handbook of Research on AI and Knowledge Engineering for Real-Time Business Intelligence is a comprehensive reference that presents cases and best practices of AI and knowledge engineering applications on business intelligence. Covering topics such as deep learning methods, face recognition, and sentiment analysis, this major reference work is a dynamic resource for business leaders and executives, IT managers, AI scientists, students and educators of higher education, librarians, researchers, and academicians.
Download or read book Scheduling in Industry 4 0 and Cloud Manufacturing written by Boris Sokolov and published by Springer Nature. This book was released on 2020-06-08 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has resulted from the activities of IFAC TC 5.2 “Manufacturing Modelling for Management and Control”. The book offers an introduction and advanced techniques of scheduling applications to cloud manufacturing and Industry 4.0 systems for larger audience. This book uncovers fundamental principles and recent developments in the theory and application of scheduling methodology to cloud manufacturing and Industry 4.0. The purpose of this book is to present recent developments in scheduling in cloud manufacturing and Industry 4.0 and to systemize these developments in new taxonomies and methodological principles to shape this new research domain. This book addresses the needs of both researchers and practitioners to uncover the challenges and opportunities of scheduling techniques’ applications to cloud manufacturing and Industry 4.0. For the first time, it comprehensively conceptualizes scheduling in cloud manufacturing and Industry 4.0 systems as a new research domain. The chapters of the book are written by the leading international experts and utilize methods of operations research, industrial engineering and computer science. Such a multi-disciplinary combination is unique and comprehensively deciphers major problem taxonomies, methodologies, and applications to scheduling in cloud manufacturing and Industry 4.0.
Download or read book Intelligent Robotics and Applications written by Xianmin Zhang and published by Springer. This book was released on 2014-11-15 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two volume set LNAI 8917 and 8918 constitutes the refereed proceedings of the 7th International Conference on Intelligent Robotics and Applications, ICIRA 2014, held in Guangzhou, China, in December 2014. The 109 revised full papers presented were carefully reviewed and selected from 159 submissions. The papers aim at enhancing the sharing of individual experiences and expertise in intelligent robotics with particular emphasis on technical challenges associated with varied applications such as biomedical applications, industrial automations, surveillance, and sustainable mobility.
Download or read book Advanced Intelligent Computing Technology and Applications written by De-Shuang Huang and published by Springer Nature. This book was released on with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Technologies Development and Application II written by Isak Karabegović and published by Springer. This book was released on 2019-04-23 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features papers focusing on the implementation of new and future technologies, which were presented at the International Conference on New Technologies, Development and Application, held at the Academy of Science and Arts of Bosnia and Herzegovina in Sarajevo on 27th–29th June 2019. It covers a wide range of future technologies and technical disciplines, including complex systems such as Industry 4.0; robotics; mechatronics systems; automation; manufacturing; cyber-physical and autonomous systems; sensors; networks; control, energy, automotive and biological systems; vehicular networking and connected vehicles; effectiveness and logistics systems, smart grids, as well as nonlinear, power, social and economic systems. We are currently experiencing the Fourth Industrial Revolution “Industry 4.0”, and its implementation will improve many aspects of human life in all segments, and lead to changes in business paradigms and production models. Further, new business methods are emerging, transforming production systems, transport, delivery, and consumption, which need to be monitored and implemented by every company involved in the global market.
Download or read book Evolutionary Computation in Scheduling written by Amir H. Gandomi and published by John Wiley & Sons. This book was released on 2020-05-19 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents current developments in the field of evolutionary scheduling and demonstrates the applicability of evolutionary computational techniques to solving scheduling problems This book provides insight into the use of evolutionary computations (EC) in real-world scheduling, showing readers how to choose a specific evolutionary computation and how to validate the results using metrics and statistics. It offers a spectrum of real-world optimization problems, including applications of EC in industry and service organizations such as healthcare scheduling, aircraft industry, school timetabling, manufacturing systems, and transportation scheduling in the supply chain. It also features problems with different degrees of complexity, practical requirements, user constraints, and MOEC solution approaches. Evolutionary Computation in Scheduling starts with a chapter on scientometric analysis to analyze scientific literature in evolutionary computation in scheduling. It then examines the role and impacts of ant colony optimization (ACO) in job shop scheduling problems, before presenting the application of the ACO algorithm in healthcare scheduling. Other chapters explore task scheduling in heterogeneous computing systems and truck scheduling using swarm intelligence, application of sub-population scheduling algorithm in multi-population evolutionary dynamic optimization, task scheduling in cloud environments, scheduling of robotic disassembly in remanufacturing using the bees algorithm, and more. This book: Provides a representative sampling of real-world problems currently being tackled by practitioners Examines a variety of single-, multi-, and many-objective problems that have been solved using evolutionary computations, including evolutionary algorithms and swarm intelligence Consists of four main parts: Introduction to Scheduling Problems, Computational Issues in Scheduling Problems, Evolutionary Computation, and Evolutionary Computations for Scheduling Problems Evolutionary Computation in Scheduling is ideal for engineers in industries, research scholars, advanced undergraduates and graduate students, and faculty teaching and conducting research in Operations Research and Industrial Engineering.
Download or read book Control Problems in Robotics and Automation written by Bruno Siciliano and published by Springer. This book was released on 2014-03-12 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on the important control problems in state-of-the-art robotics and automation, this volume features invited papers from a workshop held at CDC, San Diego, California. As well as looking at current problems, it aims to identify and discuss challenging issues that are yet to be solved but which will be vital to future research directions. The many topics covered include: automatic control, distributed multi-agent control, multirobots, dexterous hands, flexible manipulators, walking robots, free-floating systems, nonholonomic robots, sensor fusion, fuzzy control, virtual reality, visual servoing, and task synchronization. Control Problems in Robotics and Automation will be of interest to all researchers, scientists and graduate students who wish to broaden their knowledge in robotics and automation and prepare themselves to address and resolve the control problems that will be faced in this field as we enter the twenty-first century.
Download or read book IAENG Transactions on Engineering Sciences written by Sio-Iong Ao and published by CRC Press. This book was released on 2014-04-07 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two large international conferences on Advances in Engineering Sciences were held in Hong Kong, March 13-15, 2013, under the International MultiConference of Engineers and Computer Scientists (IMECS 2013), and in London, U.K., 3-5 July, 2013, under the World Congress on Engineering 2013 (WCE 2013) respectively. IMECS 2013 and WCE 2013 were organize
Download or read book Highlights on Practical Applications of Agents and Multi Agent Systems written by Juan Manuel Corchado Rodríguez and published by Springer. This book was released on 2013-04-17 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the Workshops which complemented the 11th International Conference on Practical Applications of Agents and Multi-Agent Systems, PAAMS 2013, held in Salamanca, Spain, in May 2013. This volume presents the papers that have been accepted for the workshops: Workshop on Agent-based Approaches for the Transportation Modeling and Optimization, Workshop on Agent-Based Solutions for Manufacturing and Supply Chain, Workshop on User-Centric Technologies and Applications, Workshop on Conflict Resolution in Decision Making, Workshop on Multi-Agent System Based Learning Environments, Workshop on Multi-agent based Applications for Sustainable Energy Systems, Workshop on Agents and multi-agent Systems for AAL and e-Health
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1985 with total page 1052 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Soft Computing in Smart Manufacturing written by Tatjana Sibalija and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-12-06 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims at addressing the challenges of contemporary manufacturing in Industry 4.0 environment and future manufacturing (aka Industry 5.0), by implementing soft computing as one of the major sub-fields of artificial intelligence. It contributes to development and application of the soft computing systems, including links to hardware, software and enterprise systems, in resolving modern manufacturing issues in complex, highly dynamic and globalized industrial circumstances. It embraces heterogeneous complementary aspects, such as control, monitoring and modeling of different manufacturing tasks, including intelligent robotic systems and processes, addressed by various machine learning and fuzzy techniques; modeling and parametric optimization of advanced conventional and non-conventional, eco-friendly manufacturing processes by using machine learning and evolutionary computing techniques; cybersecurity framework for Internet of Things-based systems addressing trustworthiness and resilience in machine-to-machine and human-machine collaboration; static and dynamic digital twins integration and synchronization in a smart factory environment; STEP-NC technology for a smart machine vision system, and integration of Open CNC with Service-Oriented Architecture for STEP-NC monitoring system in a smart manufacturing. Areas of interest include but are not limited to applications of soft computing to address the following: dynamic process/system modeling and simulation, dynamic process/system parametric optimization, dynamic planning and scheduling, smart, predictive maintenance, intelligent and autonomous systems, improved machine cognition, effective digital twins integration, human-machine collaboration, robots, and cobots.
Download or read book Heuristics Metaheuristics and Approximate Methods in Planning and Scheduling written by Ghaith Rabadi and published by Springer. This book was released on 2016-01-27 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scope of this book is limited to heuristics, metaheuristics, and approximate methods and algorithms as applied to planning and scheduling problems. While it is not possible to give a comprehensive treatment of this topic in one book, the aim of this work is to provide the reader with a diverse set of planning and scheduling problems and different heuristic approaches to solve them. The problems range from traditional single stage and parallel machine problems to more modern settings such as robotic cells and flexible job shop networks. Furthermore, some chapters deal with deterministic problems while some others treat stochastic versions of the problems. Unlike most of the literature that deals with planning and scheduling problems in the manufacturing and production environments, in this book the environments were extended to nontraditional applications such as spatial scheduling (optimizing space over time), runway scheduling, and surgical scheduling. The solution methods used in the different chapters of the book also spread from well-established heuristics and metaheuristics such as Genetic Algorithms and Ant Colony Optimization to more recent ones such as Meta-RaPS.
Download or read book Industry 4 0 The Power of Data written by Luis R. Izquierdo and published by Springer Nature. This book was released on 2023-07-07 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of some of the best papers presented at the 15th International Conference on Industrial Engineering and Industrial Management in 2021. The Conference was promoted by ADINGOR (Asociación para el Desarrollo de la Ingeniería de Organización), organized by the University of Burgos, and it took place online on July 8 and 9, 2021. The book highlights some of the latest research advances and cutting-edge analyses of real-world case studies on industrial engineering and industrial management from a wide range of international contexts. It also identifies business applications and the latest findings and innovations in operations management and decision sciences. Industry 4.0: The Power of Data will help academic researchers and practitioners in industrial engineering and industrial management to keep abreast of state-of-the-art developments in these subjects.
