Download or read book Advanced Nuclear Plant Control Room Complex written by and published by . This book was released on 1993 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: An advanced control room complex for a nuclear power plant, including a discrete indicator and alarm system (72) which is nuclear qualified for rapid response to changes in plant parameters and a component control system (64) which together provide a discrete monitoring and control capability at a panel (14-22, 26, 28) in the control room (10). A separate data processing system (70), which need not be nuclear qualified, provides integrated and overview information to the control room and to each panel, through CRTs (84) and a large, overhead integrated process status overview board (24). The discrete indicator and alarm system (72) and the data processing system (70) receive inputs from common plant sensors and validate the sensor outputs to arrive at a representative value of the parameter for use by the operator during both normal and accident conditions, thereby avoiding the need for him to assimilate data from each sensor individually. The integrated process status board (24) is at the apex of an information hierarchy that extends through four levels and provides access at each panel to the full display hierarchy. The control room panels are preferably of a modular construction, permitting the definition of inputs and outputs, the man machine interface, and the plant specific algorithms, to proceed in parallel with the fabrication of the panels, the installation of the equipment and the generic testing thereof.
Download or read book Advanced Nuclear Plant Control Complex written by and published by . This book was released on 1993 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: An advanced control room complex for a nuclear power plant, including a discrete indicator and alarm system (72) which is nuclear qualified for rapid response to changes in plant parameters and a component control system (64) which together provide a discrete monitoring and control capability at a panel (14-22, 26, 28) in the control room (10). A separate data processing system (70), which need not be nuclear qualified, provides integrated and overview information to the control room and to each panel, through CRTs (84) and a large, overhead integrated process status overview board (24). The discrete indicator and alarm system (72) and the data processing system (70) receive inputs from common plant sensors and validate the sensor outputs to arrive at a representative value of the parameter for use by the operator during both normal and accident conditions, thereby avoiding the need for him to assimilate data from each sensor individually. The integrated process status board (24) is at the apex of an information hierarchy that extends through four levels and provides access at each panel to the full display hierarchy. The control room panels are preferably of a modular construction, permitting the definition of inputs and outputs, the man machine interface, and the plant specific algorithms, to proceed in parallel with the fabrication of the panels, the installation of the equipment and the generic testing thereof.
Download or read book Indicator System for Advanced Nuclear Plant Control Complex written by and published by . This book was released on 1993 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: An advanced control room complex for a nuclear power plant, including a discrete indicator and alarm system (72) which is nuclear qualified for rapid response to changes in plant parameters and a component control system (64) which together provide a discrete monitoring and control capability at a panel (14-22, 26, 28) in the control room (10). A separate data processing system (70), which need not be nuclear qualified, provides integrated and overview information to the control room and to each panel, through CRTs (84) and a large, overhead integrated process status overview board (24). The discrete indicator and alarm system (72) and the data processing system (70) receive inputs from common plant sensors and validate the sensor outputs to arrive at a representative value of the parameter for use by the operator during both normal and accident conditions, thereby avoiding the need for him to assimilate data from each sensor individually. The integrated process status board (24) is at the apex of an information hierarchy that extends through four levels and provides access at each panel to the full display hierarchy. The control room panels are preferably of a modular construction, permitting the definition of inputs and outputs, the man machine interface, and the plant specific algorithms, to proceed in parallel with the fabrication of the panels, the installation of the equipment and the generic testing thereof.
Download or read book Instrumentation and Control Systems for Nuclear Power Plants written by Mauro Cappelli and published by Woodhead Publishing. This book was released on 2023-03-21 with total page 1114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instrumentation and Control Systems for Nuclear Power Plants provides the latest innovative research onthe design of effective modern I&C systems for both existing and newly commissioned plants, along withinformation on system implementation. Dr. Cappelli and his team of expert contributors cover fundamentals,explore the most advanced research in control systems technology, and tackle topics such as the human–machine interface, control room redesign, and control modeling. The inclusion of codes and standards,inspection procedures, and regulatory issues ensure that the reader can confidently design their own I&Csystems and integrate them into existing nuclear sites and projects. Covers various viewpoints, including theory, modeling, design and applications of I&C systems Includes codes and standards, inspection procedures and regulatory issues Combines engineering and physics aspects in one thorough resource, presenting human factors, modeling and HMI together for the first time Instrumentation and Control Systems for Nuclear Power Plants highlights the key role nuclear energy plays in the transition to a lower-carbon energy mix
Download or read book The Study on Operator instrumentation Interfaces in Advanced Nuclear Power Plant Control Room written by Jih-Hao Guh and published by . This book was released on 1981 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Pilot Study Investigating the Effects of Advanced Nuclear Power Plant Control Room Technologies written by and published by . This book was released on 2015 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control room modernization is an important part of life extension for the existing light water reactor fleet. None of the 99 currently operating commercial nuclear power plants in the U.S. has completed a full-scale control room modernization to date. Nuclear power plant main control rooms for the existing commercial reactor fleet remain significantly analog, with only limited digital modernizations. Upgrades in the U.S. do not achieve the full potential of newer technologies that might otherwise enhance plant and operator performance. The goal of the control room upgrade benefits research is to identify previously overlooked benefits of modernization, identify candidate technologies that may facilitate such benefits, and demonstrate these technologies through human factors research. This report describes a pilot study to test upgrades to the Human Systems Simulation Laboratory at INL.
Download or read book Deployment of a Full Scope Commercial Nuclear Power Plant Control Room Simulator at the Idaho National Laboratory written by and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The INL operates the HSSL to conduct research in the design and evaluation of advanced reactor control rooms, integration of intelligent support systems to assist operators, development and assessment of advanced human performance models, and visualizations to assess advanced operational concepts across various infrastructures. This advanced facility consists of a reconfigurable simulator and a virtual reality capability (known as the Computer-Aided Virtual Environment (CAVE)) (Figure 2). It supports human factors research, including human-in-the-loop performance, HSI, and analog and digital hybrid control displays. It can be applied to the development and evaluation of control systems and displays for complex systems such as existing and advanced NPP control rooms, command and control systems, and advance emergency operations centers. The HSSL incorporates a reconfigurable control room simulator, which is currently housed in the Center for Advanced Energy Studies (CAES), a joint venture of the DOE and the Idaho University System. The simulator is a platform- and plant-neutral environment intended for full-scope and part-task testing of operator performance in various control room configurations. The simulator is not limited to a particular plant or even simulator architecture. It can support engineering simulator platforms from multiple vendors using digital interfaces. Due to its ability to be reconfigured, it is possible to switch the HSI - not just to digital panels but also to different control modalities such as those using greater plant automation or intelligent alarm filtering. The simulator currently includes three operator workstations, each capable of driving up to eight 30-inch monitors. The size and number of monitors varies depending on the particular front-end simulator deployed for a simulator study. These operator workstations would typically be used for the shift supervisor or senior reactor operator, reactor operator, and assistant reactor operator in current US NPPs. In addition to the three workstations, information can be shared between the workstations and further displayed on a large-screen overview display or a panel mimic. An 82-inch high-definition display is commonly used for the overview display.
Download or read book The Advanced Controls Program at Oak Ridge National Laboratory written by and published by . This book was released on 1990 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Oak Ridge National Laboratory (ORNL), under sponsorship of the US Department of Energy (DOE), is conducting research that will lead to advanced, automated control of new liquid-metal-reactor (LMR) nuclear power plants. Although this program of research (entitled the Advanced Controls Program'') is focused on LMR technology, it will be capable of providing control design, test, and qualification capability for other advanced reactor designs (e.g., the advanced light water reactor (ALWR) and high temperature gas-cooled reactor (HTGR) designs), while also benefiting existing nuclear plants. The Program will also have applicability to complex, non-nuclear process control environments (e.g., petrochemical, aerospace, etc.). The Advanced Controls Program will support capabilities throughout the entire plant design life cycle, i.e., from the initial interactive first-principle dynamic model development for the process, systems, components, and instruments through advanced control room qualification. The current program involves five principal areas of research activities: (1) demonstrations of advanced control system designs, (2) development of an advanced controls design environment, (3) development of advanced control strategies, (4) research and development (R D) in human-system integration for advanced control system designs, and (5) testing and validation of advanced control system designs. Discussion of the research in these five areas forms the basis of this paper. Also included is a description of the research directions of the program. 8 refs.
Download or read book NUREG CR written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1977 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Materials for Generation IV Nuclear Reactors written by Pascal Yvon and published by Woodhead Publishing. This book was released on 2016-08-27 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: Operating at a high level of fuel efficiency, safety, proliferation-resistance, sustainability and cost, generation IV nuclear reactors promise enhanced features to an energy resource which is already seen as an outstanding source of reliable base load power. The performance and reliability of materials when subjected to the higher neutron doses and extremely corrosive higher temperature environments that will be found in generation IV nuclear reactors are essential areas of study, as key considerations for the successful development of generation IV reactors are suitable structural materials for both in-core and out-of-core applications. Structural Materials for Generation IV Nuclear Reactors explores the current state-of-the art in these areas. Part One reviews the materials, requirements and challenges in generation IV systems. Part Two presents the core materials with chapters on irradiation resistant austenitic steels, ODS/FM steels and refractory metals amongst others. Part Three looks at out-of-core materials. Structural Materials for Generation IV Nuclear Reactors is an essential reference text for professional scientists, engineers and postgraduate researchers involved in the development of generation IV nuclear reactors. Introduces the higher neutron doses and extremely corrosive higher temperature environments that will be found in generation IV nuclear reactors and implications for structural materials Contains chapters on the key core and out-of-core materials, from steels to advanced micro-laminates Written by an expert in that particular area
Download or read book Nuclear Power written by National Research Council and published by National Academies Press. This book was released on 1992-02-01 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The construction of nuclear power plants in the United States is stopping, as regulators, reactor manufacturers, and operators sort out a host of technical and institutional problems. This volume summarizes the status of nuclear power, analyzes the obstacles to resumption of construction of nuclear plants, and describes and evaluates the technological alternatives for safer, more economical reactors. Topics covered include: Institutional issues-including regulatory practices at the federal and state levels, the growing trends toward greater competition in the generation of electricity, and nuclear and nonnuclear generation options. Critical evaluation of advanced reactors-covering attributes such as cost, construction time, safety, development status, and fuel cycles. Finally, three alternative federal research and development programs are presented.
Download or read book Method of Installing a Control Room Console in a Nuclear Power Plant written by and published by . This book was released on 1994 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: An advanced control room complex for a nuclear power plant, including a discrete indicator and alarm system (72) which is nuclear qualified for rapid response to changes in plant parameters and a component control system (64) which together provide a discrete monitoring and control capability at a panel (14-22, 26, 28) in the control room (10). A separate data processing system (70), which need not be nuclear qualified, provides integrated and overview information to the control room and to each panel, through CRTs (84) and a large, overhead integrated process status overview board (24). The discrete indicator and alarm system (72) and the data processing system (70) receive inputs from common plant sensors and validate the sensor outputs to arrive at a representative value of the parameter for use by the operator during both normal and accident conditions, thereby avoiding the need for him to assimilate data from each sensor individually. The integrated process status board (24) is at the apex of an information hierarchy that extends through four levels and provides access at each panel to the full display hierarchy. The control room panels are preferably of a modular construction, permitting the definition of inputs and outputs, the man machine interface, and the plant specific algorithms, to proceed in parallel with the fabrication of the panels, the installation of the equipment and the generic testing thereof.
Download or read book Digital Instrumentation and Control Systems in Nuclear Power Plants written by National Research Council and published by National Academies Press. This book was released on 1997-04-18 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nuclear industry and the U.S. Nuclear Regulatory Commission (USNRC) have been working for several years on the development of an adequate process to guide the replacement of aging analog monitoring and control instrumentation in nuclear power plants with modern digital instrumentation without introducing off-setting safety problems. This book identifies criteria for the USNRC's review and acceptance of digital applications in nuclear power plants. It focuses on eight areas: software quality assurance, common-mode software failure potential, systems aspects of digital instrumentation and control technology, human factors and human-machine interfaces, safety and reliability assessment methods, dedication of commercial off-the-shelf hardware and software, the case-by-case licensing process, and the adequacy of technical infrastructure.
Download or read book Lessons Learned from the Fukushima Nuclear Accident for Improving Safety of U S Nuclear Plants written by National Research Council (U.S.). Committee on Lessons Learned from the Fukushima Nuclear Accident for Improving Safety and Security of U.S. Nuclear Plants and published by National Academy Press. This book was released on 2014-10-29 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: The March 11, 2011, Great East Japan Earthquake and tsunami sparked a humanitarian disaster in northeastern Japan. They were responsible for more than 15,900 deaths and 2,600 missing persons as well as physical infrastructure damages exceeding $200 billion. The earthquake and tsunami also initiated a severe nuclear accident at the Fukushima Daiichi Nuclear Power Station. Three of the six reactors at the plant sustained severe core damage and released hydrogen and radioactive materials. Explosion of the released hydrogen damaged three reactor buildings and impeded onsite emergency response efforts. The accident prompted widespread evacuations of local populations, large economic losses, and the eventual shutdown of all nuclear power plants in Japan. "Lessons Learned from the Fukushima Nuclear Accident for Improving Safety and Security of U.S. Nuclear Plants" is a study of the Fukushima Daiichi accident. This report examines the causes of the crisis, the performance of safety systems at the plant, and the responses of its operators following the earthquake and tsunami. The report then considers the lessons that can be learned and their implications for U.S. safety and storage of spent nuclear fuel and high-level waste, commercial nuclear reactor safety and security regulations, and design improvements. "Lessons Learned" makes recommendations to improve plant systems, resources, and operator training to enable effective ad hoc responses to severe accidents. This report's recommendations to incorporate modern risk concepts into safety regulations and improve the nuclear safety culture will help the industry prepare for events that could challenge the design of plant structures and lead to a loss of critical safety functions. In providing a broad-scope, high-level examination of the accident, "Lessons Learned" is meant to complement earlier evaluations by industry and regulators. This in-depth review will be an essential resource for the nuclear power industry, policy makers, and anyone interested in the state of U.S. preparedness and response in the face of crisis situations.
Download or read book Role of Personnel and Advanced Control Rooms in Future Nuclear Power Plants written by U.S. Nuclear Regulatory Commission. Office of the Secretary and published by . This book was released on 1991 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Executive Summary of the Working Conference on Advanced Electrotechnology Applications to Nuclear Power Plants January 15 17 1980 Washington D C written by and published by . This book was released on 1980 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Holistic Investigation of Complexity Sources in Nuclear Power Plant Control Rooms written by Farzan Sasangohar and published by . This book was released on 2011 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nuclear power community in the United States is moving to modernize aging power plant control rooms as well as develop control rooms for new reactors. New generation control rooms, along with modernized control rooms, will rely more heavily on automation and computerized procedures. Of particular importance to the Nuclear Regulatory Commission (NRC) is the impact such modernizations or new technologies will have upon operator performance and reliability in these safety-critical control room environments. One specific area of interest is the effect that various complexities in the control room have on operator performance and reliability. This research identifies various definitions of complexity and characterizes complexity in the nuclear power plant (NPP) domain, focusing on the common complexity dimensions of number, variety, and interconnections. Based on this characterization of complexity, a comprehensive list of complexity sources within the NPP control room is presented, along with a novel approach to describe complexity source interconnections. Understanding the sources of complexity in advanced NPP control rooms and the associated effects on human reliability is critical for ensuring safe performance of both operators and the entire system. However, most of the previous approaches in investigating complexity typically focus on either objective or subjective views of complexity, and a systematic approach that considers both views is missing from previous approaches. This research provides a novel methodology to assess the sources of complexity in NPP control rooms both objectively and subjectively while understanding the difference between the two and introduces a systems theoretic descriptive model of these sources of complexity, leveraging network theory. Finally a method is introduced to investigate the differences between the complexity views of different groups of NPP stakeholders. Incident report databases and in particular, 22 nuclear incidents in the Human Event Repository and Analysis (HERA) database were parsed to find objective evidence for the identified sources. Using this evidence-based approach, some of the potential interactions between these sources could be captured. A network called "Complexity Source Network" (CSN) was created for each incident in HERA to present the sources (nodes) and potential interactions between them (links). An ensemble of networks was developed consisting of 22 CSNs, one for each of the incidents in HERA. A tool called CXViz was developed to visualize and analyze the CSNs. Using the aggregate network (22 CSNs combined) the most common sources and interactions were identified. The complexity views of three groups of stakeholders, namely Operators, Designers and NRC Reviewers, were collected using a survey tool called CXSurvey. Using this tool, the interviewees were asked to rate the identified sources of perceived complexity and to rank the top five in terms of contribution to perceived complexity. Data gathered from 16 operators, 8 designers and 3 NRC reviewers were collected and the top five sources identified by each group were compared to the top five most supported sources from the 22 incidents in HERA. The results show large variations between the subjective views of the operators and designers and the objective top five. In addition, the subjective source rating of the three groups of stakeholders were compared. The results show large variations between the complexity views between the stakeholders on some controversial sources such as boredom, and training.
